Sign in to use this feature.

Years

Between: -

Subjects

remove_circle_outline
remove_circle_outline
remove_circle_outline
remove_circle_outline
remove_circle_outline
remove_circle_outline
remove_circle_outline
remove_circle_outline
remove_circle_outline

Journals

remove_circle_outline
remove_circle_outline
remove_circle_outline
remove_circle_outline
remove_circle_outline

Article Types

Countries / Regions

remove_circle_outline
remove_circle_outline
remove_circle_outline
remove_circle_outline

Search Results (469)

Search Parameters:
Keywords = asymmetric pressure

Order results
Result details
Results per page
Select all
Export citation of selected articles as:
21 pages, 3570 KiB  
Article
Performance Studies on a Scaled Model of Dual Oscillating-Buoys WEC with One Pneumatic PTO
by Peiyu Liu, Xiang Rao, Bijun Wu, Zhiwen Yuan and Fuming Zhang
Energies 2025, 18(15), 4151; https://doi.org/10.3390/en18154151 - 5 Aug 2025
Abstract
A hybrid wave energy conversion (WEC) system, integrating a backward bent duct buoy (BBDB) with an oscillating buoy (OB) via a flexible mooring chain, is introduced in this study. Unlike existing hybrid WECs, the proposed system dispenses with rigid mechanical linkages and enables [...] Read more.
A hybrid wave energy conversion (WEC) system, integrating a backward bent duct buoy (BBDB) with an oscillating buoy (OB) via a flexible mooring chain, is introduced in this study. Unlike existing hybrid WECs, the proposed system dispenses with rigid mechanical linkages and enables flexible offshore deployment. Flared BBDB and buoy models with spherical, cylindrical, and semi-capsule shapes are designed and tested experimentally in a wave flume using both regular and irregular wave conditions. The effects of nozzle ratio (NR), coupling distance, buoy draft, and buoy geometry are systematically examined to investigate the hydrodynamic performance and energy conversion characteristics. It is found that NR at 110 under unidirectional airflow produces an optimal balance between pressure response, free surface displacement, and energy conversion efficiency. Energy extraction is significantly influenced by the coupling distance, with the hybrid system achieving maximum performance at a specific normalized spacing. The semi-capsule buoy improves power extraction ability and expands effective bandwidth due to asymmetric shape and coupled motion. These findings provide valuable insights into the coupling mechanism and geometric optimization for hybrid WECs. Full article
Show Figures

Figure 1

14 pages, 1469 KiB  
Article
Endothelial Impairment in HIV-Associated Preeclampsia: Roles of Asymmetric Dimethylarginine and Prostacyclin
by Mbuso Herald Mthembu, Samukelisiwe Sibiya, Jagidesa Moodley, Nompumelelo P. Mkhwanazi and Thajasvarie Naicker
Int. J. Mol. Sci. 2025, 26(15), 7451; https://doi.org/10.3390/ijms26157451 (registering DOI) - 1 Aug 2025
Viewed by 175
Abstract
HIV infection and hypertensive disorders of pregnancy (HDP), particularly preeclampsia (PE) with severe features, are leading causes of maternal mortality worldwide. This study investigates the role of asymmetric dimethylarginine (ADMA) and prostacyclin (PGI2) concentrations in endothelial impairment in normotensive pregnant versus PE women [...] Read more.
HIV infection and hypertensive disorders of pregnancy (HDP), particularly preeclampsia (PE) with severe features, are leading causes of maternal mortality worldwide. This study investigates the role of asymmetric dimethylarginine (ADMA) and prostacyclin (PGI2) concentrations in endothelial impairment in normotensive pregnant versus PE women within an HIV endemic setting in KwaZulu-Natal Province, South Africa. The study population (n = 84) was grouped according to pregnancy type, i.e., normotensive (n = 42) and PE (n = 42), and further stratified by HIV status. Clinical factors were maternal age, weight, blood pressure (both systolic and diastolic) levels, and gestational age. Plasma concentrations of ADMA and PGI2 were measured using the enzyme-linked immunoassay (ELISA). Differences in outcomes were analyzed using the Mann–Whitney U and Kruskal–Wallis test together with Dunn’s multiple-comparison post hoc test. The non-parametric data were presented as medians and interquartile ranges. Gravidity, gestational age, and systolic and diastolic blood pressures were significantly different across the study groups where p < 0.05 was deemed significant. Furthermore, the concentration of ADMA was significantly elevated in PE HIV-positive vs. PE HIV-negative (p = 0.0174) groups. PGI2 did not show a significant difference in PE compared to normotensive pregnancies (p = 0.8826) but was significantly different across all groups (p = 0.0212). An increase in plasma ADMA levels was observed in the preeclampsia HIV-negative group compared to the normotensive HIV-negative group. This is linked to the role played by ADMA in endothelial impairment, a characteristic of PE development. PGI2 levels were decreased in PE compared to the normotensive group regardless of HIV status. These findings draw attention to the importance of endothelial indicators in pathogenesis and possibly early prediction of PE development. Full article
Show Figures

Figure 1

33 pages, 3764 KiB  
Article
Cu2+ and Zn2+ Ions Affecting Biochemical Paths and DNA Methylation of Rye (Secale cereale L.) Anther Culture Influencing Plant Regeneration Efficiency
by Wioletta Monika Dynkowska, Renata Orłowska, Piotr Waligórski and Piotr Tomasz Bednarek
Cells 2025, 14(15), 1167; https://doi.org/10.3390/cells14151167 - 29 Jul 2025
Viewed by 150
Abstract
Rye regeneration in anther cultures is problematic and affected by albino plants. DNA methylation changes linked to Cu2+ ions in the induction medium affect reprogramming microspores from gametophytic to sporophytic path. Alternations in S-adenosyl-L-methionine (SAM), glutathione (GSH), or β-glucans and changes in [...] Read more.
Rye regeneration in anther cultures is problematic and affected by albino plants. DNA methylation changes linked to Cu2+ ions in the induction medium affect reprogramming microspores from gametophytic to sporophytic path. Alternations in S-adenosyl-L-methionine (SAM), glutathione (GSH), or β-glucans and changes in DNA methylation in regenerants obtained under different in vitro culture conditions suggest a crucial role of biochemical pathways. Thus, understanding epigenetic and biochemical changes arising from the action of Cu2+ and Zn2+ that participate in enzymatic complexes may stimulate progress in rye doubled haploid plant regeneration. The Methylation-Sensitive Amplified Fragment Length Polymorphism approach was implemented to identify markers related to DNA methylation and sequence changes following the quantification of variation types, including symmetric and asymmetric sequence contexts. Reverse-Phase High-Pressure Liquid Chromatography (RP-HPLC) connected with mass spectrometry was utilized to determine SAM, GSH, and glutathione disulfide, as well as phytohormones, and RP-HPLC with a fluorescence detector to study polyamines changes originating in rye regenerants due to Cu2+ or Zn2+ presence in the induction medium. Multivariate and regression analysis revealed that regenerants derived from two lines treated with Cu2+ and those treated with Zn2+ formed distinct groups based on DNA sequence and methylation markers. Zn2+ treated and control samples formed separate groups. Also, Cu2+ discriminated between controls and treated samples, but the separation was less apparent. Principal coordinate analysis explained 85% of the total variance based on sequence variation and 69% of the variance based on DNA methylation changes. Significant differences in DNA methylation characteristics were confirmed, with demethylation in the CG context explaining up to 89% of the variance across genotypes. Biochemical profiles also demonstrated differences between controls and treated samples. The changes had different effects on green and albino plant regeneration efficiency, with cadaverine (Cad) and SAM affecting regeneration parameters the most. Analyses of the enzymes depend on the Cu2+ or Zn2+ ions and are implemented in the synthesis of Cad, or SAM, which showed that some of them could be candidates for genome editing. Alternatively, manipulating SAM, GSH, and Cad may improve green plant regeneration efficiency in rye. Full article
Show Figures

Figure 1

14 pages, 4627 KiB  
Article
A Numerical Study on the Influence of an Asymmetric Arc on Arc Parameter Distribution in High-Current Vacuum Arcs
by Zaiqin Zhang, Yue Bu, Chuang Wang, Qingqing Gao and Chi Chen
Energies 2025, 18(15), 4025; https://doi.org/10.3390/en18154025 - 29 Jul 2025
Viewed by 184
Abstract
During high-current vacuum arcing, asymmetric arcing with off-center plasma columns may occur due to stochastic discharge initiation and mechanical motion, receiving less research attention than symmetric arcing. The objective of this paper is to numerically analyze the influence law of asymmetric arc ignition [...] Read more.
During high-current vacuum arcing, asymmetric arcing with off-center plasma columns may occur due to stochastic discharge initiation and mechanical motion, receiving less research attention than symmetric arcing. The objective of this paper is to numerically analyze the influence law of asymmetric arc ignition on arc parameters. For 60 mm diameter contacts, three arc conditions of symmetric arcing, 33% arc offset, and 67% arc offset were modeled. The results show that the arc offset causes asymmetry in the arc’s distribution. For 33% offset, the pressure and number density on the side away from the root of the arc is about 50% of root values, while these parameters fall below 20% for the 67% offset. Simultaneously, arc offset elevates peak parameter values: under 33% offset, maxima for ion pressure, ion density, ion temperature, electron temperature, and current density rise 12%, 11%, 6%, 6%, and 14% versus symmetric arcing; during 67% offset, these escalate significantly to 67%, 61%, 12%, 18%, and 47%. This study contributes to providing reference for the analysis of vacuum interruption processes under asymmetric arcing conditions. Full article
(This article belongs to the Special Issue Simulation and Analysis of Electrical Power Systems)
Show Figures

Figure 1

23 pages, 12169 KiB  
Article
Effect of Quasi-Static Door Operation on Shear Layer Bifurcations in Supersonic Cavities
by Skyler Baugher, Datta Gaitonde, Bryce Outten, Rajan Kumar, Rachelle Speth and Scott Sherer
Aerospace 2025, 12(8), 668; https://doi.org/10.3390/aerospace12080668 - 26 Jul 2025
Viewed by 197
Abstract
Span-wise homogeneous supersonic cavity flows display complicated structures due to shear layer breakdown, flow acoustic resonance, and even non-linear hydrodynamic-acoustic interactions. In practical applications, such as aircraft bays, the cavity is of finite width and has doors, both of which introduce distinctive phenomena [...] Read more.
Span-wise homogeneous supersonic cavity flows display complicated structures due to shear layer breakdown, flow acoustic resonance, and even non-linear hydrodynamic-acoustic interactions. In practical applications, such as aircraft bays, the cavity is of finite width and has doors, both of which introduce distinctive phenomena that couple with the shear layer at the cavity lip, further modulating shear layer bifurcations and tonal mechanisms. In particular, asymmetric states manifest as ‘tornado’ vortices with significant practical consequences on the design and operation. Both inward- and outward-facing leading-wedge doors, resulting in leading edge shocks directed into and away from the cavity, are examined at select opening angles ranging from 22.5° to 90° (fully open) at Mach 1.6. The computational approach utilizes the Reynolds-Averaged Navier–Stokes equations with a one-equation model and is augmented by experimental observations of cavity floor pressure and surface oil-flow patterns. For the no-doors configuration, the asymmetric results are consistent with a long-time series DDES simulation, previously validated with two experimental databases. When fully open, outer wedge doors (OWD) yield an asymmetric flow, while inner wedge doors (IWD) display only mildly asymmetric behavior. At lower door angles (partially closed cavity), both types of doors display a successive bifurcation of the shear layer, ultimately resulting in a symmetric flow. IWD tend to promote symmetry for all angles observed, with the shear layer experiencing a pitchfork bifurcation at the ‘critical angle’ (67.5°). This is also true for the OWD at the ‘critical angle’ (45°), though an entirely different symmetric flow field is established. The first observation of pitchfork bifurcations (‘critical angle’) for the IWD is at 67.5° and for the OWD, 45°, complementing experimental observations. The back wall signature of the bifurcated shear layer (impingement preference) was found to be indicative of the 3D cavity dynamics and may be used to establish a correspondence between 3D cavity dynamics and the shear layer. Below the critical angle, the symmetric flow field is comprised of counter-rotating vortex pairs at the front and back wall corners. The existence of a critical angle and the process of door opening versus closing indicate the possibility of hysteresis, a preliminary discussion of which is presented. Full article
(This article belongs to the Section Aeronautics)
Show Figures

Figure 1

18 pages, 9314 KiB  
Article
Damage Mechanism and Modeling of CFRP Laminates Impacted by Single Waterjets: Effect of the Impact Direction
by Naidan Hou, Yulong Li and Ping Liu
Materials 2025, 18(15), 3495; https://doi.org/10.3390/ma18153495 - 25 Jul 2025
Viewed by 244
Abstract
In engineering practice, liquid droplet impingement typically occurs at an oblique angle relative to the target surface, yet the influence of impact orientation on damage outcomes remains contentious and exhibits target-material dependency. In this paper, a typical single-waterjet-generating technique is applied to liquid [...] Read more.
In engineering practice, liquid droplet impingement typically occurs at an oblique angle relative to the target surface, yet the influence of impact orientation on damage outcomes remains contentious and exhibits target-material dependency. In this paper, a typical single-waterjet-generating technique is applied to liquid impact tests on a unidirectional carbon fiber-reinforced polymer (CFRP) laminate, with special focus on the effects of the impingement angle and the fiber orientation. Finite-element simulation is employed to help reveal the failure mechanism of oblique impacts. The results show that, in most cases, the damage caused by a 15° oblique impact is slightly larger than that of a normal impact, while the increase amplitude varies with different impact speeds. Resin removal is more prone to occur when the projection of the waterjet velocity on the impact surface is perpendicular (marked as the fiber orientation PE) rather than parallel (marked as the fiber orientation PA) to the fiber direction of the top layer. A PE fiber orientation can lead to mass material peeling in comparison with PA, and the damage range is even much larger than for a normal impact. The underlying mechanism can be attributed to the increased lateral jet-particle velocity and resultant shear stress along the impact projection direction. The distinct damage modes observed on the CFRP laminate with the different fiber orientations PE and PA originate from the asymmetric tensile properties in the longitudinal/transverse directions of laminates coupled with dissimilar fiber–matrix interfacial characteristics. A theoretical model for the surface damage area under a single-jet impact was established through experimental data fitting based on a modified water-hammer pressure contact-radius formulation. The model quantitatively characterizes the influence of critical parameters, including the jet velocity, diameter, and impact angle, on the central area of the surface failure ring. Full article
(This article belongs to the Section Mechanics of Materials)
Show Figures

Figure 1

25 pages, 7778 KiB  
Article
Pressure Characteristics Analysis of the Deflector Jet Pilot Stage Under Dynamic Skewed Velocity Distribution
by Zhilin Cheng, Wenjun Yang, Liangcai Zeng and Lin Wu
Aerospace 2025, 12(7), 638; https://doi.org/10.3390/aerospace12070638 - 17 Jul 2025
Viewed by 215
Abstract
The velocity distribution at the deflector jet outlet significantly influences the pressure characteristics of the pilot stage, thereby affecting the dynamic performance of the servo valve. Conventional mathematical models fail to account for the influence of dynamic velocity distribution on pilot stage pressure [...] Read more.
The velocity distribution at the deflector jet outlet significantly influences the pressure characteristics of the pilot stage, thereby affecting the dynamic performance of the servo valve. Conventional mathematical models fail to account for the influence of dynamic velocity distribution on pilot stage pressure characteristics, resulting in significant deviations from actual situations. As the deflector shifts, the secondary jet velocity distribution transitions from a symmetric to an asymmetric dynamic profile, altering the pressure within the receiving chambers. To address this, a dynamic skewed velocity distribution model is proposed to more accurately capture the pressure characteristics. The relationship between the skewness coefficient and deflector displacement is established, and the pressure calculation method for the receiving chambers is refined accordingly. A comparative analysis shows that the proposed model aligns most closely with computational fluid dynamics results, achieving a 98% match in velocity distribution and a maximum pressure error of 1.43%. This represents an improvement of 84.98% over the normal model and 82.35% over the uniform model, confirming the superior accuracy of the dynamic skewed model in pilot stage pressure calculation. Full article
(This article belongs to the Special Issue Aerospace Vehicles and Complex Fluid Flow Modelling)
Show Figures

Figure 1

24 pages, 13675 KiB  
Article
Microscopic Investigation of the Effect of Different Wormhole Configurations on CO2-Based Cyclic Solvent Injection in Post-CHOPS Reservoirs
by Sepideh Palizdan, Farshid Torabi and Afsar Jaffar Ali
Processes 2025, 13(7), 2194; https://doi.org/10.3390/pr13072194 - 9 Jul 2025
Viewed by 230
Abstract
Cyclic Solvent Injection (CSI), one of the most promising solvent-based enhanced oil recovery (EOR) methods, has attracted the oil industry’s interest due to its energy efficiency, produced oil quality, and environmental suitability. Previous studies revealed that foamy oil flow is considered as one [...] Read more.
Cyclic Solvent Injection (CSI), one of the most promising solvent-based enhanced oil recovery (EOR) methods, has attracted the oil industry’s interest due to its energy efficiency, produced oil quality, and environmental suitability. Previous studies revealed that foamy oil flow is considered as one of the main mechanisms of the CSI process. However, due to the presence of complex high-permeable channels known as wormholes in Post-Cold Heavy Oil Production with Sands (Post-CHOPS) reservoirs, understanding the effect of each operational parameter on the performance of the CSI process in these reservoirs requires a pore-scale investigation of different wormhole configurations. Therefore, in this project, a comprehensive microfluidic experimental investigation into the effect of symmetrical and asymmetrical wormholes during the CSI process has been conducted. A total of 11 tests were designed, considering four different microfluidic systems with various wormhole configurations. Various operational parameters, including solvent type, pressure depletion rate, and the number of cycles, were considered to assess their effects on foamy oil behavior in post-CHOPS reservoirs in the presence of wormholes. The finding revealed that the wormhole configuration plays a crucial role in controlling the oil production behavior. While the presence of the wormhole in a symmetrical design could positively improve oil production, it would restrict oil production in an asymmetrical design. To address this challenge, we used the solvent mixture containing 30% propane that outperformed CO2, overcame the impact of the asymmetrical wormhole, and increased the total recovery factor by 14% under a 12 kPa/min pressure depletion rate compared to utilizing pure CO2. Moreover, the results showed that applying a lower pressure depletion rate at 4 kPa/min could recover a slightly higher amount of oil, approximately 2%, during the first cycle compared to tests conducted under higher pressure depletion rates. However, in later cycles, a higher pressure depletion rate at 12 kPa/min significantly improved foamy oil flow quality and, subsequently, heavy oil recovery. The interesting finding, as observed, is the gap difference between the total recovery factor at the end of the cycle and the recovery factor after the first cycle, which increases noticeably with higher pressure depletion rate, increasing from 9.5% under 4 kPa/min to 16% under 12 kPa/min. Full article
(This article belongs to the Special Issue Flow Mechanisms and Enhanced Oil Recovery)
Show Figures

Figure 1

40 pages, 4525 KiB  
Article
Private Brand Product on Online Retailing Platforms: Pricing and Quality Management
by Xinyu Wang, Luping Zhang, Yue Qin and Yinsu Wang
J. Theor. Appl. Electron. Commer. Res. 2025, 20(3), 170; https://doi.org/10.3390/jtaer20030170 - 4 Jul 2025
Viewed by 491
Abstract
In recent years, online retailing platforms (ORPs) have increasingly introduced private brand (PB) products as a new profit source, reshaping market dynamics and affecting their commission revenues. This shift creates a strategic trade-off for the platform: maximizing PB product profits while maintaining commission [...] Read more.
In recent years, online retailing platforms (ORPs) have increasingly introduced private brand (PB) products as a new profit source, reshaping market dynamics and affecting their commission revenues. This shift creates a strategic trade-off for the platform: maximizing PB product profits while maintaining commission income from national brand (NB) retailers. This paper examines the platform’s pricing and quality strategies for PB products, as well as its incentives to introduce them. We develop a game-theoretic model featuring a platform and a retailer, and derive results through equilibrium analysis and comparative statics. Special attention is given to the platform’s strategy when market power is asymmetric and the PB product is homogeneous. The analysis yields three key findings. Firstly, the platform is always incentivized to introduce a PB product, regardless of its brand value. Even when direct profit is limited, the platform can leverage the PB product to increase competitive pressure on the retailer and boost commission revenue. Secondly, when the PB product has low brand value, the platform adopts a cost-saving strategy with low quality for extremely low brand value, and a function-enhancing strategy with high quality for moderately low brand value. Thirdly, when the PB product has high brand value, the platform consistently prefers a function-enhancing strategy. This study contributes to the literature by systematically characterizing the platform’s strategic trade-offs in introducing PB products, highlighting its varied pricing and quality strategies across categories, and revealing the critical role of brand value in supply chain competition. Full article
Show Figures

Figure 1

30 pages, 2010 KiB  
Review
Functional Versatility of Vibrio cholerae Outer Membrane Proteins
by Annabelle Mathieu-Denoncourt and Marylise Duperthuy
Appl. Microbiol. 2025, 5(3), 64; https://doi.org/10.3390/applmicrobiol5030064 - 3 Jul 2025
Viewed by 931
Abstract
A key feature that differentiates Gram-positive and Gram-negative bacteria is the outer membrane, an asymmetric membrane composed of lipopolysaccharides, phospholipids, lipoproteins and integral proteins, including the outer-membrane proteins (OMPs). By being in direct contact with the extracellular milieu, the outer membrane and OMPs [...] Read more.
A key feature that differentiates Gram-positive and Gram-negative bacteria is the outer membrane, an asymmetric membrane composed of lipopolysaccharides, phospholipids, lipoproteins and integral proteins, including the outer-membrane proteins (OMPs). By being in direct contact with the extracellular milieu, the outer membrane and OMPs participate in multiple functions in Gram-negative bacteria, including controlling nutrient and molecule access to the cytoplasm, membrane vesicle formation and resistance to environmental stresses. OMPs have a characteristic barrel shape formed by antiparallel β-strands, with or without channels that allow diffusion of substrates through the outer membrane. The marine bacterium Vibrio cholerae is responsible for non-invasive gastroenteritis and cholera disease by consumption of contaminated water or food. Its OMPs, besides having a porin function, contribute to resistance to osmotic pressure and antimicrobial agents, intracellular signaling, adhesion to host cells and biofilm formation, amongst other functions. In this review, in addition to quickly reviewing the general structure of the outer membrane, the OMPs and how they reach the outer membrane, the functions attributed to these proteins are compiled. The mechanisms used by each of the described OMP to accomplish these functions in the marine pathogenic bacterium V. cholerae are discussed. Potential clinical and bioengineering applications of OMPs, such as diagnostic tools, vaccine development, and targeted antimicrobial or anti-virulence strategies are presented. What is known about the OMPs of V. cholerae is presented below. Full article
Show Figures

Graphical abstract

20 pages, 12338 KiB  
Article
Study on the Evolution Characteristics of Surrounding Rock and Differentiated Support Design of Dynamic Pressure Roadway with Double-Roadway Arrangement
by Linjun Peng, Shixuan Wang, Wei Zhang, Weidong Liu and Dazhi Hui
Appl. Sci. 2025, 15(13), 7315; https://doi.org/10.3390/app15137315 - 29 Jun 2025
Viewed by 344
Abstract
To elucidate evolutionary characteristics of the surrounding rock failure mechanism in a double-roadway layout, this work is grounded on in the research context of the Jinjitan Coal Mine, focusing on the deformation and failure mechanisms of double roadways. This paper addresses the issue [...] Read more.
To elucidate evolutionary characteristics of the surrounding rock failure mechanism in a double-roadway layout, this work is grounded on in the research context of the Jinjitan Coal Mine, focusing on the deformation and failure mechanisms of double roadways. This paper addresses the issue of resource wastage resulting from the excessive dimensions of coal pillars in prior periods by employing a research methodology that integrates theoretical analysis, numerical simulation, and field monitoring to systematically examine the movement characteristics of overlying rock in the working face. On that basis, the size of coal pillar is optimized. The advance’s stress transfer law and deformation distribution characteristics of the return air roadway and transport roadway are studied. The cause of the asymmetric deformation of roadway retention is explained. A differentiated design is conducted on the support parameters of double-roadway bolts and cables under strong dynamic pressure conditions. The study indicates that a 16 m coal pillar results in an 8 m elastic zone at its center, balancing stability with optimal resource extraction. In the basic top-sloping double-block conjugate masonry beam structure, the differing stress levels between the top working face’s transport roadway and the lower working face’s return air roadway are primarily due to the varied placements of key blocks. In the return air roadway, floor heave deformation is managed using locking anchor rods, while roof subsidence is controlled with a constant group of large deformation anchor cables. The displacement of surrounding rock increases under the influence of both leading and lagging pressures from the previous working face, although the change is minimal. There is a significant correlation between roadway deformation and support parameters and coal pillar size. With a 16 m coal pillar, differential support of the double roadway lowers the return air roadway deformation by 30%, which improves the mining rate and effectively controls the deformation of the roadway. Full article
Show Figures

Figure 1

19 pages, 4849 KiB  
Article
Optimal Design for Torque Ripple Reduction in a Traction Motor for Electric Propulsion Vessels
by Gi-haeng Lee and Yong-min You
Actuators 2025, 14(7), 314; https://doi.org/10.3390/act14070314 - 24 Jun 2025
Viewed by 276
Abstract
Recently, as carbon emission regulations enforced by the International Maritime Organization (IMO) have become stricter and pressure from the World Trade Organization (WTO) to abolish tax-free fuel subsidies has increased, the demand for electric propulsion systems in the marine sector has grown. Most [...] Read more.
Recently, as carbon emission regulations enforced by the International Maritime Organization (IMO) have become stricter and pressure from the World Trade Organization (WTO) to abolish tax-free fuel subsidies has increased, the demand for electric propulsion systems in the marine sector has grown. Most small domestic fishing vessels rely on tax-free fuel and have limited cruising ranges and constant-speed operation, which makes them well-suited for electric propulsion. This paper proposes replacing the internal combustion engine system of such vessels with an electric propulsion system. Based on real operating conditions, an Interior Permanent Magnet Synchronous Motor (IPMSM) was designed and optimized. The Savitsky method was used to calculate total resistance at a typical cruising speed, from which the required torque and output were determined. To reduce torque ripple, an asymmetric dummy slot structure was proposed, with two dummy slots of different widths and depths placed in each stator slot. These dimensions, along with the magnet angle, were set as optimization parameters, and a metamodel-based optimal design was carried out. As a result, while meeting the design constraints, torque ripple decreased by 2.91% and the total harmonic distortion (THD) of the back-EMF was lowered by 1.32%. Full article
(This article belongs to the Special Issue Feature Papers in Actuators for Surface Vehicles)
Show Figures

Figure 1

13 pages, 3508 KiB  
Article
Increasing Nebulizer Spray Efficiency Using a Baffle with a Conical Surface: A Computational Fluid Dynamics Analysis
by Hung-Chieh Wu, Fu-Lun Chen, Yuan-Ching Chiang, Yi-June Lo, Chun-Li Lin, Wei-Jen Chang and Haw-Ming Huang
Bioengineering 2025, 12(7), 680; https://doi.org/10.3390/bioengineering12070680 - 20 Jun 2025
Viewed by 456
Abstract
Breath-actuated nebulizers used in aerosol therapy are vital to children and patients with disabilities and stand out for their ability to accurat ely deliver medication while minimizing waste. Their performance can be measured according to the mass output and droplet size. This study [...] Read more.
Breath-actuated nebulizers used in aerosol therapy are vital to children and patients with disabilities and stand out for their ability to accurat ely deliver medication while minimizing waste. Their performance can be measured according to the mass output and droplet size. This study aimed to analyze how the baffle impact surface geometries affect the pressure and flow streamlines inside the nebulizer using computational fluid dynamics (CFD). Computer-aided design models of conical symmetric, conical asymmetric, and arc-shaped baffle designs were analyzed using CFD simulations, with the optimal spray output validated through the differences in mass. Conical baffles exhibited superior pressure distribution and output streamlines at 0.25 cm protrusion, suggesting that the nebulizer spray performance can be enhanced by using such a conical baffle impact surface. This result serves as a valuable reference for future research. Full article
(This article belongs to the Section Biomedical Engineering and Biomaterials)
Show Figures

Figure 1

12 pages, 796 KiB  
Article
Maternal Vascular Adaptation in High-Risk Pregnancies: Effects of Early Smoking Cessation on Hemodynamic and Endothelial Function
by Kaltrina Kutllovci Hasani, Mila Cervar-Zivkovic, Ursula Hiden, Adam Saloň, Manurishi Nanda, Bianca Steuber, Katharina Eberhard, Patrick De Boever, Christina Stern, Karoline Mayer-Pickel and Nandu Goswami
Int. J. Mol. Sci. 2025, 26(12), 5781; https://doi.org/10.3390/ijms26125781 - 16 Jun 2025
Viewed by 432
Abstract
Cardiovascular adaptation is vital for a healthy pregnancy but may be impaired in women at high risk for preeclampsia (PE), a condition marked by endothelial dysfunction. Smoking may lower the PE risk but harms vessels, and the effects of early cessation remain unclear. [...] Read more.
Cardiovascular adaptation is vital for a healthy pregnancy but may be impaired in women at high risk for preeclampsia (PE), a condition marked by endothelial dysfunction. Smoking may lower the PE risk but harms vessels, and the effects of early cessation remain unclear. This prospective cohort study assessed vascular changes in high-risk pregnancies and the potential influence of early smoking cessation. Of 110 women screened for PE in the first trimester, 43 were classified as high-risk: 18 former smokers and 25 lifelong non-smokers. Vascular assessments were performed at 11–16, 24–28, and 34–37 weeks of gestation. Parameters included the carotid–femoral pulse wave velocity (cfPWV), asymmetric dimethylarginine (ADMA), mean arterial pressure (MAP), systolic and diastolic blood pressure (SBP, DBP), heart rate (HR), and retinal vessel calibers (central retinal arteriolar and venular equivalents (CRAE, CRVE)). Serum cotinine confirmed abstinence in former smokers. Across gestation, ADMA (p = 0.034), MAP (p = 0.001), SBP (p = 0.033), DBP (p = 0.004), and HR (p = 0.004) increased, while CRAE (p = 0.016) and CRVE (p = 0.004) narrowed in late pregnancy; cfPWV remained stable (p = 0.783). Non-smokers showed increases in their ADMA (p = 0.020), MAP (p = 0.001), and DBP (p = 0.0001) with no differences between groups. High-risk pregnancies showed vascular changes with similar profiles in former and non-smokers, underscoring the need for broader studies. Full article
Show Figures

Figure 1

16 pages, 12973 KiB  
Article
Study of Inlet Vortex Behavior in Dual-Pump Systems and Its Influence on Pump Operational Instability
by Wei Song, Jilong Lin, Yonggang Lu, Yun Zhao and Zhengwei Wang
Water 2025, 17(12), 1784; https://doi.org/10.3390/w17121784 - 14 Jun 2025
Viewed by 482
Abstract
This study addresses inlet flow distribution and pressure pulsation-induced vibration in LNG dual-pump parallel systems. We investigate an LNG dual-submerged pump tower system. Our approach combines computational fluid dynamics with vortex dynamics theory. We examine inlet flow characteristics under different flow conditions. Pressure [...] Read more.
This study addresses inlet flow distribution and pressure pulsation-induced vibration in LNG dual-pump parallel systems. We investigate an LNG dual-submerged pump tower system. Our approach combines computational fluid dynamics with vortex dynamics theory. We examine inlet flow characteristics under different flow conditions. Pressure pulsation propagation patterns are analyzed. System stability mechanisms are investigated. A 3D model incorporates inducers, impellers, guide vanes, outlet sections, and base structures. The SST k-ω turbulence model and Q-criterion vortex identification reveal key features. Results show minimal head differences during parallel operation. The inlet flow field remains uniform without significant vortices. However, local low-velocity zones beneath the base may cause flow separation at low flows. Pressure pulsations are governed by guide vane rotor–stator interactions. These disturbances propagate backward to impellers and inducers. Outlet sections show asymmetric pressure fluctuations. This asymmetry results from spatial positioning differences. Complex base geometries generate low-intensity vortices. Vortex intensity stabilizes at higher flows. These findings provide theoretical foundations for vibration suppression. Full article
(This article belongs to the Special Issue Hydrodynamics Science Experiments and Simulations, 2nd Edition)
Show Figures

Figure 1

Back to TopTop