Search Results (34)

The Planet SuperDove sensors produce eight-band, three-meter resolution images covering the blue, green, red, red-edge, and NIR spectral bands. Variations in spectral response in the data used to perform atmospheric correction combined with low signal-to-noise over ocean waters can lead to visible striping artifacts in the downstream ocean-color products. It was determined that the striping artifacts could be removed from these products by filtering the top of the atmosphere radiance in the red and NIR bands prior to selecting the aerosol models, without sacrificing high-resolution features in the imagery. This paper examines an approach that applies this filtering to the respective bands as a preprocessing step. The outcome and performance of this filtering technique are examined to assess the success of removing the striping effect in atmospherically corrected Planet SuperDove data. Full article

Uncrewed-Aerial Vehicles (UAVs) and hyperspectral sensors are emerging as effective alternatives for monitoring water quality on-demand. However, image mosaicking for largely featureless coastal water surfaces or open seas has shown to be challenging. Another pertinent issue observed is the systematic image misalignment between adjacent flight lines due to the time delay between the UAV-borne sensor and the GNSS system. To overcome these challenges, this study introduces a workflow that entails a GPS-based image mosaicking method for push-broom hyperspectral images, together with a correction method to address the aforementioned systematic image misalignment. An open-source toolkit, CoastalWQL, was developed to facilitate the workflow, which includes essential pre-processing procedures for improving the image mosaic’s quality, such as radiometric correction, de-striping, sun glint correction, and object masking classification. For validation, UAV-based push-broom hyperspectral imaging surveys were conducted to monitor coastal turbidity in Singapore, and the implementation of CoastalWQL’s pre-processing workflow was evaluated at each step via turbidity retrieval. Overall, the results confirm that the image mosaicking of the push-broom hyperspectral imagery over featureless water surface using CoastalWQL with time delay correction enabled better localisation of the turbidity plume. Radiometric correction and de-striping were also found to be the most important pre-processing procedures, which improved turbidity prediction by 46.5%. Full article

When a remote sensing camera work in push-broom mode, the obtained image usually contains significant stripe noise and random noise due to differences in detector response and environmental factors. Traditional approaches typically treat them as two independent problems and process the image sequentially, which not only increases the risk of information loss and structural damage, but also faces the situation of noise mutual influence. To overcome the drawbacks of traditional methods, this paper leverages the double low-rank characteristics in the underlying prior of degraded images and presents a novel approach for addressing both destriping and denoising tasks simultaneously. We utilize the commonality that both can be treated as inverse problems and place them in the same optimization framework, while designing an alternating direction method of multipliers (ADMM) strategy for solving them, achieving the synchronous removal of both stripe noise and random noise. Compared with traditional approaches, synchronous denoising technology can more accurately evaluate the distribution characteristics of noise, better utilize the original information of the image, and achieve better destriping and denoising results. To assess the efficacy of the proposed algorithm, extensive simulations and experiments were conducted in this paper. The results show that compared with state-of-the-art algorithms, the proposed method can more effectively suppress random noise, achieve better synchronous denoising results, and it exhibits a stronger robustness. Full article

Satellite sensors often capture remote sensing images that contain various types of stripe noise. The presence of these stripes significantly reduces the quality of the remote images and severely affects their subsequent applications in other fields. Despite the existence of many stripe noise removal methods in the research, they often result in the loss of fine details during the destriping process, and some methods even generate artifacts. In this paper, we proposed a new unidirectional variational model to remove horizontal stripe noise. The proposed model fully considered the directional characteristics and structural sparsity of the stripe noise, as well as the prior features of the underlying image, to design different sparse constraints, and the ${\mathsf{\ell }}_p$ quasinorm was introduced in these constraints to better describe these sparse characteristics, thus achieving a more excellent destriping effect. Moreover, we employed the fast alternating direction method of multipliers (ADMM) to solve the proposed non-convex model. This significantly improved the efficiency and robustness of the proposed method. The qualitative and quantitative results from simulated and real data experiments confirm that our method outperforms existing destriping approaches in terms of stripe noise removal and preservation of image details. Full article

The Tibetan Plateau (TP) has the largest number of high-altitude glaciers on Earth. As a source of major rivers in Asia, this region provides fresh water to more than one billion people. Any terrestrial water storage (TWS) changes there have major societal effects in large parts of the continent. Due to the recent acceleration in global warming, part of the water environment in TP has become drastically unbalanced, with an increased risk of water disasters. We quantified secular and monthly glacier-mass-balance and TWS changes in water basins from April 2002 to December 2021 through the Gravity Recovery and Climate Experiment and its Follow-on satellite mission (GRACE/GRACE-FO). Adequate data postprocessing with destriping filters and gap filling and two regularization methods implemented in the spectral and space domain were applied. The largest glacier-mass losses were found in the Nyainqentanglha Mountains and Eastern Himalayas, with rates of −4.92 ± 1.38 Gt a⁻¹ and −4.34 ± 1.48 Gt a⁻¹, respectively. The Tien Shan region showed strong losses in its eastern and central parts. Furthermore, we found small glacier-mass increases in the Karakoram and West Kunlun. Most of the glacier mass change can be explained by snowfall changes and, in some areas, by summer rainfall created by the Indian monsoon. Major water basins in the north and south of the TP exhibited partly significant negative TWS changes. In turn, the endorheic region and the Qaidam basin in the TP, as well as the near Three Rivers source region, showed distinctly positive TWS signals related to net precipitation increase. However, the Salween River source region and the Yarlung Zangbo River basin showed decreasing trends. We suggest that our new and improved TWS-change results can be used for the maintenance of water resources and the prevention of water disasters not only in the TP, but also in surrounding Asian countries. They may also help in global change studies. Full article

Remote sensing nighttime lights (NTLs) offers a unique perspective on human activity, and NTL images are widely used in urbanization monitoring, light pollution, and other human-related research. As one of the payloads of sustainable development science Satellite-1 (SDGSAT-1), the Glimmer Imager (GI) provides a new multi-spectral, high-resolution, global coverage of NTL images. However, during the on-orbit testing of SDGSAT-1, a large number of stripes with bad or corrupted pixels were observed in the L1A GI image, which directly affected the accuracy and availability of data applications. Therefore, we propose a novel destriping algorithm based on anomaly detection and spectral similarity restoration (ADSSR) for the GI image. The ADSSR algorithm mainly consists of three parts: pretreatment, stripe detection, and stripe restoration. In the pretreatment, salt-pepper noise is suppressed by setting a minimum area threshold of the connected components. Then, during stripe detections, the valid pixel number sequence and the total pixel value sequence are analyzed to determine the location of stripes, and the abnormal pixels of each stripe are estimated by a clustering algorithm. Finally, a spectral-similarity-based method is adopted to restore all abnormal pixels of each stripe in the stripe restoration. In this paper, the ADSSR algorithm is compared with three representative destriping algorithms, and the robustness of the ADSSR algorithm is tested on different sizes of GI images. The results show that the ADSSR algorithm performs better than three representative destriping algorithms in terms of visual and quantitative indexes and still maintains outstanding performance and robustness in differently sized GI images. Full article

The existing nonuniformity correction methods generally have the defects of image blur, artifacts, image over-smoothing, and nonuniform residuals. It is difficult for these methods to meet the requirements of image enhancement in various complex application scenarios. In particular, when these methods are applied to dim small target images, they may remove dim small targets as noise points due to the image over-smoothing. This paper draws on the idea of a residual network and proposes a two-stage learning network based on the imaging mechanism of an infrared line-scan system. We adopt a multi-scale feature extraction unit and design a gain correction sub-network and an offset correction sub-network, respectively. Then, we pre-train the two sub-networks independently. Finally, we cascade the two sub-networks into a two-stage network and train it. The experimental results show that the PSNR gain of our method can reach more than 15 dB, and it can achieve excellent performance in different backgrounds and different intensities of nonuniform noise. Moreover, our method can avoid losing texture details or dim small targets after effectively removing nonuniform noise. Full article

The stripe noise in the multispectral remote sensing images, possibly resulting from the instrument instability, slit contamination, and light interference, significantly degrades the imaging quality and impairs high-level visual tasks. The local consistency of homogeneous region in striped images is damaged because of the different gains and offsets of adjacent sensors regarding the same ground object, which leads to the structural characteristics of stripe noise. This can be characterized by the increased differences between columns in the remote sensing image. Therefore, the destriping can be viewed as a process of improving the local consistency of homogeneous region and the global uniformity of whole image. In recent years, convolutional neural network (CNN)-based models have been introduced to destriping tasks, and have achieved advanced results, relying on their powerful representation ability. Therefore, to effectively leverage both CNNs and the structural characteristics of stripe noise, we propose a multi-scaled column-spatial correction network (CSCNet) for remote sensing image destriping, in which the local structural characteristic of stripe noise and the global contextual information of the image are both explored at multiple feature scales. More specifically, the column-based correction module (CCM) and spatial-based correction module (SCM) were designed to improve the local consistency and global uniformity from the perspectives of column correction and full image correction, respectively. Moreover, a feature fusion module based on the channel attention mechanism was created to obtain discriminative features derived from different modules and scales. We compared the proposed model against both traditional and deep learning methods on simulated and real remote sensing images. The promising results indicate that CSCNet effectively removes image stripes and outperforms state-of-the-art methods in terms of qualitative and quantitative assessments. Full article

Sea ice monitoring plays a vital role in secure navigation and offshore activities. Synthetic aperture radar (SAR) has been widely used as an effective tool for sea ice remote sensing (e.g., ice type classification, concentration and thickness retrieval) for decades because it can collect data by day and night and in almost all weather conditions. The RADARSAT Constellation Mission (RCM) is a new Canadian SAR mission providing several new services and data, with higher spatial coverage and temporal resolution than previous Radarsat missions. As a very deep convolutional neural network, Normalizer-Free ResNet (NFNet) was proposed by DeepMind in early 2021 and achieved a new state-of-the-art accuracy on the ImageNet dataset. In this paper, the RCM data are utilized for sea ice detection and classification using NFNet for the first time. HH, HV and the cross-polarization ratio are extracted from the dual-polarized RCM data with a medium resolution (50 m) for an NFNet-F0 model. Experimental results from Eastern Arctic show that destriping in the HV channel is necessary to improve the quality of sea ice classification. A two-level random forest (RF) classification model is also applied as a conventional technique for comparisons with NFNet. The sea ice concentration estimated based on the classification result from each region was validated with the corresponding polygon of the Canadian weekly regional ice chart. The overall classification accuracy confirms the superior capacity of the NFNet model over the RF model for sea ice monitoring and the sea ice sensing capacity of RCM. Full article

Time series of the Gravity Recovery and Climate Experiment (GRACE) satellite mission have been successfully used to reveal changes in terrestrial water storage (TWS) in many parts of the world. This has been hindered in the interior of the Tibetan Plateau since the derived TWS changes there are very sensitive to the selections of different available GRACE solutions, and filters to remove north-south-oriented (N-S) stripe features in the observations. This has resulted in controversial distributions of the TWS changes in previous studies. In this paper, we produce aggregated hydrology signals (AHS) of TWS changes from 2003 to 2009 in the Tibetan Plateau and test a large set of GRACE solution-filter combinations and mascon models to identify the best combination or mascon model whose filtered results match our AHS. We find that the application of a destriping filter is indispensable to remove correlated errors shown as N-S stripes. Three best-performing destriping filters are identified and, combined with two best-performing solutions, they represent the most reliable solution-filter combinations for determination of weak terrestrial water storage changes in the interior of the Tibetan Plateau from GRACE. In turn, more than 100 other tested solution-filter combinations and mascon solutions lead to very different distributions of the TWS changes inside and outside the plateau that partly disagree largely with the AHS. This is mainly attributed to less effective suppression of N-S stripe noises. Our results also show that the most effective destriping is performed within a maximum degree and order of 60 for GRACE spherical harmonic solutions. The results inside the plateau show one single anomaly in the TWS trend when additional smoothing with a 340-km-radius Gaussian filter is applied. We suggest using our identified best solution-filter combinations for the determination of TWS changes in the Tibetan Plateau and adjacent areas during the whole GRACE operation time span from 2002 to 2017 as well as the succeeding GRACE-FO mission. Full article

In hyperspectral imaging (HSI), stripe noise is one of the most common noise types that adversely affects its application. Convolutional neural networks (CNNs) have contributed to state-of-the-art performance in HSI destriping given their powerful feature extraction and learning capabilities. However, it is difficult to obtain paired training samples for real data. Most CNN destriping methods construct a paired training dataset with simulated stripe noise for network training. However, when the stripe noise of real data is complex, destriping performance of the model is constrained. To solve this problem, this study proposes a real HSI stripe removal method using a toward real HSI stripe removal via direction constraint hierarchical feature cascade network (TRS-DCHC). TRS-DCHC uses the stripe noise extract subnetwork to extract stripe patterns from real stripe-containing HSI data and incorporates clean images to form paired training samples. The destriping subnetwork advantageously utilizes a wavelet transform to explicitly decompose stripe and stripe-free components. It also adopts multi-scale feature dense connections and feature fusion to enrich feature information and deeply mine the discriminate features of stripe and stripe-free components. Our experiments on both simulated and real data of various loads showed that TRS-DCHC features better performance in both simulated and real data compared with state-of-the-art method. Full article

Despite being recognized as a key component of shallow-water ecosystems, submerged aquatic vegetation (SAV) remains difficult to monitor over large spatial scales. Because of SAV’s structuring capabilities, high-resolution monitoring of submerged landscapes could generate highly valuable ecological data. Until now, high-resolution remote sensing of SAV has been largely limited to applications within costly image analysis software. In this paper, we propose an example of an adaptable open-sourced object-based image analysis (OBIA) workflow to generate SAV cover maps in complex aquatic environments. Using the R software, QGIS and Orfeo Toolbox, we apply radiometric calibration, atmospheric correction, a de-striping correction, and a hierarchical iterative OBIA random forest classification to generate SAV cover maps based on raw DigitalGlobe multispectral imagery. The workflow is applied to images taken over two spatially complex fluvial lakes in Quebec, Canada, using Quickbird-02 and Worldview-03 satellites. Classification performance based on training sets reveals conservative SAV cover estimates with less than 10% error across all classes except for lower SAV growth forms in the most turbid waters. In light of these results, we conclude that it is possible to monitor SAV distribution using high-resolution remote sensing within an open-sourced environment with a flexible and functional workflow. Full article

Stripe noise is a common condition that has a considerable impact on the quality of the images. Therefore, stripe noise removal (destriping) is a tremendously important step in image processing. Since the existing destriping models cause different degrees of ripple effects, in this paper a new model, based on total variation (TV) regularization, global low rank and directional sparsity constraints, is proposed for the removal of vertical stripes. TV regularization is used to preserve details, and the global low rank and directional sparsity are used to constrain stripe noise. The directional and structural characteristics of stripe noise are fully utilized to achieve a better removal effect. Moreover, we designed an alternating minimization scheme to obtain the optimal solution. Simulation and actual experimental data show that the proposed model has strong robustness and is superior to existing competitive destriping models, both subjectively and objectively. Full article

Hyperspectral image (HSI) is easily corrupted by different kinds of noise, such as stripes, dead pixels, impulse noise, Gaussian noise, etc. Due to less consideration of the structural specificity of stripes, many existing HSI denoising methods cannot effectively remove the heavy stripes in mixed noise. In this paper, we classify the noise on HSI into three types: sparse noise, stripe noise, and Gaussian noise. The clean image and different types of noise are treated as independent components. In this way, the image denoising task can be naturally regarded as an image decomposition problem. Thanks to the structural characteristic of stripes and the low-rank property of HSI, we propose to destripe and denoise the HSI by using stripe and spectral low-rank matrix recovery and combine it with the global spatial-spectral TV regularization (SSLR-SSTV). By considering different properties of different HSI ingredients, the proposed method separates the original image from the noise components perfectly. Both simulation and real image denoising experiments demonstrate that the proposed method can achieve a satisfactory denoising result compared with the state-of-the-art methods. Especially, it outperforms the other methods in the task of stripe noise removal visually and quantitatively. Full article

Stripe noise is a common and unwelcome noise pattern in various thermal infrared (TIR) image data including conventional TIR images and remote sensing TIR spectral images. Most existing stripe noise removal (destriping) methods are often difficult to keep a good and robust efficacy in dealing with the real-life complex noise cases. In this paper, based on the intrinsic spectral properties of TIR images and stripe noise, we propose a novel two-stage transform domain destriping method called Fourier domain anomaly detection and spectral fusion (ADSF). Considering the principal frequencies polluted by stripe noise as outliers in the statistical spectrum of TIR images, our naive idea is first to detect the potential anomalies and then correct them effectively in the Fourier domain to reconstruct a desired destriping result. More specifically, anomaly detection for stripe frequencies is achieved through a regional comparison between the original spectrum and the expected spectrum that statistically follows a generalized Laplacian regression model, and then an anomaly weight map is generated accordingly. In the correction stage, we propose a guidance-image-based spectrum fusion strategy, which integrates the original spectrum and the spectrum of a guidance image via the anomaly weight map. The final reconstruction result not only has no stripe noise but also maintains image structures and details well. Extensive real experiments are performed on conventional TIR images and remote sensing spectral images, respectively. The qualitative and quantitative assessment results demonstrate the superior effectiveness and strong robustness of the proposed method. Full article