Search Results (221)

The automotive industry is under pressure to reduce greenhouse gas emissions. While the growth of electric vehicles is crucial, optimizing low-voltage batteries for conventional powertrain architecture (12 V–48 V) can help reduce carbon dioxide emissions. Currently, lithium iron phosphate (LFP) batteries dominate the low-voltage battery market due to their stability, safety, and ecological benefits as replacement to lead-acid. However, sodium-ion batteries (SIB) are emerging as a promising alternative to LFP, offering advantages in power, lifespan, cold temperature performance, integration, cost, material availability, and sustainability. These advantages of sodium-ion batteries make them a perfect candidate for fulfilling the requirements typically associated with 48 V applications as well. This contribution evaluates low-voltage SIB prototypes developed by the company IAV GmbH and its partners and explores their potential for automotive applications, aiming to share insights and assess future prospects. Full article

The control of recrystallization in submillimeter-gauge electromagnetic pure iron strips is critical for developing high-sensitivity electromagnetic devices, yet the microstructure–property relationship during annealing remains poorly understood. This study systematically investigates the recrystallization topology, texture evolution, and their direct links to the electromagnetic properties in an industrially produced 0.5 mm thick DT4 electromagnetic pure iron cold-rolled strip (80% reduction) during annealing at 900 °C. By combining EBSD, XRD, and VSM, we found that recrystallization initiates at shear bands after 7 s and completes within 25 s, yielding equiaxed grains with an average size of 27.5 μm. Prolonged annealing to 180 s led to grain coarsening to 64 μm. Concurrently, the fraction of low-angle grain boundaries decreased dramatically from 69.6% to 9.09%. The recrystallization texture, dominated by oriented nucleation at shear bands, showed a stable γ-fiber component (~20% volume fraction) and a significantly attenuated α-fiber component (decreasing from 66.3% to 21.5%). The Goss texture ({110}<001>) increased notably from 0.54% to 14.0%, attributable to grain boundary energy minimization in the later stages. Recrystallization kinetics obeyed the JMAK model X_rex = 1 − exp (−2.29 × 10⁻⁸ t^6.434). Crucially, the completed recrystallization process reduced the coercivity (Hc) by 78.5% and increased the magnetic induction B₁₀₀₀₀ by 0.045T. These findings elucidate the recrystallization mechanism and establish a quantitative microstructure–property correlation, providing a theoretical foundation for optimizing industrial annealing processes for thin-gauge electromagnetic pure iron strips. Full article

The purpose of this research article is to assess the emissions performance of a marine genset that was retrofitted to combust biomethane in a dual-fuel mode. The retrofits are part of our research efforts to provide a green cold-ironing solution for vessels at berth or in anchorage, and to advocate for a greener electrification of the port sector. An experimental campaign is presented to test the emissions performance by substituting biomethane as an energy basis. Up to 60% biomethane energy substitution is tested under low, medium, and high engine loads. The engine load is controlled via a resistive load bank, and the respective emissions were captured using portable gas analyzers. The results reveal a poor utilization of the gaseous fuel, leading to low engine efficiencies, high CO, and unburnt hydrocarbons at low and intermediate engine loads. However, marine gensets are utilized at high engine loads. At these loads, the specific fuel consumption improves. As indicated in the open literature, biomethane leads to high CO, and unburnt hydrocarbons and the respective NO_x emissions drop compared to diesel-only cases. Full article

Antarctica harbors some of the most extreme ecosystems on earth, where only two vascular plants persist. The native grass Deschampsia antarctica provides a model for plant–microbe interactions under intense abiotic stress. We present the first multi-compartmental and multi-kingdom characterization of bacterial and fungal communities associated with D. antarctica across three South Shetland Islands. Metabarcoding revealed strong compartmentalization: the rhizosphere displayed the highest richness and complex bacterial–fungal networks; the root endosphere showed intermediate diversity with keystone taxa such as Rhizobiales and Streptomyces; and the leaf endosphere was simplified, dominated by stress-tolerant taxa including Pseudomonas and Helotiales. Despite marked soil heterogeneity, phosphorus enrichment at Admiralty Bay, base cations at Coppermine Cove, and iron at Byers Peninsula, a conserved core (20 bacterial and 5 fungal genera) persisted, mainly cold-adapted saprotrophs and plant-associated taxa. Fungal assemblages were more responsive to soil chemistry, with site-specific enrichments such as Zymoseptoria and Herpotrichia. Overall, D. antarctica holobionts exhibited a dual strategy: conserved microbial backbones confer stability, while localized assemblages shaped by soil chemistry and geography enhance adaptability. Together, these findings provide one of the most integrative characterizations of the D. antarctica holobiont to date, revealing how conserved and adaptive microbial components support plant resilience under extreme Antarctic conditions and offering valuable insights for predicting biological responses to ongoing climate change. Full article

Novel pure Zn and Zn-3Ag-xFe (x = 0, 1, 3, 5) (wt.%) nanocrystalline powders were synthesized for potential use as implants and stent materials by the mechanical alloying (MA) technique. The morphological and structural alterations of the powders milled for 5, 10, and 20 h were examined. SEM research revealed that during MA, the original elemental powder particles were subjected to a cold-welding process, subsequently fracturing in a brittle manner. The EDX spectra of the powders milled for 20 h indicated a uniform distribution of components. Laser diffraction particle size examination proved that the Zn-3Ag-1Fe alloy had the smallest particle size at 58.8 µm. XRD examination indicates the existence of AgZn₃ and Fe₃Zn₁₀ intermetallic phases. The crystallite size diminishes with prolonged milling time, decreasing from 130 nm to 30 nm. The porosity rose from 11.62% for pure Zn to 15.35% in the Zn-3Ag-5Fe alloy, suggesting that the incorporation of Ag and the higher Fe ratio diminished the compressibility of the milled powders, as evidenced by density tests. The Zn-3Ag-5Fe alloy exhibited the maximum corrosion current density of 164.65 µA/cm², attributed to the microgalvanic effect and reduced relative density induced by the Fe₃Zn₁₀ phase, which escalated with higher Fe doping. The hardness of the Zn-3Ag-5Fe alloy rose from 34.5 ± 2.8 HV to 132.2 ± 4.6 HV compared to the pure Zn sample, while the wear coefficient decreased from 0.029 ± 0.003 mm³/Nm to 0.005 ± 0.001 mm³/Nm, corresponding with the hardness test results. In contrast to S. aureus, which exhibited an 87.8% susceptibility to antibacterial activity from 3% silver and iron additions, E. coli demonstrated over 85% susceptibility to antibacterial activity from silver addition alone. The Zn-3Ag and Zn-3Ag-1Fe samples demonstrated high biocompatibility, attaining cell survival rates of 99.2% ± 3.01% and 99.2% ± 4.02% for the 12.5% extract, respectively. This study demonstrates that the newly developed Zn-Ag-xFe alloys have exceptional mechanical properties and excellent biocompatibility. Furthermore, the variable biodegradation rate dependent on alloy type presents an avenue for further research. Full article

The present study explores the production of metallized titanomagnetite briquettes, with a view to addressing two key issues. Firstly, it seeks to address the growing shortage of high-quality iron-bearing raw materials. Secondly, it looks at how to meet the increasingly stringent environmental constraints. The conventional blast-furnace treatment of titanomagnetite is hindered by the formation of refractory Ti-rich slags. It is hereby proposed that a single-cycle briquetting process in conjunction with a thermal reduction route should be utilized. This approach enables precise regulation of the Fe/flux ratio. Experiments were conducted on a low-grade titanomagnetite concentrate (68.5% Fe) from the Pervouralsk deposit (Russia). Cylindrical briquettes (D 15–20 mm, h 8–10 mm) were subjected to a pressure of 300 MPa during the pressing process, with the utilization of diverse binders comprising rubber cement, CaO, graphite + water, and basic oxygen-furnace (BOF) slag + sodium silicate. Following an oxidative pre-heating process at 1300 °C for two hours, followed by a gas-based reduction process at 1050 °C for three hours, with a CO/N₂ ratio of 90/10, the products demonstrated an oxidation rate of 85–95% and a cold compression strength of 16–80 MPa. The highest observed strength (80 MPa) was obtained with a binder comprising CaO·MgO·2SiO₂ (diopside/merwinite), which forms a low-viscosity melt, fills 90% of pores and crystallizes as acicular Mg-SFCA-I during cooling. Conversely, the CaO·TiO₂ and FeO·TiO₂ + Fe₃C associations yield brittle structures and a maximum strength of 16 MPa. The optimum briquette (0.55% CaO, D/H = 20/10 mm) exhibited a 95.7% metallization degree, a compressive strength of 48.9 MPa, and dimensional changes within acceptable limits, thus fulfilling the requirements for electric arc furnace feedstock. Further research is required in the form of a full Life Cycle Assessment and pilot-scale testing. However, the results obtained thus far confirm that titanomagnetite briquettes with a binder consisting of CaO, MgO and SiO₂ are a promising alternative to pellets for low-carbon steelmaking. Full article

This study aims to provide a detailed analysis of the design choices and economic sustainability aspects associated with the implementation of shore-to-ship electrification, commonly known as “cold ironing”, in port docks, pertaining to the Italian context. This innovative technological solution aims to reduce the environmental impact of port operations by allowing docked ships to turn off their engines and connect directly to the shore-side power supply. A detailed analysis of present standards and applicable legislation is presented and implemented. Therefore, the objective of this work is to determine the conditions that make shore-side power supply economically sustainable and to study the most plausible future scenarios of greatest interest through the definition of possible management models integrated into the national and EU fiscal system. This enables a quantitative and reliable assessment of the current cold ironing incentive policies in promoting this technology, with some guidelines provided for the future promotion of this sector. Full article

This paper presents comprehensive studies of pitting corrosion, which precedes the appearance of fistulas in galvanized steel pipelines of hot and cold water supply systems. Corroded galvanized pipes taken out from water supply systems within their operation and scale samples were the subject of this research. The current work continues the research on one of the four structural elements of tubercles—the dense layer. The corrosion of the zinc coating and the steel base of pipes inside the tubercles led to a gradual increase in the concentration of a solution containing components of the corroding metal (zinc and iron cations) and anions in water (mainly chlorides and sulfates). To explain the corrosion under the tubercles, their dense layer was compared with an anion exchange membrane with selective properties, which provided the primary concentration of the salt solution in the structure of the tubercles with a significant increase in the concentration of aggressive anions compared to the source water. The formation of fistulas in the cavity leads to a secondary concentration of solution inside the tubercle, mainly consisting of iron chloride. At the same time, due to the hydrolysis of the formed iron salts and a decrease in pH, the corrosion rate increases and becomes independent of external conditions. This article summarizes ten years of experience in examining corrosion of steel pipes from external and internal water supply systems. Full article

Iron-based metallic glasses are gaining increased interest due to their good glass-forming ability, high compressive strength, high corrosion resistance, catalytic properties, excellent soft magnetic properties, and relatively low cost. Cold spraying was successfully used to produce amorphous coatings from commercially available powder without any crystallization due to its high cooling rate and short processing time, minimizing thermal influences. Thick and dense amorphous coatings were obtained. The effect of a substrate on the microstructure, phase composition, microhardness, flexural strength, and wear behaviour of the coatings was investigated. The cold sprayed coatings revealed an almost complete amorphous structure and negligible porosity. The coating deposited on the steel substrate showed higher microhardness, better resistance to loose abrasive wear, and a slightly lower wear index tested in the coating and Si₃N₄ ball tribological association than that cold sprayed on an Al alloy. The force required to destroy the durability of the coating–steel substrate system estimated during three-point bending tests was also much higher. Both coatings were characterized by a comparable friction coefficient. Full article

Shore power systems, also known as cold ironing or shore-to-ship (STS) connections, are increasingly recognized as a viable solution to reduce emissions and noise from ships during berthing operations. This paper provides a comprehensive overview of shore power technology, with a focus on typical onboard energy consumption profiles across different types of ship, the main electrical architectures used in shore-side systems, and the compatibility challenges related to frequency, voltage, and control integration. The paper reviews international standards, particularly the ISO/IEC/IEEE 80005 series, that define technical requirements for interoperability and safety. A detailed analysis of recent patents highlights technological innovations in mobility, conversion topologies, and high-voltage integration. In addition, commercially available shore power solutions from major manufacturers are surveyed, with comparative data on power ratings, voltage levels, and converter topologies. Finally, the study discusses current limitations and outlines development directions for Onshore Power Supply systems, including regulatory developments, digital integration, and grid support functionalities. The insights presented aim to support the design, standardization, and deployment of efficient and scalable STS systems in line with global maritime decarbonization goals. Full article

Basic helix-loop-helix (bHLH) transcription factors represent one of the largest transcriptional regulator families in cereal crops such as rice, maize, and wheat. They play crucial and diverse roles in regulating key agronomic traits and essential physiological processes. This review provides a systematic synthesis of the functionally characterized bHLH genes across the three major cereals, offering a comparative perspective on their roles in growth, development, and stress responses. We comprehensively summarize their documented functions, highlighting specific regulators such as TaPGS1 for grain size, rice ILI subfamily for leaf angle, OsbHLH004 for seed dormancy and maize “Ms23-Ms32-bHLH122-bHLH51” cascade for the anther development. Their conserved and species-specific functions in iron homeostasis (e.g., IRO2) and in responses to drought, cold, salinity, and pathogens are also detailed. Additionally, we discuss the underlying molecular mechanisms, including specific binding to E-box/G-box cis-elements, protein dimerization, and integration with hormone signaling pathways. By integrating the current knowledge, this review serves as a consolidated and up-to-date reference that highlights the strategic potential of bHLH transcription factors in molecular breeding programs for improving yield, quality, and stress tolerance in cereals. Full article

This article explores Truman Capote’s parodic/reconstructive exploitation of decadent aesthetics in his “Southern Gothic” novel, Other Voices, Other Rooms (1948), as dissident self-distancing from postwar conservatism. Modernist Southern Gothic writers owe European decadent culture for their thematization of the sociocultural decay of the antebellum South and characterization of dandiacal dissidents, while often reiterating the claustrophobic mood of the patriarchal and racist society and excluding/villainizing those dandies. Critically analogizing the nationalist heteronormativity of the early-Cold War American society with the oppressive patriarchy of the South, OVOR playfully deconstructs the tragic narrative of Modernist Southern Gothic by foregrounding the reparative aspect of decadent aesthetics mainly through the pedagogic relationship between a Wildean dilettante, Randolph, and a young protagonist, Joel. Simultaneously, with the ironical self-satire against the potential authoritarianism of white bourgeois decadence, Capote democratizes decadent aesthetics as a non-normative survival method through the exposure of Randolph’s vulnerability and the parodic adaptation of his dilettantism by the non-white characters. I argue that OVOR marks the vacillating but inevitable transition from decadence to camp as a seemingly non-political but necessary survivalist strategy in the Cold War/Pre-Stonewall American society that conducts surveillance of, persecutes, and stigmatizes as “decadence” non-normative genders and sexualities. Full article

Background: Temperature regulation is impaired in iron-deficient anemic humans and rats at rest during cold exposure. However, there is a paucity of data regarding the interplay of cold exposure, anemia, and exercise on thermal and cardiovascular responses. Therefore, we aimed to explore thermal and cardiovascular responses of individuals with chronic mild iron-deficiency anemia during exercise in the cold compared to controls. Methods: Nine anemic (5 F, 4 M) and nine control (5 F, 4 M) individuals, matched for body fat, size, and mass but different by design in hematological parameters and physical fitness, participated in the study. The participants cycled in cold 11 °C with 40% relative humidity (RH) and neutral (22 °C, 40% RH) conditions at an intensity ~10% below the respiratory threshold until 1 °C increase in rectal temperature (T_re) or 1 h of exercise, whichever occurred first. Results: In the cold, the anemic individuals showed a lower rate of T_re rise (p = 0.047) and lower mean skin temperature (T_sk) (p = 0.03) compared to controls, while only controls increased heat production compared to the neutral condition (p = 0.035). Moreover, the anemic group exhibited an exaggerated blood pressure response in the cold compared to the neutral environment (p < 0.05), due to heightened total peripheral resistance (p < 0.05) and vasomotor response (p < 0.001). Conclusions: In summary, chronic mild iron-deficiency anemia impaired temperature regulation as judged from the lower rate of T_re rise and an inability to activate further the metabolism at cold. Concomitantly, the anemic participants demonstrated increased cardiovascular strain. This is notable because anemia and these environmental conditions are encountered in the workplace, recreational activities, and athletic endeavors. These findings may inform safety guidelines for athletes, workers, and patients exposed to cold environments. Full article

Edible and medicinal fungi are a general term for large fungi with both edible and medicinal values. As a unique wild edible and medicinal fungus in the Qinghai-Tibet Plateau, the ‘Four Medical Classics’ of the Tang Dynasty has recorded Floccularia luteovirens effects of external application and internal administration on swelling, cold disease, and neck stiffness. At present, it has not been artificially domesticated and has significant development potential. The mushroom is rich in nutrients. The crude protein content of 100 g dried product is 33~39% (up to 38.71 g, about 2.2 times that of Flammulina velutipes). It contains 19 amino acids (including 8 essential amino acids for the human body; tryptophan accounts for 21.55~22.63%). It is also rich in minerals such as selenium, zinc (0.09 g/kg), and iron (0.3 g/kg) and vitamins B1 (0.10 mg), B2 (1.10 mg), C (4.50 mg), and E (6.20 mg). Among the functional active substances, polysaccharides (containing 20.1% β-glucan and 5.7% mannan-oligosaccharide) had antioxidant and immunomodulatory effects, which could alleviate the weight loss of diabetic rats. The IC50 of DPPH free radical scavenging rate of phenolics (ferulic acid, etc.; total phenolic content of 4.21 ± 0.06 mg/g) was 43.85 μg/mL; there was also adenosine, volatile oil, and other components. Pharmacologically, the DPPH free radical scavenging rate of the extract was 65 ± 0.46%, the tumor inhibition rate of the polysaccharide on the tumor-bearing mice was 42.48%, the gastrodin was biocatalyzed (conversion rate 85.2%), and the extracellular polysaccharide could inhibit the color change in shrimp to achieve preservation. This paper reviews its related research progress and provides a reference for its development in the fields of healthy food and biomedicine. Full article

With the increasing intensity of resource development in alpine regions, numerous geotechnical engineering problems in cold regions have become increasingly prominent. In order to explore the damage and deterioration laws of rocks caused by freeze–thaw action, this paper takes the biotite granulite on the eastern slope of Yanshan Iron Mine as the research object. By analyzing the changes in mechanical and acoustic emission parameters of rock samples after freeze–thaw, and combining with existing freeze–thaw damage theories, the suitable freeze–thaw damage mechanism for this rock is further explored, and a freeze–thaw damage model for biotite granulite with low and high freeze–thaw cycles is established. The results of this study demonstrate that biotite granulite subjected to a lower number of freeze–thaw cycles exhibits significantly greater reductions in peak strength, elastic modulus, acoustic emission (AE) hit counts, cumulative ringing counts, and cumulative energy compared with specimens exposed to a higher number of cycles. As the freeze–thaw cycles increase, the formation of newly generated large-scale fractures during failure becomes progressively less pronounced, leading to a diminished resistance to deformation and a gradual increase in plastic deformation during loading. A coupled damage variable relationship was established for biotite granulite under both low and high freeze–thaw regimes based on cumulative AE ringing counts. In the early three stress stages, specimens subjected to fewer cycles exhibited fewer microcracks, with no clear spatial correlation between their distribution and the eventual fracture coalescence zones, whereas specimens exposed to a higher number of cycles showed a distinct sequential relationship between microcrack initiation sites and subsequent crack coalescence. Building upon existing freeze–thaw damage theories, the freeze–thaw damage mechanism specific to biotite granulite was further elucidated. Accordingly, a freeze–thaw damage model for low- and high-cycle conditions was developed and preliminarily validated. Full article