Search Results (681)

Background/Objectives: This study investigated the association between cochlear implant (CI) users’ assessed perception of musical sound quality and their subjective music perception and music-related quality of life (QoL). The aim was to provide a comprehensive evaluation by integrating a relatively objective Turkish Multiple Stimulus with Hidden Reference and Anchor (TR-MUSHRA) test and a subjective music questionnaire. Methods: Thirty CI users and thirty normal-hearing (NH) adults were assessed. Perception of sound quality was measured using the TR-MUSHRA test. Subjective assessments were conducted with the Music-Related Quality of Life Questionnaire (MuRQoL). Results: TR-MUSHRA results showed that while NH participants rated all filtered stimuli as perceptually different from the original, CI users provided similar ratings for stimuli with adjacent high-pass filter settings, indicating less differentiation in perceived sound quality. On the MuRQoL, groups differed on the Frequency subscale but not the Importance subscale. Critically, no significant correlation was found between the TR-MUSHRA scores and the MuRQoL subscale scores in either group. Conclusions: The findings demonstrate that TR-MUSHRA is an effective tool for assessing perceived sound quality relatively objectively, but there is no relationship between perceiving sound quality differences and measures of self-reported musical engagement and its importance. Subjective music experience may represent different domains beyond the perception of sound quality. Therefore, successful auditory rehabilitation requires personalized strategies that consider the multifaceted nature of music perception beyond simple perceptual judgments. Full article

The recovery and abatement of volatile organic compounds (VOCs) have received increasing attention due to their significant environmental and health impacts. Supported sulfonic acid materials have shown great potential in converting aromatic VOCs into their non-volatile derivatives through reactive adsorption. However, the anchoring state of sulfonic acid groups, which is closely related to the properties of the support, greatly affects their performance. In this study, two supported sulfonic acid materials, SZO and SMO, were prepared by treating ZrO₂ and MgO with chlorosulfonic acid, respectively, to investigate the influence of the support properties on the anchoring state of sulfonic acid groups and their reactive adsorption performance for o-xylene. The supports, adsorbents, and adsorption products were extensively characterized, and the reactivity of SZO and SMO towards o-xylene was systematically compared. The results showed that sulfonic acid groups are anchored on the ZrO₂ surface through covalent bonding, forming positively charged sulfonic acid sites ([O_1.5Zr-O]^δ−-SO3H^δ+) with a loading of 3.6 mmol/g. As a result, SZO exhibited excellent removal efficiency (≥91.3%) and high breakthrough adsorption capacity (ranging from 38.59 to 82.07 mg/g) for o-xylene in the temperature range of 130 –150 °C. In contrast, sulfonic acid groups are anchored on the MgO surface via ion-paired bonding, leading to the formation of negatively charged sulfonic acid sites ([O_0.5Mg]⁺:OSO₃H⁻), which prevents their participation in the electrophilic sulfonation reaction with o-xylene molecules. This work provides new insights into tuning and enhancing the performance of supported sulfonic acid materials for the resource-oriented treatment of aromatic VOCs. Full article

In civil engineering, with the increasing demand for structural reinforcement and renovation projects, polymer-rich anchoring adhesives have attracted much attention due to their performance advantage of having high strength and have become a key factor in ensuring the safety and durability of buildings. In this study, polymer-rich anchoring adhesives underwent three artificial aging treatments (alkali medium, hygrothermal, and water bath) to evaluate their aging performance. Alkali treatment reduced bending strength by up to 70% (sample 5#) within 500 h before stabilizing, while hygrothermal and water-curing treatments caused reductions of 16–51% and 15–77%, respectively, depending on adhesive composition. Dynamic thermomechanical analysis revealed significant loss factor decreases (e.g., epoxy adhesives dropped from >1.0 to stable lower values after 500 h aging), indicating increased rigidity. Infrared spectroscopy confirmed chemical degradation, including ester group breakage in vinyl ester resins (peak shifts at 1700 cm⁻¹ and 1100 cm⁻¹) and molecular chain scission in unsaturated polyesters. The three test methods consistently demonstrated that 500 h of aging sufficiently captured performance trends, with alkali exposure causing the most severe degradation in sensitive formulations (e.g., samples 5# and 6#). These results can be used to establish quantitative benchmarks for adhesive durability assessment in structural applications. Full article

The methanol oxidation reaction (MOR) of direct methanol fuel cells (DMFCs) is limited by the slow kinetic process and high reaction energy barrier, significantly restricting the commercial application of DMFCs. Therefore, developing MOR catalysts with high activity and stability is very important. In this paper, oxygen-functionalised activated carbon (FAC) with controllable oxygen-containing functional groups was prepared by adjusting the volume ratio of H₂SO₃/HNO₃ mixed acid, and Pd/AC and Pd/FAC catalysts were synthesised via the hydrazine hydrate reduction method. A series of characterisation techniques and electrochemical performance tests were used to study the catalyst. The results showed that when V(H₂SO₃):V(HNO₃) = 2:3, more defects were generated on the surface of the AC, and more oxygen-containing functional groups represented by C=O and C–OH were attached to the surface of the support, which increased the anchor sites of Pd and improved the dispersion of Pd nanoparticles (Pd NPs) on the support. At the same time, the mass–specific activity of Pd/FAC for MOR was 2320 mA·mg_Pd, which is 1.5 times that of Pd/AC, and the stability was also improved to a certain extent. In situ infrared spectroscopy further confirmed that oxygen functionalisation treatment promoted the formation and transformation of *COOH intermediates, accelerated the transformation of CO_L into CO_B, reduced the poisoning of CO_ads species adsorbed to the catalyst, optimised the reaction path and improved the catalytic kinetic performance. Full article

The inherent hydrophobic nature of PVDF material renders it challenging to establish a stable aqueous hydration layer, thereby limiting its suitability as a substrate for the preparation of nanofiltration (NF) membranes. In this study, we developed a novel modification approach that effectively enhances the hydrophilicity of PVDF substrates through the incorporation of sulfonic acid-doped polyaniline (SPANI) and hyperbranched polyester (HPE) into the PVDF casting solution, followed by cross-linking with trimesoyl chloride (TMC). The introduction of SPANI and HPE, which contain reactive polar amino and hydroxyl groups, improved the hydrophilicity of the substrate, while the subsequent cross-linking with TMC effectively anchored these components within the substrate through the covalent linking between TMC and the reactive sites. Additionally, the hydrolysis of TMC yielded non-reactive carboxyl groups, which further enhanced the hydrophilicity of the substrate. As a result, the modified PVDF substrate exhibited improved hydrophilicity, facilitating the construction of an intact polyamide layer. In addition, the fabricated TFC NF membrane demonstrated excellent performance in the advanced treatment of tap water, achieving a total dissolved solid removal rate of 57.9% and a total organic carbon removal rate of 85.3%. This work provides a facile and effective route to modify PVDF substrates for NF membrane fabrication. Full article

Dye-sensitized solar cells (DSSCs) have emerged as a promising technology for converting sunlight into electricity at a low cost; however, it is still necessary to find a photostable, low-cost, and efficient photosensitizer. In this sense, the natural product bixin (Dye 1) has previously been reported as a potential photosensitizer. Thus, the present work reports the full synthesis of diester and diacid hybrids (Dyes 2 and 3, respectively, with corresponding yields of 93% and 52%) using the natural product bixin as a starting material and 1,3,4-oxadiazole ring as a connected point. The hydrolysis step of Dye 2 aims to obtain Dye 3 with a structural capacity to anchor the titanium dioxide (TiO₂) nanofilms via the carboxylic acid group. Both compounds (Dyes 1 and 3) can be adsorbed via pseudo-first order on the surface of TiO₂ nanofilms, reaching saturation after 10 and 6 min of exposure in an organic solution (1 × 10⁻⁵ M), respectively, with adsorption kinetics of the semisynthetic compound almost twofold higher than the natural product. Contrary to expectations, Dye 3 had spectral behavior similar to Dye 1, but with better frontier molecular orbital (FMO) parameters, indicating that Dye 3 will probably behave very similarly or have slightly better photovoltaic performance than Dye 1 in future DSSC measurements. Full article

The MAM domain-containing glycosylphosphatidylinositol anchor 1 (MDGA1) gene, which encodes a protein involved in synaptic inhibition, has been identified as a potential risk gene for restless legs syndrome. A recent study in the Chinese population described increased MDGA1 methylation levels in patients with idiopathic RLS (iRLS) compared to healthy controls. In this study, we investigated the possible association between the most common variants in the MDGA1 gene and the risk for iRLS in a Caucasian Spanish population. We assessed the frequencies of MDGA1 rs10947690, MDGA1 rs61151079, and MDGA1 rs79792089 genotypes and allelic variants in 263 patients with idiopathic RLS and 280 healthy controls using a specific TaqMan-based qPCR assay. We also analyzed the possible influence of the genotype frequencies on several variables, including age at the onset of RLS, gender, a family history of RLS, and response to drugs commonly used in the treatment of RLS. The frequencies of the genotypes and allelic variants of the three common missense SNVs studied did not differ significantly between RLS patients and controls, neither in the whole series nor when analyzing each gender separately; were not correlated with age at onset and the severity of RLS assessed by the International Restless Legs Syndrome Study Group Rating Scale (IRLSSGRS); and were not related to a family history of RLS or the pharmacological response to dopamine agonists, clonazepam, or gabaergic drugs. Our findings suggest that common missense SNVs in the MDGA1 gene are not associated with the risk of developing idiopathic RLS in Caucasian Spanish people. Full article

Drag embedment anchors (DEAs) provide reliable and cost-effective mooring solutions for floating structures, e.g., platforms, ships, offshore wind turbines, etc., in offshore engineering. Structural stability and operational safety require accurate predictions of their penetration depths and holding capacities across various seabed conditions. In this study, explicit linear regression (LR) models were developed for the first time to predict the penetration depth and holding capacity of DEAs on clay and sand seabed. Buckingham’s theorem was also applied to identify dimensionless groups of parameters that influence DEA behavior, e.g., the penetration depth and holding capacity of the DEAs. LR models were developed and validated against experimental data from the literature for both clay and sand seabed. To evaluate model performance and identify the most accurate LR models to predict DEA behavior, comprehensive sensitivity, error, and uncertainty analyses were performed. Additionally, LR analysis revealed the most influential input parameters impacting penetration depth and holding capacity. Regarding offshore mooring design and geotechnical engineering applications, the proposed LR models offered a practical and efficient approach to estimating DEA performance across various seabed conditions. Full article

The article aims to identify consumer types based on their attitudes and behaviors toward phygital tools and solutions. The analysis was based on the authors’ empirical research. The research was conducted on a sample of 2160 Polish consumers. The study employed an online survey technique. To determine the types of consumers, a 20-item scale was used, allowing the respondents to express their attitudes toward solutions and tools that improve shopping in the phygital space. The extraction of types was carried out in two steps. The first was cluster analysis, conducted using the hierarchical Ward method with the square of the Euclidean distance, and the second was non-hierarchical cluster analysis using the k-means method. As a result of the analyses, three relatively homogeneous types of consumers were distinguished: phygital integrators, digital frequenters, and physical reality anchors. The behaviours of consumers from each type were examined in the context of their impact on sustainable consumption and the sustainable development of the planet. The proposed typology contributes to developing consumer behavior theory in sustainable consumption environments. It provides practical implications for designing customer experiences that are more inclusive, resource-efficient, and aligned with responsible consumption patterns. Understanding how different consumer groups engage with phygital tools allows businesses and policymakers to tailor strategies that support equitable access to digital services and foster more sustainable, adaptive consumption journeys in an increasingly digitized marketplace. Full article

This article investigates issues in the local operationalization of the Planetary Boundaries concept (PBc), crucial for assessing human impacts on the Earth system and guiding sustainable development policies. Originally designed for the global scale, this concept requires local adaptation to align territorial actions with global environmental goals. Following a qualitative analysis of 34 review articles, a systematic categorization method is employed to identify recurrent localization and operationalization issues. Their analysis provides three main contributions that improve the understanding of PBc downscaling mechanisms. First, it identifies a prevalent quantification-based localization approach. Second, it categorizes local operationalization constraints into three distinct groups. Third, it reveals underlying patterns demonstrating that the prevalent approach, despite ensuring scientific rigor, generates methodological and practical constraints to effective local operationalization. This “operational paradox” reveals fundamental tensions between the PBc’s biophysical interpretation, localization by quantification, and local operationalization, contrasting measurement or meaning, precision or participation, and standardized solutions or locally adapted responses. For future research, the analysis of the interactions between these contributions suggests operating a paradigm shift based on a socio-biophysical interpretation of the PBc and the contextualization of the resulting components. This alternative approach could prioritize territorial anchoring, stakeholder inclusion, and the co-construction of sustainability trajectories. Full article

The contribution of the environment to protein folding seems obvious. The aqueous environment directs protein folding towards generating a centric hydrophobic core with a polar shell. The cell membrane environment—in which numerous proteins are anchored—to stabilise the arrangement, expects the exposure of hydrophobic residues and the concentration of polar residues in the central part—a channel for the transport of numerous molecules. The influence of these environments seems evident due to the persistent residence of proteins in their surroundings providing an external force field for structure stabilisation. Structural forms are also obtained with the participation of supporting proteins—such as proteins from the heat shock protein group—which accompany the folding process and temporarily provide an appropriate external force field in which the protein, having obtained the correct structure for its activity, is released from interaction with the supporting protein. This paper discusses an example of the contribution of Hsp104 to casein folding and the effect of disaggregase preventing inappropriate aggregation. For this purpose, a model called the fuzzy oil drop (FOD-M) was used, which takes hydrophobic interactions into account in the assessment of protein structure status. Their distribution in the protein body highlights the contribution and influence of the external force field—originating from Hsp104 and the disaggregase in this case. Full article

To successfully prepare cellulose hydrogels through a dissolution–regeneration process, 60 wt% LiBr aqueous solution was used as a green solvent. Carboxyl groups were precisely introduced onto the surface of the cellulose hydrogels through a TEMPO-mediated oxidation reaction, while the three-dimensional network structure and open pore morphology were completely retained. This modification strategy significantly enhanced the loading capacity of the hydrogels with copper nanoparticles (Cu NPs). The experimental results show that the LiBr aqueous solution can efficiently dissolve cellulose, and the TEMPO oxidation introduces carboxyl groups without destroying the stability of the hydrogels. Cu NPs are uniformly dispersed and highly loaded on the surface of the hydrogel because of the anchoring effect of the carboxyl groups. Cu NP-loaded hydrogels exhibit excellent catalytic activity in the NaBH₄ reduction of 4-nitrophenol (4-NP). Cu NP-loaded hydrogels maintain their complete structure and good catalytic performance after five consecutive cycles. Moreover, Cu NP-loaded hydrogels demonstrate high efficiency in degrading organic dyes such as methyl orange and Congo red. This study successfully developed efficient, low-cost, and environmentally friendly Cu NP-loaded hydrogel catalysts through the synergistic effect of LiBr green solvent and TEMPO oxidation modification, providing a feasible alternative to noble metal catalysts. Full article

Polymer brushes (PBs) are transformative surface-modifying nanostructures, yet their synthesis via controlled methods like copper-mediated surface-initiated atom-transfer radical polymerization (Cu⁰-SI-ATRP) faces reproducibility challenges due to a lack of understanding of parameter interdependencies. This study systematically evaluates the Cu⁰-SI-ATRP process for polyacrylamide brushes (PAM-PBs), aiming to clarify key parameters that influence the synthesis process. This evaluation followed a step-by-step characterization that tracked molecular changes through infrared spectroscopy (IR) and surface development by contact angle (CA) through two different mixing methods: ultrasonic mixing and process simplification (Method A) and following literature-based parameters (Method B). Both methods, consisting of surface activation, 3-aminopropyltriethoxysilane (APTES) deposition, bromoisobutyryl bromide (BiBB) anchoring, and polymerization, were analyzed by varying parameters like concentration, temperature, and time. Results showed ultrasonication during surface activation enhanced siloxane (1139→1115 cm⁻¹) and amine (1531 cm⁻¹) group availability while reducing APTES concentration to 1 Vol% without drying sufficed for BiBB anchoring. BiBB exhibited insensitivity to concentration but benefited from premixing, evidenced by sharp C–Br (~1170 cm⁻¹) and methyl (3000–2800 cm⁻¹) bands. Additionally, it was observed that PAM-PBs improved with Method A, which had reduced variance in polymer fingerprint regions compared to Method B. Adding to the above, CA measurements gave complementary step-by-step information along the modifications of the surface, revealing distinct wettability behaviors between bulk PAM and synthesized PAM-PBs (from 51° to 37°). As such, this work identifies key parameter influence (e.g., mixing, BiBB concentration), simplifies steps (drying omission, lower APTES concentration), and demonstrates a step-by-step, systematic parameter decoupling that reduces variability. In essence, this detailed parameter analysis addresses the PAM-PBs synthesis process with better reproducibility than the previously reported synthesis method and achieves the identification of characteristic behaviors across the step-by-step process without the imperative need for higher-cost characterizations. Full article

To elucidate evolutionary characteristics of the surrounding rock failure mechanism in a double-roadway layout, this work is grounded on in the research context of the Jinjitan Coal Mine, focusing on the deformation and failure mechanisms of double roadways. This paper addresses the issue of resource wastage resulting from the excessive dimensions of coal pillars in prior periods by employing a research methodology that integrates theoretical analysis, numerical simulation, and field monitoring to systematically examine the movement characteristics of overlying rock in the working face. On that basis, the size of coal pillar is optimized. The advance’s stress transfer law and deformation distribution characteristics of the return air roadway and transport roadway are studied. The cause of the asymmetric deformation of roadway retention is explained. A differentiated design is conducted on the support parameters of double-roadway bolts and cables under strong dynamic pressure conditions. The study indicates that a 16 m coal pillar results in an 8 m elastic zone at its center, balancing stability with optimal resource extraction. In the basic top-sloping double-block conjugate masonry beam structure, the differing stress levels between the top working face’s transport roadway and the lower working face’s return air roadway are primarily due to the varied placements of key blocks. In the return air roadway, floor heave deformation is managed using locking anchor rods, while roof subsidence is controlled with a constant group of large deformation anchor cables. The displacement of surrounding rock increases under the influence of both leading and lagging pressures from the previous working face, although the change is minimal. There is a significant correlation between roadway deformation and support parameters and coal pillar size. With a 16 m coal pillar, differential support of the double roadway lowers the return air roadway deformation by 30%, which improves the mining rate and effectively controls the deformation of the roadway. Full article

Buried in 1858, Cornelis Kok II’s grave lay undisturbed in Campbell, Northern Cape, until 1961 when a multiracial coalition, driven by their own sets of interests, unearthed the Griqua leader’s remains. The bones again took centre stage with the collapse of apartheid when different groups called for their return and reburial, with an assertion, variously, of ascendant Griqua, indigenous, Khoisan, and Khoikhoi identities. The 2007 reinterment again courted controversy and protest, while the contemporary neglect of the new gravesite symbolizes feelings of exclusion and marginalization among some Campbell Griqua today. By tracing the life history of Kok II’s remains, well past his natural life, we demonstrate how they serve as a flashpoint mobilized by actors with different aims and objectives at different moments. These motivations range from scientistic confirmation of genealogy and identity under apartheid rule, to post-apartheid calls for repatriation anchored to a global indigenous rights framework, to factional contestations over ownership. Marshalled towards different political projects, for all these actors, the bones nonetheless serve as a resource and link to a 19th century frontier past. Full article