Search Results (140)

The production of bionanocomposite films based on carboxymethyl derivatives of starch and cellulose with sodium montmorillonite (MMT-Na) as a filler was described. The developed films with high absorbency can be used in the preparation of adhesive dressings for wounds oozing as a result of abrasions or tattoos. Carboxymethyl cellulose (CMC), carboxymethyl starch (CMS), and potato starch were used as the raw materials for film manufacturing. Citric acid was used as a crosslinking agent and glycerol as a plasticizer. The following parameters were evaluated for the obtained films: solubility in water, swelling behavior, moisture absorption, and mechanical durability (tensile strength, elongation at break, and Young’s modulus). This study revealed that filler concentration has a significant influence on the stability, durability, and moisture absorption parameters of films. The best nanocomposite with a high absorption capacity was a two-component film CMS/CMC containing 5 pph of sodium montmorillonite and can be used as a base material for wound dressing, among other applications. Full article

Fruit and vegetable production is often impacted by microbial pathogens that compromise the quality of produce and lead to significant economic losses at the postharvest stages. Due to their efficacy, agrochemicals are widely applied in disease management; nevertheless, this practice has led to the appearance of microbial strains resistant to these types of agrochemicals. Additionally, there is growing concern among consumers about the presence of these chemical residues in fruits and the negative impacts they cause on multiple ecosystems. In response, there is a growing need for safe, effective, green, and sustainable disease control technologies. Bionanocomposites, with their unique ability to combine nanomaterials and biopolymers that have attractive properties, represents a promising alternative for postharvest disease control. These technologies allow for the development of functional coatings and films with antimicrobial, antioxidant, and barrier properties, which are critical for extending shelf life and preserving fruit quality. Recent advances have demonstrated that integrating nanoparticles, such as ZnO, TiO₂, Ag, and chitosan-based nanosystems, into biopolymeric matrices, like alginate, pectin, starch, or cellulose, can enhance mechanical strength, regulate gas exchange, and control the release of active agents. This review presents systematized information that is focused on the creation of coatings and films based on bionanocomposites for the management of disease in fruits and vegetables. It also discusses the use of diverse biopolymers and nanomaterials and their impact on the quality and shelf life of fruits and vegetables. Full article

Bio-nanocomposite films were prepared using chitosan, gelatin, and varying concentrations (0, 0.5, 1.0, 2.0, and 5.0 wt%) of titanium dioxide (TiO₂) nanoparticles in acetic acid via a casting method. The incorporation of TiO₂ nanoparticles into the bio-chitosan matrix enhanced ultraviolet (UV) absorption and improved the films’ physical, mechanical, and electrical properties. Additionally, the TiO₂-loaded films exhibited antimicrobial activity, contributing to the extended preservation of packaged products by inhibiting microbial growth. Notably, the bio-nanocomposite films containing 1.0 wt% TiO₂ exhibited an electroactive response, bending under relatively low electric field strength (250 V/mm), whereas the control film without TiO₂ required higher field strength (550 V/mm) to achieve bending. This indicates potential applications in electroactive actuators requiring precise movement control. Among the tested concentrations, films containing 0.5 wt% and 1.0 wt% TiO₂ (Formulas 7 and 8) demonstrated optimal performance. These films presented a visually appealing appearance with no tear marks, low bulk density (0.91 ± 0.04 and 0.85 ± 0.18 g/cm³), a satisfactory electromechanical response at 250 V/m (17.85 ± 2.58 and 61.48 ± 6.97), low shrinkage percentages (59.95 ± 3.59 and 54.17 ± 9.28), high dielectric constant (1.80 ± 0.07 and 8.10 ± 0.73), and superior UV absorption compared with pure bio-chitosan films, without and with gelatin (Formulas 1 and 6). Full article

As the global plastic pollution problem intensifies and the environmental hazards of traditional petroleum-based plastics become increasingly significant, the development of sustainable alternative materials has become an urgent need. This paper systematically reviews the research progress, application status and future trends of new generation bioplastics in the field of food packaging. Bioplastics are categorized into three main groups according to their sources and degradability: biobased biodegradable materials (e.g., polylactic acid PLA, polyhydroxy fatty acid ester PHA, chitosan, and cellulose-based materials); biobased non-biodegradable materials (e.g., Bio-PE, Bio-PET); and non-biobased biodegradable materials (e.g., PBAT, PCL, PBS). Different processing technologies, such as thermoforming, injection molding, extrusion molding and coating technologies, can optimize the mechanical properties, barrier properties and freshness retention of bioplastics and promote their application in scenarios such as food containers, films and smart packaging. Although bioplastics still face challenges in terms of cost, degradation conditions and industrial support, promising future directions are found in the development of the large-scale utilization of non-food raw materials (e.g., agricultural waste, algae), nano-composite technology to enhance the performance, and the development of intelligent packaging functions. Through technological innovation and industry chain integration, bioplastics are expected to transform from an environmentally friendly alternative to a mainstream packaging material, helping to realize the goal of global carbon neutrality. Full article

This study reports on the fabrication of chitosan-zein films decorated with silver nanoparticles synthesized via a green and eco-friendly approach using an extract of Bergenia ciliata. The strong reducing ability and caping properties of the phytochemicals present in the extract enabled the formation of silver nanoparticles with an average diameter of ~40 nm without any external reducing agent and stabilizer. The uniformly distributed Ag nanoparticles were embedded in the chitosan-zein matrix. The structural and morphological characteristics of the film were analyzed via Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffractometry, scanning electron microscopy, and transmission electron microscopy. The silver nanoparticles decorated with chitosan-zein films showed thermal stability, durability, and excellent antimicrobial activities. This finding demonstrates a sustainable and green pathway for developing multifunctional nanocomposite films, contributing to the advancement of bio-based materials for prospective therapeutic applications and active food packaging. Full article

As the global plastic pollution crisis intensifies, the development of sustainable food packaging materials has become a priority. Starch-based films present a viable, biodegradable alternative to petroleum-derived plastics but face challenges such as poor moisture resistance and mechanical fragility. This review comprehensively examines state-of-the-art advancements in starch-based packaging, including polymer modifications, bio-nanocomposite incorporation, and innovative processing techniques that enhance functionality. Furthermore, the role of advanced analytical tools in elucidating the structure–performance relationships of starch films is highlighted. In particular, we provide an in-depth exploration of advanced characterization techniques, not only to assess starch-based food packaging but also to monitor starch retrogradation, including Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), nuclear magnetic resonance (NMR), and iodine binding (Blue Value). We also explore cutting-edge developments in active and intelligent packaging, where starch films are functionalized with bioactive compounds for antimicrobial protection and freshness monitoring. While substantial progress has been made, critical challenges remain in upscaling these technologies for industrial production. This review provides a roadmap for future research and the industrial adoption of starch-derived packaging solutions. Full article

Polybenzoxazines (PBzs), a class of high-performance thermosetting polymers, have gained significant attention for their exceptional thermal stability, mechanical properties, and chemical resistance, making them ideal for aerospace, electronics, and biomedical applications. Recent advancements emphasize their antimicrobial potential, attributed to unique structural properties and the ability to incorporate bio-active functional groups. This review highlights the synthesis, antimicrobial mechanisms, and applications of PBzs and their bio-based derivatives, focusing on sustainable materials science. PBzs demonstrate antimicrobial efficacy through mechanisms such as hydrophobic surface interactions and reactive functional group formation, preventing microbial adhesion and biofilm development. The incorporation of functional groups like amines, quaternary ammonium salts, and phenolic moieties disrupts microbial processes, enhancing antimicrobial action. Modifications with metal nanoparticles, organic agents, or natural bio-actives further augment these properties. Notable bio-based benzoxazines include derivatives synthesized from renewable resources like curcumin, vanillin, and eugenol, which exhibit substantial antimicrobial activity and environmental friendliness. Hybrid PBzs, combining natural polymers like chitosan or cellulose, have shown improved antimicrobial properties and mechanical performance. For instance, chitosan-PBz composites significantly inhibit microbial growth, while cellulose blends enhance film-forming capabilities and thermal stability. PBz nanocomposites, incorporating materials like silver nanoparticles, present advanced applications in biomedical and marine industries. Examples include zirconia-reinforced composites for dental restoration and urushiol-based PBzs for eco-friendly antifouling solutions. The ability to customize PBz properties through molecular design, combined with their inherent advantages such as flame retardancy, low water absorption, and excellent mechanical strength, positions them as versatile materials for diverse industrial and medical applications. This comprehensive review underscores the transformative potential of PBzs in addressing global challenges in antimicrobial material science, offering sustainable and multifunctional solutions for advanced applications. Full article

This study aimed to develop and characterize bio-nanocomposite coatings by incorporating titanium nanoparticles (TiO₂ NPs) (30–50 nm) (10 mg/L), which have antimicrobial effects, and rosmarinic acid (RA) (0.005 mg/mL), which has strong antioxidant and antimicrobial activities, into the chitosan matrix using the solvent casting method. The prepared bio-nanocomposite coatings were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM-EDX), and atomic force microscopy (AFM). In the XRD analysis, the crystal structure of the bio-nanocomposite coating material was evaluated, but the absence of the expected TiO₂ NPs diffraction peak in the coating containing TiO₂ NPs was discussed in detail. The TiO₂ NPs decreased the crystallinity, compared to the control film, while rosmarinic acid increased the order of the molecular matrix. FT-IR analysis showed the presences of O–H, C=O, and C–O bonds in the coating materials, and the changes in the positions and intensities of the bands observed in the FTIR spectra of the bio-nanocomposite coatings (CHT and CHTRA) proved that TiO₂ NPs and RA were successfully integrated into the chitosan matrix. The broadening and flattening of the bands belonging to OH groups (3288–3356 cm⁻¹) indicated that the hydrogen bonds in the chitosan matrix were strengthened during the formation of the bio-nanocomposite structure. The bands representing the C=O stretching vibrations at 1659 cm⁻¹ (amide I) and the N–H bending vibrations at 1558 cm⁻¹ (amide II) indicated protein-based features in the structure of chitosan and confirmed the existence of the bio-nanocomposite structure. The SEM-EDX analysis showed that TiO₂ NPs were distributed homogeneously on the chitosan surface, but there was aggregation in places. The AFM images revealed that when TiO₂ NPs and RA were added to the chitosan matrix, the surface topography became more homogeneous, and a topographic pattern was formed in the range of 0–20.4 nm. Therefore, it is concluded that these bio-nanocomposite coatings can be used in antimicrobial surfaces and food packaging areas and should be optimized with different antioxidant and nanoparticle combinations in the future. Full article

Novel AB-Polybenzimidazole (AB-PBI)/TiO₂ nanocomposite membranes have been prepared using a synthetic green chemistry approach. Modified Eaton’s reagent (methansulfonic acid/P₂O₅) was used as both reaction media for microwave-assisted synthesis of AB-PBI and as an efficient dispersant of partially agglomerated titanium dioxide powders. Composite membranes of 80 µm thickness have been prepared by a film casting approach involving subsequent anti-solvent inversion in order to obtain porous composite membranes possessing high sorption capacity. The maximal TiO₂ filler content achieved was 20 wt.% TiO₂ nanoparticles (NPs). Titania particles were green synthesized (using a different content of Mentha Spicata (MS) aqueous extract) by hydrothermal activation (150 °C), followed by thermal treatment at 400 °C. The various methods such as powder X-ray diffraction and Thermogravimetric analyses, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and Energy-dispersive X-ray spectroscopy, Electronic paramagnetic resonance, Scanning Electron Microscopy and Transmission Electron Microscopy have been used to study the phase and surface composition, structure, morphology, and thermal behavior of the synthesized nanocomposite membranes. The photocatalytic ability of the so-prepared AB-Polybenzimidazole/bio-TiO₂ membranes was studied for decolorization of Reactive Black 5 (RB5) as a model azo dye pollutant under UV light illumination. The polymer membrane in basic form, containing TiO₂ particles, was obtained with a 40 mL quantity of the MS extract, exhibiting the highest decolorization rate (96%) after 180 min of UV irradiation. The so-prepared AB-Polybenzimidazole/TiO₂ samples have a powerful antibacterial effect on E. coli when irradiated by UV light. Full article

The escalating environmental concerns associated with conventional plastic packaging have accelerated the development of sustainable alternatives, making food packaging a focus area for innovation. Bioplastics, particularly polyhydroxyalkanoates (PHAs), have emerged as potential candidates due to their biobased origin, biodegradability, and biocompatibility. PHAs stand out for their good mechanical and medium gas permeability properties, making them promising materials for food packaging applications. In parallel, zinc oxide (ZnO) nanoparticles (NPs) have gained attention for their antimicrobial properties and ability to enhance the mechanical and barrier properties of (bio)polymers. This review aims to provide a comprehensive introduction to the research on PHA/ZnO nanocomposites. It starts with the importance and current challenges of food packaging, followed by a discussion on the opportunities of bioplastics and PHAs. Next, the synthesis, properties, and application areas of ZnO NPs are discussed to introduce their potential use in (bio)plastic food packaging. Early research on PHA/ZnO nanocomposites has focused on solvent-assisted production methods, whereas novel technologies can offer additional possibilities with regard to industrial upscaling, safer or cheaper processing, or more specific incorporation of ZnO NPs in the matrix or on the surface of PHA films or fibers. Here, the use of solvent casting, melt processing, electrospinning, centrifugal fiber spinning, miniemulsion encapsulation, and ultrasonic spray coating to produce PHA/ZnO nanocomposites is explained. Finally, an overview is given of the reported effects of ZnO NP incorporation on thermal, mechanical, gas barrier, UV barrier, and antimicrobial properties in ZnO nanocomposites based on poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate). We conclude that the functionality of PHA materials can be improved by optimizing the ZnO incorporation process and the complex interplay between intrinsic ZnO NP properties, dispersion quality, matrix–filler interactions, and crystallinity. Further research regarding the antimicrobial efficiency and potential migration of ZnO NPs in food (simulants) and the End-of-Life will determine the market potential of PHA/ZnO nanocomposites as active packaging material. Full article

Nowadays, plastic contamination worldwide is a concerning reality that can be addressed with appropriate society education as well as looking for innovative polymeric alternatives based on the reuse of waste and recycling with a circular economy point of view, thus taking into consideration that a future world without plastic is quite impossible to conceive. In this regard, in this review, we focus on sustainable polymeric materials, biodegradable and bio-based polymers, additives, and micro/nanoparticles to be used to obtain new environmentally friendly polymeric-based materials. Although biodegradable polymers possess poorer overall properties than traditional ones, they have gained a huge interest in many industrial sectors due to their inherent biodegradability in natural environments. Therefore, several strategies have been proposed to improve their properties and extend their industrial applications. Blending strategies, as well as the development of composites and nanocomposites, have shown promising perspectives for improving their performances, emphasizing biopolymeric blend formulations and bio-based micro and nanoparticles to produce fully sustainable polymeric-based materials. The Review also summarizes recent developments in polymeric blends, composites, and nanocomposite plasticization, with a particular focus on naturally derived plasticizers and their chemical modifications to increase their compatibility with the polymeric matrices. The current state of the art of the most important bio-based and biodegradable polymers is also reviewed, mainly focusing on their synthesis and processing methods scalable to the industrial sector, such as melt and solution blending approaches like melt-extrusion, injection molding, film forming as well as solution electrospinning, among others, without neglecting their degradation processes. Full article

Developing bio-based and biodegradable materials has become important to meet current market demands, government regulations, and environmental concerns. The packaging industry, particularly for food and beverages, is known to be the world’s largest consumer of plastics. Therefore, the demand for sustainable alternatives in this area is needed to meet the industry’s requirements. This review presents the most commonly used bio-based and biodegradable packaging materials, bio-polyesters, and polysaccharide-based polymers. At the same time, a major problem in food packaging is presented: fungal growth and, consequently, food spoilage. Different types of antifungal compounds, both natural and synthetic, are explained in terms of structure and mechanism of action. The main uses of these antifungal compounds and their degree of effectiveness are detailed. State-of-the-art studies have shown a clear trend of increasing studies on incorporating antifungals in biodegradable materials since 2000. The bibliometric networks showed studies on active packaging, biodegradable polymers, films, antimicrobial and antifungal activities, essential oils, starch and polysaccharides, nanocomposites, and nanoparticles. The combination of the development of bio-based and biodegradable materials with the ability to control fungal growth promotes both sustainability and the innovative enhancement of the packaging sector. Full article

Bio-based and biodegradable polyhydroxyalkanoates (PHAs) have great potential as sustainable packaging materials. The incorporation of zinc oxide nanoparticles (ZnO NPs) could further improve their functional properties by providing enhanced barrier and antimicrobial properties, although current literature lacks details on how the characteristics of ZnO influence the structure–property relationships in PHA/ZnO nanocomposites. Therefore, commercial ZnO NPs with different morphologies (rod-like, spherical) and silane surface modification are incorporated into poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) via extrusion and compression molding. All ZnO NPs are homogeneously distributed in the PHBHHx matrix at 1, 3 and 5 wt.%, but finer dispersion is achieved with modified ZnO. No chemical interactions between ZnO and PHBHHx are observed due to a lack of hydroxyl groups on ZnO. The fabricated nanocomposite films retain the flexible properties of PHBHHx with minimal impact of ZnO NPs on crystallization kinetics and the degree of crystallinity (53 to 56%). The opacity gradually increases with ZnO loading, while remaining translucent up to 5 wt.% ZnO and providing an effective UV barrier. Improved oxygen barrier and antibacterial effects against S. aureus are dependent on the intrinsic characteristics of ZnO rather than its morphology. We conclude that PHBHHx retains its favorable processing properties while producing nanocomposite films that are suitable as flexible active packaging materials. Full article

Binary and ternary blends of amylose (AM), polylactic acid (PLA), and glycerol were prepared using a Pickering emulsion approach. Various formulations of AM/PLA with low PLA contents ranging from 3% to 12% were mixed with AM matrix and reinforced with 25% cellulose nanofibers (CNF), and PLA-grafted cellulose nanofibers (g-CNF), the latter to enhance miscibility. Polymeric films were fabricated through solvent casting and characterized using Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and Wide-Angle X-ray Scattering (WAXS), and the evaluations of physical, mechanical properties, and wettability were performed using contact angle measurements. The binary blends of AM and PLA produced films suitable for packaging, pharmaceutical, or biomedical applications with excellent water barrier properties. The ternary blends of AM/CNF/PLA and AM/g-CNF/PLA nanocomposite films demonstrated enhanced tensile strength and reduced water permeability compared to AM/PLA films. Adding g-CNF resulted in better homogeneity and increased relative crystallinity from 33% to 35% compared to unmodified CNF. The application of Pickering emulsion in creating AM-based CNF/ PLA composites resulted in a notable enhancement in tensile strength by 47%. This study presents an effective approach for producing biodegradable and reinforced PLA-based nanocomposite films, which show promise as bio-nanocomposite materials for food packaging applications. Full article

The enormous potential of renewable bioresources is expected to play a key role in the development of the EU’s sustainable circular economy. In this context, inexhaustible, biodegradable, non-toxic, and carbon-neutral forest-origin resources are very attractive for the development of novel sustainable products. The main structural component of wood is cellulose, which, in turn, is the feedstock of nanocellulose, one of the most explored nanomaterials. Different applications of nanocellulose have been proposed, including packaging, functional coatings, insulating materials, nanocomposites and nanohybrids manufacturing, among others. However, the intrinsic flammability of nanocellulose restricts its use in some areas where fire risk is a concern. This paper overviews the most recent studies of the fire resistance of nanocellulose-based materials, focusing on thin films, coatings, and aerogels. Along with effectiveness, increased attention to sustainable approaches is considered in developing novel fire-resistant coatings. The great potential of bio-based fire-resistant materials, combined with conventional non-halogenated fire retardants (FRs), has been established. The formulation methods, types of FRs and their action modes, and methods used for analysing fireproof are discussed in the frame of this overview. Full article