Search Results (41)

Unmanned underwater vehicles (UUVs) capable of agile, high-speed maneuvering in complex environments require propulsion systems that can dynamically modulate three-dimensional forces. The California sea lion (Zalophus californianus) provides an exceptional biological model, using its foreflippers to achieve rapid turns and powerful propulsion. However, the specific kinematic mechanisms that govern instantaneous force generation from its powerful foreflippers remain poorly quantified. This study experimentally characterizes the time-varying thrust and lift produced by a bio-robotic sea lion foreflipper to determine how flipper twist, sweep, and phase overlap modulate propulsive forces. A three-degree-of-freedom bio-robotic flipper with a simplified, low-aspect-ratio planform and single compliant hinge was tested in a circulating flow tank, executing parameterized power and paddle strokes in both isolated and combined-phase trials. The time-resolved force data reveal that the propulsive stroke functions as a tunable hybrid system. The power phase acts as a force-vectoring mechanism, where the flipper’s twist angle reorients the resultant vector: thrust is maximized in a broad, robust range peaking near 45°, while lift increases monotonically to 90°. The paddle phase operates as a flow-insensitive, geometrically driven thruster, where twist angle (0° optimal) regulates thrust by altering the presented surface area. In the full stroke, a temporal-phase overlap governs thrust augmentation, while the power-phase twist provides robust steering control. Within the tested inertial flow regime (Re ≈ 10⁴–10⁵), this control map is highly consistent with propulsion dominated by geometric momentum redirection and impulse timing, rather than circulation-based lift. These findings establish a practical, experimentally derived control map linking kinematic inputs to propulsive force vectors, providing a foundation for the design and control of agile, bio-inspired underwater vehicles. Full article

Biorobotics leverages the principles of natural locomotion to enhance the mobility of bioinspired aquatic robots. Among various swimming modes, anguilliform locomotion is particularly recognized as an energy-efficient mode incorporating complex multiphysics. Due to whole-body undulation, the determination of the anguilliform swimmer’s direction is not trivial. Furthermore, the neuromuscular mechanism that controls straight swimming is not fully understood. This study investigates the challenge of predicting and controling the gross motion trajectory of a soft robot that utilizes anguilliform swimming. The robot consists of a six-segment continuous body, where each segment is actuated with pneumatic artificial muscles. A mode extraction technique based on dynamic mode decomposition (DMD) is proposed to identify the robot’s future state. Using the complex-variable delay embedding (CDE) technique, the CDE DMD algorithm is developed to predict the robot trajectory trend. To vary the robot direction, a hypothesis that asymmetric sidewise actuation results in slightly different fluid velocities between the left and right sides of the robot was investigated using COMSOL Multiphysics^® 6.2. The simulation results demonstrate the CDE DMD’s ability to predict gross motion across various scenarios. Furthermore, integrating the prediction model with the asymmetric actuation rule provides a control strategy for directional stability of the robot. Simulations of the closed-loop system with non-zero initial pose (step response) indicate the performance in maintaining straight-line swimming with approximately a 60s settling time. Full article

Biological systems can adaptively navigate multi-terrain environments via morphological and behavioral flexibility. While robotic systems increasingly achieve locomotion versatility in one or two domains, integrating terrestrial, aquatic, and aerial mobility into a single platform remains an engineering challenge. This work tackles this by introducing a bipedal robot equipped with a reconfigurable locomotion framework, enabling seven adaptive policies: (1) thrust-assisted jumping, (2) legged crawling, (3) balanced wheeling, (4) tricycle wheeling, (5) paddling-based swimming, (6) air-propelled drifting, and (7) quadcopter flight. Field experiments and indoor statistical tests validated these capabilities. The robot achieved a 3.7-m vertical jump via thrust forces counteracting gravitational forces. A unified paddling mechanism enabled seamless transitions between crawling and swimming modes, allowing amphibious mobility in transitional environments such as riverbanks. The crawling mode demonstrated the traversal on uneven substrates (e.g., medium-density grassland, soft sand, and cobblestones) while generating sufficient push forces for object transport. In contrast, wheeling modes prioritize speed and efficiency on flat terrain. The aquatic locomotion was validated through trials in static water, an open river, and a narrow stream. The flight mode was investigated with the assistance of the jumping mechanism. By bridging terrestrial, aquatic, and aerial locomotion, this platform may have the potential for search-and-rescue and environmental monitoring applications. Full article

The importance of bio-robotics has been increasing day by day. Researchers are trying to mimic nature in a more creative way so that the system can easily adapt to the complex nature and its environment. Hence, bio-robotic grippers play a role in the physical connection between the environment and the bio-robotics system. While handling the physical world using a bio-robotic gripper, complexity occurs in the feedback system, where the sensor plays a vital role. Therefore, a human-centered gripper sensor can have a good impact on the bio-robotics field. But categorical classification and the selection process are not very systematic. This review paper follows the PRISMA methodology to summarize the previous works on bio-robotic gripper sensors and their selection process. This paper discusses challenges in soft robotic systems, the importance of sensing systems in facilitating critical control mechanisms, along with their selection considerations. Furthermore, a classification of soft actuation based on grippers has been introduced. Moreover, some unique characteristics of soft robotic sensors are explored, namely compliance, flexibility, multifunctionality, sensor nature, surface properties, and material requirements. In addition, a categorization of sensors for soft robotic grippers in terms of modalities has been established, ranging from the tactile and force sensor to the slippage sensor. Various tactile sensors, ranging from piezoelectric sensing to optical sensing, are explored as they are of the utmost importance in soft grippers to effectively address the increasing requirements for intelligence and automation. Finally, taking everything into consideration, a flow diagram has been suggested for selecting sensors specific to soft robotic applications. Full article

Anguilliform locomotion, an efficient aquatic locomotion mode where the whole body is engaged in fluid–body interaction, contains sophisticated physics. We hypothesized that data-driven modeling techniques may extract models or patterns of the swimmers’ dynamics without implicitly measuring the hydrodynamic variables. This work proposes empirical kinematic control and data-driven modeling of a soft swimming robot. The robot comprises six serially connected segments that can individually bend with the segmental pneumatic artificial muscles. Kinematic equations and relations are proposed to measure the desired actuation to mimic anguilliform locomotion kinematics. The robot was tested experimentally and the position and velocities of spatially digitized points were collected using QualiSys^® Tracking Manager (QTM) 1.6.0.1. The collected data were analyzed offline, proposing a new complex variable delay-embedding dynamic mode decomposition (CDE DMD) algorithm that combines complex state filtering and time embedding to extract a linear approximate model. While the experimental results exhibited exotic curves in phase plane and time series, the analysis results showed that the proposed algorithm extracts linear and chaotic modes contributing to the data. It is concluded that the robot dynamics can be described by the linearized model interrupted by chaotic modes. The technique successfully extracts coherent modes from limited measurements and linearizes the system dynamics. Full article

Animals utilize their well-evolved dynamic vision systems to perceive and evade collision threats. Driven by biological research, bio-inspired models based on lobula giant movement detectors (LGMDs) address certain gaps in constructing artificial collision-detecting vision systems with robust selectivity, offering reliable, low-cost, and miniaturized collision sensors across various scenes. Recent progress in neuroscience has revealed the energetic advantages of dendritic arrangements presynaptic to the LGMDs, which receive contrast polarity-specific signals on separate dendritic fields. Specifically, feed-forward inhibitory inputs arise from parallel ON/OFF pathways interacting with excitation. However, none of the previous research has investigated the evolution of a computational LGMD model with feed-forward inhibition (FFI) separated by opposite polarity. This study fills this vacancy by presenting an optimized neuronal model where FFI is divided into ON/OFF channels, each with distinct synaptic connections. To align with the energy efficiency of biological systems, we introduce an activation function associated with neural computation of FFI and interactions between local excitation and lateral inhibition within ON/OFF channels, ignoring non-active signal processing. This approach significantly improves the time efficiency of the LGMD model, focusing only on substantial luminance changes in image streams. The proposed neuronal model not only accelerates visual processing in relatively stationary scenes but also maintains robust selectivity to ON/OFF-contrast looming stimuli. Additionally, it can suppress translational motion to a moderate extent. Comparative testing with state-of-the-art based on ON/OFF channels was conducted systematically using a range of visual stimuli, including indoor structured and complex outdoor scenes. The results demonstrated significant time savings in silico while retaining original collision selectivity. Furthermore, the optimized model was implemented in the embedded vision system of a micro-mobile robot, achieving the highest success ratio of collision avoidance at 97.51% while nearly halving the processing time compared with previous models. This highlights a robust and parsimonious collision-sensing mode that effectively addresses real-world challenges. Full article

Bio-inspired robots with elongated anatomy, like eels, are studied to discover anguilliform swimming principles and improve the robots’ locomotion accordingly. Soft continuum robots replicate animal–environment physics better than noncompliant, rigid, multi-body eel robots. In this study, a slender soft robot was designed and tested in an actual swimming experiment in a still-water tank. The robot employs soft pneumatic muscles laterally connected to a flexible backbone and activated with a rhythmic input. The position of seven markers mounted on the robot’s backbone was recorded using QualiSys^® Tracking Manager (QTM) 1.6.0.1. The system was modeled as a fully coupled fluid–solid interaction (FSI) system using COMSOL Multiphysics^® 6.1. Further data postprocessing and analysis were conducted, proposing a new mode decomposition algorithm using simulation data. Experiments show the success of swimming with a velocity of 28 mm/s and at a frequency of 0.9 Hz. The mode analysis allowed the modeling and explanation of the fluctuation. Results disclose the presence of traveling waves related to anguilliform waves obtained by the superposition of two main modes. The similarities of the results with natural anguilliform locomotion are discussed. It is concluded that soft robot undulation is ruled by dynamic modes induced by robot–environment interaction. Full article

While researchers have made notable progress in bio-inspired swimming robot development, a persistent challenge lies in creating propulsive gaits tailored to these robotic systems. The California sea lion achieves its robust swimming abilities through a careful coordination of foreflippers and body segments. In this paper, reinforcement learning (RL) was used to develop a novel sea lion foreflipper gait for a bio-robotic swimmer using a numerically modelled computational representation of the robot. This model integration enabled reinforcement learning to develop desired swimming gaits in the challenging underwater domain. The novel RL gait outperformed the characteristic sea lion foreflipper gait in the simulated underwater domain. When applied to the real-world robot, the RL constructed novel gait performed as well as or better than the characteristic sea lion gait in many factors. This work shows the potential for using complimentary bio-robotic and numerical models with reinforcement learning to enable the development of effective gaits and maneuvers for underwater swimming vehicles. Full article

Despite extensive efforts, current drug-delivery systems face biological barriers and difficulties in bench-to-clinical use. Biomedical robotic systems have emerged as a new strategy for drug delivery because of their innovative diminutive engines. These motors enable the biorobots to move independently rather than relying on body fluids. The main components of biorobots are engines controlled by external stimuli, chemical reactions, and biological responses. Many biorobot designs are inspired by blood cells or microorganisms that possess innate swimming abilities and can incorporate living materials into their structures. This review explores the mechanisms of biorobot locomotion, achievements in robotic drug delivery, obstacles, and the perspectives of translational research. Full article

Controlling robots in space with necessarily low material and structural stiffness is quite challenging at least in part due to the resulting very low structural resonant frequencies or natural vibration. The frequencies are sometimes so low that the very act of controlling the robot with medium or high bandwidth controllers leads to excitation of resonant vibrations in the robot appendages. Biomimetics or biomimicry emulates models, systems, and elements of nature for solving such complex problems. Recent seminal publications have re-introduced the viability of optimal command shaping, and one recent instantiation mimics baseball pitching to propose control of highly flexible space robots. The readership will find a perhaps dizzying array of thirteen decently performing alternatives in the literature but could be left bereft selecting a method(s) deemed to be best suited for a particular application. Bio-inspired control of space robotics is presented in a quite substantial (perhaps not comprehensive) comparison, and the conclusions of this study indicate the three top performing methods based on minimizing control effort (i.e., fuel) usage, tracking error mean, and tracking error deviation, where 96%, 119%, and 80% performance improvement, respectively, are achieved. Full article

This study introduces a cybernetic control and architectural framework for a robotic fish avatar operated by a human. The behavior of the robot fish is influenced by the electromyographic (EMG) signals of the human operator, triggered by stimuli from the surrounding objects and scenery. A deep artificial neural network (ANN) with perceptrons classifies the EMG signals, discerning the type of muscular stimuli generated. The research unveils a fuzzy-based oscillation pattern generator (OPG) designed to emulate functions akin to a neural central pattern generator, producing coordinated fish undulations. The OPG generates swimming behavior as an oscillation function, decoupled into coordinated step signals, right and left, for a dual electromagnetic oscillator in the fish propulsion system. Furthermore, the research presents an underactuated biorobotic mechanism of the subcarangiform type comprising a two-solenoid electromagnetic oscillator, an antagonistic musculoskeletal elastic system of tendons, and a multi-link caudal spine composed of helical springs. The biomechanics dynamic model and control for swimming, as well as the ballasting system for submersion and buoyancy, are deduced. This study highlights the utilization of EMG measurements encompassing sampling time and $\mu$-volt signals for both hands and all fingers. The subsequent feature extraction resulted in three types of statistical patterns, namely, $\mathsf{\Omega },\gamma ,\lambda$, serving as inputs for a multilayer feedforward neural network of perceptrons. The experimental findings quantified controlled movements, specifically caudal fin undulations during forward, right, and left turns, with a particular emphasis on the dynamics of caudal fin undulations of a robot prototype. Full article

The PowerPlex Fusion 6C PCR™ amplification kit provides a strong discriminatory power for human identification. We have validated the kit with a reduced volume (12.5 µL) and as part of the validation we compared the efficiency of the polymerase chain reaction (PCR) prepared manually and on Hamilton Microlab^® Autolys STAR Biorobot. Three years of casework data has been also included in the validation. Optimisation was carried out on different types of samples (blood, saliva, semen) and DNA was extracted robotically. Tests were conducted at two different cycle numbers (30;32), followed by analysis on both the Applied Biosystems^TM 3500 and 3500 xL Genetic Analyzer instruments (Applied Biosystems®, Foster City, CA, USA). When the PCR was prepared manually, no allele dropout was observed over 0.15 ng input DNA. Whereas when the PCR was prepared robotically, dropout already appeared at the level of 0.15 ng input DNA. In cases when increased cycle number was utilised, an increasing number of dropouts started to arise from 0.075 ng total input DNA. Despite the fact that robotically prepared PCR produced more missing alleles than the manually prepared PCR, using the optimal 0.5 ng input DNA, both methods proved to be reliable. Based on the results, our half-volume protocol is robust, and after three years of application it has proven to be effective with respect to a large number of casework samples. Full article

Prey-predator interactions play a pivotal role in elucidating the evolution and adaptation of various organism’s traits. Numerous approaches have been employed to study the dynamics of prey-predator interaction systems, with agent-based methodologies gaining popularity. However, existing agent-based models are limited in their ability to handle multi-modal interactions, which are believed to be crucial for understanding living organisms. Conversely, prevailing prey-predator integration studies often rely on mathematical models and computer simulations, neglecting real-world constraints and noise. These elusive attributes, challenging to model, can lead to emergent behaviors and embodied intelligence. To bridge these gaps, our study designs and implements a prey-predator interaction scenario that incorporates visual and olfactory sensory cues not only in computer simulations but also in a real multi-robot system. Observed emergent spatial-temporal dynamics demonstrate successful transitioning of investigating prey-predator interactions from virtual simulations to the tangible world. It highlights the potential of multi-robotics approaches for studying prey-predator interactions and lays the groundwork for future investigations involving multi-modal sensory processing while considering real-world constraints. Full article

Force myography (FMG) represents a promising alternative to surface electromyography (EMG) in the context of controlling bio-robotic hands. In this study, we built upon our prior research by introducing a novel wearable armband based on FMG technology, which integrates force-sensitive resistor (FSR) sensors housed in newly designed casings. We evaluated the sensors’ characteristics, including their load–voltage relationship and signal stability during the execution of gestures over time. Two sensor arrangements were evaluated: arrangement A, featuring sensors spaced at 4.5 cm intervals, and arrangement B, with sensors distributed evenly along the forearm. The data collection involved six participants, including three individuals with trans-radial amputations, who performed nine upper limb gestures. The prediction performance was assessed using support vector machines (SVMs) and k-nearest neighbor (KNN) algorithms for both sensor arrangments. The results revealed that the developed sensor exhibited non-linear behavior, and its sensitivity varied with the applied force. Notably, arrangement B outperformed arrangement A in classifying the nine gestures, with an average accuracy of 95.4 ± 2.1% compared to arrangement A’s 91.3 ± 2.3%. The utilization of the arrangement B armband led to a substantial increase in the average prediction accuracy, demonstrating an improvement of up to 4.5%. Full article

The motion process of legged robots contains not only rigid-body motion but also flexible motion with elastic deformation of the legs, especially for heavy loads. Hence, the characteristics of the flexible components and their interactions with the rigid components need to be considered. In this paper, a hierarchical control strategy for robots with rigid–flexible coupling characteristics is proposed. This strategy involves (1) leg force prediction based on real-time motion trajectories and feedforward compensation for the error caused by flexible components; (2) building upon the centroid dynamics model of the rigid-body chassis, the centroid trajectories (centroid angular momentum (CAM) and centroid linear momentum (CLM)) and the body trajectory are taken into account to derive the optimal drive torque for maintaining body stability; (3) finally, the precise force control of the hydraulic drive units is achieved through the sliding mode control algorithm, integrating the dynamic model of the flexible legs. The proposed methods are validated on a giant hexapod robot weighing 3.5 tons, demonstrating that the introduced approach can reduce the robot’s vibrations. Full article