Search Results (49)

Biomass-derived carbon dots (CDs) have attracted increasing attention in agriculture due to their simple synthesis and low environmental impact. In this study, CDs were synthesized from guava (Psidium guajava) leaves using a hydrothermal method (200 °C, 15 h). The particles had an average size of 6.17 nm and a quantum yield of 2.46%, confirming the successful synthesis of fluorescent carbon nanomaterials from the natural precursor. The effects of CDs on rice (Oryza sativa L., variety HT1) were evaluated through both seed treatment and field application. Soaking seeds in a 200 ppm CD solution for 24 h significantly enhanced shoot and root lengths (28.87 mm and 34.00 mm, respectively) among the tested treatments. In field trials, applying CDs at the same concentration also promoted plant growth, as evidenced by improvements in plant height, leaf development, tillering, and flag leaf characteristics. These changes were reflected in yield, with the highest grain yield of 6.13 t ha⁻¹ at 200 ppm, exceeding that of the control treatment. The observed positive effects may be due to enhanced photosynthetic activity and better control of oxidative processes in plants. Nevertheless, the effect was less pronounced at higher concentrations. This trend suggests a dose-dependent response. Full article

In this study, carbon quantum dots (CQDs) were synthesized from various lignocellulosic and hemicellulosic biomass precursors via a semi-hydrothermal torrefaction process, and their structural, optical, colloidal, and photocatalytic properties were systematically investigated. Biomass sources including Oriental thuja cone (Thuja orientalis), sawdust, tea waste, apricot kernel shell, walnut shell, sugar beet pulp, hazelnut residue, soybean residue, and chitosan were used to evaluate the effect of precursor composition on CQDs characteristics. UV–Vis spectroscopy confirmed the formation of CQDs in all samples, exhibiting characteristic π–π* and n–π* transitions, while significant variations in absorption intensity and spectral behavior were observed depending on biomass type. Dynamic light scattering and zeta potential analyses revealed that most CQDs exhibited aggregation tendencies, with limited systems showing improved colloidal stability due to electrostatic and/or steric stabilization. The synthesized CQDs were combined with TiO₂ and their influence on the photocatalytic degradation of Reactive Black 5 under UV irradiation was investigated. Although high decolorization efficiencies (85–98%) were achieved, total organic carbon removal remained lower (2.6–41.4%), indicating incomplete mineralization. The highest mineralization efficiencies were observed for TiO₂ systems modified with sawdust- and thuja-derived CQDs. Overall, the results demonstrate that the photocatalytic performance of CQDs-modified TiO₂ systems is governed not only by optical properties but also by surface functionalization, colloidal stability, and charge carrier dynamics. The findings highlight the critical role of biomass composition in determining CQD properties and provide a comparative framework for designing sustainable nanomaterials for environmental applications. Full article

Carbon dots (CDs), including carbon quantum dots (CQDs), are ultra-small carbon-based nanomaterials, typically below 10 nm, with tunable photoluminescence, high aqueous dispersibility, favorable biocompatibility, low toxicity, and abundant surface functional groups. These properties make CDs promising multifunctional platforms for nanomedicine, particularly in bioimaging, biosensing, targeted drug/gene delivery, photodynamic therapy (PDT), photothermal therapy (PTT), antimicrobial treatment, and theranostic applications. This review critically examines recent advances in CD fabrication, including top-down, bottom-up, green biomass-derived, microwave-assisted, hydrothermal, and emerging hybrid strategies, with emphasis on how precursor selection, heteroatom doping, surface passivation, and polymer/ligand functionalization regulate optical performance, biological interaction, and therapeutic efficiency. The review discusses structural classification, including CQDs, graphene quantum dots (GQDs), carbon nanodots, and carbonized polymer dots (CPDs), together with major characterization approaches such as ultraviolet–visible (UV–Vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and high-resolution transmission electron microscopy (HRTEM). Particular attention is given to red/near-infrared (NIR) emission, renal clearance, drug-loading behavior, reactive oxygen species (ROS) generation, toxicity mechanisms, biodistribution, and long-term biosafety. This review also highlights key translational barriers, including batch-to-batch variability, limited standardization, scalable manufacturing, regulatory uncertainty, and incomplete pharmacokinetic evaluation. It considers artificial intelligence (AI) and machine learning (ML) as emerging tools for reproducible CD design. CDs represent versatile and clinically promising nanoplatforms, but their translation requires standardized synthesis, rigorous safety assessment, and application-specific regulatory validation. Full article

Aqueous zinc-ion batteries (AZIBs) are highly promising for large-scale energy storage applications owing to their distinct merits, such as exceptional safety, abundant zinc reserves, high ionic conductivity, and facile manufacturing. Featuring natural abundance, low cost, environmental benignity, and high theoretical specific capacity, Mn₂O₃ has emerged as one of the most competitive cathode candidates for AZIBs. However, the low electrical conductivity of Mn₂O₃ impedes electron transport within the electrode, leading to significant polarization during charging and discharging and poor rate performance. Therefore, this study focuses on Mn₂O₃, and combines it with lignin-derived N,S-co-doped carbon dots (NS-CDs). Through a composite modification strategy, efficient conductive pathways are constructed and the structure of Mn₂O₃ is stabilized simultaneously, thereby effectively enhancing the electrical conductivity of the modified cathode. The incorporation of NS-CDs improves the high-rate response of the Mn₂O₃ cathode, with the optimized composite retaining capacity stability at 5 A g⁻¹. At 0.2 A g⁻¹, the specific capacity reaches 174 mAh g⁻¹, and at a current density of 1 A g⁻¹, the material can sustain 1000 cycles. These results highlight biomass-derived carbon dots as a viable interfacial modifier for Mn-based AZIB cathodes. Full article

Wastewater-based epidemiology (WBE) has emerged as a powerful approach for population-level monitoring of chemical exposure, health status, and disease transmission by analysing wastewater. Although chromatographic and molecular techniques remain the gold standard in WBE, their high cost, infrastructural demands, and limited suitability for decentralized and real-time monitoring motivate the development of complementary sensing technologies. In this context, optical (bio)sensors, particularly fluorescence-based platforms, have attracted increasing attention due to their high sensitivity, rapid response, and potential for on-site monitoring. This review discusses recent advances in fluorescent optical (bio)sensors for WBE, with a particular focus on carbon dots (CDs), including waste- and biomass-derived CDs produced via green synthesis as well as CDs obtained from commercial chemicals. The applicability of CD-based sensors to wastewater-relevant analytes is evaluated, highlighting current achievements, as well as existing limitations and challenges related to real-sample validation and the translation of these platforms into robust, field-deployable systems for their implementation in sustainable wastewater monitoring and public health surveillance. Full article

Hydrogen peroxide (H₂O₂) is a widely used green oxidant, yet its conventional industrial production via the anthraquinone process is energy-intensive and environmentally unfriendly. Photocatalytic oxygen reduction reaction (ORR) presents a sustainable alternative for H₂O₂ synthesis, but its practical application is limited by inefficient light absorption, low charge separation efficiency, and sluggish reaction kinetics. In this work, we developed a metal-free carbon-based photocatalyst (QCDs) acquired by modifying quercetin with carbon dots (CDs) for efficient photogeneration of H₂O₂. The optimized QCDs achieved a H₂O₂ production rate of 1116.32 μmol·h⁻¹·g⁻¹, which is 40.3% higher than that of pristine quercetin. Comprehensive analysis with transient potential scanning (TPS), transient photovoltage (TPV), and photocurrent transient (TPC) measurements reveal that the photocatalytic ORR follows a two-step single-electron pathway. It is worth noting that CDs not only promote the generation and transfer of photogenerated electrons but also boost oxygen adsorption. Our work demonstrates the synergy of integrating biomass-derived materials with nanostructural engineering and optimizing the system with data-driven approaches for enhanced photocatalysis. Full article

Drought stress induces oxidative damage that severely impairs the growth and development of ginseng seedlings. Although conventional antioxidants present a theoretical approach for mitigating such oxidative damage, their practical application is constrained by their inadequate stability. Herein, we developed multifunctional antioxidant carbon dots (CDs) synthesized from the medicinal herb Epimedium via a one-step hydrothermal method. The biomass-derived CDs exhibited efficient cascade nanozyme activities for mimicking both superoxide dismutase and catalase to achieve effective scavenging of multiple reactive oxygen species (ROS). Under drought stress, application of CDs to ginseng seedlings significantly mitigated oxidative damage through the modulation of the antioxidant enzyme system and improved osmotic regulation. Simultaneously, it could enhance photosynthetic efficiency and mitigate growth suppression caused by drought. Transcriptomic analysis revealed that CDs alleviated drought stress by triggering transcriptional reprogramming that activated genes related to antioxidant defense, photosynthetic efficiency, and stress signaling. Additionally, the CDs exhibited excellent biocompatibility and environmental safety. This work provides a novel and environmentally friendly strategy to enhance drought tolerance in medicinal plants. Full article

In this work, novel biomass-derived carbon dots (CDs) with superior fluorescent properties were prepared from tomato straws. A selective, eco-friendly tetracycline (TC) sensor was fabricated by immobilizing a SiO₂ molecularly imprinted polymer (MIP) layer onto CDs, forming a CDs@SiO₂-MIP composite. This sensor combined highly selective adsorption properties with the sensitivity of fluorescence detection, with the sensing mechanism stemming from the off-fluorescent signal after molecular imprinting specifically recognizing the target substance. Under optimal conditions, the sensor exhibited a linear response to TC concentrations ranging from 1.00 × 10⁻⁷ to 5.00 × 10⁻⁴ mol/L, with fluorescence intensity decreasing as concentration increased. The detection limit of TC was 9.33 × 10⁻⁸ mol/L. This work provides novel biomass-derived CDs and a simple molecularly imprinted fluorescence sensing method for the detection of environmental organic pollutants. Full article

Carbon dots (CDs) have emerged as promising nanomaterials for optical sensing due to their outstanding photoluminescence, chemical stability, and biocompatibility. In recent years, the development of sustainable CDs derived from biomass—particularly cellulose—has attracted increasing interest as a green alternative to conventional synthetic routes. This review offers a comprehensive overview of recent advances in synthesis, functionalization, and application of cellulose-based carbon dots for environmental sensing. We examine key synthetic approaches—including hydrothermal, microwave-assisted, and pyrolytic methods—and discuss how the structure and origin of cellulose influence the physicochemical properties of the resulting CDs. The mechanisms underlying their sensing performance are analyzed in detail, with a focus on the detection of heavy metals, organic pollutants, and other environmental contaminants. Challenges related to reproducibility, scalability, and long-term stability are critically addressed. Finally, we outline future directions involving hybrid nanomaterials, real-time sensing platforms, and strategies aligned with circular economy principles. This review aims to serve as a valuable resource for researchers in the fields of sustainable nanomaterials, green chemistry, and environmental sensor development. Full article

The overabundance of Ulva australis (U. australis), a green macroalga widespread along the coastline of Jeju Island, Republic of Korea, presents a growing ecological challenge, as it can cause unpleasant odors and disturb the ecological balance. Hence, we report a sustainable valorization strategy for converting U. australis biomass into marine carbon dots (MCDs) via a facile hydrothermal carbonization process. The synthesis requires no hazardous reagents or complex instrumentation and yields highly water-dispersible MCDs with excitation-dependent fluorescence properties. Comprehensive in vitro and in vivo assessments revealed the multifunctional bioactivity of the synthesized MCDs. Moreover, in vivo fluorescence imaging at seven days post-fertilization revealed the preferential accumulation of MCDs along the vertebral column, implying a possible affinity for mineralized tissues and suggesting their utility in skeletal imaging applications. Collectively, these findings underscore the potential of U. australis-derived MCDs as biocompatible and multifunctional nanomaterials with broad biomedical applications. Full article

The growing demand for natural and sustainable food preservatives has drawn interest in carbon dots (CDs) derived from plant sources. This study aimed to synthesize CDs from dried German chamomile flowers (DF) and residual biomass (RB) obtained after essential oil extraction using a hydrothermal process. Their characteristics, bioactivities and cytotoxicity were examined. Both DF-CDs and RB-CDs were spherical (7–10 nm), exhibited strong UV blocking properties and tunable fluorescence and were rich in polyphenolic functional groups, especially the –OH group. DF-CDs generally showed higher antioxidant capacity than RB-CDs as assayed by DPPH, ABTS radical scavenging activities, FRAP and metal chelation activity. Both CDs showed antibacterial effects toward pathogenic bacterial strains (Escherichia coli and Listeria monocytogenes) and spoilage bacteria (Shewanella putrefaciens and Pseudomonas aeruginosa) in a dose-dependent manner. Cytotoxicity was assessed in BJ human fibroblasts, and both CDs exhibited high biocompatibility (>88% viability at 1000 µg/mL). When both CDs at 300 and 600 ppm were applied in a precooked baby clam edible portion (PBC-EP) stored at 4 °C, microbial growth, TVB and TMA contents were lower than those of the control. The total viable count was still under the limit (5.8 log CFU/mL) for the sample treated with CDs at 600 ppm up to 9 days, while the control was kept for only 3 days. Furthermore, the lipid oxidation level (PV and TBARS value) of PBC-EP decreased with CD treatment, especially at higher concentrations (600 ppm). Therefore, chamomile-derived CDs could serve as a promising alternative for perishable seafood preservation. Full article

Carbon dots (CDs) derived from renewable biomass are emerging as sustainable alternatives to traditional nanomaterials for applications in bioimaging, sensing, and photonics. In this study, we reported a one-step synthesis of photoluminescent CDs from Laurus nobilis leaves particularly spread in the Mediterranean area. The resulting nanoparticles (NPs) exhibited average diameters of 3–5 nm and high colloidal stability in water. Structural analysis by X-Rays Diffraction revealed the presence of amorphous graphitic domains, while infrared spectroscopy confirmed oxygenated functional groups on the CD surface. Spectrofluorimetric analysis showed excitation-dependent blue–green emission with a maximum at 490 nm that can be applied also as label agents for cells. The environmental sustainability of the synthetic procedure was evaluated through a Life Cycle Assessment (LCA), highlighting that the current impacts were primarily associated with electricity consumption, due to the laboratory-scale nature of the process. These impacts are expected to decrease significantly with future scale-up and process optimization. Full article

With the intensification of the global energy crisis, green, low-carbon, and environmentally friendly biomass materials have become the focus of research. Among them, biomass-derived carbon dots (B-CDs), a novel class of sustainable zero-dimensional carbon nanomaterials, attract significant interest due to their environmental friendliness, low toxicity, and unique optical properties. Research findings indicate that B-CDs, utilizing biomass materials as carbon sources, demonstrate significant potential in numerous application fields through structural design and photo-functionalization. However, the underlying mechanisms and formation processes of B-CDs remain inadequately elucidated, and systematic summarization still requires further refinement. Therefore, this review systematically summarizes the synthesis methods, precursor structures, formation mechanisms, luminescent properties, and prevailing applications of B-CDs, with a particular emphasis on recent advances in their use for sensing, anti-counterfeiting, bioimaging, and optronics. In addition, the challenges encountered in performance-oriented controllable preparation and large-scale production were also clarified. This comprehensive review provides a theoretical foundation for further research and multidisciplinary applications of B-CDs, thereby contributing to promoting large-scale commercialization and industrial implementation. Full article

Introduction: Functional endoscopic sinus surgery is commonly performed to treat paranasal sinus diseases, often necessitating nasal packing to control bleeding and aid healing. However, current materials can cause discomfort or lack adequate antibacterial properties. This study aimed to develop a biodegradable, biocompatible nasal packing material by combining polyvinyl alcohol (PVA) and carbon dots (CDs), and to evaluate its antibacterial activity and tissue compatibility. Materials and Methods: Electrospun nanofiber membranes were fabricated using PVA and biomass-derived CDs. Antibacterial efficacy of nasal packing variants (PVA, PVA-chitosan [CS], PVA-CS-CDs-1 mL, and PVA-CS-CDs-2 mL) was assessed using the Kirby–Bauer disk diffusion method against Escherichia coli, Salmonella spp., and Staphylococcus aureus. The in vivo biocompatibility was evaluated via histological analysis following implantation into the nasal cavity of mice. Results: All materials demonstrated antibacterial activity, with PVA-CS-CDs-2 mL showing the largest inhibition zones. Histological examination revealed minimal epithelial damage and no inflammation, with PVA-CS-CDs-2 mL yielding the most favorable tissue response. Conclusion: The PVA-CS-CDs composite demonstrates potential as a biocompatible, antibacterial nasal packing material. Further studies are warranted to validate its long-term clinical utility. Full article

Incessant urbanization and industrialization have resulted in several pollutants being increasingly produced and continuously discharged into the environment, altering its equilibrium, with a high risk for living organisms’ health. To restore it, new advanced materials for remediating gas streams, polluted soil, water, wastewater, groundwater and industrial waste are continually explored. Carbon-based nanomaterials (CNMs), including quantum dots, nanotubes, fullerenes and graphene, have displayed outstanding effectiveness in the decontamination of the environment by several processes. Carbon nanotubes (CNTs), due to their nonpareil characteristics and architecture, when included in absorbents, filter membranes, gas sensors, etc., have significantly improved the efficiency of these technologies in detecting and/or removing inorganic, organic and gaseous xenobiotics and pathogens from air, soil and aqueous matrices. Moreover, CNT-based membranes have displayed significant potential for efficient, fast and low-energy water desalination. However, despite CNTs serving as very potent instruments for environmental detoxification, their extensive utilization could, paradoxically, be highly noxious to the environment and, therefore, humans, due to their toxicity. The functionalization of CNTs (F-CNTs), in addition to further enhancing their absorption capacity and selectivity, has increased their hydrophilicity, thus minimizing their toxicity and carcinogenic effects. In this scenario, this review aims to provide evidence of both the enormous potential of CNTs in sustainable environmental remediation and the concerning hazards to the environment and living organisms that could derive from their extensive and uncontrolled utilization. To this end, an introduction to CNTs, including their eco-friendly production from biomass, is first reported. Several literature reports on CNTs’ possible utilization for environmental remediation, their potential toxicity due to environmental accumulation and the challenges of their regeneration are provided using several reader-friendly tools, to better capture readers’ attention and make reading easier. Full article