Search Results (170)

Biofilms are structured communities of microorganisms encased in a self-produced extracellular matrix, and they represent one of the most widespread forms of microbial life on Earth. Their presence poses serious challenges in both environmental and clinical settings. In natural and industrial systems, biofilms contribute to water contamination, pipeline corrosion, and biofouling. Clinically, biofilm-associated infections are responsible for approximately 80% of all microbial infections, including endocarditis, osteomyelitis, cystic fibrosis, and chronic sinusitis. A particularly critical concern is their colonization of medical devices, where biofilms can lead to chronic infections, implant failure, and increased mortality. Implantable devices, such as orthopedic implants, cardiac pacemakers, cochlear implants, urinary catheters, and hernia meshes, are highly susceptible to microbial attachment and biofilm development. These infections are often recalcitrant to conventional antibiotics and frequently necessitate surgical revision. In the United States, over 500,000 biofilm-related implant infections occur annually, with prosthetic joint infections alone projected to incur revision surgery costs exceeding USD 500 million per year—a figure expected to rise to USD 1.62 billion by 2030. To address these challenges, surface modification of medical devices has emerged as a promising strategy to prevent bacterial adhesion and biofilm formation. This review focuses on recent advances in chemical surface functionalization using non-antibiotic agents, such as enzymes, chelating agents, quorum sensing quenching factors, biosurfactants, oxidizing compounds and nanoparticles, designed to enhance antifouling and mature biofilm eradication properties. These approaches aim not only to prevent device-associated infections but also to reduce dependence on antibiotics and mitigate the development of antimicrobial resistance. Full article

This study aimed to develop an innovative resin composite with anti-biofouling properties, tailored to prosthesis fabrication in dentistry using a digital light processing (DLP) 3D-printing technique. The resin composite was formulated using a blend of dental monomers, with the integration of 2-methacryloyloxylethyl phosphorylcholine (MPC) with anti-biofouling behavior and γ-MPS-treated silica-zirconia powder for simultaneous mechanical reinforcement. The overall characterization of the resin composite was carried out using various contents of MPC incorporated into the resin (0–7 wt%) for examining the rheological behavior, photopolymerization, flexural strength/modulus, microstructure and anti-biofouling efficiency. The resin composite demonstrated a significant reduction in bacterial adhesion (97.4% for E. coli and 86.5% for S. aureus) and protein adsorption (reduced OD value from 1.3 ± 0.4 to 0.8 ± 0.2) with 7 wt% of MPC incorporation, without interfering with photopolymerization to demonstrate potential suitability for 3D printing without issues (p < 0.01, and p < 0.05, respectively). The incorporation and optimization of γ-MPS-treated silica-zirconia powder (10–40 vol%) enhanced mechanical properties, leading to a reasonable flexural strength (103.4 ± 6.1 MPa) and a flexural modulus (4.3 ± 0.4 GPa) at 30 vol% (n = 6). However, a further increase to 40 vol% resulted in a reduction in flexural strength and modulus; nevertheless, the results were above ISO 10477 standards for dental materials. Full article

Zwitterionic hydrogels have emerged as eco-friendly anti-fouling materials owing to their superior hydration-mediated resistance to biofouling. Nevertheless, their practical utility remains constrained by intrinsically poor mechanical robustness. Herein, this study proposes a novel strategy to develop novel tough zwitterionic hydrogels by freezing the gels’ polymer network. As a proof of concept, a zwitterionic hydrogel was synthesized via copolymerization of hydrophobic monomer phenyl methacrylate (PMA) and hydrophilic cationic monomer N-(3-dimethylaminopropyl) methacrylamide (DMAPMA), followed by post-oxidation to yield a zwitterionic structure. At service temperature, the rigid and hydrophobic PMA segments remain frozen, while the hydrophilic zwitterionic units maintain substantial water content by osmotic pressure. Synergistically, the zwitterionic hydrogel achieves robust toughness and adhesiveness, with high rigidity (66 MPa), strength (4.78 MPa), and toughness (2.53 MJ/m³). Moreover, the hydrogel exhibits a distinct temperature-dependent behavior by manifesting softer and more stretchable behavior after heating, since the thawing of the gel network at high temperatures increases segmental mobility. Therefore, it achieved satisfactory adhesiveness to substrates (80 kPa). Additionally, the hydrogel demonstrated remarkable anti-fouling performance, effectively suppressing biofilm formation and larval attachment. In summary, this work opens up promising prospects for the development of zwitterionic hydrogels with high application potential. Full article

Bacterial adhesion and the subsequent formation of biofilms and biofouling have significant economic and health impacts across all sectors. They are especially impactful in industrial corrosion, healthcare, food processing, agriculture, and waste and drinking water. Synthetic polymers that resist bacterial adhesion are adaptable to a wide range of applications in all of these fields. While there are many bacteria-resistant polymers, some of the best performing include polyethylene glycol (PEG), poly(oxazoline) (POZ), and zwitterionic polymers, with zwitterionic polymers showing the most promise with reductions in bacteria adhesion up to 99% over controls. This review summarizes the demonstrated bacterial resistance performance of these polymer coatings based on literature published over the last ten years. It also identifies the front runners for preventing bacterial adhesion while providing the critical next steps for widespread adoption of this technology. Full article

Marine biofouling, the process of marine microorganisms, algae, and invertebrates attaching to and forming biofilms on ship hulls, underwater infrastructure, and marine equipment in ocean environments, severely impacts shipping and underwater operations by increasing fuel consumption, maintenance costs, and corrosion risks, and by threatening marine ecosystem stability via invasive species transport. This study reports the development of a hydrogel-metal-organic framework (MOF)-quorum sensing inhibitor (QSI) antifouling coating on 304 stainless steel (SS) substrates. Inspired by mussel adhesion, a hydrophilic bionic hydrogel was first constructed via metal ion coordination. The traditional metal ion source was replaced with a zeolitic imidazolate framework-8 (ZIF-8) loaded with 2-(5H)-furanone (HF, a QSI) without altering coating formation. Physicochemical characterization using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), the Brunauer–Emmett–Teller (BET) method, and the diffraction of x-rays (XRD) confirmed successful HF loading into ZIF-8 with intact crystal structures. Antifouling tests showed HF@ZIF-8 enhanced antibacterial inhibition against Staphylococcus aureus (97.28%) and Escherichia coli (>97%) and suppressed Chromobacterium violaceum CV026 pigment synthesis at 0.25 mg/mL (sub-growth concentration). The reconstructed PG/PVP/PEI/HF@ZIF-8 coating achieved 72.47% corrosion inhibition via synergistic anodic protection and physical shielding. This work provides a novel green approach for surface antifouling and drag reduction, highlighting MOF-loaded QSIs as promising additives to enhance the antifouling performance of hydrogel coatings, anti-corrosion performance, and QSI performance for sustainable marine engineering applications. Full article

Biofouling, the undesirable deposition of microorganisms on surfaces, is ubiquitous in aqueous systems. This is no different for systems running with water-miscible metalworking fluids (MWFs), which additionally contain many organic chemicals that create favorable conditions for growth and metabolism. Biofilm formation is thus inevitable, as there is no shortage of wetted surfaces in metalworking systems. MWF manufacturers tried in vain to offer resistance by using biocides and biostatic compounds as ingredients in concentrates and as tank-side additives. We report here that such elements, alone or as components of MWFs, did not prevent biofilm formation and had negligible effects on pre-established laboratory biofilms. Moreover, biofilms in metalworking systems are interwoven with residues, sediments, and metal swarfs generated during machining. Again, co-incubation of such “real” biofilms with MWFs had no significant effect on population size—but on population composition! The implications of this finding are unclear but could provide a starting point for the treatment of biofouling, as biofilm population structure might be of importance. Finally, we show that bacteria gain function in biofilms and that they were able to degrade a toxic amine in MWFs, which the same bacteria were unable to do in planktonic form. Full article

Precise separation and antifouling capabilities are critical for the application of membrane separation technology. In this work, we developed a multiplayer layer-by-layer assembly strategy to sequentially deposit tannic acid (TA) and lysozyme (Lys) onto polyethersulfone/iron (PES/Fe) ultrafiltration membrane substrates, enabling the simple and efficient fabrication of a biofouling-resistant loose nanofiltration (LNF) membrane with superior dye/salt separation performance. This approach fully leverages the multifunctionality of TA by exploiting its coordination with Fe³⁺ and non-covalent interactions with Lys. The obtained PES/Fe-TA-Lys LNF membrane exhibits a pure water flux of 57.5 L·m⁻²·h⁻¹, along with exceptional dye rejection rates (98.3% for Congo Red (CR), 99.2% for Methyl Blue (MB), 98.4% for Eriochrome Black T (EBT), and 67.6% for Acid Orange 74 (AO74)) while maintaining minimal salt retention (8.2% for Na₂SO₄, 4.3% for MgSO₄, 3.5% for NaCl, and 2.4% for MgCl₂). The PES/Fe-TA-Lys LNF membrane also displays outstanding antifouling performance against bovine serum albumin (BSA), humic acid (HA), and CR, along with strong biofouling resistance against Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) via synergistic anti-adhesion and biofilm inhibiting effects. This work presents a novel and scalable approach to fabricating biofouling-resistant LNF membranes, offering great potential for dye/salt separation in textile wastewater treatment. Full article

Marine biofouling is a significant challenge for industries that rely on seawater. This study examined the effect of structural materials, carbon concentration, and salinity on biofilm formation. Furthermore, it compares the disinfection efficiency of chlorine (NaClO) and bromine (NaBr) biocides and attempts to identify their optimal dosing. Among tested materials, PVC exhibited the highest microbial attachment (40%), followed by plastic (30%) and concrete (23%). Biofilm attachment and growth increased with higher concentrations of total organic carbon (TOC), which depends upon the seawater’s salinity. The simultaneous reduction of salinity and TOC concentration further enhanced the biofilm attachment and growth. A strong positive linear correlation (r = 0.98 and p = 0.003) was found between the initial cell count of seawater and biofilm formation. Disinfection experiments showed that NaBr (97.36%) was slightly more effective than NaClO (95.83%). Response Surface Methodology (RSM) identified optimal disinfection conditions: 0.6 mg/L biocide concentration and 138 min dosing period. Generally, there are three strategies for reducing biofilm growth: selecting appropriate materials, controlling carbon concentrations, or optimizing concentrations and dosing periods with biocides. Full article

Reverse osmosis (RO) desalination technology offers a promising solution for mitigating water scarcity. However, one of the major challenges faced by RO membranes is biofouling, which significantly increases the desalination costs. Traditional simulation models often overlook environmental variability and do not incorporate the effects of membrane-surface modifications. This paper develops a bacterial growth model for the prediction of seawater desalination performance, applicable to commercial RO membranes, which can be either uncoated or coated with iron nanoparticles (FeNPs or nZVI). FeNPs were selected due to their known antimicrobial properties and potential to mitigate biofilm formation. The native seawater bacterium Bacillus halotolerans MCC1 was used as a model biofouling bacterium. Growth kinetics were determined at different temperatures (from 26 to 50 °C) and pH values (from 4 to 10) to obtain growth parameters. Microbial growth on RO membranes was modeled using the Monod equation. The desalination performance was evaluated in terms of hydraulic resistance and permeate flux under clean and biofouled conditions. The model was validated using desalination data obtained at the laboratory scale. Bacteria grew faster at 42 °C and pH 10. The pH had a more significant effect than temperature on the bacterial growth rate. The FeNP-coated membranes exhibited lower resistance and maintained a higher long-term water flux than the commercial uncoated membrane. This modeling approach is useful for improving the monitoring of feed water parameters and assessing the operational conditions for minimum biofouling of RO membranes. In addition, it introduces a novel integration of environmental parameters and membrane coating effects, offering a predictive tool to support operational decisions for improved RO performance. Full article

The antifouling performance of a zwitterionic sulfobetaine-hydroxyethyl-containing polymethylmethacrylate ter-co-polymer (PSBM) is evaluated against three photosynthetic strains, namely Chlorella sp., Nannochloropsis sp., and Arthrospira maxima. PSBM-coated polymethylmethacrylate (PMMA) surfaces displayed a significantly reduced propensity for biofilm formation compared to rough and untreated controls, leaving clean surfaces after 7 days of exposure. A tribological approach was adopted to estimate the long-term durability of the PSBM coating. Repeated cycles of exposure to Chlorella sp., Nannochloropsis sp., and A. maxima biomass subject the coating to stress and continuous biofilm challenges. After several cycles, the PSBM coating maintains a higher antifouling efficacy than the untreated PMMA surface, suggesting stability and high potential in photobioreactor applications. Full article

Microorganisms play a significant role in biofouling and biocorrosion within the maritime industry. Addressing these challenges requires an innovative and integrated approach utilizing marine natural products with beneficial properties. A comprehensive screening of 173 non-toxic EtOAc and H₂O extracts derived from diverse marine organisms collected in Indonesian waters was conducted using a robust panel of assays. These included antimicrobial tests and classical biosurfactant assays (drop collapse and oil displacement), as well as anti-quorum-sensing (QS) and anti-biofilm assays. These screening efforts identified five active extracts with promising activities. Among these, EtOAc extracts of the marine tunicate Sigilina cf. signifera (0159-22e) and the marine sponge Lamellodysidea herbacea (0194-24c) demonstrated significant anti-biofouling activity against Perna indica and anti-biocorrosion performance (mpy 10.70 ± 0.70 for S. cf. signifera; 7.87 ± 0.86 for L. herbacea; 13.60 ± 1.70 for positive control Tetracorr CI-2915). Further chemical analyses of the active extracts, including LC-HR-MS/MS, MS-based molecular networking, and chemoinformatics, revealed the presence of both known and new bioactive compounds. These included tambjamines and polybrominated diphenyl ethers (PBDEs), which are likely contributors to the observed bioactivities. Subsequent investigations uncovered new anti-QS and anti-biofilm properties in synthetic and natural PBDEs 1–12 previously derived from L. herbacea. Among these, 8 exhibited the most potent anti-QS activity, with an IC₅₀ value of 15 µM, while 4 significantly reduced biofilm formation at a concentration of 1 µM. This study highlights the potential of marine-derived compounds in addressing biofouling and biocorrosion challenges in a sustainable and effective manner. Full article

An ultrafiltration (UF) installation was used to separate the actual wastewater from a car wash. Following these studies, the plant was washed several times; however, severe membrane fouling was observed during the filtration of sterile deionised (DI) water. As a result, the permeate flux decreased by more than 50% after 5 h of the UF process. The source of the fouling was the release of deposits, particularly bacteria, from the surfaces of plant elements such as pipes and pumps. The paper presents the effectiveness of biofilm removal from the surface of the equipment during a cyclically repeated washing process. Chemical washing was carried out using acid solutions and alkaline cleaning solutions containing NaOH (pH = 11.5–12). After installation cleaning, the filtration tests were carried out using DI water as a feed. It was determined how biofouling, which develops under these conditions, reduces permeate flux. Despite 3 h of installation washing, there was a 50% reduction in flux after 10 h of UF. Repeating the installation wash (4 h) resulted in a similar decrease in flux after 4 days of UF. Stabilisation of the flux at a level of 500 LMH was achieved after an additional 5 h of washing, including application of hot (323–333 K) alkaline cleaning solutions. The number of bacteria in the biofilm collected from the surface of the membranes, the pump inlet and the surface of the polyvinyl chloride (PVC) hoses forming the pipeline was also investigated. Despite repeated chemical cleaning, the number of bacteria on the pump and hose surfaces was 50–100 CFU/cm². Studies were carried out to determine which bacterial species survived the chemical cleaning of the installation. Gram-positive and Gram-negative bacteria were determined, and taxonomic characteristics of the isolated bacteria were identified. Full article

Recent research efforts to mitigate the burden of biofouling in marine environments have focused on the development of environmentally friendly coatings that can provide long-lasting protective effects. In this study, the antifouling performance of novel polyurethane (PU)-based coatings containing cyclam-based Fe(III) complexes against Cobetia marina biofilm formation was investigated. Biofilm assays were performed over 42 days under controlled hydrodynamic conditions that mimicked marine environments. Colony-forming units (CFU) determination and flow cytometric (FC) analysis showed that PU-coated surfaces incorporating 1 wt.% of complexes with formula [{R₂(^4-CF3PhCH₂)₂Cyclam}FeCl₂]Cl (R = H, HOCH₂CH₂CH₂) significantly reduced both culturable and total cells of C. marina biofilms up to 50% (R = H) and 38% (R = HOCH₂CH₂CH₂) compared to PU-coated surface without complexes (control surface). The biofilm architecture was further analyzed using Optical Coherence Tomography (OCT), which showed that biofilms formed on the PU-coated surfaces containing cyclam-based Fe(III) complexes exhibited a significantly reduced thickness (58–61% reduction), biovolume (50–60% reduction), porosity (95–97% reduction), and contour coefficient (77% reduction) compared to the control surface, demonstrating a more uniform and compact structure. These findings were also supported by Confocal Laser Scanning Microscopy (CLSM) images, which showed a decrease in biofilm surface coverage on PU-coated surfaces containing cyclam-based Fe(III) complexes. Moreover, FC analysis revealed that exposure to PU-coated surfaces increases bacterial metabolic activity and induces ROS production. These results underscore the potential of these complexes to incorporate PU-coated surfaces as bioactive additives in coatings to effectively deter long-term bacterial colonization in marine environments, thereby addressing biofouling-related challenges. Full article

Biofouling in the membrane bioreactor (MBR) is a bottleneck in operation. This study explores the use of cis-2-decenoic acid (CDA) to mitigate biofouling. CDA is a signaling molecule known to disperse biofilms, which is reported to reduce the extracellular polymeric substances (EPS) of biofilms and make them less chemically resistant. In our experiments, CDA 300 nM was used for the backwashing biofouling in MBR, and backwashing with CDA followed by 0 to 500 mg/L sodium hypochlorite (NaOCl) was also performed. The synergistic effect of CDA and NaOCl in alleviating biofouling was observed at CDA 300 nM and 100 mg/L NaOCl. However, controversial phenomena occurred under other conditions. An increase in biofilm removal efficiency with higher concentrations of NaOCl was not observed. Instead, the fouling rate increased at a 200 mg/L NaOCl condition compared to the control condition (i.e., DW washing). This phenomenon is hypothesized to result from the antagonistic interaction between the dispersion induction by CDA and the stress induced by NaOCl. This study specifically demonstrated the efficiency of two-stage backwashing with CDA and NaOCl in various aspects. The results of this study are expected to be utilized for optimizing MBR backwashing protocols. Full article

Candida forms a gel-like biofilm in the Foley’s catheter (FC) causing tenacious biofouling and severe urinary tract infections (UTIs). For the first time, a spice extract-based antifungal lock therapy (ALT) has been developed to inhibit the Candida albicans gel matrix in FC. Aqueous extracts of garlic, clove, and Indian gooseberry were used as ALT lock solutions and tested against biofilm-forming multidrug-resistant clinical isolates of C. albicans. Reduction in the gel matrices formation in the catheter was confirmed by Point inoculation, MTT assay, CFU, and SEM analysis at 12 and 24 h of incubation. Garlic was effective in controlling both C. albicans M207 and C. albicans S470; however, clove and gooseberry effectively controlled the latter. As evidenced by CFU assay, there were 82.85% and 99.68% reductions in the growth of C. albicans M207 and S470, respectively, at 24 h of incubation. SEM revealed a switch from the biofilm to the yeast mode and a drastic reduction in cell numbers, with mostly clumped or lysed cells. The study will provide an impetus to the development of novel spice extract-based ALT, reducing the selection pressure on the pathogen and lowering antimicrobial resistance. Further research in this area has the potential to leverage clinical applications. Full article