Search Results (25)

Background: It is known that the α-hydroxyphosphonates and their derivatives may have potential biological activity. Methods: Within the prominent class of α-hydroxyphosphonates, α-hydroxy-alkylphosphonates and their derivatives were prepared as new representatives in the hope of obtaining biologically active species. During our work the Pudovik reaction, acylation and phosphinoylation/phosphorylation methods were used. The new compounds were characterized by NMR and MS spectroscopy. The antiproliferative effects were tested on U266 (myeloma multiplex) and A2058 (melanoma) cells. Results: Ethyl methyl ketone–dialkyl phosphite and secondary phosphine oxide adducts were synthesized by the Pudovik reaction on the earlier analogy of acetaldehyde– and acetone adducts. The hydroxyphosphonates and hydroxyphosphine oxides were acylated and phosphinoylated/phosphorylated. Due to the steric hindrance in the case of the preparation of the acetone–and ethyl methyl ketone–diethyl phosphite adducts, a two-step procedure was elaborated that was also suitable for the thiophosphinoylation of the adducts. A part of the α-hydroxyphosphonates could be successfully methanesulfonylated. The new derivatives prepared were tested on myeloma and melanoma cells, and it was found that the antiproliferative activity is primarily driven by phosphinoylation, particularly by diphenylthiophosphinoylation. The most promising compound, the diphenylthiophosphinoylated hydroxyphosphine oxide, reduced the viability of the U266 cells to less than 20% after a treatment with 100 µM concentration in a long-term experiment. Conclusions: A subset of the synthesized α-hydroxyphosphonate derivatives exhibited cytotoxic activity, supporting further structural optimization to identify compounds with enhanced biological efficacy. Full article

Potentially biologically active α-aminophosphonic derivatives were prepared by the Kabachnik–Fields condensation of α-amino-α-aryl-methylphosphonates, arylaldehydes, and diethyl phosphite to afford bis(α-aryl-methylphosphonoyl)-amines as a mixture of racemic and meso isomers. To go “green”—performing the transformations under microwave irradiation—there was no need for a catalyst. On the other hand, the phospha-Mannich reaction of α-amino-α-phenyl-methylphosphonate with arylaldehydes led to (α-aryl-methylphosphonoyl)-(α-phenyl-methylphosphonoyl)-amines as a mixture of SS/RR and SR/RS racemates. Moreover, the respective symmetric products with identical aryl groups were also present. The outcome was similar, when α-amino-α-aryl-methyl-phosphonates were condensed with benzaldehyde and diethyl phosphite. The products were analyzed by 1D and 2D NMR spectroscopy. The combined NMR analysis of the products confirmed their structure. Full article

Background: Thirty-five analogues of a promising antiosteoporotic drug, incadronate, have been synthesized and evaluated for their antiproliferative activity against mouse macrophage-like J774E cells. These cells originated from identical precursors as osteoclasts and served to select the most active compounds. Two of them, n-heptyl- and n-octyl-aminomethylenebispohosphonic acids, were then used for the medication of sheep with induced osteoporosis. They demonstrated mild antiosteoporotic activity that was documented using bone histopathology. Additionally, a decrease in the immunological response to Corynebacterium pseudotuberculosis was observed as a major side effect accompanied by this medication. Methods: Aminomethylenebisphosphonates may be obtained in the three-component reaction of aliphatic amine, triethyl orthoformate and diethyl phosphite with the further acid hydrolysis of crude esters. The obtained N-substituted alkiloaminomethylenebisphosphonic acids are presented alongside with their in vitro activity toward mouse macrophages J774E. Results: The new families of aminomethylenebisphosphonic compounds synthesized by our approach may be of practical importance due to the significant cytotoxic activity in the cell cultures investigated. Two of them were chosen for further evaluation in the treatment of induced osteoporosis in sheep. Conclusions: In vivo studies confirmed the mild therapeutic effects of compounds 4 (N-(n-heptylamino)methylenebisphosphonic acid and 5 (N-(n-octylamino)methylenebisphosphonic acid; however, they are not suitable analogues of incadronate for consideration as potential drugs. Full article

Rapid on-site detection of chemical warfare agents (CWAs) is vital for security and environmental monitoring. In this work, copper(I) oxide (Cu₂O) nanowire (NW) chemiresistors were investigated as gas sensors for low-concentration organophosphorus chemical warfare agent (CWA) simulants. The NWs were hydrothermally synthesized and deposited onto microheater platforms, enabling them to operate at elevated working temperatures. Their sensing performance was tested against a range of vapor-phase simulants, including dimethyl methylphosphonate (DMMP), triethyl phosphate (TEP), diethyl ethylphosphonate (DEEP), diphenyl phosphoryl chloride (DPPCl), parathion, diethyl phosphite (DEP), diethyl adipate (DEA), and cyanogen chloride (ClCN). Fully oxidized P(V) simulants (DMMP, DEEP, TEP) produced modest, predominantly reversible responses (~3–6% RR). On the contrary, DPPCl and DEP induced the strongest relative responses (RR −94.67% and >200%, respectively), accompanied by irreversible surface modification as revealed by SEM and EDS. ClCN produced a substantial but reversible negative response (RR −9.5%), consistent with transient oxidative interactions. Surface poisoning was confirmed after exposure to DEP and DPPCl, which left phosphorus or chlorine residues on the Cu₂O surface. These results highlight both the promise and limitations of Cu₂O NW chemiresistors for selective CWA detection. Full article

Background: α-Hydroxyphosphonates, one of the most prominent classes of phosphonates, remain of utmost importance because of their potential and real biological activity as pharmaceutical or pesticide agents. The effect is the consequence of their enzyme inhibitory properties. Objectives: It was planned to make available new heterocyclic hydroxyphosphonate derivatives with cytotoxic activity. Methods: After optimizing the synthesis, 23 members of a new family, α-hydroxy-α-(benzothiophen-2-yl)-methylphosphonates, were prepared by the Pudovik reaction of benzo[b]thiophene-2-carboxaldehydes and diethyl phosphite. The addition was performed at 26 °C in the presence of triethylamine as the catalyst. One of the products was also characterized by single-crystal X-ray analysis. Results: The cytotoxic effect of the α-hydroxy-α-benzothiophenyl-methylphosphonates was tested on U266 myeloma, A2058 melanoma, HT-29 colon, and EBC-1 lung cancer cell lines. Most of the molecules showed significant activity; the greatest effects were seen after treatment with hydroxyphosphonates with a trifluoromethyl group in the benzene ring. Conclusions: The cytotoxic activity of the newly synthesized α-hydroxyphosphonates is encouraging to find even better derivatives. Full article

Next-generation recycling technologies must be urgently innovated to tackle huge volumes of spent batteries, photovoltaic panels or printed circuit boards (WPCBs). Current e-waste recycling industrial technology is dominated by traditional recycling technologies. Herein, ionic liquids (ILs), deep eutectic solvents (DESs) and promising oxidizing additives that can overcome some traditional recycling methods of metal ions from e-waste, used in our works from last year, are presented. The unique chemical environments of ILs and DESs, with the application of low-temperature extraction procedures, are important environmental aspects known as “Green Methods”. A closed-loop system for recycling zinc and manganese from the “black mass” (BM) of waste, Zn-MnO₂ batteries, is presented. The leaching process achieves a high efficiency and distribution ratio using the composition of two solvents (Cyanex 272 + diethyl phosphite (DPh)) for Zn(II) extraction. High extraction efficiency with 100% zinc and manganese recovery is also achieved using DESs (cholinum chloride/lactic acid, 1:2, DES 1, and cholinum chloride/malonic acid, 1:1, DES 2). New, greener recycling approaches to metal extraction from the BM of spent Li-ion batteries are presented with ILs ([N_8,8,8,1][Cl], (Aliquat 336), [P_6,6,6,14][Cl], [P_6,6,6,14][SCN] and [Benzet][TCM]) eight DESs, Cyanex 272 and D2EHPA. A high extraction efficiency of Li(I) (41–92 wt%) and Ni(II) (37–52 wt%) using (Cyanex 272 + DPh) is obtained. The recovery of Ni(II) and Cd(II) from the BM of spent Ni-Cd batteries is also demonstrated. The extraction efficiency of DES 1 and DES 2, contrary to ILs ([P_6,6,6,14][Cl] and [P_6,6,6,14][SCN]), is at the level of 30 wt% for Ni(II) and 100 wt% for Cd(II). In this mini-review, the option to use ILs, DESs and Cyanex 272 for the recovery of valuable metals from end-of-life WPCBs is presented. Next-generation recycling technologies, in contrast to the extraction of metals from acidic leachate preceded by thermal pre-treatment or from solid material only after thermal pre-treatment, have been developed with ILs and DESs using the ABS method, as well as Cyanex 272 (only after the thermal pre-treatment of WPCBs), with a process efficiency of 60–100 wt%. In this process, four new ILs are used: didecyldimethylammonium propionate, [N_10,10,1,1][C₂H₅COO], didecylmethylammonium hydrogen sulphate, [N_10,10,1,H][HSO₄], didecyldimethylammonium dihydrogen phosphate, [N_10,10,1,1][H₂PO₄], and tetrabutylphosphonium dihydrogen phosphate, [P_4,4,4,4][H₂PO₄]. The extraction of Cu(II), Ag(I) and other metals such as Al(III), Fe(II) and Zn(II) from solid WPCBs is demonstrated. Various additives are used during the extraction processes. The Analyst 800 atomic absorption spectrometer (FAAS) is used for the determination of metal content in the solid BM. The ICP-OES method is used for metal analysis. The obtained results describe the possible application of ILs and DESs as environmental media for upcycling spent electronic wastes. Full article

The so far unattended version of the Hirao reaction involving the coupling of the less reactive chloroarenes with >P(O)H reagents, such as diarylphosphine oxides, diethyl phosphite, and ethyl phenyl-H-phosphinate, was investigated in detail using Pd(OAc)₂ as the catalyst precursor, and applying some excess of the P-reagent to provide the ligand via its trivalent tautomeric (>P-OH) form. In the presence of triethylamine, no P–C coupling took place, meaning that there was a need for a stronger base, an alkali carbonate. The solvent had a significant effect on the efficiency of the Hirao reaction. The optimum conditions (10% of the Pd(OAc)₂, 1.3 equiv. of the P-reagent, 1.1 equiv. of the alkali carbonate, 135–150 °C) explored herein were applied in the synthesis of diaryl-phenylphosphine oxides, aryl-diphenylphosphine oxides, diethyl arylphosphonates, and ethyl diphenylphosphinate. Theoretical calculations performed at the M06-2X/6-31G(d,p)[PCM(MeCN)] level also justified coupling with the chloroarenes under appropriate conditions, and were in accord with the experimental results revealing the unsuitability of triethylamine as a base and the need for an alkali carbonate. The new protocol elaborated herein is more practical and “greener” than the version with bromoarenes, and embraces a wide substrate scope. Full article

A series of α-hydroxy-alkylphosphonates and α-hydroxy-alkylphosphine oxides were synthesized by the Pudovik reaction of acetaldehyde and acetone with dialkyl phosphites or diarylphosphine oxides. The additions were performed in three different ways: in liquid phase using triethylamine as the catalyst (1), on the surface of Al₂O₃/KF solid catalyst (2), or by a MW-assisted Na₂CO₃-catalyzed procedure (3). In most of the cases, our methods were more efficient and more robust than those applied in the literature. Two of the α-hydroxy-alkylphosphonates were subjected to single-crystal X-ray analysis, suggesting a dimeric and a chain supramolecular buildup in their respective crystals. Four α-hydroxy-alkylphosphonates and one α-hydroxy-ethylphosphine oxide were reacted with different acid chlorides to afford ten α-acyloxyphosphonates. Diethyl α-hydroxy-ethylphosphonate was transformed to the methanesulfonyloxy derivative that was useful in the Michaelis–Arbuzov reaction with triethyl phosphite and ethyl diphenylphosphinite to afford tetraethyl ethylidenebisphosphonate and diethyl α-(diphenylphosphinoyl)-ethylphosphonate, respectively. The α-hydroxyphosphonates and α-hydroxyphosphine oxides prepared were subjected to bioactivity studies, and the compounds tested exhibited limited cytotoxic effects on U266 cells with modest reductions in viability at a concentration of 100 μM. Full article

Background: Methylenebisphosphonic derivatives including hydroxy-methylenebisphosphonic species may be of potential biological activity, and a part of them is used in the treatment of bone diseases. Methods: Methylenebisphosphonates may be obtained by the Michaelis–Arbuzov reaction of suitably α-substituted methylphosphonates and trialkyl phosphites or phosphinous esters, while the hydroxy-methylene variations are prepared by the Pudovik reaction of α-oxophosphonates and different >P(O)H reagents, such as diethyl phosphite and diarylphosphine oxides. Results: After converting α-hydroxy-benzylphosphonates and -phosphine oxides to the α-halogeno- and α-sulfonyloxy derivatives, they were utilized in the Michaelis–Arbuzov reaction with trialkyl phosphites and ethyl diphenylphosphinite to afford the corresponding bisphosphonate, bis(phosphine oxide) and phosphonate–phosphine oxide derivatives. The Pudovik approach led to α-hydroxy-methylenebisphosphonic species and to their rearranged products. A part of the derivatives revealed a significant cytotoxic effect on pancreatic adenocarcinoma or multiple myeloma cells. Conclusions: The new families of compounds synthesized by our novel approaches may be of practical importance due to the significant cytotoxic activity on the cell cultures investigated. Compounds lacking hydroxy groups showed anti-myeloma activity or limited effect on pancreatic cancer (PANC-1) cells unless substituted with para-trifluoromethyl group. Hydroxy-containing bisphosphonates and their rearranged derivatives demonstrated varying effects depending on structural modifications. While myeloma (U266) cells indicated greater sensitivity overall, the most significant reductions in cell viability were observed in PANC-1 cancer cells, raising potential therapeutic applications of bisphosphonates beyond myeloma-associated bone disease, particularly for malignancies like pancreatic ductal adenocarcinoma. Full article

Fosmidomycin (FOS) is a naturally occurring compound active against the 1-deoxy-D-xylulose 5-phosphate reductoisomerase (DXR) enzyme in the 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway, and using it as a template for lead structure design is an effective strategy to develop new active compounds. In this work, by replacing the hydroxamate unit of FOS with pyrazole, isoxazole and the related heterocycles that also have metal ion binding affinity, while retaining the monophosphonic acid in FOS or replacing it with a bisphosphonic acid group, heterocycle-containing mono- and bisphosphonic acid compounds as FOS analogs were designed. The key steps involved in the facile synthesis of these FOS analogs included the Michael addition of diethyl vinylphosphonate or tetraethyl vinylidenebisphosphonate to β-dicarbonyl compounds and the subsequent cyclic condensation with hydrazine or hydroxylamine. Two additional isoxazolinone-bearing FOS analogs were synthesized via the Michaelis–Becker reaction with diethyl phosphite as a key step. The bioactivity evaluation on model plants demonstrated that several compounds have better herbicidal activities compared to FOS, with the most active compound showing a 3.7-fold inhibitory activity on Arabidopsis thaliana, while on the roots and stalks of Brassica napus L. and Echinochloa crus-galli in a pre-emergence inhibitory activity test, the activities of this compound were found to be 3.2- and 14.3-fold and 5.4- and 9.4-fold, respectively, and in a post-emergency activity test on Amaranthus retroflexus and Echinochloa crus-galli, 2.2- and 2.0-fold inhibition activities were displayed. Despite the significant herbicidal activity, this compound exhibited a DXR inhibitory activity lower than that of FOS but comparable to that of other non-hydroxamate DXR inhibitors, and the dimethylallyl pyrophosphate rescue assay gave no statistical significance, suggesting that a different target might be involved in the inhibiting process. This work demonstrates that using bioisosteric replacement can be considered as a valuable strategy to discover new FOS analogs that may have high herbicidal activities. Full article

This article focuses on the synthesis of polyhydroxyurethane (PHU) materials containing novel phosphorus flame retardants (FR). Four different phosphorus compounds were grafted onto cyclic carbonate: 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO), diethyl phosphite (DEP), diphenyl phosphite (DPP) and dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (BPPO). Thus, three novel phosphorus reactive cyclic carbonates which have never been reported so far were synthetized. Phosphorus FR containing PHU materials were characterized by FTIR to evidence the total conversion of the cyclic carbonate. Moreover, the gel contents up to 80% confirmed the formation of the polymer network. Then, the thermal stability and the flame-retardant properties were investigated by thermogravimetric analyses, cone calorimeter and pyrolysis combustion flow calorimeter. The mode of action of phosphorus compounds, depending on the oxidation state, was especially highlighted. Phosphonate (+III) provided better action in a condensed phase than phosphinate thanks to a more efficient char formation. Among phosphonates, differences were observed in terms of char-formation rate and expansion. DEP provided the best flame-retardant properties, with a reduction of 76% of pHRR with 2 wt% of phosphorus in cone calorimeter analysis. Therefore, this article highlighted the different modes of action of phosphorus flame retardants, depending on the oxidation state of phosphorus, in PHU materials. Full article

A literature survey of the P–C coupling reactions of 1,4-and 1,2-bromo-iodobenzenes with diphenylphosphine oxide or diethyl phosphite under different conditions comprising Pd-, Ni-, or Cu-catalysis revealed that, depending on the experimental details, the yields of the corresponding >P(O)-bromobenzenes were rather diverse and occasionally contradicting. Therefore, the reactivity of a series of 1,4-, 1,3- and 1,2-dibromo- and bromo-iodobenzenes with the above mentioned P-reagents was evaluated under the “P-ligand-free” microwave (MW)-assisted conditions elaborated by us. Starting from dibromobenzenes and iodo-bromoarenes, practical and competent syntheses were developed for phosphonoyl- and phosphinoyl-bromoarenes, and, in a few instances, for arenes with two P-functions. The cheaper dibromobenzenes may be substituted for the bromo-iodo derivatives. In all, 12 products were prepared in yields of 45–82%. They were fully characterized. The method described does not require the use of traditional P-ligands. Full article

The chemical reactivity of 3-[(E)-3-(dimethylamino)-2-propenoyl]-4-hydroxy-1-methy-2(1H)-quinolinone (1) towards some phosphorus reagents was studied. The enaminone 1 was cyclized into pyranoquinolinylphosphonate 2 via treatment with diethyl phosphite in basic medium. However, its reaction with triethoxy phosphonoacetate gave the substituted oxopyranylphosphonate 3. Using the same reaction conditions, both thioxopyridinylphosphonate 4 and oxopyranylphosphonate 5 were produced via a reaction of enaminone 1 with both diethyl 2-amino-2-thioxoethylphosphonate and diethyl vinylphosphonate, respectively, in low yields. In addition, the two novel oxopyridinylphosphonates 6 and 7 were obtained by treatment of enaminone 1 with a diethyl cyanomethylphosphonate reagent. Two oaxathiaphosphininyl derivatives, 8 and 9, were obtained by treatment of the enaminone 1 with O, O-diethyl dithiophosphoric acid under different reaction conditions. Diazaphosphininyl 11 and oxazaphosphininyl 12 derivatives were obtained in excellent yields using a P-phenylphosphonic diamide reagent under different reaction conditions. The treatment of the enaminone 1 with phosphorus pentasulfide produced the non-phosphorylated product thioxothiopyranoquinolinone 13. Finally, the enaminone was turned into oxathiaphosphininyl 14 using Lawesson’s reagent. The possible reaction mechanisms of the formation of these products were discussed. The structures of newly isolated products were established by elemental analysis and spectral tools. The compounds were evaluated for their antioxidant activities. Full article

The extraction of metals from waste printed circuit boards (WPCBs) with ionic liquids (ILs), Deep Eutectic Solvents (DESs) and organophosphorous-based acid (Cyanex 272) has been presented. The study was undertaken to assess the effectiveness of the application of the new leaching liquids, and the new method of extraction of metals from the leachate and the solid phase with or without the leaching process. Solvent extraction from the liquid leachate phase has been studied in detail with popular ILs, such as tetraoctylphosphonium bromide, {[P_8,8,8,8][Br] and tributyltetradecylphosphonium chloride, [P_4,4,4,14][Cl] using Aqueous Biphasic Systems (ABS) method. Trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl) phosphinate, [P_6,6,6,14][Cyanex272], ([P_6,6,6,14][BTMPP]), trihexyltetradecylphosphonium thiocyanate, [P_6,6,6,14][SCN], methyltrioctylammonium chloride (Aliquat 336), as well as bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex 272) were also used in the extraction of metals from the leachate. Two DESs (1) {choline chloride + lactic acid, 1:2} and (2) {choline chloride + malonic acid, 1:1} were used in the extraction of metals from the solid phase. The extraction behavior of metals with DESs was compared with that performed with three new bi-functional ILs: didecyldimethylammonium salicylate, [N_10,10,1,1][Sal], didecyldimethylammonium bis(2-ethylhexyl) phosphate, [N_10,10,1,1][D2EHPA], and didecyldimethylammonium bis(2,4,4-trimethylpentyl) phosphinate, [N_10,10,1,1][Cyanex272]. The [P_6,6,6,14][Cyanex272]/toluene and (Cyanex 272 + diethyl phosphite ester) mixtures exhibited a high extraction efficiency of about 50–90% for different metal ions from the leachate. High extraction efficiency of about 90–100 wt% with the ABS method using the mixture {[P_8,8,8,8][Br], or [P_4,4,4,14][Cl] + NaCl + H₂O₂ + post-leaching liquid phase} was obtained. The DES 2 revealed the efficiency of copper extraction, E_Cu = 15.8 wt% and silver, E_Ag = 20.1 wt% at pH = 5 from the solid phase after the thermal pre-treatment and acid leaching. The solid phase extraction efficiency after thermal pre-treatment only was (E_Cu = 9.6 wt% and E_Ag = 14.2 wt%). The use of new bi-functional ILs did not improve the efficiency of the extraction of metal ions from the solid phase. Process factors such as solvent concentration, extraction additives, stripping and leaching methods, temperature, pH and liquid/solid as well as organic/water ratios were under control. For all the systems, the selectivity and distribution ratios were described. The proposed extraction processes can represent alternative paths in new technologies for recovering metals from electronic secondary waste. Full article

All the enantiomers of (1-amino-3-hydroxypropane-1,3-diyl)diphosphonic acid, newly design phosphonate analogues of 4-hydroxyglutamic acids, were obtained. The synthetic strategy involved Abramov reactions of diethyl (R)- and (S)-1-(N-Boc-amino)-3-oxopropylphosphonates with diethyl phosphite, separation of diastereoisomeric [1-(N-Boc-amino)-3-hydroxypropane-1,3-diyl]diphosphonates as O-protected esters, followed by their hydrolysis to the enantiomeric phosphonic acids. The absolute configuration of the enantiomeric phosphonates was established by comparing the ³¹P NMR chemical shifts of respective (S)-O-methylmandelic acid esters obtained from respective pairs of syn- and anti-[1-(N-Boc-amino)-3-hydroxypropane-1,3-diyl]diphosphonates according to the Spilling rule. Full article