Search Results (428)

In this study, a highly cadmium (II)-resistant bacterium strain, C10-4, identified as Bacillus altitudinis, was isolated from a sediment sample collected from Baiyangdian Lake, China. The minimum inhibitory concentration (MIC) of Cd(II) for strain C10-4 was 1600 mg/L. Factors such as the contact time, pH, Cd(II) concentration, and biomass dosage affected the adsorption of Cd(II) by strain C10-4. The adsorption process fit well to the Langmuir adsorption isotherm model and the pseudo-second-order kinetics model, based on the Cd(II) adsorption data obtained from the cells of strain C10-4. This suggests that Cd(II) is adsorbed by strain C10-4 cells via a single-layer homogeneous chemical adsorption process. According to the Langmuir model, the maximum biosorption capacity was 3.31 mg/g for fresh-strain C10-4 biomass. Cd(II) was shown to adhere to the bacterial cell wall through SEM-EDS analysis. FTIR spectroscopy further indicated that the main functional sites for the binding of Cd(II) ions on the cell surface of strain C10-4 were functional groups such as N-H, -OH, -CH-, C=O, C-O, P=O, sulfate, and phosphate. After the inoculation of strain C10-4 into Cd(II)-contaminated soils, there was a significant reduction (p < 0.01) in the exchangeable fraction of Cd and an increase (p < 0.01) in the sum of the reducible, oxidizable, and residual fractions of Cd. The results show that Bacillus altitudinis C10-4 has good potential for use in the remediation of Cd(II)-contaminated soils. Full article

Heavy metal-contaminated soil poses a severe threat to environmental quality and human health, calling for eco-friendly and efficient remediation strategies. This study explored the use of biochar-immobilized copper-resistant Pseudomonas aeruginosa to remediate copper-contaminated soil and promote growth of Chinese milk vetch (Astragalus sinicus L.). Indoor pot experiments compared four groups: copper-contaminated soil (control), soil with biochar, soil with free bacteria, and soil with biochar-immobilized bacteria (IM). Results showed IM had the most significant effects on soil properties: it raised pH to 7.04, reduced bioavailable copper by 34.37%, and increased catalase (3.48%) and urease (78.95%) activities. IM also altered soil bacterial communities, decreasing their richness and evenness (alpha diversity) while shifting community composition. For Chinese milk vetch, IM reduced leaf malondialdehyde (a marker of oxidative stress) by 15%, increased total dry weight by 90%, and lowered copper accumulation in roots (18.62%) and shoots (60.33%). As a nitrogen-fixing plant, the vetch’s nitrogen fixation in roots and shoots rose by 82.70% and 57.08%, respectively, under IM. These findings demonstrate that biochar-immobilized Pseudomonas aeruginosa is a promising in situ amendment for remediating copper-contaminated soil and boosting plant growth. Full article

Soil salinity adversely affects crop growth and development, leading to reduced soil fertility and agricultural productivity. The indigenous salt-tolerant plant growth-promoting rhizobacteria (PGPR), as a sustainable microbial resource, do not only promote growth and alleviate salt stress, but also improve the soil microecology of crops. The strain H5 isolated from saline-alkali soil in Bachu of Xinjiang was studied through whole-genome analysis, functional annotation, and plant growth-promoting, salt-tolerant trait gene analysis. Phylogenetic tree analysis and 16S rDNA sequencing confirmed its classification within the genus Halomonas. Functional annotation revealed that the H5 genome harbored multiple functional gene clusters associated with plant growth promotion and salt tolerance, which were critically involved in key biological processes such as bacterial survival, nutrient acquisition, environmental adaptation, and plant growth promotion. The pot experiment under moderate salt stress demonstrated that seed inoculation with Halomonas sp. H5 not only significantly improved the agronomic traits of tomato seedlings, but also increased plant antioxidant enzyme activities under salt stress. Additionally, soil analysis revealed H5 treatment significantly decreased the total salt (9.33%) and electrical conductivity (8.09%), while significantly improving organic matter content (11.19%) and total nitrogen content (10.81%), respectively (p < 0.05). Inoculation of strain H5 induced taxonomic and functional shifts in the rhizosphere microbial community, increasing the relative abundance of microorganisms associated with plant growth-promoting and carbon and nitrogen cycles, and reduced the relative abundance of the genera Alternaria (15.14%) and Fusarium (9.76%), which are closely related to tomato diseases (p < 0.05). Overall, this strain exhibits significant potential in alleviating abiotic stress, enhancing growth, improving disease resistance, and optimizing soil microecological conditions in tomato plants. These results provide a valuable microbial resource for saline soil remediation and utilization. Full article

The heavy metal contamination of soils is a global environmental challenge threatening water quality, food safety, and human health. Using a systematic literature review approach, this study aimed to assess the potential of bacterial strains to immobilize cadmium (Cd²⁺), lead (Pb²⁺), and copper (Cu²⁺) in contaminated soils. A total of 45 articles were analyzed, focusing on studies that reported heavy metal concentrations before and after bacterial treatment. The analysis revealed that bacterial genera such as Bacillus, Pseudomonas, and Enterobacter were most commonly used for the immobilization of these metals. Immobilization efficiencies ranged from 25% to over 98%, with higher efficiencies generally observed when microbial consortia or amendments (e.g., phosphate compounds and biochar) were applied. The main immobilization mechanisms included biosorption, bioprecipitation (such as carbonate-induced precipitation), bioaccumulation, and biomineralization, which convert mobile metal ions into more stable, less bioavailable forms. These findings highlight the promising role of microbial-assisted immobilization in mitigating heavy metal pollution and reducing ecological risks. Further laboratory and field studies are needed to optimize the use of these microbial strains under site-specific conditions to ensure effective and sustainable soil remediation practices. Full article

This study investigated the effects of reduced nitrogen combined with an organic fertilizer on maize yield, soil microbial communities, and enzyme activities to optimize fertilization strategies. A field experiment on cinnamon soil in Yuncheng, Shanxi, was conducted and included six treatments: no fertilizer (CK), conventional N (NC0, 180 kg N/ha), sole organic fertilizer (CN0, 3000 kg/ha), and reduced-N + organic fertilizer (CN1: 90 kg N/ha + 3000 kg/ha; CN2: 135 kg N/ha + 3000 kg/ha; and CN3: 180 kg N/ha + 3000 kg/ha). We analyzed yield components, soil nutrients, urease and invertase activities, and bacterial community structure (16S rRNA sequencing). The key results are as follows: CN1 achieved the highest yield (9764.87 kg/ha), which was 46.8% higher than CK. CN2 maintained comparable yields while delivering higher enzyme activities and microbial abundance, positioning this strategy as suitable for soil remediation. Co-application enriched two beneficial phyla, Proteobacteria and Planctomycetota (19% in CN2), with Proteobacteria positively correlating with urease activity and alkali-hydrolyzable N (p < 0.05), while Verrucomicrobiota negatively correlated with urease activity. In conclusion, 25–50% N reduction with an organic fertilizer (3000 kg/ha) synergistically enhances yield, soil enzymes, and beneficial microbiota, supporting sustainable high-yield agriculture with improved soil fertility. Full article

Petroleum-contaminated soil is an increasingly severe environmental issue. The integration of phytoremediation and microbial remediation can effectively mitigate their individual limitations and enhance remediation efficiency. In this study, four newly isolated bacterial strains (including Cytobacillus and Rhodococcus) that exhibited preferential degradation of distinct petroleum components were combined with the rhamnolipid-producing strain Pseudomonas aeruginosa SL-1. The immobilization of this petroleum-degrading microbial consortium was performed by biochar adsorption and sodium alginate embedding, subsequently optimized using response surface methodology (0.75 g·L⁻¹ of biochar, 40 g·L⁻¹ of sodium alginate, and 40 g·L⁻¹ of calcium chloride). The results showed that the highest petroleum degradation rate (97.1%) of immobilized bacterial consortium was achieved at 72 h at a petroleum concentration of 5.0 g·L⁻¹. When combined with Sudan grass for soil bioremediation, the degradation rate reached 72.8% after 120 d for soil containing 5.0 g·kg⁻¹ of petroleum, higher than the results for the treatments with only immobilized bacterial consortium (53.0%) or Sudan grass (49.2%). Furthermore, significant improvements were observed for soil pH; nitrogen, phosphorus, and potassium contents; and urease, dehydrogenase, and catalase activities. Composite treatment also significantly increased the diversity and richness of the soil bacterial community and regulated its structure, function, and network composition. This study offers theoretical insights and potential practical applications for the enhanced bioremediation of petroleum-contaminated soils. Full article

Soil contamination with petroleum hydrocarbons is a serious environmental issue, necessitating the development of effective and environmentally friendly remediation methods that align with the principles of sustainable development. This study investigated the impact of selected biosurfactants on the efficiency of the biodegradation of total petroleum hydrocarbons (TPH) and polycyclic aromatic hydrocarbons (PAHs) in contaminated soil. Six biosurfactants—poly-γ-glutamic acid (γ-PGA), rhamnolipid, surfactin, a mixture of γ-PGA, rhamnolipids, and surfactin (PSR), as well as two commercial formulations (JBR 425 and JBR 320)—were evaluated in combination with a bacterial consortium. Biodegradation experiments were conducted under laboratory conditions for a 90-day period. The effectiveness of the tested biosurfactants was assessed using respirometric analysis, the chromatographic determination of the residual hydrocarbon content, and toxicity assays. The results showed that the application of a bacterial consortium enriched with a mixture of biosurfactants PSR (a biosurfactant concentration in the inoculating mixture: 5 g/dm³) was the most effective approach, resulting in an oxygen uptake of 5164.8 mgO₂/dm³ after 90 days, with TPH and PAH degradation rates of 77.3% and 70.32%, respectively. Phytotoxicity values decreased significantly, with TU values ranging from 6.32 to 4.62 (growth inhibition) and 3.77 to 4.13 (germination). Toxicity also decreased in the ostracodtoxkit test (TU = 4.35) and the Microtox SPT test (TU = 4.91). Among the tested biosurfactants, surfactin showed the least improvement in its bioremediation efficiency. Under the same concentration as in the PSR mixture, the oxygen uptake was 3446.7 mgO₂/dm³, with TPH and PAH degradation rates of 60.64% and 52.64%, respectively. In the system inoculated with the bacterial consortium alone (without biosurfactants), the biodegradation efficiency reached 44.35% for TPH and 36.97% for PAHs. The results demonstrate that biosurfactants can significantly enhance the biodegradation of petroleum hydrocarbons in soil, supporting their potential application in sustainable bioremediation strategies. Full article

Honey, propolis or royal jelly are considered natural remedies with therapeutic properties since antiquity. Many papers explore the development of antimicrobial biomaterials based on individual bee products, but there is a lack of studies on their synergistic effects. Combining honey, propolis and royal jelly with silver nanoparticles in a biopolymer matrix offers a synergistic strategy to combat antibiotic-resistant bacterial infections. This approach supports progress in wound healing, soft tissue engineering and other domains where elimination of the microorganisms is needed like food packaging. In this study we have obtained antimicrobial films based on bee products and silver nanoparticles (AgNPs) incorporated in an alginate–chitosan blend. The novel biomaterials were analyzed by UV-Vis, fluorescence and FTIR spectroscopy or microscopy, SEM and thermal analysis. Antibacterial tests were conducted against both Gram-positive and Gram-negative bacteria, while the antifungal properties were tested against Candida albicans. The diameters for growth inhibition zones were up to 10 mm for bacterial strains and 8 mm for the fungal strain. Additionally, cytotoxicity assays were performed to evaluate the biocompatibility of the materials, the results indicating that the combination of honey, propolis, royal jelly and AgNPs does not produce synergistic toxicity. Full article

Organohalide-respiring bacteria (OHRB) facilitate the reductive dehalogenation of toxic halogenated compounds in the environment, which supports their growth and proliferation. Research conducted on OHRB has achieved notable advancements. However, given the intricacy of the ecosystem and the methodologies employed for microbial isolation, numerous constraints persist. Further exploration is imperative to elucidate the physiological characteristics, ecological functions, and technological applications of OHRB. This study aimed to evaluate the outcomes and insights of prior research via a bibliometric analysis of three obligate OHRB genera—Dehalococcoides, Dehalobacter, and Dehalogenimonas—over a three-decade period from 1994 to 2024, based on the Web of Science (WOS) database. The results show that research on these three bacterial genera has advanced in sequence since the initiation of studies in this field. The research area encompasses the identification and isolation of novel OHRB species, the gene sequencing of related enzymes, and the role of microorganisms in the remediation of environmental pollutants, reflecting a gradual transition from individual investigations of OHRB to the applications of microorganisms in remediating complex environmental pollution. This study systematically reviewed the past research history of this field and conducted an in-depth analysis of research hotspots. The integration of this analysis with technological development trends and practical application requirements provides a theoretical basis and innovative concepts for future research directions in the field of ecological environment restoration. Full article

Petroleum-derived contaminants pose a significant threat to the soil microbiome. Therefore, it is essential to explore materials and techniques that can restore homeostasis in disturbed environments. The aim of the study was to assess the response of the soil microbiome to contamination with diesel oil (DO) and gasoline (G) and to determine the capacity of sorbents, vermiculite (V), dolomite (D), perlite (P) and agrobasalt (A), to enhance the activity of microorganisms under Zea mays cultivation conditions in pot experiments. The restoration and activity of the soil microbiome were evaluated based on the abundance and diversity of bacteria and fungi, using both classical microbiological methods and Next Generation Sequencing (NGS). Bioinformatic tools were employed to calculate the physicochemical properties of proteins. DO increased the abundance of cultured microorganisms, whereas G significantly reduced it. Both DO and G increased the number of ASVs of Proteobacteria and decreased the relative abundance of Gemmatimonadetes, Chloroflexi, Acidobacteria, Verrucomicrobia, Planctomycetes, and fungal OTUs. These contaminants stimulated the growth of bacteria from the genera Rhodanobacter, Sphingomonas, Burkholderia, Sphingobium, and Mycobacterium, as well as fungi belonging to the Penicillium genus. Conversely, they had a negative effect on Kaistobacter, Rhodoplanes, and Ralstonia, as well as the fungi Chaetomium, Pseudaleuria, and Mortierella. DO caused greater changes in microbial alpha diversity than G. The stability of microbial proteins was higher at 17 °C than at −1 °C. The most stable proteins were found in bacteria and fungi identified within the core soil microbiome. These organisms exhibited greater diversity and more compact RNA secondary structures. The application of sorbents to contaminated soil altered the composition of bacterial and fungal communities. All sorbents enhanced the growth of organotrophic bacteria (Org) and fungi (Fun) in DO-contaminated soils, and actinobacteria (Act) and fungi in G-contaminated soils. V and A had the most beneficial effects on cultured microorganisms. In DO-contaminated soils, all sorbents inhibited the growth of Rhodanobacter, Parvibaculum, Sphingomonas, and Burkholderia, while stimulating Salinibacterium and Penicillium. In G-contaminated but otherwise unamended soils, all sorbents negatively affected the growth of Burkholderia, Sphingomonas, Kaistobacter, Rhodoplanes, Pseudonocardia, and Ralstonia and increased the abundance of Gymnostellatospora. The results of this study provide a valuable foundation for developing effective strategies to remediate soils contaminated with petroleum-derived compounds. Full article

Biochar has demonstrated effectiveness in environmental remediation. However, the physicochemical properties of biochar change with natural aging, which potentially impacts its efficacy. This study was designed to evaluate the effects of aged biochar (at 1% and 5% rates) on the growth of Chinese cabbage, greenhouse gas emission, and Cd remediation in soils. Canada goldenrod (Solidago canadensis L.) feedstock biochar was subjected to three artificial aging processes (freeze–thaw cycle, dry–wet cycle, and hydrogen peroxide oxidation) to prepare aged biochar. Results showed that aging significantly altered properties and structure of biochar. Biochar addition had no effect on CH₄ emissions, but it decreased cumulative N₂O emission (all treatments) and increased cumulative CO₂ emission (only the pristine biochar at 5% application rate). Aged biochar showed no effect on microbial life strategy and Shannon index. However, PB-5% application shifted the life history strategies of A-strategists (resource acquisition microbe) towards Y-strategists (high-yield microbe) such as Proteobacteria, Gemmatimonadota, Bacteroidota, Firmicutes and Actinobacteriota, which partially attributed to the enhanced soil CO₂ emission. Aged biochar reduced plant uptake Cd and soil available Cd concentrations by up to 36.6% and 34.0%, respectively, ascribing to improved soil physicochemical properties and functional bacterial abundance. Full article

Soil microbial communities are essential for the natural attenuation of organic pollutants, yet their ecological responses under long-term contamination remain insufficiently understood. This study examined the bacterial community structure and the abundance of dechlorinating bacteria at a decommissioned pharmaceutical-chemical site in northern Jiangsu Province, China, where the primary pollutants were dichloromethane, 1,2-dichloroethane, and toluene. Eighteen soil samples from the surface (0.2 m) and deep (2.2 m) layers were collected using a Geoprobe-7822DT system and analyzed for physicochemical properties and microbial composition via 16S rRNA gene amplicon sequencing. The results showed that the bacterial community composition was significantly shaped by the soil pH, moisture content, pollutant type, and depth. Dechlorinating bacteria were detected at all sites but exhibited low relative abundance, with higher concentrations in the surface soils. Desulfuromonas, Desulfitobacterium, and Desulfovibrio were the dominant dechlorinators, while Dehalococcoides appeared only in the deep soils. A network analysis revealed positive correlations between the dechlorinators and BTEX-degrading and fermentative taxa, indicating potential cooperative interactions in pollutant degradation. However, the low abundance of dechlorinators suggests that the intrinsic bioremediation capacity is limited. These findings provide new insights into microbial ecology under complex organic pollution, and support the need for integrated remediation strategies that enhance microbial functional potential in legacy-contaminated soils. Full article

Nanocellulose obtained from renewable and abundant biomass has garnered significant attention as a sustainable material with exceptional properties and diverse applications. This review explores the key aspects of nanocellulose, focusing on its extraction methods, applications, and future prospects. The synthesis of nanocellulose involves mechanical, chemical, and biological techniques, each uniquely modifying the cellulose structure to isolate cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs), or bacterial nanocellulose (BNC). These methods provide tailored characteristics, enabling applications across a wide range of industries. Nanocellulose’s remarkable properties, including high mechanical strength, large surface area, thermal stability, and biodegradability, have propelled its use in packaging, electronics, biomedicine, and environmental remediation. It has shown immense potential in enhancing the mechanical performance of composites, improving water purification systems, and serving as a scaffold for tissue engineering and drug delivery. However, challenges related to large-scale production, functionalization, regulatory frameworks, and safety concerns persist, necessitating further research and innovation. This review emphasizes the need for sustainable production strategies and advanced functionalization techniques to harness nanocellulose’s full potential. As an eco-friendly, high-performance material, nanocellulose presents a promising avenue for addressing global sustainability challenges while offering transformative solutions for various industries. Full article

Salvia miltiorrhiza is a traditional herbal remedy for cardiovascular diseases and is in high demand in the market. Excessive chemical fertilizer application, resulting from unscientific fertilization practices, reduced the tanshinone content in S. miltiorrhiza roots. This study investigated how different fertilization types alter the endophytic microbial community composition of S. miltiorrhiza through field experiments, aiming to understand how fertilization affects its medicinal quality. The results showed that root fertilizers (F1) significantly increased root biomass and tanshinone I content, whereas foliar fertilizers (F2) increased tanshinone IIA content. High-throughput sequencing further revealed that F2 treatment significantly decreased the Shannon index of endophytic bacteria while significantly increasing the Shannon index of endophytic fungi. Co-occurrence network analysis revealed that fertilization significantly altered fungal community complexity and modularity, with F1 increasing network nodes and edges. Variance partitioning analysis indicated fungal diversity more strongly influenced medicinal compound levels under F2 and a combination of both (F3) than bacterial diversity. Septoria and Gibberella were positively correlated with tanshinone I and cryptotanshinone content under F2 treatment, respectively. Notably, the unique strains were isolated from different fertilization treatments for subsequent bacterial fertilizer development. These findings elucidate microbial responses to fertilization, guiding optimized cultivation for improved S. miltiorrhiza quality. Full article

Laccase, a member of the blue multicopper oxidase family, is widely distributed across diverse taxonomic groups, including fungi, bacteria, plants, and insects. This enzyme drives biocatalytic processes through the oxidation of phenolic compounds, aromatic amines, and lignin derivatives, underpinning its significant potential in the food industry, cosmetics, and environmental remediation. However, wild-type laccases face critical limitations, such as low catalytic efficiency, insufficient expression yields, and poor stability. To address these bottlenecks, this review systematically examines optimization strategies for heterologous laccase expression by fungal and bacterial systems. Additionally, we discuss protein engineering for laccase modification, with a focus on the structural basis and active-site redesign. The comprehensive analysis presented herein provides strategic suggestions for advancing laccase engineering, ultimately establishing a theoretical framework for developing high-efficiency, low-cost engineered variants for large-scale biomanufacturing and green chemistry applications. Full article