Search Results (88)

According to the United Nations Environment Programme reports, buildings are responsible for nearly 40% of energy-related emissions; therefore, energy-optimized building design is crucial to reduce the reliance on non-renewable energy sources as well as greenhouse gas emissions. The OECD reports indicate the use of Building Information Modelling (BIM) as one of the effective strategies for decarbonization of buildings, since a 3D digital representation of both physical and functional characteristics of a building can help to design a more efficient infrastructure. An efficient integration of solar energy in building design can be vital for the enhancement of energy performance in terms of heating, cooling, and lighting demand. This paper presents results of an analysis of how factors related to the use of daylight, such as automatic control of artificial lighting, external shading, or the visual absorptance of internal surfaces, influence the energy efficiency within an example room in two different climatic zones. The simulation was conducted using Design Builder software, with predefined occupancy schedules and internal heat gains, and standard EPW weather files for Warsaw and Genua climate zones. The study indicates that for the examined room, when no automatic sunshades or a lighting control system is utilized, most of the final energy demand is for cooling purposes (45–54%), followed by lighting (42–43%), with only 3–12% for heating purposes. The introduction of sunshades and/or the use of daylight allowed for a reduction of the total demand by up to half. Moreover, it was pointed out that often neglected factors, like the colour of the internal surfaces, can have a significant effect on the final energy consumption. In variants with light interior, the total energy consumption was lower by about 3–4% of the baseline demand, compared to their corresponding ones with dark surfaces. These results are consistent with previous studies on daylighting strategies and highlight the importance of considering both visual and thermal impacts when evaluating energy performance. Similarly, possible side effects of certain actions were highlighted, such as an increase in heat demand resulting from a reduced need for artificial lighting. The results of the analysis highlight the potential of a simulation-based design approach in optimizing daylight use, contributing to the broader goals of building decarbonization. Full article

Under the dual challenges of global energy crisis and climate change, the building sector, as a major carbon emitter consuming 33% of global primary energy, has seen its energy efficiency optimization become a critical pathway towards achieving carbon neutrality goals. The Window-to-Wall Ratio (WWR), serving as a core parameter in building envelope design, directly influences building energy consumption, with its optimized design playing a decisive role in balancing natural daylighting, ventilation efficiency, and thermal comfort. This study focuses on the traditional One-Seal dwellings (Yikeyin) in Kunming, China, establishing a dynamic wind field-thermal environment coupled analysis framework to investigate the impact mechanism of window dimensions (WWR and aspect ratio) on indoor thermal comfort under natural wind conditions in transitional climate zones. Utilizing the Grasshopper platform integrated with Ladybug, Honeybee, and Butterfly plugins, we developed parametric models incorporating Kunming’s Energy Plus Weather meteorological data. EnergyPlus and OpenFOAM were employed, respectively, for building heat-moisture balance calculations and Computational Fluid Dynamic (CFD) simulations, with particular emphasis on analyzing the effects of varying WWR (0.05–0.20) on temperature-humidity, air velocity, and ventilation efficiency during typical winter and summer weeks. Key findings include, (1) in summer, the baseline scenario with WWR = 0.1 achieves a dynamic thermal-humidity balance (20.89–24.27 °C, 65.35–74.22%) through a “air-permeable but non-ventilative” strategy, though wing rooms show humidity-heat accumulation risks; increasing WWR to 0.15–0.2 enhances ventilation efficiency (2–3 times higher air changes) but causes a 4.5% humidity surge; (2) winter conditions with WWR ≥ 0.15 reduce wing room temperatures to 17.32 °C, approaching cold thresholds, while WWR = 0.05 mitigates heat loss but exacerbates humidity accumulation; (3) a symmetrical layout structurally constrains central ventilation, maintaining main halls air changes below one Air Change per Hour (ACH). The study proposes an optimized WWR range of 0.1–0.15 combined with asymmetric window opening strategies, providing quantitative guidance for validating the scientific value of vernacular architectural wisdom in low-energy design. Full article

This research proposes an integrated lighting and solar shading strategy to improve energy efficiency and user comfort in a retrofit project in a temperate-humid climate. The study examines a future library addition to an existing faculty building in Bursa, featuring highly glazed façades (77% southwest, 81% northeast window-to-wall ratio), an open-plan layout, and situated within an unobstructed low-rise campus environment. Trade-offs between daylight availability, heating, cooling, lighting energy use, and visual and thermal comfort are evaluated through integrated lighting (DIALux Evo), climate-based daylight (CBDM), and energy simulations (DesignBuilder, EnergyPlus, Radiance). Fifteen solar shading configurations—including brise soleil, overhangs, side fins, egg crates, and louvres—are evaluated alongside a daylight-responsive LED lighting system that meets BS EN 12464-1:2021. Compared to the reference case’s unshaded glazing, optimal design significantly improves building performance: a brise soleil with 0.4 m slats at 30° reduces annual primary energy use by 28.3% and operational carbon emissions by 29.1% and maintains thermal comfort per ASHRAE 55:2023 Category II (±0.7 PMV; PPD < 15%). Daylight performance achieves 91.5% UDI and 2.1% aSE, with integrated photovoltaics offsetting 129.7 kWh/m² of grid energy. This integrated strategy elevates the building’s energy class under national benchmarks while addressing glare and overheating in the original design. Full article

Traditional approaches in tunnel lighting have been directed toward the installation of appropriate luminaires in the intermediate and transitional sections with the simple objective of diminishing the effect of delayed visual accommodation during daylight hours. Such efforts run in parallel with the target of keeping the huge electrical use at the lowest level. Nevertheless, inadequate attention has been conceded to the interior areas, whose noticeable longitude in several instances, and subsequently the duration of occupancy of the users, can produce discomfort in the majority of the tunnel or underground passageway. It is in this region where the flicker effect presents a more remarkable impact. Although such effect is in fact uncomfortable, the strategies to eliminate it efficiently have not been developed in depth and the result is still deserving, especially in terms of sustainability. The reasons for this neglect, as well as some particularities and solutions, are exposed and discussed in the present article. Specifically, it is proved that the use of sunlight can be an adequate initiative and a positive energy input into design and retrofit tunnels capable of hampering or totally avoiding such unwanted effect. The innovative tunnel geometry explained in this manuscript is not cylindrical, and it is not based in revolution forms. Thus, it prevents the appearance of such unnerving visual effects, which compromise sustainability and endanger security. We are in the position to explain how the vector field generated by the normal to the points of the novel surface displayed remains non-parallel, ensuring appropriate diffusivity and, consequently, an even distribution of radiated energy. In the same manner, the notion of the tunnel is extended from a linear system to a veritable network of galleries, which can traverse in space bi- or even three-dimensionally. Accordingly, we will offer diverse instances of junctions and splices that further enhance the permeability into the terrain, augmenting the resilience capabilities of this disruptive technology. With all the former, a net reduction of costs reaching 25% can be easily expected with revenues. Full article

This review investigates the role of building windows in supporting occupant well-being through access to natural views and daylight. This review synthesizes recent interdisciplinary research from environmental psychology, building science, and human physiology to examine how windows impact cognitive performance, psychological restoration, and circadian health. Drawing on 304 peer-reviewed studies from 2000 to 2024, the review identifies two core pathways: visual effects—related to daylight availability, glare control, and view quality—and non-visual effects—linked to circadian entrainment and neuroendocrine regulation via ipRGCs. These effects interact yet compete, necessitating a multi-objective optimization approach. This paper evaluates commonly used metrics for visual comfort, circadian-effective lighting, and view quality and discusses their integration in design frameworks. The review also highlights the potential of adaptive facade technologies and artificial window systems to balance human-centered lighting goals with energy efficiency. A research roadmap is proposed to support future integrative design strategies that optimize both visual and non-visual outcomes in diverse architectural contexts. Full article

Biophilic design has emerged as a multidimensional response to growing concerns about health, well-being, and ecological balance in the built environment. Despite its rising prominence, research on the topic remains fragmented across building typologies, user groups, and geographic contexts. This study presents a comprehensive review of the biophilic design literature, employing a hybrid methodology combining structured content analysis and bibliometric mapping. All peer-reviewed studies indexed in the Web of Science and Scopus were manually screened for architectural relevance and systematically coded. A total of 435 studies were analysed to identify key trends, thematic patterns, and research gaps in the biophilic design discipline. This review categorises the literature by methodological strategies, building typologies, spatial scales, population groups, and specific biophilic design parameters. It also examines geographic and cultural dimensions, including climate responsiveness, heritage buildings, policy frameworks, theory development, pedagogy, and COVID-19-related research. The findings show a strong emphasis on institutional contexts, particularly workplaces, schools, and healthcare, and a reliance on perception-based methods such as surveys and experiments. In contrast, advanced tools like artificial intelligence, simulation, and VR are notably underused. Few studies engage with neuroarchitecture or neuroscience-informed approaches, despite growing recognition of how spatial design can influence cognitive and emotional responses. Experimental and biometric methods remain scarce among the few relevant contributions, revealing a missed opportunity to connect biophilic strategies with empirical evidence. Regarding biophilic parameters, greenery, daylight, and sensory experience are the most studied parameters, while psychological parameters remain underexplored. Cultural and climate-specific considerations appear in relatively few studies, and many fail to define a user group or building typology. This review highlights the need for more inclusive, context-responsive, and methodologically diverse research. By bridging macro-scale bibliometric patterns with fine-grained thematic insights, this study provides a replicable review model and valuable reference for advancing biophilic design as an evidence-based, adaptable, and human-centred approach to sustainable architecture. Full article

The timeshare is gradually becoming an essential global tourism operation model, especially in rural areas of China, where the leisure industry is developing rapidly. Meanwhile, the environmental issues of the rapidly growing timeshare-related building production have received widespread attention. The existing research on zero-carbon buildings considers carbon emissions as a constant value and cannot adapt to the impact of user changes during the operation phase. Constructing a low-carbon design applicable to timeshare is significant for controlling carbon emissions in the construction industry and responding to the environmental crisis. The practical carbon emissions of touristic apartments depend on the requirement changes in different customer clusters. The timeshare theory reflects the requirement change in different customer clusters based on the timeshare property ownership change. This paper focuses on a dynamic design strategy for zero-carbon building openings to reduce practical carbon emissions. Firstly, this research clarifies the primary customer clusters and conducts a touristic apartment unit model by timeshare property ownership. Then, this research clarifies the changes in customer requirements to analyze the spatial function changes in the operating phase. Finally, the study identifies six dynamic carbon emission indicators, such as the window-to-wall ratio, ventilation rate, and effective daylight area, and through passive design methods, provides 13 variable devices applied in the operating phase to control dynamic carbon emission indicators by customers. This paper also offers a flexible method to effectively decrease and accurately control carbon emissions by reducing the possible device utility. Full article

With the rapid advancement of urbanization in China, the demand for community-based elderly care facilities (CECFs) has been increasing. One pressing challenge is the question of how to provide CECFs that not only meet the health needs of the elderly but also make efficient use of limited urban land resources. This study addresses this issue by adopting an integrated multi-method research framework that combines multi-objective optimization (MOO) algorithms, Spearman rank correlation analysis, ensemble learning methods (Random Forest combined with SHapley Additive exPlanations (SHAP), where SHAP enhances the interpretability of ensemble models), and Self-Organizing Map (SOM) neural networks. This framework is employed to identify optimal building configurations and to examine how different architectural parameters influence key daylight performance indicators—Useful Daylight Illuminance (UDI) and Daylight Factor (DF). Results indicate that when UDI and DF meet the comfort thresholds for elderly users, the minimum building area can be controlled to as little as 351 m² and can achieve a balance between natural lighting and spatial efficiency. This ensures sufficient indoor daylight while mitigating excessive glare that could impair elderly vision. Significant correlations are observed between spatial form and daylight performance, with factors such as window-to-wall ratio (WWR) and wall thickness (WT) playing crucial roles. Specifically, wall thickness affects indoor daylight distribution by altering window depth and shading. Moreover, the ensemble learning models combined with SHAP analysis uncover nonlinear relationships between various architectural parameters and daylight performance. In addition, a decision support method based on SOM is proposed to replace the subjective decision-making process commonly found in traditional optimization frameworks. This method enables the visualization of a large Pareto solution set in a two-dimensional space, facilitating more informed and rational design decisions. Finally, the findings are translated into a set of practical design strategies for application in real-world projects. Full article

Against the background of the global concern for environmental protection and the prevalence of the green building concept, the requirements for building design are increasing, as are the technological content and functional requirements. Meanwhile, the urgency to address challenges related to the ecological environment and performance requirements has become increasingly pronounced. Taking a dormitory building in China as an example. Autodesk Revit 2018 software is employed in this study to establish a building information modeling (BIM). Green building software (GBSWARE) simulates and analyzes outdoor wind environment, indoor thermal comfort, calculates building energy conservation, does daylighting analysis, and calculates building daylighting. Although the building’s energy-saving design aligns with the requirements, the lighting and indoor thermal comfort of the rooms do not meet the standards. Additionally, the outdoor wind environment has problems with the wind zone and a wind speed amplification coefficient that surpasses the limit. The thermal environment within the residential building fails to satisfy the requirements. This study leverages a BIM-based model for multifaceted applications, integrating tailored retrofit strategies that align with the building’s inherent characteristics and detailed analyses of its components. By harnessing the building’s energy-saving potential, it enhances energy use efficiency, offering a valuable reference for the conceptual design of green buildings and energy-efficient retrofits. Full article

Urban thermal environments, characterized by the interplay between indoor and outdoor conditions, pose growing challenges in high-density coastal cities. This study proposes a multi-scale, integrative framework that couples a satellite-derived land surface temperature (LST) analysis with microscale building performance simulations to holistically evaluate the high-density urban thermal environment in subtropical climates. The results reveal that compact, high-density morphologies reduce outdoor heat stress (UTCI) through self-shading but lead to significantly higher cooling loads, energy use intensity (EUI), and poorer daylight autonomy (DA) due to restricted ventilation and limited sky exposure. In contrast, more open, vegetation-rich forms improve ventilation and reduce indoor energy demand, yet exhibit higher UTCI values in exposed areas and increased lighting energy use in poorly oriented spaces. This study also proposes actionable design strategies, including optimal building spacing (≥15 m), façade orientation (30–60° offset from west), SVF regulation (0.4–0.6), and the integration of vertical greenery to balance solar access, ventilation, and shading. These findings offer evidence-based guidance for embedding morphological performance metrics into planning policies and building design codes. This work advances the integration of outdoor and indoor performance evaluation and supports climate-adaptive urban form design through quantitative, policy-relevant insights. Full article

The rapid development of urban subway network is prompting higher requirements for daylighting in subway stations. The skylight daylighting space of shallow buried subway stations not only improves the quality of light environment but also brings challenges for the optimization of light and thermal performance, especially in areas with hot summers and cold winters. In this paper, key parameters such as illumination, air temperature, and the black sphere temperature of skylight and artificial lighting areas at stations A and B in Shanghai were tested with a field test system. The results show that the light environment in the skylight areas was significantly improved, but the need for regulation and control of the thermal environment increased. Combined with response surface analysis, 10 sample models for two types of daylighting space (partitioned and open atrium styles) were studied and constructed, including 254 simulated working conditions. The results reveal that design parameters such as the number, aspect ratio, depth of light openings, and skylight angle have significant effects on combined energy consumption. The decentralized double slope roof daylighting space has the best performance in partitioned and open atrium-style public areas, and combined energy consumption can be reduced to 385.14 kWh/m². The optimization strategies proposed in this study can provide a quantitative basis for the skylight design of shallow buried subway stations and an important reference for the design of low-carbon and energy-saving underground spaces. Full article

While deep learning-based image matching methods excel at extracting high-level semantic features from remote sensing data, their performance degrades significantly under cross-daylight conditions and wide-baseline geometric distortions, particularly in multi-source street-view scenarios. This paper presents a novel illumination-invariant framework that synergistically integrates geometric topology and semantic consistency to achieve robust multi-view matching for cross-daylight urban perception. We first design a self-supervised learning paradigm to extract illumination-agnostic features by jointly optimizing local descriptors and global geometric structures across multi-view images. To address extreme perspective variations, a homography-aware transformation module is introduced to stabilize feature representation under large viewpoint changes. Leveraging a graph neural network with hierarchical attention mechanisms, our method dynamically aggregates contextual information from both local keypoints and semantic topology graphs, enabling precise matching in occluded regions and repetitive-textured urban scenes. A dual-branch learning strategy further refines similarity metrics through supervised patch alignment and unsupervised spatial consistency constraints derived from Delaunay triangulation. Finally, a topology-guided multi-plane expansion mechanism propagates initial matches by exploiting the inherent structural regularity of street scenes, effectively suppressing mismatches while expanding coverage. Extensive experiments demonstrate that our framework outperforms state-of-the-art methods, achieving a 6.4% improvement in matching accuracy and a 30.5% reduction in mismatches under cross-daylight conditions. These advancements establish a new benchmark for reliable multi-source image retrieval and localization in dynamic urban environments, with direct applications in autonomous driving systems and large-scale 3D city reconstruction. Full article

This study investigates the effectiveness of sloped horizontal shading fins in enhancing visual comfort, electricity generation, and acoustic attenuation in a south-facing office room in Wrocław, Poland (51° latitude). A simulation-based approach combined Radiance daylight simulations, PV energy modeling, and graphical acoustic analysis. Four fin configurations were tested to identify the optimal design. The results indicate that Variant 3, featuring two 1 m wide fins inclined at 45°, achieved the best overall performance, increasing UDI_{300–3000/168} from 53.1% to 95.8%, reducing DGP from 50% to 27%, and enabling an estimated annual electricity production of 4.67 MWh. Additionally, applying sound-absorbing material on the shaded side of the fins significantly reduced reflective acoustic wave bounces, significantly reducing façade-exposed noise. This multifunctional solution demonstrates a practical and scalable strategy for improving office environmental quality in temperate climates, contributing to energy efficiency, acoustic comfort, and visual well being. Full article

Background/objectives: British swimmers are at a heightened risk of vitamin D deficiency (serum 25-hydroxyvitamin D (25(OH)D): <50 nmol∙L⁻¹) as their large indoor training volumes often restrict sunlight exposure, especially during the winter when daylight hours are reduced in the United Kingdom. Previous research has recommended supplementation with 4000 IU∙day⁻¹ vitamin D₃ from October to March to offset vitamin D losses. However, no current study has analysed this approach over multiple seasons to assess if this is an appropriate strategy. Methods: Using a quasi-experimental design, twenty-nine world-class British swimmers (aged 16–30 years) provided a 10 mL venous blood sample (fasted) as part of their routine haematological screening in the September of three consecutive years (2018, 2019, and 2020). Serum 25(OH)D was determined by radioimmunoassay, and this result determined the length of the standardised vitamin D3 protocol (<30 nmol∙L⁻¹: 4000 IU∙day⁻¹ from September to March; 30–79 nmol∙L⁻¹: 4000 IU∙day⁻¹ from October to March; >75 nmol∙L⁻¹: no supplementation). Results: Mean serum 25(OH)D concentrations increased each year (2018: 76.4 ± 28.4 nmol∙L⁻¹, 2019: 91.5 ± 24.8 nmol∙L⁻¹, 2020: 115.0 ± 36.6 nmol∙L⁻¹, p < 0.001), which coincided with the eradication of vitamin D deficiency after one season (prevalence, 2018: 10%, 2019: 0%, 2020: 0%). In September 2020, 35% of swimmers had a serum 25(OH)D > 125 nmol∙L⁻¹, although it is currently debated whether this is a concern or a benefit for athletic populations. Conclusions: Supplementing with 4000 IU∙day⁻¹ of vitamin D₃ throughout the winter can increase the vitamin D status of swimmers. However, more frequent testing may be required to ensure that serum 25(OH)D remains within the sufficient range across the season (75–125 nmol∙L⁻¹). Full article

As the global focus on sustainability intensifies, architects and engineers are increasingly seeking innovative passive strategies to improve building energy efficiency. Among these strategies, the strategic integration of louvers has garnered significant attention due to their potential to optimize building envelope performance and reduce energy consumption. Louvers effectively manage solar heat gain, mitigating the impact of extreme temperatures on indoor spaces. Consequently, louvers reduce the reliance on active HVAC systems, leading to notable energy savings and a decreased carbon footprint. This paper presents a comprehensive review of the role of louvers in enhancing building energy efficiency, highlighting their designs, efficiency, and improvement suggestions. Moreover, this review article addresses potential challenges related to louver design, such as balancing the trade-off between solar heat gain and daylighting and how to optimize louver configurations for specific building types. Approaches to overcome these challenges, including advanced modeling techniques and parametric design, are also explored to assist architects and designers in achieving the most energy-efficient outcomes. Full article