Search Results (26)

The rapidly increasing demand for compact, high-performance beam-steering solutions in LiDAR systems has driven substantial advances in vertical-cavity surface-emitting laser (VCSEL) technologies. In this paper, we present a high-power, ultra-low-divergence VCSEL-based beam scanner array that integrates multi-wavelength seed lasers with extended-length optical amplifiers, thereby simultaneously achieving wide-angle beam steering, near-diffraction-limited beam quality, and watt-class output power. The proposed architecture exploits slow-light modes supported by laterally extended VCSEL waveguides incorporating precisely engineered surface gratings. This design enables fully electronic beam steering over an angular range exceeding 30°, with an angular resolution surpassing 1600 resolvable points. Systematic characterization of seed lasers with distinct grating periods confirms robust single-mode operation and yields a cumulative wavelength tuning range exceeding 22 nm. When integrated with optical amplifiers up to 6 mm in length, the system achieves a record-low beam divergence of 0.018°, approaching the theoretical diffraction limit. Under continuous-wave operation and without active thermal management, the device delivers output powers exceeding 1.6 W. By overcoming the long-standing trade-offs among steering range, beam quality, and output power, this work establishes a transformative paradigm for compact VCSEL-based beam-steering systems and represents a significant step toward next-generation solid-state LiDAR technologies. Full article

A central challenge in reconfigurable photonics based on quasi bound states in the continuum (quasi-BICs) is to move beyond binary switching toward multistate and polarization-aware programmability. Here we propose a dual-phase-change material (PCM) metasurface that enables four-state nonvolatile switching and polarization-divergent dispersion rewriting within a single unit cell. Two independently switchable PCM layers provide four addressable configurations (0-0, 0-1, 1-0, 1-1) at a fixed geometry, allowing the resonance landscape to be reprogrammed through complex-index rewriting without structural modification. Angle-resolved transmission maps reveal fundamentally different evolution pathways for orthogonal polarizations. For p polarization, the quasi-BIC exhibits strong state sensitivity with dispersion reshaping and multi-branch features near normal incidence; the resonance red-shifts from ~1331 nm to ~1355 nm while the quality factor decreases from ~6.7 × 10⁴ to ~4.0 × 10⁴. In contrast, for s polarization, a single weakly dispersive branch translates coherently across states, producing a much larger shift from ~1635 nm to ~1790 nm while the quality factor increases from ~9.0 × 10³ to ~1.8 × 10⁴. The opposite quality-factor trajectories, together with the polarization-contrasting tuning ranges, demonstrate that dual-PCM programming reconfigures polarization-selective radiative coupling rather than imposing a uniform resonance shift. This compact two-bit metasurface platform provides multistate, high-Q control with active dispersion engineering, enabling polarization-multiplexed reconfigurable filters, state-addressable sensors, and other programmable photonic devices. Full article

Identified-hadron production (p, ${\pi }^{\pm }$, $K^{\pm }$) in ${\pi }^{+}+\mathrm{Be}$ at $p_{\mathrm{lab}}=60\mathrm{GeV}/c$ ($\sqrt{s}\simeq 10.6\mathrm{GeV}$) is investigated using Pythia 8.315 (Monash tune) with the Angantyr extension. Differential multiplicities $d^{2}n/\left(dpd\theta \right)$ are confronted with NA61/SHINE measurements across standard $\theta$ bins. Within the fluctuating-radii Double-Strikman (DS) scheme, two unsuppressed opacity mappings are compared to quantify systematics. In addition, a minimal extension is introduced: a flat, post-classification, channel-wise acceptance applied after ND/SD/DD/EL tagging. It acts on primary and secondary $\pi N$ pairs, keeps hadronization fixed (Lund string), and leaves the internal event generation of each admitted subcollision unchanged. Opacity-mapping variations alone induce only percent-level differences and do not resolve the soft/forward tensions. By contrast, the flat acceptance—interpretable as a reduced effective ND weight—improves agreement across species and angles. It hardens the forward ${\pi }^{+}$ spectra and lowers large-$\theta$ yields, produces milder charge-asymmetric changes for ${\pi }^{-}$ consistent with the weaker leading feed, suppresses proton yields at all angles (with a residual $\sim 30\%$ forward high-p deficit), and improves $K^{\pm }$, with a stronger effect for $K^{+}$ than $K^{-}$. These results show that a geometry-blind reweighting of the subcollision mixture suffices to capture the main NA61/SHINE trends for ${\pi }^{+}+\mathrm{Be}$ at SPS energies without modifying hadronization. The approach provides a controlled baseline for subsequent, channel-balanced refinements and broader ${\pi }^{+}A$ tuning. Full article

This study presents a molecular dynamics (MD) investigation of water evaporation in copper nanochannels, with a focus on accurately modeling copper–water interactions through forcefield calibration. The TIP4P/2005 water model was coupled with the Modified Embedded Atom Method (MEAM) for copper, and the oxygen–copper Lennard–Jones (LJ) parameters were systematically tuned to match experimentally reported water contact angles (WCAs) on Cu (111) surfaces. Contact angles were extracted from simulation trajectories using a robust five-step protocol involving 2D kernel density estimation, adaptive thresholding, circle fitting, and mean squared error (MSE) validation. The optimized forcefield demonstrated strong agreement with experimental WCA values (50.2°–82.3°), enabling predictive control of wetting behavior by varying ε in the range 0.20–0.28 kcal/mol. Using this validated parameterization, we explored nanoscale evaporation in copper channels under varying thermal loads (300–600 K). The results reveal a clear temperature-dependent transition from interfacial-layer evaporation to bulk-phase vaporization, with evaporation onset and rate governed by the interplay between copper–water adhesion and thermal disruption of hydrogen bonding. These findings provide atomistically resolved insights into wetting and evaporation in metallic nanochannels, offering a calibrated framework for simulating phase-change heat transfer in advanced thermal management systems. Full article

Electric vehicle (EV) drivetrains often suffer from degraded control precision due to resolver zero-position deviation. This issue becomes particularly critical under diverse automotive-grade operating conditions, posing challenges for achieving reliable and efficient drivetrain performance. To tackle this problem, we propose a dual-mode PID dynamic compensation control methodology. This approach establishes a divide-and-conquer framework that differentiates between weak-magnetic and non-weak-magnetic regions. It integrates current loop feedback with a fuzzy self-tuning mechanism, enabling real-time dynamic compensation of the resolver’s initial angle. To ensure system stability under extreme automotive conditions (−40 °C to 125 °C, ±0.5 g vibration, and electromagnetic interference), a triple-redundancy architecture is implemented. This architecture combines hardware filtering, software verification, and fault diagnosis. Our contribution lies in presenting a reliable solution for intelligent EV drivetrain calibration. The proposed method effectively mitigates resolver zero-position deviation, not only enhancing drivetrain performance under challenging automotive environments but also ensuring compliance with ISO 26262 ASIL-C safety standards. This research has been validated through its implementation in a 3.5-ton commercial logistics vehicle by a leading automotive manufacturer, demonstrating its practical viability and potential for widespread adoption in the EV industry. Full article

We have combined the theory of bulk dynamics and the agronomic requirements of precision sowing with the aim of resolving the technical problems of poor seed mobility and the difficulty in controlling suction posture, which leads to an increase in the leakage rate and a reduction in seed qualification index scores. In this study, a vibrationally tuned directional seed supply method and system are proposed. We carried out a force analysis of seeds, constructed kinematic equations for seeds and seed boxes to specify the state of the seed motion, and determined the structural parameters and the range of structural parameters that affect the seed suction posture. In addition, we coupled the ADAMS-EDEM simulation of the motion process of the seed and seed boxes and analyzed the vibrational tuning process of the seeds and the angle of inclination of the bottom surface of the seed box. The speed of the eccentric wheel and the eccentric distance were used as test factors. Three-factor and three-level Box–Behnken central combination testing with a single-grain rate, multiple-grain rate, and cavity rate were used as response indicators. Mathematical models were obtained between the experimental factors and the response indicators. Multi-objective optimization of mathematical regression models was carried out with Design-Expert 10.0.4 software. The optimal parameter combination obtained was a tilt angle of 14.27°, an eccentric wheel speed of 4.48 rad/s, and an eccentricity of 1.94 mm. The rate of single grains was 90.75%, the rate of multiple grains was 3.63%, and the rate of cavities was 5.62%. In bench performance tests, using an angle of inclination of 14°, the speed of the eccentric wheel was 4.50 rad/s and the eccentricity was 2 mm. The mean value of the single-grain rate was 89.28%, the mean value of the multiple-grain rate was 3.89%, and the mean value of the cavity rate was 6.83%. The test error was within permissible limits, and reliable results were achieved for parameter optimization. The results met the technical requirements for precision sowing. The results of the study can provide academic references for theoretical research on the methodology of posturing and directional seed supply. They can also provide ideas for the design and development of seed supply systems for precision sowing machinery. Full article

The robust flight-path angle consensus tracking control problem for multiple unmanned fixed-wing aircrafts is investigated in this paper, where the non-minimum phase properties and the presence of measurement errors are systematically addressed. A three-module control scheme is proposed for each aircraft: a Distributed Observer that obtains the available information from the reference system and the neighbor aircraft to provide the estimates of the reference states; a Casual Stable Inversion that calculates the bounded estimates of the desired input, desired external states, and most importantly, desired internal states to resolve the divergence issues caused by the non-minimum phase properties; and a Local Measurement Error Rejection Controller that includes a measurement error estimator (MEE) to actively compensate for the adverse effect of measurement errors to achieve robust consensus tracking control. Stability, convergence, and robustness of the proposed control are analyzed, showing that (1) the non-minimum phase issue can be systematically resolved by the designed Casual Stable Inversion to ensure aircraft internal stability and flight safety, and (2) the consensus tracking accuracy can be improved by tuning a single MEE parameter, which is favorable in practical applications to large-scale unmanned aircraft formations. Comparative simulation results with classic PID-based consensus control demonstrate the advantage of the proposed control in transient oscillations, steady-state tracking accuracy, and robustness against measurement errors. Full article

Metallic photonic lattices are promising in their application to plasmonic optical devices; however, scalable fabrication strategies are limited by sample size, response wavelength (mostly in the visible range), cost, and duration. This paper proposes a direct imprinting strategy to fabricate large-area metallic photonic lattices, which present a strong plasmonic response and broadband angle-resolved tuning properties in the infrared region. This simple fabrication strategy combines solution-synthesized Au nanoparticle colloid and imprinting technology, which does not require the use of photoresist or lithography. Thus, the feature size and response wavelength can exceed the limitations of the beam size and wave band, thereby offering the advantages of a low cost and high throughput. Full article

A one-dimensional photonic crystal (1DPhC) with a defect layer is utilized as an optical filter in a simple realization of narrow linewidth LED-based sources. The 1DPhC comprising TiO${}_2$ and SiO${}_2$ layers is characterized by two narrow defect mode resonances within the 1DPhC band gap, or equivalently, by two peaks in the normal incidence transmittance spectrum at wavelengths of 625.4 nm and 697.7 nm, respectively. By combining the optical filter with LEDs, the optical sources are employed in interferometry experiments, and the defect mode resonances of a Lorentzian profile with linewidths of 1.72 nm and 1.29 nm, respectively, are resolved. In addition, a simple way to tune the resonances by changing the angle of incidence of light on the optical filter is demonstrated. All-dielectric optical filters based on 1DPhCs with a defect layer and combined with LEDs thus represent an effective alternative to standard coherent sources, with advantages including narrow spectral linewidths and variable output power, with an extension to tunable sources. Full article

Electronically enhanced current transformers (EECT) have gained much interest in power quality assessment. Their magnitude and phase angle error, which mainly relates to the properties of the ferromagnetic materials used, the impedance of the secondary load, and the inter-turns capacitance, are thoroughly analyzed. In contrast, the capacitance between the windings, i.e., inter-winding capacitances and their limiting effects on EECT operation, are rarely analyzed in detail—in particular, no details on the control design of the assisting electronic unit, its tuning recommendations, or both are provided. In this paper, the capacitive coupling between indication and compensating winding of EECT with simplified feedthrough construction is analyzed thoroughly in terms of current ratio error and stability of the implemented configuration of the trans-conductance amplifier. The preliminary assumption about the adverse effect of the inter-winding capacitance shunting both ends of the original amplifier, composed of two series-connected inverting amplifier stages, was confirmed and resolved within a modified amplifier with the help of a simplified simulation model and was experimentally proven with measurements on a custom-built EECT prototype. Furthermore, the analyzed phenomena were linked to trans-conductance amplifier parameters, explicitly with its compensating networks, and summarized in their design guidelines. Throughout the paper, the EECT features obtained with original and modified amplifier designs are compared with the plain composite current transformer to demonstrate the benefits of the modified amplifier, especially its robustness against inter-winding capacitance variations. Full article

The scattering of gases on solid surfaces plays a vital role in many advanced technologies. In this study, the scattering behavior of helium on graphene surfaces was investigated, including the thermal accommodation coefficient (TAC), outgoing zenith angle of helium, bounce number, and interaction time. First, we performed molecular dynamics simulations to describe the incident angle-resolved behaviors, and showed that the scattering is highly dependent on the zenith angle of incident helium but insensitive to the azimuthal angle. The contribution of the normal velocity component of the incident helium dominated the energy transfer. The nonlinear relationship of the parameters to the zenith angle of the incident helium could be suppressed by increasing the graphene temperature or decreasing the speed of the incident helium. Subsequently, the scattering performance considering all gas molecules in the hemispherical space was evaluated using the Monte Carlo method with angle-resolved results. The result showed that the TAC, its nominal components, and the zenith angle of the scattered helium increased with higher speeds of incident helium and lower temperatures of graphene. This study should provide a fundamental understanding of energy transfer between gas and two-dimensional materials and guidelines to tune the scattering behavior between them. Full article

The emergence of smart headlights with reconfigurable light distributions that provide optimal illumination, highlight road objects, and project symbols to communicate with traffic participants further enhances road safety. Integrating all these functions in a single headlight usually suffers from issues of bulky multi-functional add-on modules with high cost or the use of conventional spatial light modulators with low optical efficiency and complex thermal design requirements. This paper presents a novel laser headlight prototype based on biaxially resonant microelectromechanical systems (MEMS) mirror light modulator for mapping blue laser patterns on phosphor plate to create structured white illumination and tunable road projection. The proposed headlight prototype system enables reconfigurable light distribution by leveraging laser beam scanning with fewer back-end lens and simple thermal design requirements. Built with thin-film lead zirconate titanate oxide (PbZrTiO₃) actuators, the MEMS mirror achieved high-frequency biaxial resonance of 17.328 kHz, 4.81 kHz, and optical scan angle of 12.9°. The large mirror design of 2.0 mm facilitates more refined resolvable projection pixels, delivers more optical power, and provides moderate optical aperture to possibly serve as the common spatial light modulator of headlight and the light detection and ranging (LiDAR) towards all-in-one integration. The carefully designed bi-axial resonant frequency improves the device’s robustness by offsetting the lowest eigenmode away from the vehicle vibration. By establishing the laser headlight prototype systems of both 1D and 2D scanning modes, a mathematical model of laser modulation and MEMS electrical control principles of Lissajous scanning are proposed to tune the projection pattern density and shapes. It laid the foundation for developing a laser scanning control system with more complex project functions and prompting the application of MEMS for compact headlight system that addresses night driving visibility, eliminates glare effect, and renders interactive projection capabilities. Full article

The intrinsic magnetic topological insulator MnBi₂Te₄ has attracted much attention due to its special magnetic and topological properties. To date, most reports have focused on bulk or flake samples. For material integration and device applications, the epitaxial growth of MnBi₂Te₄ film in nanoscale is more important but challenging. Here, we report the growth of self-regulated MnBi₂Te₄ films by the molecular beam epitaxy. By tuning the substrate temperature to the optimal temperature for the growth surface, the stoichiometry of MnBi₂Te₄ becomes sensitive to the Mn/Bi flux ratio. Excessive and deficient Mn resulted in the formation of a MnTe and Bi₂Te₃ phase, respectively. The magnetic measurement of the 7 SL MnBi₂Te₄ film probed by the superconducting quantum interference device (SQUID) shows that the antiferromagnetic order occurring at the Néel temperature 22 K is accompanied by an anomalous magnetic hysteresis loop along the c-axis. The band structure measured by angle-resolved photoemission spectroscopy (ARPES) at 80 K reveals a Dirac-like surface state, which indicates that MnBi₂Te₄ has topological insulator properties in the paramagnetic phase. Our work demonstrates the key growth parameters for the design and optimization of the synthesis of nanoscale MnBi₂Te₄ films, which are of great significance for fundamental research and device applications involving antiferromagnetic topological insulators. Full article

The strain in hybrid van der Waals heterostructures, made of two distinct two-dimensional van der Waals materials, offers an interesting handle on their corresponding electronic band structure. Such strain can be engineered by changing the relative crystallographic orientation between the constitutive monolayers, notably, the angular misorientation, also known as the “twist angle”. By combining angle-resolved photoemission spectroscopy with density functional theory calculations, we investigate here the band structure of the WS₂/graphene heterobilayer for various twist angles. Despite the relatively weak coupling between WS₂ and graphene, we demonstrate that the resulting strain quantitatively affects many electronic features of the WS₂ monolayers, including the spin-orbit coupling strength. In particular, we show that the WS₂ spin-orbit splitting of the valence band maximum at K can be tuned from 430 to 460 meV. Our findings open perspectives in controlling the band dispersion of van der Waals materials. Full article

In this study, we investigate the potential of one-dimensional plasmonic grating structures to serve as a platform for, e.g., sensitive refractive index sensing. This is achieved by comparing numerical simulations to experimental results with respect to the excitation of surface plasmon polaritons (SPPs) in the mid-infrared region. The samples, silver-coated poly-silicon gratings, cover different grating depths in the range of 50 nm–375 nm. This variation of the depth, at a fixed grating geometry, allows the active tuning of the bandwidth of the SPP resonance according to the requirements of particular applications. The experimental setup employs a tunable quantum cascade laser (QCL) and allows the retrieval of angle-resolved experimental wavelength spectra to characterize the wavelength and angle dependence of the SPP resonance of the specular reflectance. The experimental results are in good agreement with the simulations. As a tendency, shallower gratings reveal narrower SPP resonances in reflection. In particular, we report on 2.9 nm full width at half maximum (FWHM) at a wavelength of 4.12 µm and a signal attenuation of $21\%$. According to a numerical investigation with respect to a change of the refractive index of the dielectric above the grating structure, a spectral shift of $4122\frac{\mathrm{nm}}{\mathrm{RIU}}$ can be expected, which translates to a figure of merit (FOM) of about 1421 ${\mathrm{RIU}}^{-1}$. The fabrication of the suggested structures is performed on eight-inch silicon substrates, entirely accomplished within an industrial fabrication environment using standard microfabrication processes. This in turn represents a decisive step towards plasmonic sensor technologies suitable for semiconductor mass-production. Full article