Search Results (66)

The worldwide transition to renewable energy systems is motivated by diminishing fossil fuel availability and the intensifying consequences of climate change. This study presents a Mixed-Integer Linear Programming (MILP) model for designing and optimising the bio-fuel and electricity supply chain in Colombia, using sugarcane as the main feedstock and integrating microalgae cultivation in vinasse. Six alternative biorefinery configurations and four microalgae conversion pathways were evaluated to inform strategic planning. The optimisation results indicate that microalgae achieve higher energy yields per unit of land than sugarcane. Ethanol production from sugarcane could meet all of Colombia’s gasoline demand, while diesel and sustainable aviation fuel derived from microalgae could supply around 9% and 16%, respectively, of the country’s consumption. Further-more, pelletised bagasse emerges as a viable alternative to replace part of the coal used in thermoelectric plants. From an economic perspective, all scenarios achieve a positive net present value, confirming their profitability. Sensitivity analysis highlights the critical factors influencing the deployment of distilleries as ethanol price, algae productivity, and sugarcane cost. Furthermore, transportation costs play a decisive role in the geographic location of microalgae-based facilities and the distribution of their products. Full article

Rapid industrialization has generated large volumes of acidic wastewater that, without adequate treatment, pose serious environmental and public health risks. Traditional remediation processes, such as chemical neutralization, ion-exchange, and membrane filtration, are effective but costly, energy-intensive, and generate toxic secondary waste. In contrast, acidophilic microalgae offer a sustainable, cost-effective, and eco-friendly alternative. Algae rely on their cellular structure and metabolism to adsorb, absorb, bioaccumulate, and transform toxic metals while simultaneously neutralizing wastewater with minimal secondary waste production. Although acidophilic algae tolerate highly toxic and low pH conditions, their growth rate and biomass productivity, key drivers of algae-based bioremediation, are often compromised under such conditions. Thus, identifying robust species and evolving strains to thrive in these wastewaters without compromising productivity will facilitate adoption of algae-based bioremediation on a large scale. Integrating algal wastewater remediation with biofuel and biofertilizer production can contribute to the circular economy. In this review, we synthesize mechanisms employed by acidophilic algal strains when exposed to acidic and metal-enriched environments to remediate wastewater. We highlight recent studies applying these strains to acidic wastewater remediation and biogas upgrading and discuss current biotechnological tools aimed at enhancing strain performance for future use in commercial systems. Full article

Conventional petroleum-based protective coatings release high levels of volatile organic compounds (VOCs) and contribute to resource depletion, urging the development of environmentally responsible alternatives. Among the bio-based candidates, microalgae and Cyanobacteriophyta have recently gained attention for their ability to produce diverse biopolymers and pigments with intrinsic protective functionalities. However, existing literature has focused mainly on algal biofuels and general biopolymers, leaving a major gap in understanding their application as sustainable coating materials. This review addresses that gap by providing the first integrated assessment of algae-based protective coatings. It begins by defining abiotic and biotic surface degradation mechanisms, including microbiologically influenced corrosion, to establish performance benchmarks. The review then synthesizes recent findings on key algal components, including alginate, extracellular polymeric substances (EPS), and phycocyanin, linking biochemical composition to functional performance, techno-economic feasibility, and industrial scalability. It evaluates their roles in adhesion strength, UV stability, corrosion resistance, and antifouling activity. Reported performance metrics include adhesion strengths of 2.5–3.8 MPa, UV retention above 85% after 2000 h, and corrosion rate reductions of up to 40% compared with polyurethane systems. Furthermore, this study introduces the concept of carbon-negative, multifunctional coatings that simultaneously protect infrastructure and mitigate environmental impacts through CO₂ sequestration and pollutant degradation. Challenges involving biomass variability, processing costs (>USD 500/ton), and regulatory barriers are critically discussed, with proposed solutions through hybrid cultivation and biorefinery integration. By bridging materials science, environmental engineering, and sustainability frameworks, this review establishes a foundation for transforming algae-based coatings from laboratory research to scalable, industrially viable technologies. Full article

The sustainable extraction of microalgal lipids represents a critical step toward the valorization of biomass for nutraceutical, pharmaceutical, and biofuel applications. In this study, a microwave-assisted extraction approach using a biocompatible ionic liquid (IL), [N_{1 1 2OH 2OH}][C₆H₁₁O₂], was investigated for lipid recovery from Chlorella vulgaris. Conventional methods (Soxhlet, Folch, and Bligh & Dyer) were first evaluated for benchmarking. Optimization of microwave power, extraction time, and algae-to-IL mass ratio demonstrated that a 1:8 (m/m) ratio under 5 min and 750 W microwave pretreatment achieved the highest lipid yield, with 10.61 ± 0.39% lipids recovered from the supernatant alone. Subsequent extraction of the pretreated biomass using an environmentally benign solvent mixture (ethyl acetate/ethanol, 1:1 v/v) raised the total lipid recovery to 14.29 ± 0.75%, surpassing Soxhlet extraction with chloroform/methanol (13.04 ± 0.16%). Importantly, the IL was efficiently recovered (≈85%) and reused without significant loss of performance or structural integrity, as confirmed by NMR, DSC, and FTIR analyses. The combined process yielded up to 42.56 ± 0.64 mg FAMEs/g algae, comparable to conventional Soxhlet extraction but with superior environmental compatibility. The relative distribution of FAMEs (in weight percent, wt%) was as follows: C16:2 trans 6.05%, C16:3 trans 13.99%, C16:1 cis 1.85%, C16:1 trans 0.82%, C16:0 16.72%, C18:2 cis 13.74%, C18:3 trans + C18:1 cis + C18:2 trans 26.91%, C18:1 trans 1.67% and C18:0 3.61%. These findings demonstrate that microwave-assisted extraction with choline-based ILs offers an efficient, recyclable, and greener alternative for lipid and fatty acid recovery from microalgae. Full article

Microalgae are promising candidates for renewable biofuel production and nutrient-rich animal feed. Cultivating microalgae using wastewater can lower production costs but often results in biomass contamination and increases downstream processing requirements. This study presents a novel system that integrates an algae cultivator (AC) with a single-chamber microbial fuel cell (MFC) equipped with photosynthetic and air-cathode functionalities, separated by a ceramic membrane. The system enables the generation of electricity and production of clean microalgae biomass concurrently, in both light and dark conditions, utilizing wastewater as a nutrient source and renewable energy. The MFC chamber was filled with simulated potato processing wastewater, while the AC chamber contained microalgae Chlorella vulgaris in a growth medium. The ceramic membrane allowed nutrient diffusion while preventing direct contact between algae and wastewater. This design effectively supported algal growth and produced uncontaminated, harvestable biomass. At the same time, larger particulates and undesirable substances were retained in the MFC. The system can be operated with synergy between the MFC and AC systems, reducing operational and pretreatment costs. Overall, this hybrid design highlights a sustainable pathway for integrating electricity generation, nutrient recovery, and algae-based biofuel feedstock production, with improved economic feasibility due to high-quality biomass cultivation and the ability to operate continuously under variable lighting conditions. Full article

There is an increasing industrial demand for sustainable resources for lipid-based biofuels and platform chemical production. A promising, CO₂-efficient resource is autotrophically cultivated microalgae, either for direct single-cell oil (SCO) production or as a biomass substrate for fermentative SCO production via organisms like yeasts. Regarding the latter, chemical biomass hydrolysis typically results in high sugar yield and high salt concentrations due to the required neutralization prior to fermentation. In contrast, enzymatic hydrolysis is often lacking in mass efficiency. In this study, the enzymatic hydrolysis of both nutrient-replete and lipid-rich autotrophic Microchloropsis salina biomass was optimized, testing different pre-treatments and enzyme activities. Hereby, the protease treatment to weaken the cell wall integrity and the dosing of the Cellic CTec3 was identified to have the highest effect on hydrolysis efficiency. Sugar yields of 63% (nutrient-replete) and almost 100% (lipid-rich) could be achieved. The process was successfully scaled-up in mini bioreactors at a 250 mL scale. The resulting hydrolysate of the lipid-rich biomass was tested as a substrate of the oleaginous yeast Cutaneotrichosporon oleaginosus in a consumption-based acetic acid fed-batch setup. It outperformed both the model substrate and the glucose control, demonstrating the high potential of the hydrolysate as feedstock for yeast oil production. The presented sequential and circular SCO-producing value chain highlights the potential for mass- and space–time-efficient biofuel production, combining the autotrophic cultivation of oleaginous algae with decoupled yeast oil fermentation for the first time. Full article

The global population surge and continuously rising energy demand have led to the rapid depletion of fossil fuel reserves. Over-exploitation of non-renewable fuels is responsible for the emission of greenhouse gases, air pollution, and global warming, which causes serious health issues and ecological imbalance. The present study focuses on the potential of algae-based biofuel as an alternative energy source for fossil fuels. Algal biofuels are more environmentally friendly and economically reasonable to produce on a pilot scale compared to lignocellulosic-derived biofuels. Algae can be cultivated in closed, open, and hybrid photobioreactors. Notably, high-rate raceway ponds with the ability to recycle nutrients can reduce freshwater consumption by 60% compared to closed systems. The algal strain along with various factors such as light, temperature, nutrients, carbon dioxide, and pH is responsible for the growth of biomass and biofuel production. Algal biomass conversion through hydrothermal liquefaction (HTL) can achieve higher energy return on investments (EROI) than conventional techniques, making it a promising Technology Readiness Level (TRL) 5–6 pathway toward circular biorefineries. Therefore, algal-based biofuel production offers numerous benefits in terms of socio-economic growth. This review highlights the basic cultivation, dewatering, and processing of algae to produce biofuels using various methods. A simplified multicriteria evaluation strategy was used to compare various catalytic processes based on multiple performance indicators. We also conferred various advantages of an integrated biorefinery system and current technological advancements for algal biofuel production. In addition to this, policies and market regulations are discussed briefly. At the end, critical challenges and future perspectives of algal biorefineries are reviewed. Algal biofuels are environmentally friendly as well as economically sustainable and usually offer more benefits compared to fossil fuels. Full article

In recent years, biofuels and bioenergy derived from algae have gained increasing attention, fueled by the growing demand for renewable energy sources and the urgent need to lower CO₂ emissions. This research examines the generation of bioethanol and biomethane using freshly harvested and sedimented algal biomass. Employing a factorial experimental design, various trials were conducted, with ethanol yield as the primary optimization target. The findings indicated that the sodium hydroxide concentration during pretreatment and the amylase dosage in enzymatic hydrolysis were key parameters influencing the ethanol production efficiency. Under optimized conditions—using 0.3 M NaOH, 25 μL/g starch, and 250 μL/g cellulose—fermentation yielded ethanol concentrations as high as 2.75 ± 0.18 g/L (45.13 ± 2.90%), underscoring the significance of both enzyme loading and alkali treatment. Biomethane potential tests on the residues of fermentation revealed reduced methane yields in comparison with the raw algal feedstock, with a peak value of 198.50 ± 25.57 mL/g volatile solids. The integrated process resulted in a total energy recovery of up to 809.58 kWh per tonne of algal biomass, with biomethane accounting for 87.16% of the total energy output. However, the energy recovered from unprocessed biomass alone was nearly double, indicating a trade-off between sequential valorization steps. A comparison between fresh and dried feedstocks also demonstrated marked differences, largely due to variations in moisture content and biomass composition. Overall, this study highlights the promise of integrated algal biomass utilization as a viable and energy-efficient route for sustainable biofuel production. Full article

Concerns about sustainable energy sources arise due to the non-renewable nature of petroleum. Escalating demand for fossil fuels and price inflation negatively impact the energy security and economy of a country. The generation and usage of biofuel could be suggested as a sustainable alternative to fossil fuels. Several studies have investigated the potential of using edible crops for biofuel production. However, the usage of algae as suitable feedstock is currently being promoted due to its ability to withstand adverse environmental conditions, capacity to generate more oil per area, and potential to mitigate energy crises and climate change with no detrimental impact on the environment and food supply. Furthermore, the biorefinery approach in algae-based biofuel production controls the economy of algal cultivation. Hence, this article critically reviews different cultivation systems of algae with critical parameters including harvesting methods, intended algae-based biofuels with relevant processing techniques, other applications of valorized algal biomass, merits and demerits, and limitations and challenges in algae-based biofuel production. Full article

The processing of Kappaphycus alvarezii algae to obtain carrageenan (polysaccharide) generates a residue composed mainly of glucans and galactans that can be converted to monosaccharides, making these algae a renewable feedstock that can be used to produce biofuels. This residue was subjected to batch enzyme hydrolysis with different commercial enzymatic cocktails, achieving, after 72 h of reaction time, a complete conversion of glucan to glucose for all the cocktails used. A simple mathematical model, based on a semi-empirical approach, was proposed to describe the behavior of the experimental data. The temporal profile of glucose concentration was obtained by direct analytical integration of the mathematical model, resulting in an explicit equation as a time function. Estimation of the model parameters was carried out by non-linear regression, using the least squares criterion, together with the Levenberg–Marquardt method. The quality of the model fit was evaluated by specific statistical criteria, including Fisher’s F test, the R² value, and the p-value test. The accuracy of the model was considered acceptable (p-value < 0.05 and R² ≥ 0.98), enabling its use in subsequent studies aimed at improving the enzymatic hydrolysis process under similar experimental conditions. Full article

Microalgae have attracted wide attention due to their extensive application potential. Dewatering is a necessary work for the application of microalgae, especially in biofuel production, where forward osmosis (FO) research is relatively advanced but still faces technical bottlenecks hindering large-scale commercialization. Based on the current research in recent years, the research progress in the causes and control of membrane fouling, the development of membrane materials and optimization of membrane structure, and the energy saving and efficiency of the process are reviewed in this paper. We found that different species of algae have direct effects on membrane fouling. Chlorella vulgaris has a low membrane fouling trend, but the mechanisms of fouling need further investigation. The material development and structure optimization of membranes are the main research methods to reduce membrane fouling, but there are still some defects, such as complicated preparation and low water flux, which are difficult to apply on a large scale. The research progress of reducing costs by using seawater, urine, fertilizer, etc. as new draw solutions (DS) is reviewed. At present, many aspects of FO microalgae dewatering technology are still not well understood, and future research should focus on scaling up the existing technologies. Full article

The rapid growth of the world population led to an exponential growth in industrial activity all around the world. Consequently, CO₂ emissions have risen almost 400% since 1950 due to human activities. In this context, microalgae biomass has emerged as a renewable and sustainable feedstock for producing third-generation biofuels. This study explores the laboratory-scale production of bioethanol and biomethane from dried algal biomass. The first step was to evaluate and optimize the production of glucose from the biomass. Thus, three different techniques with three different solvents were tested to identify the most effective and efficient in terms of saccharification yield. With the assistance of an autoclave or a high-temperature water bath and 0.2 M NaOH as a solvent, yields of 79.16 ± 3.03% and 85.73 ± 3.23% were achieved which correspond to 9.24 and 9.80 g/L of glucose, respectively. Furthermore, the most efficient method from the pretreatment step was chosen to carry out a factorial design to produce bioethanol. The experiments showed that the loading of cellulase was of crucial importance to the optimization of the process. Optimized ethanolic fermentation yielded ethanol concentrations up to 4.40 ± 0.28 g/L (76.12 ± 4.90%) (0.3 Μ NaOH, 750 μL/g_cellulose and 65 μL/g_starch), demonstrating the critical role of cellulase loading. Biomethane potential (BMP) assays on fermentation residues showed increased yields compared to untreated feedstock, with a maximum methane yield of 217.88 ± 10.40 mL/gVS. Combined energy production from bioethanol and biomethane was calculated at up to 1044.48 kWh/tn of algae feedstock, with biomethane contributing 75.26% to the total output. These findings highlight the potential of integrated algae-based biorefineries to provide scalable and sustainable biofuel solutions, aligning with circular economy principles. Full article

Excessive emissions of greenhouse gases, primarily carbon dioxide (CO₂), have garnered worldwide attention due to their significant environmental impacts. Carbon capture, utilization, and storage (CCUS) techniques have emerged as effective solutions to address CO₂ emissions. Recently, direct air capture (DAC) and bioenergy with carbon capture and storage (BECCS) have been advanced within the CCUS framework as negative emission technologies. BECCS, which involves cultivating biomass for energy production, then capturing and storing the resultant CO₂ emissions, offers cost advantages over DAC. Algae-based CCUS is integral to the BECCS framework, leveraging algae’s biological processes to capture and sequester CO₂ while simultaneously contributing to energy production and potentially achieving net negative carbon emissions. Algae’s high photosynthetic efficiency, rapid growth rates, and ability to grow in non-arable environments provide significant advantages over other BECCS methods. This comprehensive review explores recent innovations in algae-based CCUS technologies, focusing on the mechanisms of carbon capture, utilization, and storage through algae. It highlights advancements in algae cultivation for efficient carbon capture, algae-based biofuel production, and algae-based dual carbon storage materials, as well as key challenges that need to be addressed for further optimization. This review provides valuable insights into the potential of algae-based CCUS as a key component of global carbon reduction strategies. Full article

The global transportation sector is transitioning towards renewable energy to combat climate change, with biodiesel playing a critical role. Significant research over the past decades has focused on enhancing biodiesel through novel feedstocks and production methods. The defense community, a major diesel consumer, is particularly interested in biodiesel to support national sustainability goals while also leveraging the benefits of the new technology, including the ability to produce biodiesel locally at the point of need. This paper sets out to review recent advances in biodiesel technology and aligning them with the needs of the defense communities. By doing so, this paper provides insight into the challenges, benefits, and technical feasibility for the two primary consumers of military diesel fuel—naval ships and ground vehicles. For naval applications, algae-based biodiesel shows promise due to its potential for local production near ports. Advances in genetic engineering and cultivation are crucial for increasing lipid content and reducing costs. Innovative methods such as microwave-assisted transesterification and artificial neural networks for optimization could further enhance economic viability. In military ground vehicles, locally produced biodiesel could sustain operations by minimizing supply chain dependencies. Efforts are ongoing to develop mobile production facilities and improve feedstock diversity and methanol-independent transesterification processes. Overall, advancements in biodiesel production from various feedstocks and innovative techniques are poised to significantly benefit the military sector, promoting sustainability and operational efficiency. Full article

Biofuels are clean and renewable energy resources gaining increased attention as a potential replacement for non-renewable petroleum-based fuels. They are derived from biomass that could either be animal-based or belong to any of the three generations of plant biomass (agricultural crops, lignocellulosic materials, or algae). Over 130 studies including experimental research, case studies, literature reviews, and website publications related to bioethanol production were evaluated; different methods and techniques have been tested by scientists and researchers in this field, and the most optimal conditions have been adopted for the generation of biofuels from biomass. This has ultimately led to a subsequent scale-up of procedures and the establishment of pilot, demo, and large-scale plants/biorefineries in some regions of the world. Nevertheless, there are still challenges associated with the production of bioethanol from lignocellulosic biomass, such as recalcitrance of the cell wall, multiple pretreatment steps, prolonged hydrolysis time, degradation product formation, cost, etc., which have impeded the implementation of its large-scale production, which needs to be addressed. This review gives an overview of biomass and bioenergy, the structure and composition of lignocellulosic biomass, biofuel classification, bioethanol as an energy source, bioethanol production processes, different pretreatment and hydrolysis techniques, inhibitory product formation, fermentation strategies/process, the microorganisms used for fermentation, distillation, legislation in support of advanced biofuel, and industrial projects on advanced bioethanol. The ultimate objective is still to find the best conditions and technology possible to sustainably and inexpensively produce a high bioethanol yield. Full article