Search Results (195)

This study aimed to develop and characterize biodegradable films based on potato starch reinforced with carboxymethylcellulose (CMC) and polyethylene oxide (PEO) nanofibers, with the goal of improving their mechanical and thermal properties for potential use in sustainable packaging. The films were prepared through the thermal gelatinization of starch extracted from tubers, combined with nanofibers obtained by electrospinning CMC synthesized from potato starch. Key electrospinning variables, including solution concentration, voltage, distance, and flow rate, were analyzed. The films were morphologically characterized using scanning electron microscopy (SEM) and chemically analyzed by Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD), and their thermal properties were assessed by Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The results indicated an increase in tensile strength to 14.1 MPa in the reinforced films, compared to 13.6 MPa for pure starch and 7.1 MPa for the fiber-free CMC blend. The nanofibers had an average diameter of 63.3 nm and a porosity of 32.78%. A reduction in crystallinity and more stable thermal behavior were also observed in the composite materials. These findings highlight the potential of using agricultural waste as a functional reinforcement in biopolymers, providing a viable and environmentally friendly alternative to synthetic polymers. Full article

Background: Periodontitis is a chronic inflammatory disease influenced by host aging, yet the specific effects of aging on disease susceptibility remain unclear. Objective: This study aimed to evaluate whether aging increases susceptibility to Porphyromonas gingivalis (P. gingivalis)-induced periodontitis in a murine model. We formulated the null hypothesis that age does not affect susceptibility to periodontal bone loss. Methods: Young (8 weeks) and aged (78 weeks) male C57BL/6 mice were randomly assigned into four groups: young control, young infected, old control, and old infected (n = 8 per group, except for old control, where n = 7). Experimental periodontitis was induced by oral application of P. gingivalis suspended in 5% carboxymethylcellulose (CMC), administered every other day, for a total of three applications. Alveolar bone loss was assessed 39 days after the last inoculation using histomorphometric measurement of buccal distance from the cemento-enamel junction to the alveolar bone crest (CEJ–ABC distance) and micro-computed tomography (μCT) at mesial and distal interdental sites. Bonferroni’s correction was applied to the Mann–Whitney U Test to determine statistical significance. A p-value of less than 0.05 was considered statistically significant. Results: Morphometric analysis showed significantly greater buccal bone loss in infected mice versus controls in both age groups (young: 0.193 mm vs. 0.100 mm, p < 0.01; old: 0.262 mm vs. 0.181 mm, p < 0.01). μCT analysis revealed that interdental bone loss was significant only in aged infected mice (mesial: 0.155 mm vs. 0.120 mm, p < 0.05; distal: 0.185 mm vs. 0.100 mm, p < 0.01), and not significant in young infected mice. Conclusions: Aging significantly exacerbates P. gingivalis-induced alveolar bone loss, particularly in interdental regions. These results allowed us to reject the null hypothesis. This study validates a clinically relevant murine model for analyzing age-related periodontitis and provides a foundation for investigating underlying molecular mechanisms and potential therapeutic interventions. Full article

The development and characterization of a sustainable carboxymethylcellulose (CMC)-based material hosting Egyptian blue (EB) as a luminophore with emission in both the visible and NIR regions is herein presented and discussed, demonstrating its potential to be applied in a variety of applications, such as bioimaging, sensing, and security marking. Solution casting was used to synthesize the films, with citric acid (CA) as a crosslinking agent. Fully characterization was performed using attenuated total reflection (ATR) and coherent anti-Stokes Raman scattering (CARS) spectroscopy, zeta potential, UV–Vis, and photoluminescence (PL) spectroscopy, and thermal analysis techniques, such as thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results confirm the effective crosslinking of CMC with CA within CMC–EB–CA films with 1.5 and 3% of EB. The introduction of EB retained its usual NIR emission with λ_em max = ~950 nm reaching quantum yield values in the range of 11.2–12.8% while also enabling a stable dispersion within the CMC matrix, as confirmed using CARS imaging and zeta potential. Additionally, the CMC films exhibited the characteristic clustering-triggered emission (CTE) in the blue region at 430 nm with a slight increase in luminescence quantum yield (Φ) from 5.8 to 6.1% after crosslinking with citric acid. Full article

Poor drug entrapment, burst release, and variable drug release profiles are the most critical challenges associated with biodegradable-polymer-based microspheres. In this study, biodegradable-polymer-based microspheres were used to entrap an antiplatelet drug, eptifibatide, using a single-emulsion solvent evaporation method. Critical challenges associated with biodegradable-polymer-based microspheres were addressed by incorporating different additives in the drug or polymer phase. Additives such as hydroxy propyl beta cyclodextrins (HPβCD), carboxy methyl cellulose sodium (Na CMC), and trehalose were added to the drug phase to evaluate their impact on the entrapment and stability of eptifibatide. The effect of the addition of additives such as polyvinyl alcohol (PVA), polyethylene glycol-400 (PEG-400), and methoxy polyethylene glycol phospholipid dimyristoyl phosphatidylethanolamine (mPEG-2000-DMPE, Na) to the polymer phase on the release profile of eptifibatide was evaluated. The inclusion of HPβCD resulted in good drug entrapment and helped control the initial unwanted burst release. Including Na CMC increased eptifibatide entrapment from 75% to 95%. Trehalose helped prevent the degradation of eptifibatide during lyophilization, and including PVA and PEG-400 reduced the lag phase and led to a controlled-release profile. Thus, including additives in the formulation can effectively improve the drug load and address issues associated with biodegradable-polymer-based microspheres. Full article

Novel carboxymethylcellulose (CMC) films with liquid products of pyrolysis (LPP) from wood pine were produced. The obtained CMC-LPP films were plasticized with 5% glycerol. CMC-LPP films were a light brown colour with a characteristic smoky scent, and showed a higher oxygen permeability when compared to control film without the addition of the LPP. CMC-LPP exhibited high antioxidant activity (5 and 18 times higher than CMC films). Furthermore, the antibacterial activity of the CMC-LPP films was tested, showing a strong inhibiting growth effect on the seven tested human pathogenic bacteria. The new material had the most substantial bacteriostatic effect on Listeria monocytogenes, Salmonella typhimurium, and Pseudomonas aeruginosa. Introduction of LPP to plasticised CMC produces an eco-friendly material with biocidal effect and favourable mechanical and structural properties, which shows its potential for possible use in many industries. Full article

Inoculating legumes with nitrogen-fixing bacteria, such as Bradyrhizobium, can significantly reduce reliance on synthetic nitrogen fertilizers. To optimize this process, a suitable rhizobial strain must be carefully selected and formulated. This study aimed to develop a biopolymer blend formulation for Bradyrhizobium pachyrhizi strain BR 3262. From four commercial starches and two carboxymethylcelluloses (CMC), we developed CMC/starch blends compatibilized or not with MgO at concentrations from 0.1% to 1.0% and subjected them to autoclaving for either 30 or 60 min. The resulting inoculants were stored for 168 days. Generally, blends compatibilized with 1.0% MgO exhibited a significant decrease in cell numbers, likely due to the observed pH values of approximately 10. The best performance was observed for CMC-I/starch B blends autoclaved for 60 min, and CMC-II/starch C blends autoclaved for 30 min, both compatibilized with 0.3% MgO. These blends maintained a cell viability of 10⁸ CFU mL⁻¹ for approximately 130 days at room temperature. Blend optimization depends on the selection of specific interactions and quantities of each component in order to achieve a given functionality; in the conditions of this study, the capacity to maintain Bradyrhizobium cell viability for at least four months. Full article

Essential oil-loaded edible films have emerged as promising natural systems for active food packaging due to their antimicrobial and antioxidant potential. However, retaining volatile bioactives within hydrophilic matrices remains challenging. In this regard, this study compared the performance of carboxymethylcellulose (CMC), citrus peel pectin (CPP), and potato starch (PS) edible films as encapsulating systems of orange (Citrus sinensis L. Osbeck) essential oil using Tween 80 as surfactant and glycerol as a plasticizer. Film-forming emulsions were characterized regarding droplet size distribution and rheological behavior. Films were analyzed by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Limonene retention was quantitatively determined post-drying through gas chromatography. CMC-based films exhibited the highest retention (~65%), primarily due to their higher viscosity, which limited oil droplet mobility and volatilization. Despite presenting similar internal porosity, PS films showed significantly lower retention (~53%), attributed to larger droplet size and lower viscosity. CPP films, with the smallest droplets and intermediate viscosity, showed similar limonene retention to PS-based films, highlighting that high internal porosity may compromise encapsulation efficacy. The results emphasize that matrix viscosity and emulsion stability are critical determinants of essential oil retention. Although polysaccharide films, particularly CMC, are promising carriers, further structural and processing optimizations are required to enhance their encapsulation performance for commercial applications. Full article

Cerebral organoids (cORGs) obtained from induced pluripotent stem cells (iPSCs) have become significant instruments for investigating human neurophysiology, with the possibility of simulating diseases and enhancing drug discovery. The current approaches require a strict process of manual inclusion in animal-derived matrix Matrigel^® and are challenged by unpredictability, operators’ skill and expertise, elevated costs, and restricted scalability, impeding their extensive applicability and translational potential. In this study, we present a novel method to generate brain organoids that address these limitations. Our approach does not require a manual, operator-dependent embedding. Instead, it employs a chemically defined hydrogel in which the Matrigel^® is diluted in a solution enriched with sodium alginate (SA) and sodium carboxymethylcellulose (CMC) and used as a bioink to print neural embryoid bodies (nEBs). Immunohistochemical, immunofluorescence, and gene expression analyses confirmed that SA-CMC-Matrigel^® hydrogel can sustain the generation of iPSC-derived cortical cORGs as the conventional Matrigel^®-based approach does. By day 40 of differentiation, hydrogel-based 3D-bioprinted cORGs showed heterogeneous and consistent masses, with a cytoarchitecture resembling an early-stage developmental fetal brain composed of neural progenitor cells PAX6⁺/Ki67⁺ organized into tubular structures, and densely packed cell somas with extensive neurites SYP⁺, suggestive of cortical tissue-like neuronal layer formation. Full article

Topical approaches to dermatophytosis have the advantage of targeted therapy and minimal side effects and are patient-friendly. The present study focused on obtaining thin, flexible, and transparent bioadhesive polymeric films loaded with terbinafine hydrochloride (TH), in order to be administered to the skin affected by fungal infection. Polymeric films based on pullulan (P), oxidized pullulan (T-OP), sodium carboxymethylcellulose (NaCMC), and glycerin were obtained by the casting and evaporation technique, and the solubility of the drug was significantly increased by micellar solubilization with Tween-80, thus avoiding the use of organic solvents. Physico-chemical characterization through the FTIR technique and EDX analysis indicates the absence of strong interactions between the drug and the polymer, and the loading efficiency highlights the uniform distribution of the drug. The mechanical properties, bioadhesion, contact angle, and water sorption capacity highlight optimal adhesion parameters on the skin. In vitro studies indicate a prolonged drug release, in the first 300 min, of 80% and 60% for F2_TH and F1_TH, respectively, and the release kinetics follow the Weibull model. Significant antifungal activity was obtained for both polymeric films. The biocompatibility of the ingredients, the gentle technique for obtaining the films, and the results obtained from their analysis represent promise for their applicability in topical antifungal treatment. Full article

Membranes made from biopolymers and loaded with doxycycline were investigated for potential use in the treatment of foot ulcers in diabetic patients. Carboxymethylcellulose (CMC) and chitosan (CHS) membranes were fabricated with 7% glycerol and 1% doxycycline (DOX). Their mechanical and physical properties, biocompatibility, and antimicrobial effects were thoroughly evaluated. The results demonstrated effective antibacterial activity against S. aureus and S. mutans. Based on the mechanical, physical, and hemolytic data, DOX-loaded CMC/CHS/G membranes show promise as a topical wound delivery system. Full article

Cement is widely used as an efficient binding agent in concrete; however, the production of cement is the second-largest source of carbon emissions. Therefore, there is an urgent need to explore alternative materials with similar properties. CoRncrete, a corn-based material, shows potential as an eco-friendly substitute. Our previous study showed that oven-dried CoRncrete achieved a maximum compressive strength of 18.9 MPa, which is 37% lower than traditional concrete. Nonetheless, in light of this limitation, CoRncrete still stands as a feasible choice for internal structural applications. This study aims to enhance CoRncrete’s strength by modifying drying conditions and incorporating lightweight thermoplastic polymers as admixtures. Air-drying for 7, 14, 21, and 28 days was tested, with durations of 21 days and greater showing improved internal curing, reduced porosity, and enhanced strength (23.9 MPa). Various high-strength, low-density polymers, including carboxy methyl cellulose (CMC), chitosan (CS), polyvinyl alcohol (PVA), and polyvinylpyrrolidone (PVP), were utilized. PVA demonstrated favorable interactions with cornstarch, also showing improved performance in water durability properties. Air-dried CoRncrete with PVA admixture had maximal water durability properties (up to 20 days) compared to the other samples. Micro-structural analysis revealed reduced porosity in air-dried and polymer-bound samples. Future investigations should extend to an in-depth study on air-drying duration for polymer-bound CoRn-crete and explore novel admixtures to further improve strength and water durability. Full article

Green bioprinting, from the context of merging 3D bioprinting with microalgae cell organization, holds promise for industrial-scale optimization. This study employs spectrophotometric analysis to explore post-bioprinting cell growth density variation within hybrid hydrogel biomaterial scaffolds. Three hydrogel biomaterials—Alginic acid sodium salt (ALGINATE), Nanofibrillated Cellulose (NFC)—TEMPO, and CarboxyMethyl Cellulose (CMC)—are chosen for their scaffolding capabilities. Bioink development and analysis of their impact on cell proliferation and morphology are conducted. Chlorella microalgae cell growth within hydrogel compositions is probed using absorbance measurements, with additional assessment of shear thinning properties. Notably, NFC exhibits reduced shear thinning compared to CMC. Results reveal that while mono-hydrogel substrates with pronounced adhesion inhibit Chlorella cell proliferation, alginate fosters increased cell concentration alongside a slight viscosity rise. Full article

The amorphization and crystallization of citric acid in the presence of a variety of polymers were investigated. Polymers were chosen for their different physicochemical features, including hygroscopicity, glass transition temperature (T_g), and functional groups capable of forming intermolecular non-covalent interactions with citric acid. Citric acid solutions with varying amounts of pectin (PEC), guar gum (GG), κ-carrageenan (KG), gelatin (GEL), (hydroxypropyl)methylcellulose (HPMC), and carboxymethylcellulose sodium (CMC-Na) were lyophilized. Dispersions were stored for up to 6 months in controlled temperature and relative humidity environments and periodically monitored using powder X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy. Moisture sorption isotherms and moisture contents were determined. Amorphous solid dispersions of citric acid were successfully formed in the presence of ≥20% w/w CMC-Na and PEC or ≥30% w/w of the other polymers except KG which required a minimum of 40% polymer. All samples remained amorphous even in their rubbery state at 0% RH (25 °C and 40 °C), but increasing the RH to 32% RH resulted in citric acid crystallization in the KG dispersions, and further increasing to 54% RH resulted in crystallization in all samples. Polymer effectiveness for inhibiting citric acid crystallization was CMC-Na > PEC ≥ GEL > HPMC > GG > KG. To create and maintain amorphous citric acid, polymer traits in order of effectiveness were as follows: greater propensity for intermolecular non-covalent interactions (both ionic and hydrogen bonding) with the citric acid, carbonyl groups, higher T_g, and then lower hygroscopicity. Full article

This study evaluated Maltodextrin (MD), Gum Arabic (GA), and Carboxymethylcellulose (CMC) in different ratios as coating materials to encapsulate citrus pomace phenolic compounds. Citrus encapsulates were obtained by ultrasound-assisted extraction followed by the freeze-drying process and were characterized regarding the microencapsulation efficiency, physical, and chemical properties. Carrier material choice reflected a significant effect on encapsulation efficiency, phenolic compounds retention, and reconstitution properties of encapsulated extract. The encapsulation efficiency of prepared encapsulates ranked from 50.909% to 84.000%, and it was strongly dependent upon CMC addition. A wide range of reconstitution parameters (water absorption index-WAI and water solubility index-WSI) suggested possible release mechanism modifications. HPLC analysis revealed the presence of three main phenolic compounds, namely Hesperidin, Naringin, and Rutin. A wall material mixture of MD, GA, and CMC in the same proportions was optimal for freeze-drying. This combination resulted in encapsulates with a low moisture content (1.936 ± 0.012%) and a low water activity (0.110 ± 0.001), indicating prolonged stability. Based on the obtained results, freeze-drying as an encapsulation technique should be considered as a promising solution to recover compounds from industry byproducts and protect them from environmental and gastrointestinal circumstances. Full article

Synthetic packaging is being replaced by biodegradable packaging through the revalorization of food industry by-products. The olive oil (OO) industry, known for producing large quantities of antioxidant-rich by-products, can be a major supplier for sustainable packaging materials. This study aims to valorize a food-grade by-product (defatted flour, DF) from OO extraction produced using a zero-waste strategy that combines expeller press technology and supercritical CO₂ extraction. DF and its aqueous extract (DFE) were combined with carboxymethylcellulose (CMC) to create biodegradable bioactive packaging films. DF contains a high content of insoluble dietary fiber (28.4%) and total phenolic compounds (35,000 ppm), including oleuropein, elenolic acid, hydroxytyrosol, and tyrosol (4324, 3603, 1525, and 157 ppm, respectively). This study examined the effects of DF and DFE on the physicochemical and barrier properties of the films, as well as their capacity to delay oxidation in polyunsaturated fatty acid-rich oil. Films with DF and DFE contained high phenolic content (1500 and 1200 ppm, respectively), and their inclusion improved ultraviolet visible barrier capacity. Additionally, oil oxidation was slower when protected by DF- and DFE-based films than when protected with CMC film alone. This allows their use as protective packaging and potential carriers of bioactive oils to enhance the nutritional and functional qualities of packaged foods. Full article