Search Results (11,327)

The methanol oxidation reaction (MOR) of direct methanol fuel cells (DMFCs) is limited by the slow kinetic process and high reaction energy barrier, significantly restricting the commercial application of DMFCs. Therefore, developing MOR catalysts with high activity and stability is very important. In this paper, oxygen-functionalised activated carbon (FAC) with controllable oxygen-containing functional groups was prepared by adjusting the volume ratio of H₂SO₃/HNO₃ mixed acid, and Pd/AC and Pd/FAC catalysts were synthesised via the hydrazine hydrate reduction method. A series of characterisation techniques and electrochemical performance tests were used to study the catalyst. The results showed that when V(H₂SO₃):V(HNO₃) = 2:3, more defects were generated on the surface of the AC, and more oxygen-containing functional groups represented by C=O and C–OH were attached to the surface of the support, which increased the anchor sites of Pd and improved the dispersion of Pd nanoparticles (Pd NPs) on the support. At the same time, the mass–specific activity of Pd/FAC for MOR was 2320 mA·mg_Pd, which is 1.5 times that of Pd/AC, and the stability was also improved to a certain extent. In situ infrared spectroscopy further confirmed that oxygen functionalisation treatment promoted the formation and transformation of *COOH intermediates, accelerated the transformation of CO_L into CO_B, reduced the poisoning of CO_ads species adsorbed to the catalyst, optimised the reaction path and improved the catalytic kinetic performance. Full article

This paper analyzes how two major economic downturns—a recession and a stagflation—affected convergence in the European Union (EU). Absolute and conditional convergence rates are estimated using ordinary least squares (OLS) semilog regressions based on cross-sectional data from 2004 to 2022. The study tests two hypotheses: there was no absolute convergence in the EU during either the recession or the stagflation period, and conditional convergence occurred during the recession but not during stagflation. The regression results indicate that neither hypothesis can be rejected. External variables—economic openness, inflation, and investment—were more influential during stable periods, whereas internal variables—debt, unemployment, and the control of corruption—had a greater impact during crises. These findings suggest that the EU was more institutionally prepared for the stagflation due to mechanisms developed after the financial crisis, but these tools proved less effective in addressing supply-side shocks. Full article

Background: Preparing patients for surgery considers assessing the patient’s somatic health, for example by the American Society of Anesthesiology (ASA) scale or the Revised Cardiac Risk Index (RCRI), known as the Lee index. This process usually ignores mental functioning (personality and anxiety), which is known to influence health. The purpose of this study is to analyze the existence of a relationship between personality traits (the Big Five model and trait-anxiety) and anesthesia scales (ASA scale, Lee index) used for the preoperative evaluation of patients. Methods: The study group comprised 102 patients (59 women, 43 men) scheduled for hip replacement surgery. Patients completed two psychological questionnaires: the NEO-FFI (NEO Five Factors Inventory) and the X-2 STAI (State-Trait Anxiety Inventory) sheet. Next, the presence and possible strength of the relationship between personality traits and demographic and medical variables were analyzed using Spearman’s rho rank correlation coefficient. Results: Patients with a high severity of trait anxiety are classified higher on the ASA scale (rs = 0.359; p < 0.001). Neuroticism, defined according to the Big Five model, significantly correlates with scales of preoperative patient assessment: the ASA classification (rs = 0.264; p < 0.001) and the Lee index (rs = 0.202; p = 0.044). A hierarchical regression model was created to test the possibility of predicting ASA scores based on personality. It explained more than 34% of the variance and was a good fit to the data (p < 0.05). The controlled variables of age and gender accounted for more than 23% of the variance. Personality indicators (trait anxiety, neuroticism) additionally accounted for slightly more than 11% of the variance. Trait anxiety (Beta = 0.293) proved to be a better predictor than neuroticism (Beta = 0.054). Conclusions: These results indicate that inclusion of personality screening in the preoperative patient evaluation might help to introduce a more individualized approach to patients, which could result in better surgical outcomes. Full article

Given the importance of turbidity as a key indicator of water quality, this study investigates the use of a convolutional neural network (CNN) to classify water samples into five turbidity-based categories. These classes were defined using ranges inspired by Mexican environmental regulations and generated from 33 laboratory-prepared mixtures with varying concentrations of suspended clay particles. Red, green, and blue (RGB) images of each sample were captured under controlled optical conditions, and turbidity was measured using a calibrated turbidimeter. A transfer learning (TL) approach was applied using EfficientNet-B0, a deep yet computationally efficient CNN architecture. The model achieved an average accuracy of 99% across ten independent training runs, with minimal misclassifications. The use of a lightweight deep learning model, combined with a standardized image acquisition protocol, represents a novel and scalable alternative for rapid, low-cost water quality assessment in future environmental monitoring systems. Full article

Robots are increasingly emerging as effective platforms to overcome a wide range of challenges in agriculture. Beyond functioning as standalone systems, agricultural robots are proving valuable as collaborative platforms, capable of supporting and integrating with humans and other technologies and agricultural activities. In this study, we designed and implemented an automated system embedded in a ground-based robotic platform to support spraying drone operations. The system consists of a robotic platform that carries the spraying drone along with all necessary support devices, including a water tank, chemical reservoirs, a mixer, generators for drone battery charging, and a top landing pad. The system is controlled with a mobile app that calculates the total amount of water and chemicals required and sends commands to the platform to prepare the application mixture. The input information in the app includes the field area, application rate, and up to three chemical dosages simultaneously. Additionally, the platform allows the drone to take off from and land on it, enhancing both safety and operability. A set of pumps was used to deliver water and chemicals as specified in the mobile app. To automate pump control, we used Arduino technology, including both the microcontroller and a programming environment for coding and designing the mobile app. To validate the system’s effectiveness, we individually measured the amount of water and chemical delivered to the mixer tank and compared it with conventional manual methods for calculating chemical quantities and preparation time. The system demonstrated consistent results, achieving high precision and accuracy in delivering the correct amount. This study advances the field of agricultural robotics by highlighting the role of collaborative platforms. Particularly, the system presents a valuable and low-cost solution for small farms and experimental research. Full article

Background/Objectives: Swine influenza A virus (swIAV), a prevalent respiratory pathogen in porcine populations, poses substantial economic losses to global livestock industries and represents a potential threat to public health security. Neuraminidase (NA) has been proposed as an important component for universal influenza vaccine development. NA has potential advantages as a vaccine antigen in providing cross-protection, with specific antibodies that have a broad binding capacity for heterologous viruses. In this study, we evaluated the immunogenicity and protective efficacy of a tetrameric recombinant NA subunit vaccine in a swine model. Methods: We constructed and expressed structurally stable soluble tetrameric recombinant NA (rNA) and prepared subunit vaccines by mixing with ISA 201 VG adjuvant. The protective efficacy of rNA-ISA 201 VG was compared to that of a commercial whole inactivated virus vaccine. Pigs received a prime-boost immunization (14-day interval) followed by homologous viral challenge 14 days post-boost. Results: Both rNA-ISA 201 VG and commercial vaccine stimulated robust humoral responses. Notably, the commercial vaccine group exhibited high viral-binding antibody titers but very weak NA-specific antibodies, whereas rNA-ISA 201 VG immunization elicited high NA-specific antibody titers alongside substantial viral-binding antibodies. Post-challenge, both immunization with rNA-ISA 201 VG and the commercial vaccine were effective in inhibiting viral replication, reducing viral load in porcine respiratory tissues, and effectively mitigating virus-induced histopathological damage, as compared to the PBS negative control. Conclusions: These findings found that the anti-NA immune response generated by rNA-ISA 201 VG vaccination provided protection comparable to that of a commercial inactivated vaccine that primarily induces an anti-HA response. Given that the data are derived from one pig per group, there is a requisite to increase the sample size for more in-depth validation. This work establishes a novel strategy for developing next-generation SIV subunit vaccines leveraging NA as a key immunogen. Full article

This study investigates the effectiveness of the Xsens motion capture system in performing ergonomic analysis compared to traditional manual assessments by experts in the specific environment of assembly lines. A comprehensive literature review emphasizes the need to investigate the reliability of new, promising high-tech systems. The main objective was therefore to compare the Ergonomic Assessment Worksheet (EAWS) assessment approach performed with Xsens motion capture technology and Process Simulate V16 software with the manual method using EAWS digital prepared by experts in the controlled workflow. The greatest value of the research conducted lies in the novel integration of the state-of-the-art Xsens motion capture technology with the Process Simulate V16 software environment and the use of the licensed EAWS ergonomic method and Methods-Time Measurement Universal Analyzing System (MTM-UAS). The results are presented in the form of a case study. The results show a large similarity between the whole-body results and a large difference in the upper limb results, confirming the initial benefits of the Xsens equipment but also pointing to the need to verify its reliability on larger samples. The study highlights the potential of integrating Xsens motion capture data into ergonomic assessments and tuning of the assembly line to increase productivity and worker safety. Full article

Syphilis, which is caused by Treponema pallidum, remains one of the most common congenital infection worldwide and has tremendous consequences for the mother and her developing foetus if left untreated. The complexity of the exposure to this pathogen extends beyond the well-established clinical manifestations, as it can profoundly affect placental histomorphology. This study aimed to compare T. pallidum-exposed placental villi structures with healthy placentae at term to evaluate the histomorphological differences using stereology. In this case-control study conducted at term (38 weeks ± 2 weeks), 78 placentae were collected from the hospital delivery suites, comprising 39 cases (T. pallidum-exposed) and 39 controls (non-exposed), who were gestational age-matched with other potential confounders excluded. Blood samples from the umbilical vein and placental basal plate were tested for syphilis, using rapid diagnostic test (RDT) kits for T. pallidum (TP) antibodies (IgG and IgM) to classify placentae as exposed to T. pallidum (cases) and non-exposed (controls). Tissue sections were prepared and stained with haematoxylin and eosin, and the mean volume densities of syncytial knots, foetal capillaries, syncytial denuded areas, and intervillous spaces were estimated using stereological methods. Statistical analysis was performed to compare the mean values between the case and control groups. Stereological assessment revealed significant differences between the T. pallidum-exposed and non-exposed groups with regard to syncytial knots (p < 0.0001), syncytial denudation (p < 0.0001), and foetal capillaries (p < 0.0001), but no significant difference in the intervillous space was found (p = 0.1592). Therefore, our study shows, for the first time, that the histomorphology of human placental villi appears to be altered by exposure to T. pallidum. It will, therefore, be interesting to determine whether these changes in the placental villi translate into long-term effects on the baby. Full article

High safety gel polymer electrolyte (GPE) is used in lithium metal solid state batteries, which has the advantages of high energy density, wide temperature range, high safety, and is considered as a subversive new generation battery technology. However, solid-state lithium batteries with multiple layers and large capacity currently have poor cycle life and a large gap between the actual output cycle capacity retention rate and the theoretical level. In this paper, polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP)/polyacrylonitrile (PAN)—lithium perchlorate (LiClO₄)—lithium lanthanum zirconium tantalate (LLZTO) gel polymer electrolytes was prepared by UV curing process using a UV curing machine at a speed of 0.01 m/min for 10 s, with the temperature controlled at 30 °C and wavelength 365 nm. In order to study the performance and failure mechanism of multilayer solid state batteries, single and three layers of solid state batteries with ceramic/polymer composite gel electrolyte were assembled. The results show that the rate and cycle performance of single-layer solid state battery with gel electrolyte are better than those of three-layer solid state battery. As the number of cycles increases, the interface impedance of both single-layer and three-layer electrolyte membrane solid-state batteries shows an increasing trend. Specifically, the three-layer battery impedance increased from 17 Ω to 42 Ω after 100 cycles, while the single-layer battery showed a smaller increase, from 2.2 Ω to 4.8 Ω, indicating better interfacial stability. After 100 cycles, the interface impedance of multi-layer solid-state batteries increases by 9.61 times that of single-layer batteries. After 100 cycles, the corresponding capacity retention rates were 48.9% and 15.6%, respectively. This work provides a new strategy for large capacity solid state batteries with gel electrolyte design. Full article

Structural regulation is of great significance for improving the comprehensive performance of energetic materials (EMs). The structural regulation and properties of EMs were summarized. For single-component EMs, particle size control focuses on quality consistency and industrial scalability, morphology modification mainly improves sphericity through monomers or aggregates and explores the possibility of layered energetic materials in improving mechanical properties, and polycrystalline regulation suppresses metastable phases and explores novel crystalline forms using simulation-guided design. Composite EMs (CEMs) employ core–shell structures to balance safety with performance via advanced coating materials, cocrystal engineering to tailor energy release through intermolecular interactions, and lattice strain modulation, and mixing structures integrates component advantages while enhancing the reaction efficiency. Future directions emphasize computational simulations and novel fabrication methods to guide the rational design and precise preparation of next-generation EMs with specific functions. Full article

Traditional taco preparation methods, such as oil immersion and steaming, can significantly affect the nutritional and metabolic characteristics of the final product. This study evaluated tacos made with five commercial nixtamalized maize flours and four common fillings (chicharron, beef skirt, potato, and refried beans), processed using three different methods: Plain, Full-Fat, and Patted-Dry. We assessed their chemical composition, starch digestibility, and thermal properties, and measured satiety-related hormone responses in mice. Fillings had a stronger influence on protein, fat, and moisture content than tortilla type. Full-fat tacos exhibited increased amylose–lipid complex formation and a lower gelatinization enthalpy, whereas plain tacos retained more retrograded starch and a crystalline structure. In vitro digestion revealed that Plain tacos, especially those with plant-based fillings, had the highest resistant starch content and the lowest predicted glycemic index. Hierarchical clustering showed that resistant starch, moisture, and gelatinization onset temperature were closely linked in the Plain samples, whereas lipid-driven variables dominated in the Full-Fat tacos. In mice, tacos with a higher resistant starch content led to greater GLP-1 levels, lower ghrelin levels, and reduced insulin responses, suggesting improved satiety and glycemic control. Patted-Dry tacos showed intermediate hormonal effects, supporting their potential as a balanced, health-conscious alternative. These findings demonstrate how traditional preparation techniques can be leveraged to enhance the nutritional profile of culturally relevant foods, such as tacos. Full article

Lactic acid bacteria fermentation has the potential to enhance the biological activity of bamboo shoot polyphenols. The aim of this study was to investigate the release pattern and biotransformation mechanism of bound phenols from bamboo shoots prepared by fermentation with Lactobacillus acidophilus, Pediococcus pentosaceus, and Lactobacillus plantarum. The results showed that compared with unfermented controls, bound forms of vanillic acid, p-coumaric acid, and ferulic acid significantly decreased, while their free forms increased substantially after 6 d fermentation (p < 0.05). Quantitative analysis revealed particularly dramatic transformations for p-coumaric acid, which showed a 30–3000% increase in free form, and ferulic acid with a 203–359% increase in free form. Pediococcus pentosaceus demonstrated outstanding performance in bound phenol release and conversion, correlating with its higher β-glucosidase (0.67 U/g) and ferulic acid esterase (0.69 U/g) production. FITR, SEM, and IFM also demonstrated that LAB fermentation led to changes between free and bound phenols in bamboo shoots. These results demonstrate Pediococcus pentosaceus fermentation most effectively liberates bound phenolics, significantly improving their bioavailability for functional food applications. Full article

Extracellular vesicles (EVs) have emerged as promising acellular tools for modulating immune responses for tissue engineering applications. This study explores the potential of human fibroblast-derived EVs delivered within a three-dimensional (3D) injectable scaffold composed of polycaprolactone (PCL) nanofibers and collagen (PNCOL) to reprogram macrophage behavior and support scaffold integrity under inflammatory conditions. EVs were successfully isolated from human fibroblasts using ultracentrifugation and characterized for purity, size distribution and surface markers (CD63 and CD9). Macrophage-laden PNCOL scaffolds were prepared under three conditions: macrophage-only (MP), fibroblast co-encapsulated (F-MP), and EV-encapsulated (EV-MP) groups. Structural integrity was assessed via scanning electron microscopy and Masson’s trichrome staining, while immunomodulatory effects were evaluated through metabolic assays, gene expression profiling, and immunohistochemistry for macrophage polarization markers (CD80, CD206). When co-encapsulated with pro-inflammatory (M1) macrophages in PNCOL scaffolds, fibroblast-derived EVs preserved scaffold structure and significantly enhanced macrophage metabolic activity compared to the control (MP) and other experimental group (F-MP). The gene expression and immunohistochemistry data demonstrated substantial upregulation of anti-inflammatory markers (TGF-β, CD163, and CCL18) and surface protein CD206, indicating a phenotypic shift toward M2-like macrophages for EV-encapsulated scaffolds relative to the other groups. The findings of this study demonstrate that fibroblast-derived EVs integrated into injectable PCL–collagen scaffolds offer a viable, cell-free approach to modulate inflammation, preserve scaffold structure, and support regenerative healing. This strategy holds significant promise for advancing immuno-instructive platforms in regenerative medicine, particularly in settings where conventional cell therapies face limitations in survival, cost, or safety. Full article

Electroporation-mediated gene delivery is a cornerstone of synthetic biology, offering several advantages over other methods: higher efficiencies, broader applicability, and simpler sample preparation. Yet, electroporation protocols are often challenging to integrate into highly multiplexed workflows, owing to limitations in their scalability and tunability. These challenges ultimately increase the time and cost per transformation. As a result, rapidly screening genetic libraries, exploring combinatorial designs, or optimizing electroporation parameters requires extensive iterations, consuming large quantities of expensive custom-made DNA and cell lines or primary cells. To address these limitations, we have developed a High-Throughput Microfluidic Electroporation (HTME) platform that includes a 384-well electroporation plate (E-Plate) and control electronics capable of rapidly electroporating all wells in under a minute with individual control of each well. Fabricated using scalable and cost-effective printed-circuit-board (PCB) technology, the E-Plate significantly reduces consumable costs and reagent consumption by operating on nano to microliter volumes. Furthermore, individually addressable wells facilitate rapid exploration of large sets of experimental conditions to optimize electroporation for different cell types and plasmid concentrations/types. Use of the standard 384-well footprint makes the platform easily integrable into automated workflows, thereby enabling end-to-end automation. We demonstrate transformation of E. coli with pUC19 to validate the HTME’s core functionality, achieving at least a single colony forming unit in more than 99% of wells and confirming the platform’s ability to rapidly perform hundreds of electroporations with customizable conditions. This work highlights the HTME’s potential to significantly accelerate synthetic biology Design-Build-Test-Learn (DBTL) cycles by mitigating the transformation/transfection bottleneck. Full article

The durability and fire resilience of concrete structures are increasingly critical in modern construction, particularly under elevated-temperature exposure. With this context, the current study explores the thermal and microstructural characteristics of geopolymer-based ultra-high-performance concrete (G-UHPC) incorporating quartz powder (QP) and silica fume (SF) after exposure to elevated temperatures. SF was used at 15% and 30% to partially replace the precursor material, while QP was used at 25%, 30%, and 35% as a partial replacement for fine sand. The prepared specimens were exposed to 200 °C, 400 °C, and 800 °C, followed by air cooling. Mechanical strength tests were conducted to evaluate compressive and flexural strengths, as well as failure patterns. Microstructural changes due to thermal exposure were assessed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Among the prepared mixtures, the 30SF35QP mixture exhibited the highest compressive strength (156.0 MPa), followed by the 15SF35QP mix (146.83 MPa). The experimental results demonstrated that G-UHPC underwent varying levels of thermal degradation across the 200–800 °C range yet displayed excellent resistance to thermal spalling. At 200 °C, compressive strength increased due to enhanced geopolymerization, with the control mix showing a 29.8% increase. However, significant strength reductions were observed at 800 °C, where the control mix retained only 30.8% (32.0 MPa) and the 30SF25QP mixture retained 28% (38.0 MPa) of their original strengths. Despite increased porosity and cracking at 800 °C, the 30SF35QP mixture exhibited superior strength retention due to its denser matrix and reduced voids. The EDS results confirmed improved gel stability in the 30% SF mixtures, as evidenced by higher silicon content. These findings suggest that optimizing SF and QP content significantly enhances the fire resistance and structural integrity of G-UHPC, providing practical insights for the design of sustainable, high-performance concrete structures in fire-prone environments. Full article