Search Results (10,889)

Konjac glucomannan (KG) is a biocompatible polysaccharide with limited functional performance in its native form, motivating modification strategies to enhance its properties. This study investigates the effect of gallic acid (GA) functionalization on the structural, physicochemical, mechanical, antioxidant, and biological properties of KG-based films. FTIR analysis confirmed that GA interacts with KG primarily through non-covalent hydrogen bonding without disrupting the polymer backbone. Modification with GA enabled concentration-dependent tuning of surface energy, roughness, hydration behavior, and water vapor permeability. Mechanical testing revealed a significant increase in stiffness and tensile strength accompanied by reduced elongation at higher GA contents. Antioxidant activity was markedly enhanced even at low GA concentrations. All films exhibited excellent hemocompatibility, while cytocompatibility toward human fibroblasts depended on GA content. Optical analysis indicated moderate color changes without severe discoloration. Overall, GA functionalization effectively improves the functional performance of KG films while preserving polymer integrity. Hence, GA-modified KG films as promising candidates for biomedical applications (like wound dressing) requiring antioxidant activity, controlled hydration, and biocompatibility. Full article

The research undertaken examines the impact of recycled tire steel fiber (RTSF) and waste aluminum (WAL) on the mechanical properties and freeze–thaw durability of sustainable fiber-reinforced concrete (FRC). RTSF (0.5%, 1.25%, and 2%) and WAL (10%) were added on their own and as hybrids. Findings revealed that 1.25% RTSF was the optimum content to use, as it enhanced compressive strength by 12.8% with high durability. Tensile and flexural strengths also increased for higher fiber contents with the help of good crack bridging and increased post-crack ductility; maximal gains of 52.6% and 11.8% were obtained at 2% RTSF. In contrast, the increase in porosity and the decrease in strength were demonstrated with WAL, whereas hybrid mixes delivered a balanced performance. Microstructural analysis ensured that there was an enhanced bonding between the fibers and the matrix, coupled with a refinement in the pore at the optimal fiber content. This study establishes the structural viability, durability improvement, and sustainability prospect of hybrid recycled material concrete as a construction material with eco-efficient and resilient applications. Full article

This comparative study investigates binder-free binary WC-TiC and ternary WC-TiC-TaC carbide ceramics as alternatives to cobalt-bonded hard materials. Equimolar compositions were processed via high-energy ball milling (HEBM) and consolidated by spark plasma sintering (SPS) at 1700–2100 °C. X-ray diffraction analysis (XRD) revealed fundamentally different homogenization kinetics: the ternary system achieved a complete single-phase structure at 2000 °C, 100 °C earlier than the binary system. This acceleration correlates with finer initial particle size (2–5 μm vs. 3–10 μm) and near-stoichiometric TaC, facilitating interdiffusion. Lattice parameter evolution confirmed the formation of (W,Ti)C and (W,Ti,Ta)C substitutional solid solutions. Mechanical characterization showed contrasting behaviors: binary WC-TiC exhibits maximum hardness at 1900 °C (1793 HV30, fracture toughness 5.07 MPa·m^1/2), while ternary WC-TiC-TaC peaks at 1700–1800 °C (1947–1782 HV30) with higher toughness (max 5.42 MPa·m^1/2). Optimal processing windows with acceptable property uniformity are 1800–1900 °C (binary) and 1700–1900 °C (ternary). The binary system offers superior toughness and stability; the ternary system enables faster processing and higher initial hardness, defining distinct application domains. Full article

Polysaccharides are natural polymers that are widely found in medicinal plants. Structurally, they are complex molecules composed of long chains of monosaccharide units linked by glycosidic bonds. Modern pharmacological research shows that the bioactivity of polysaccharides is closely related to their monosaccharide composition. This review summarises the monosaccharide composition of 210 polysaccharides from 72 medicinal plants. They were classified into 10 types through principal component analysis (glucans; homogalacturonan; galactans; arabinogalactans; mannans; glucomannans; arabinans; xylans; fructans; rhamnogalacturonan-I). The relationship between monosaccharide composition and biological activity was further analysed. The results are as follows: glucans make significant contributions to immunomodulation, antioxidant activity, and gut microbiota regulation; galactans are crucial for antioxidant effects, immunomodulation, and gut microbiota regulation; mannans play a key role in immunomodulation, antitumor activity, and neuroprotection; fructans are vital for gut microbiota regulation, immunomodulation, and antioxidant effects; and pectins exhibit notable immunomodulatory, antioxidant, and hypoglycaemic properties. Consequently, developing polysaccharides from medicinal plant resources based on their monosaccharide composition is expected to speed up the search for polysaccharides with high biological activity and provide a theoretical reference for polysaccharide research. Full article

3D printing represents a promising fabrication technology for silica-based ceramic cores, which are essential components in the casting of turbine blades, but it is faced with poor high-temperature dimensional stability. Herein, alumina nanopowder was utilized as a modifier agent in digital light processing (DLP) 3D printing of silica-based ceramic cores, and systematic investigations were conducted on the microstructure and properties of ceramic cores throughout sintering and casting dependent on the content of alumina nanopowder (0–1.0 wt.%). Alumina nanopowder increased the sintering barrier of fused silica, significantly reducing the shrinkage in sintering and simulated casting, while improving high-temperature dimensional stability. Even though the alumina nanopowder led to decreased room-temperature and high-temperature flexural strengths attributed to inhibited densification and crystallization, the strengths met investment casting requirements after PVA solution strengthening. Excessive alumina nanopowder (0.8–1.0 wt.%) resulted in poor interlayer bonding and particle spalling, unfavorable to the structural integrity in casting. The optimal alumina content was 0.6 wt.%, which balanced sintering shrinkage of 1.86%, shrinkage of 4.41% after simulated casting, room-temperature flexural strength of 11.13 MPa, high-temperature flexural strength of 31.29 MPa, high-temperature creep deformation of 0.55 mm, and surface roughness of 1.815 μm. This research proposes an effective strategy for the optimization of 3D-printed silica-based ceramic cores in the manufacture of complex hollow turbine blades. Full article

In this study, a multicomponent composite film system based on alginate, chitosan, κ-carrageenan, agar, and Rapana venosa protein hydrolysate (RVPH) was developed, and the effect of RVPH incorporation (0–1.5%) on molecular interactions, microstructure, and functional performance was evaluated using FTIR, SEM, mechanical testing, optical analysis, and water-related measurements. FTIR results indicated that RVPH interacted with the polysaccharide matrix mainly through hydrogen bonding and ionic interactions without causing chemical degradation. SEM analysis revealed concentration-dependent microstructural changes, with smoother morphologies at low RVPH levels and increased roughness and heterogeneity at higher concentrations. These structural differences were reflected in the functional properties. All films exhibited high swelling and water solubility. Optical properties were significantly affected by RVPH. Mechanical properties exhibited a non-linear response, with numerical variations observed but no statistically significant differences (p > 0.05). The EDAS and SWARA methods were employed to determine the optimal incorporation level of RVPH in the film formulations. Among the RVPH-containing films, the formulation incorporating 1% RVPH was identified as the most suitable alternative. Full article

To mitigate the issue of brittleness and cracking in epoxy resin (EP) anti-skid systems, this study investigates four key aspects tailored to application scenarios: toughening, low shrinkage, strong adhesion, and rapid curing at ambient temperature. 1,4-Butanediol diglycidyl ether (BDDE) was used to extend the chain of triethylenetetramine (TETA), followed by a Mannich reaction with formaldehyde (F) and cardanol to prepare a flexible aliphatic amine Mannich base curing agent containing flexible segments (Curing Agent B). The influence of composition ratios on the mechanical properties of the cured product was studied. The curing performance of the epoxy system under various temperature conditions and its adhesion to asphalt substrates were characterized. The thermal shrinkage behavior of the epoxy system under temperature-variable environments was also investigated. The results indicated that the elongation at break of the epoxy curing system, after chain extension and toughening, increased from 28.7% to 40.4%, representing a 28.9% increase. When n (Cardanol):n (TETA):n (F):n (BDDE) = 1:1.4:0.8:0.7 (molar ratio of reactants), m (EP):m (Curing Agent B) = 1:1 (mass ratio), and epoxy-terminated polyurethane (EPU) prepolymer constituted 10% of the epoxy resin mass; the epoxy curing system exhibited an elongation at break of 44.3%, a tensile strength of 7.0 MPa, a bond strength of 6.9 MPa, and an impact toughness of 1.77 J/cm². Furthermore, it exhibited rapid curing at a low temperature (0~5 °C) and at room temperature (25 °C). Additionally, when bisphenol F epoxy resin was used, the system demonstrated optimal thermal expansion properties. Full article

To investigate the deterioration law of the mechanical properties of PVA-fiber-reinforced rubber concrete under the combined action of high-temperature and salt erosion, physical index tests, dynamic mechanical property experiments, and microstructural morphology observations were carried out on specimens subjected to different temperatures (ambient temperature, 100 °C, 300 °C) and various solution attacks (water, 5% NaCl, 5% Na₂SO₄, and 5% NaCl + 5% Na₂SO₄ mixture). The results show that, after exposure to 300 °C, the PVA fibers melt and the rubber pyrolyzes, since this temperature exceeds their melting points. A residual pore network is formed inside the matrix, and the damage degree of ultrasonic pulse velocity is about 2.3 times that of the 100 °C group. Although salt solution and its crystallization products can physically fill the pores and cause a partial recovery of pulse velocity, this change is mainly due to the alteration of the pore medium and does not represent a substantial restoration of the microstructure. The effects of different salt solutions on dynamic mechanical properties vary significantly: Sulfate erosion improves the dynamic performance significantly at ambient temperature by forming gypsum and ettringite to fill pores, but this strengthening effect disappears after 300 °C. Sodium chloride attack generates Friedel’s salt and consumes C₃A, leading to general strength deterioration. In composite salt erosion, the competitive and synergistic effects of Cl⁻ and SO₄²⁻ destabilize erosion products and weaken interfacial bonding, resulting in consistent decreases in dynamic compressive strength and elastic modulus under all temperatures and impact pressures. The strength reduction reaches 66.2% after 300 °C. Microscopic analysis confirms that composite salt erosion leads to the dissolution of ettringite and loose structure, which verifies the synergistic deterioration law of macroscopic properties. This study systematically reveals the damage evolution mechanism of PVA-fiber-reinforced rubber concrete under the coupled action of high-temperature and salt erosion, and provides a theoretical basis for the dynamic bearing capacity evaluation and durability design of concrete structures in such coupled environments. Full article

Based on density functional theory, the structural, mechanical, and photoelectric properties of the perovskite material Cs₂SeCl₆ were systematically studied under pressures ranging from 0 to 50 GPa. Analysis of structural parameters indicates that the lattice constant, unit cell volume, and bond length decrease progressively with increasing pressure. Notably, the material maintains structural stability across the entire pressure range. Electronic property calculations show that Cs₂SeCl₆ retains an indirect band gap under pressure, with the band gap value monotonically decreasing as pressure increases. The orbital contributions remain almost unchanged at different pressures. The conduction band is mainly composed of Cl-p and Se-p orbitals, while the valence band is dominated by Cl-p orbitals. The analysis of the effective mass indicates that the transport capability of charge carriers is enhanced under compression. Mechanical stability and ductility were evaluated by calculating the elastic constants and derived mechanical moduli, confirming that the material remains mechanically stable under high pressure. Optical properties were investigated by computing the dielectric function, reflectivity, refractive index, optical absorption coefficient, and extinction coefficient. Collectively, the findings of this work demonstrate that the pressurized Cs₂SeCl₆ exhibits excellent structural robustness, improved charge transport, and promising photoelectric performance, making it a strong candidate for applications in solar cells and other photoelectronic devices. Full article

Nitronyl nitroxides (NNs) are widely employed in chemistry, physics, and materials science due to their inherently high stability and magnetic properties. However, the synthesis of C(2)-organoelement derivatives remains a challenging task. This paper reports on the efficient synthesis and characterization of an unusual organosilver complex consisting of the [Ag–(IPr)₂]⁺ cation and the [Ag–(NN)₂]⁻ anion. The salt [Ag–(IPr)₂][Ag–(NN)₂] was prepared in high yields (88–96%) by two synthetic routes: by reacting the carbene ligand precursor IPr·HCl with Ag₂O and nitronyl nitroxide NN–H, or by addition of NN–H/^tBuONa to a THF solution of IPrAgCl (generated in situ from IPr·HCl and Ag₂O) under microwave irradiation. Electrochemical analysis of [Ag–(IPr)₂][Ag–(NN)₂] revealed a reversible one-electron oxidation peak at E_1/2 = −0.258 V and an irreversible reduction peak at E_p = −2.169 V, which is likely related to the electrochemical transformation of the nitronyl nitroxide moieties. Crystallization from an acetone/benzene solution yielded crystals of [Ag–(IPr)₂][Ag–(NN)₂]·2H₂O solvate, in which the diradical anion [Ag–(NN)₂]⁻ is bound to two water molecules by hydrogen bonds. These hydrogen bonds stabilize a planar conformation of the [Ag–(NN)₂]⁻ anion, in which both NN fragments lie in the same plane and, according to DFT calculations, are linked by fairly strong antiferromagnetic interaction. DFT calculations also predict the dissociation of the complex with water in toluene solution and a conformational change leading to the appearance of about 90° between NN fragments and a significant decrease in exchange interaction. Full article

Titanium dioxide (TiO₂) is a versatile material that exhibits a high refractive index, strong light-scattering capability, effective UV-absorption, wide band gap semiconductor behavior (3.0–3.2 eV), and excellent chemical stability. Owing to this unique combination of properties, TiO₂ is widely used in applications such as cosmetic and healthcare products, architectural and automotive coatings, and photocatalytic degradation of environmental pollutants. In photocatalytic applications, the crystal structure, phase composition and electronic properties of TiO₂ play a critical role in determining its performance. In the present study, TiO₂ nanotubes were synthesized by anodization of Ti° coatings deposited via a semi-industrial arc-PVD process. A post-anodization heat treatment was carried out at 430 °C for 1 h to promote the formation of the anatase phase within the TiO₂ nanotube structures. The structural characterization of the synthesized film was performed using X-ray diffraction (XRD) and Rietveld refinement. This methodology enabled the identification of the formed oxide phases, structure, and crystalline, confirming the formation of mixed oxides in the coating. To address the difficulty of refinement of these crystalline phases, the Le Bail method was applied. This refinement strategy allowed the identification of the crystalline phases that are present in the Ti_xO_y coating, including a hexagonal structure characteristic of α-Ti (space group P63/mmc, No. 194), the tetragonal anatase TiO₂ (space group I41/amd, No. 141) phase, and the trigonal Ti₂O₃ phase (space group R-3/c No. 167). Key crystallographic parameters such as lattice constants, bond lengths and angles, crystallite sizes, unit cell distortion and electron density were systematically evaluated for each phase. In addition, the Wyckoff positions and interatomic distances of the constitutive atoms were calculated, providing a comprehensive description of the TiO₂+Ti₂O₃/Ti° crystallographic system. The topographic and surface oxidation states were recorded by using profilometry and X-ray photoelectron spectroscopy, respectively. Full article

Groundwater fluctuations in bedrock affect the mechanical behavior of rock masses hosting geo-energy recovery systems utilizing borehole heat exchangers. To investigate the combined influencing mechanism of changes in groundwater saturation and fracture dip angle on mechanical properties of typical fractured rock masses, triaxial compressive tests were conducted using specimens containing fissures at different angles (15° and 75°) under three conditions: conventional dry, water-immersed, and immersed-dried. The results reveal a combined influencing mechanism of groundwater saturation and fracture dip angle on mechanical properties of typical fractured rock mass. Since specimens with gentle fissure angles tend to fail through fracturing of the intact rock, while those with steeper fissure angles are more prone to failure via slippage along fissure planes, the stress–strain response exhibits greater variability among samples with gentle fissures, attributable to the material heterogeneity of the rock matrix; an increase in water saturation reduces the strength of steeper fissures more pronouncedly due to the relatively homogeneous properties of these fissures, and gravitational water present along fissure planes reduces effective stress and weakens interfacial bonding. Therefore, rock masses with steeper fissures are more susceptible to water-induced weakening and pose a higher risk of shear slippage by fissure reactivation. The findings have a practical value in offering theoretical support for assessing stability risks in geo-energy structures in shallow bedrocks. Full article

The present study investigates simple cubic lattice structures fabricated through an FDM-based three-dimensional (3D) printing method using wood–polylactic acid (wood–PLA) bio-composite filament and develops a data-driven framework to predict their mechanical response. The design of experiments (DOE) was developed using a response surface methodology (RSM) based on a central composite design (CCD) that was implemented in Design-Expert software (Version 13). During fabrication, four different manufacturing parameters—the layer height, the printing speed, the nozzle temperature, and the infill density—were considered. The compressive strength and compressive modulus were evaluated experimentally, and the corresponding stress–strain responses were examined. The results reveal that the layer height is the most influential parameter, where lower layer heights (0.06–0.1 mm) significantly improve both the compressive strength and the modulus due to enhanced interlayer bonding and reduced void formation. The printing speed and the nozzle temperature also play critical roles, where lower printing speeds (≈40 mm/s) and moderate nozzle temperatures (≈195–205 °C) promote more uniform material deposition and improved interlayer bonding, while higher speeds (≥60 mm/s) and excessive temperatures (≈225 °C) lead to reduced bonding quality and a deterioration in mechanical performance. In contrast, the infill density exhibited a non-monotonic influence, where intermediate levels (around 70%) provided an improved performance under combinations of the low layer height (≈0.1 mm), the low printing speed (≈40 mm/s), and the moderate nozzle temperature (≈195–215 °C), suggesting an interaction-driven effect rather than a purely density-dependent trend. To complement the experimental findings, a machine learning model based on eXtreme Gradient Boosting (XGBoost) was developed using 12,000 data points that were derived from stress–strain curves. The model successfully predicted continuous mechanical responses with errors in the range of 2–8% for unseen specimens, suggesting its capability to capture the relationship between printing parameters and mechanical behavior within the studied design space. Overall, the study highlights that the mechanical properties of wood–PLA lattice structures can be effectively tailored by choosing an appropriate printing parameter control and demonstrates the feasibility of using machine learning to estimate mechanical performance without additional physical testing within the defined parameter domain. Full article

This study investigates the effects of organic salts, including sodium citrate (SC), calcium citrate (CC), and calcium lactate (CL), on the structure–property–function relationships of thermoplastic starch/poly(butylene adipate-co-terephthalate) (TPS/PBAT) films for active packaging applications. TPS incorporated with organic salts was prepared via twin-screw extrusion, blended with PBAT, and further processed into blown films. The films were systematically characterized using ¹H NMR, FTIR, and SEM, together with optical, mechanical, water vapor permeability, and antimicrobial evaluations against Staphylococcus aureus. The results revealed that SC primarily modulated hydrogen-bonding interactions within the starch matrix, resulting in improved structural homogeneity, balanced mechanical properties, and the highest antimicrobial activity among all formulations. In contrast, CL and CC promoted ionic crosslinking through Ca²⁺–starch interactions, leading to increased stiffness and Young’s modulus but reduced polymer chain mobility and limited release of active species, particularly in CC-containing systems. These differences in molecular interactions were consistent with variations in film microstructure, where SC-containing films exhibited more uniform morphologies, while calcium-based systems showed denser but less permeable structures. Furthermore, films containing SC and CL at appropriate concentrations achieved a favorable balance between transparency, water vapor barrier properties, and antimicrobial performance. Overall, this study provides new mechanistic insights into how monovalent and divalent organic salts govern intermolecular interactions, microstructure, and functional performance in TPS/PBAT systems. The findings highlight the critical role of additive type and concentration in designing biodegradable active packaging materials with tunable mechanical, barrier, and antimicrobial properties. Full article

While recent research has extensively investigated the feasibility of incorporating various agricultural by-products as aggregate replacements in concrete, the specific potential of crushed date kernel (CDK) remains insufficiently characterized despite their abundance. This study evaluates the performance of concrete incorporating CDK as a partial replacement for fine aggregates at volumetric ratios ranging from 5% to 30%. The experimental program was oriented to find the major properties of the mixes, such as compressive strength, splitting tensile strength, flexural strength, and bonding, in addition to the Ultrasonic Pulse Velocity, water absorption, density, and thermal conductivity. The compressive strength of the standard mixture was 26.73 MPa, the flexural strength was 4.47 MPa, and the thermal conductivity was 1.99 W/m·K after 28 days. A compressive strength of 26.78 MPa was recorded for a 5% substitution, but the flexural strength of 4.85 MPa was greater, along with a reduction in the thermal conductivity of 1.86 W/m·K. Higher replacement ratios led to a gradual loss of mechanical strength, whereas 30% replacement gave a corresponding stress of 19.65 MPa. However, thermal conductivity continued to decrease to a value of 1.27 W/m·K, indicating a better insulation capacity. Furthermore, the TOPSIS multi-criteria decision-making analysis demonstrated a robust classification across multiple weighting combinations. The analysis identified the 5% replacement ratio as the optimum for operating and the 10% replacement as optimum on a sustainability basis. Full article