Search Results (14)

Recent advances in electrochemiluminescence (ECL) leveraging thermally activated delayed fluorescence (TADF) have highlighted its potential for near-unity exciton harvesting. However, there are still very limited examples of TADF-ECL emitters. We present a rigid diboron-embedded multiple-resonance TADF emitter, which exhibits blue–green emission at 493 nm with a remarkably narrow bandwidth (FWHM = 22 nm) and minimized singlet-triplet energy gap (ΔE_ST = 0.2 eV), achieving a 67% photoluminescence quantum yield. DFT calculations confirm the short-range charge transfer, enabling narrowband emission. Co-reactant-dependent ECL shows that tripropylamine (TPrA) improves the ECL efficiency from 11% (annihilation) to 51%, while benzoyl peroxide (BPO) yields 1% due to poor radical stabilization. ECL spectra align with photoluminescence, confirming the singlet-state dominance without exciplex interference. TPrA enhances stable radical formation and energy transfer, whereas BPO induces non-radiative losses. These findings establish molecular rigidity and co-reactant selection as pivotal factors in developing high-performance TADF-ECL systems, providing fundamental guidelines for designing organic electrochemiluminescent materials with optimized exciton harvesting efficiency. Full article

Organic light-emitting diodes (OLEDs) have emerged as one of the dominant technologies in displays due to their high emission efficiency and low power consumption. However, the development of blue color emitters has fallen behind that of red and green emitters, posing challenges in achieving optimal efficiency, stability, and accessibility. In this context, thermally activated delayed fluorescence (TADF) emitters hold promise as a potential solution for cost-effective, exceptionally efficient, and stable blue OLEDs due to their potential high efficiency and stability. TADF is a principle where certain organic materials can efficiently convert both singlet and triplet excitons, theoretically achieving up to 100% internal quantum efficiency. This research focused on diphenyl sulfone derivatives with carbazole groups as TADF compounds. Quantum chemical calculations and photoluminescence properties show the potential TADF properties of the molecules. New materials exhibit glass transition temperatures that would classify them as molecular glasses. Depending on the structure of the molecule, the photoluminescence emission is in the blue or green spectral region. Organic light-emitting diodes were fabricated from neat thin films of emitters by the wet casting method. The best performance in the deep blue emission region was achieved by a device with a turn-on voltage of 4 V and a maximum brightness of 178 cd/m². In the blue-green emission region, the best performance was observed by an OLED with a turn-on voltage of 3.5 V, reaching a maximum brightness of 660 cd/m². Full article

Over the past few decades, organic light-emitting diodes (OLEDs) find applications in smartphones, televisions, and the automotive sector. However, this technology is still not perfect, and its application for lighting purposes has been slow. For further development of the OLEDs, we designed twisted donor-acceptor-type electroactive bipolar derivatives using benzophenone and bicarbazole as building blocks. Derivatives were synthesized through the reaction of 4-fluorobenzophenone with various mono-alkylated 3,3′-bicarbazoles. We have provided a comprehensive structural characterization of these compounds. The new materials are amorphous and exhibit suitable glass transition temperatures ranging from 57 to 102 °C. They also demonstrate high thermal stability, with decomposition temperatures reaching 400 °C. The developed compounds exhibit elevated photoluminescence quantum yields (PLQY) of up to 75.5% and favourable HOMO-LUMO levels, along with suitable triplet-singlet state energy values. Due to their good solubility and suitable film-forming properties, all the compounds were evaluated as blue TADF emitters dispersed in commercial 4,4′-bis(N-carbazolyl)-1,10-biphenyl (CBP) host material and used for the formation of emissive layer of organic light-emitting diodes (OLEDs) in concentration-dependent experiments. Out of these experiments, the OLED with 15 wt% of the emitting derivative 4-(9′-{2-ethylhexyl}-[3,3′]-bicarbazol-9-yl)benzophenone exhibited superior performance. It attained a maximum brightness of 3581 cd/m², a current efficacy of 5.7 cd/A, a power efficacy of 4.1 lm/W, and an external quantum efficacy of 2.7%. Full article

The development of efficient deep-blue emitters with thermally activated delayed fluorescence (TADF) properties is a highly significant but challenging task in the field of organic light-emitting diode (OLED) applications. Herein, we report the design and synthesis of two new 4,10-dimethyl-6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine (TB)-derived TADF emitters, TB-BP-DMAC and TB-DMAC, which feature distinct benzophenone (BP)-derived acceptors but share the same dimethylacridin (DMAC) donors. Our comparative study reveals that the amide acceptor in TB-DMAC exhibits a significantly weaker electron-withdrawing ability in comparison to that of the typical benzophenone acceptor employed in TB-BP-DMAC. This disparity not only causes a noticeable blue shift in the emission from green to deep blue but also enhances the emission efficiency and the reverse intersystem crossing (RISC) process. As a result, TB-DMAC emits efficient deep-blue delay fluorescence with a photoluminescence quantum yield (PLQY) of 50.4% and a short lifetime of 2.28 μs in doped film. The doped and non-doped OLEDs based on TB-DMAC display efficient deep-blue electroluminescence with spectral peaks at 449 and 453 nm and maximum external quantum efficiencies (EQEs) of 6.1% and 5.7%, respectively. These findings indicate that substituted amide acceptors are a viable option for the design of high-performance deep-blue TADF materials. Full article

Organic light-emitting diodes (OLEDs) have played a vital role in showing tremendous technological advancements for a better lifestyle, due to their display and lighting technologies in smartphones, tablets, television, and automotive industries. Undoubtedly, OLED is a mainstream technology and, inspired by its advancements, we have designed and synthesized the bicarbazole-benzophenone-based twisted donor–acceptor–donor (D-A-D) derivatives, namely DB13, DB24, DB34, and DB43, as bi-functional materials. These materials possess high decomposition temperatures (>360 °C) and glass transition temperatures (~125 °C), a high photoluminescence quantum yield (>60%), wide bandgap (>3.2 eV), and short decay time. Owing to their properties, the materials were utilized as blue emitters as well as host materials for deep-blue and green OLEDs, respectively. In terms of the blue OLEDs, the emitter DB13-based device outperformed others by showing a maximum EQE of 4.0%, which is close to the theoretical limit of fluorescent materials for a deep-blue emission (CIE_y = 0.09). The same material also displayed a maximum power efficacy of 45 lm/W as a host material doped with a phosphorescent emitter Ir(ppy)₃. Furthermore, the materials were also utilized as hosts with a TADF green emitter (4CzIPN) and the device based on DB34 displayed a maximum EQE of 11%, which may be attributed to the high quantum yield (69%) of the host DB34. Therefore, the bi-functional materials that are easily synthesized, economical, and possess excellent characteristics are expected to be useful in various cost-effective and high-performance OLED applications, especially in displays. Full article

Thermally activated delayed fluorescence (TADF) materials, which can harvest all excitons and emit light without the use of noble metals, are an appealing class of functional materials emerging as next-generation organic electroluminescent materials. Triplet excitons can be upconverted to the singlet state with the aid of ambient thermal energy under the reverse inter-system crossing owing to the small singlet–triplet splitting energy (ΔE_ST). This results from a specific molecular design consisting of minimal overlap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital, due to the spatial separation of the electron-donating and electron-releasing part. When a well-designed device structure is applied, high-performance blue-emitting TADF organic light-emitting diodes can be realized with an appropriate molecular design. Unlike the previous literature that has reviewed general blue-emitting TADF materials, in this paper, we focus on materials other than pure organic molecules with twist D-π-A structures, including multi-resonance TADF, through-space charge transfer TADF, and metal-TADF materials. Cutting-edge molecules with extremely small and even negative ΔE_ST values are also introduced as candidates for next-generation TADF materials. In addition, OLED structures used to exploit the merits of the abovementioned TADF emitters are also described in this review. Full article

The employment of thermally activated delayed fluorescence (TADF) emitters is one of the most promising ways to realize the external quantum efficiency (EQE) of over 25% for organic light-emitting diodes (OLEDs). In addition, the TADF emitter based on oxygen-bridged boron (BO) fragment can maintain blue emission with high color purity. Herein, we constructed two blue TADF emitters, 3TBO and 5TBO, for OLEDs application. Both emitters consist of three donors linked at the oxygen-bridged boron acceptor. OLED devices based on 3TBO and 5TBO exhibited both high excellent device efficiency and high color purity with a maximum EQE; full-width at half-maximum (FWHM); and CIE coordinates of 17.3%, 47 nm, (0.120, 0.294), and 26.2%, 57 nm, (0.125, 0.275), respectively. Full article

Multi-resonance thermal activated delayed fluorescence (MR-TADF) has been promising with large oscillator strength and narrow full width at half maxima of luminescence, overcoming the compromise of emission intensity and energy criteria of traditional charge transfer TADF frameworks. However, there are still limited theoretical investigations on the excitation mechanism and systematic molecular manipulation of MR-TADF structures. We systematically study the highly localized excitation (LE) characteristics based on typical blue boron-nitrogen (BN) MR-TADF emitters and prove the potential triangular core with theoretical approaches. A design strategy by extending the planar π-conjugate core structure is proposed to enhance the multiple resonance effects. Moreover, several substituted groups are introduced to the designed core, achieving color-tunable functions with relatively small energy split and strong oscillator strength simultaneously. This work provides a theoretical direction for molecular design strategy and a series of potential candidates for highly efficient BN MR-TADF emitters. Full article

We report an efficient deep-blue organic light-emitting diode (OLED) based on a heptazine-based thermally activated delayed fluorescent (TADF) emitter, 2,5,8-tris(diphenylamine)-tri-s-triazine (HAP-3DPA). The deep-blue-emitting compound, HAP-3DPA, was designed and synthesized by combining the relatively rigid electron-accepting heptazine core with three electron-donating diphenylamine units. Due to the rigid molecular structure and intramolecular charge transfer characteristics, HAP-3DPA in solid state presented a high photoluminescence quantum yield of 67.0% and obvious TADF nature with a short delayed fluorescent lifetime of 1.1 μs. Most importantly, an OLED incorporating HAP-3DPA exhibited deep-blue emission with Commission Internationale de l’Eclairage (CIE) coordinates of (0.16, 0.13), a peak luminance of 10,523 cd/m⁻², and a rather high external quantum efficiency of 12.5% without any light out-coupling enhancement. This finding not only reports an efficient deep-blue TADF molecule, but also presents a feasible pathway to construct high-performance deep-blue emitters and devices based on the heptazine skeleton. Full article

The short material lifetime of thermally activated delayed fluorescence (TADF) technology is a major obstacle to the development of economically feasible, highly efficient, and durable devices for commercial applications. TADF devices are also hampered by insufficient operational stability. In this paper, we report the design, synthesis, and evaluation of new TADF molecules possessing a sterically twisted skeleton by interlocking donor and acceptor moieties through a C–C bond. Compared to C–N-bond TADF molecules, such as CPT2, the C–C-bond TADF molecules showed a large dihedral angle increase by more than 30 times and a singlet–triplet energy-gap decrease to less than 0.22 eV because of the steric hindrance caused by the direct C–C bond connection. With the introduction of a dibenzofuran core structure, devices comprising BMK-T317 and BMK-T318 exhibited a magnificent display performance, especially their external quantum efficiencies, which were as high as 19.9% and 18.8%, respectively. Moreover, the efficiency roll-off of BMK-T318 improved significantly (26.7%). These results indicate that stability of the material can be expected through the reduction of their singlet–triplet splitting and the precise adjustment of dihedral angles between the donor–acceptor skeletons. Full article

To achieve significant efficiency and low roll-off in thermally activated delayed fluorescence (TADF) material organic light-emitting diodes (OLEDs), it is essential to choose a host that has suitable high triplet energy (T₁) and bipolar character to boost the TADF characteristics as a dopant and avoid exciton annihilation. Herein, we present the effect of different host materials on the efficiency of organic light-emitting diodes (OLEDs) based on bis[4-(3,6 dimethoxycarbazole)phenyl]sulfone (DMOC-DPS) deep-blue emitter. The devices with 10 wt.% of an emitter in different electron types of host bis[2-(diphenylphosphino) phenyl] ether oxide (DPEPO), and hole types of host 1,3-bis(N-carbazolyl)benzene (mCP), were fabricated to study the effect on device performance. The results show that an external quantum efficiency (EQE) of 4% and maximum current efficiency (ƞ_c) up to 5.77 cd/A with high luminescence (l_max) 8185 cd/m² in DPEPO was achieved, compared to 2.63% EQE, ƞ_c 4.12 cd/A with l_max 5338 cd/m² in mCP in a very simple device structure. As a remarkable result, the roll-off is suppressed at 1000 cd/m², and for maximum brightness, the roll-off is less than 50%. Further general applications are discussed. Full article

High-efficiency thermally activated delayed fluorescence (TADF) is leading the third-generation technology of organic light-emitting diodes (OLEDs). TADF emitters are designed and synthesized using inexpensive organic donor and acceptor derivatives. TADF emitters are a potential candidate for next-generation display technology when compared with metal-complex-based phosphorescent dopants. Many studies are being conducted to enhance the external quantum efficiencies (EQEs) and photoluminescent quantum yield of green TADF devices. Blue TADF reached an EQE of over 35% with the support of suitable donor and acceptor moieties based on a suitable molecular design. The efficiencies of green TADF emitters can be improved when an appropriate molecular design is applied with an efficient device structure. The triazine acceptor has been identified as a worthy building block for green TADF emitters. Hence, we present here a review of triazine with various donor molecules and their device performances. This will help to design more suitable and efficient green TADF emitters for OLEDs. Full article

Organic light-emitting diodes offer attractive perspectives for the next generation display and lighting technologies. The potential is huge and the list of potential applications is almost endless. So far, blue emitters still suffer from noticeably inferior electroluminescence performances in terms of efficiency, lifespan, color quality, and charge injection/transport when compared to that of the other colors. Emitting materials matching the NTSC standard blue of coordinates (0.14, 0.08) are extremely rare and still constitutes the focus of numerous academic and industrial researches. In this context, we review herein the recent developments on highly emissive deep-blue thermally activated delayed fluorescence emitters that constitute the third-generation electroluminescent materials. Full article

Recently, thermally activated delayed fluorescence (TADF) organic light-emitting diodes (OLEDs) have attracted both academic and industrial interest due to their extraordinary characteristics, such as high efficiency, low driving voltage, bright luminance, lower power consumption and potentially long lifetime. In this invited review, the fundamental concepts of TADF have been firstly introduced. Then, main approaches to realize WOLEDs based on TADF have been summarized. More specifically, the recent development of WOLEDs based on all TADF emitters, WOLEDs based on TADF and conventional fluorescence emitters, hybrid WOLEDs based on blue TADF and phosphorescence emitters and WOLEDs based on TADF exciplex host and phosphorescence dopants is highlighted. In particular, design strategies, device structures, working mechanisms and electroluminescent processes of the representative WOLEDs based on TADF are reviewed. Finally, challenges and opportunities for further enhancement of the performance of WOLEDs based on TADF are presented. Full article