Search Results (675)

Metal–organic frameworks (MOFs), particularly ZIF-8, have emerged as promising materials due to their high porosity, tunability, and chemical stability. In this study, we report the synthesis of ZnFe₂O₃-doped ZIF-8 composites with 10 wt% loading via a solvothermal method to enhance their optical and photocatalytic performance. Structural analyses confirmed the successful incorporation of ZnFe₂O₃ without disrupting the ZIF-8 framework. Optical studies revealed enhanced absorption in the visible range, a narrowed bandgap (4.26 eV vs. 4.37 eV for pristine ZIF-8), and an increased extinction coefficient, indicating superior light-harvesting potential. The photocatalytic activity was evaluated by methylene blue (MB) degradation under visible light, where the 10 wt% ZnFe₂O₃-ZIF-8 composite achieved 90% degradation efficiency, outperforming pristine ZIF-8 (67.8%). The catalyst also demonstrated excellent recyclability over five cycles and a proposed degradation mechanism involving ·OH and ·O₂⁻ radical formation. These findings demonstrate the potential of highly doped ZnFe₂O₃@ZIF-8 composites for environmental remediation and photonic applications. Full article

Water scarcity poses a formidable challenge around the world, especially in arid regions where limited availability of freshwater resources threatens both human well-being and ecosystem sustainability. Membrane-based desalination technologies offer a viable solution to address this issue by providing access to clean water. This work ultimately aims to develop a novel permselective polymeric membrane material to be employed in an electrochemical desalination system. This part of the study addresses the optimization, preparation, and characterization of a polyvinylidene difluoride (PVDF) polymeric membrane using the electrospinning technique. The membranes produced in this work were fabricated under specific operational, environmental, and material parameters. Five different additives and nano-additives, i.e., graphene oxide (GO), carbon nanotubes (CNTs), zinc oxide (ZnO), activated carbon (AC), and a zeolitic imidazolate metal–organic framework (ZIF-8), were used to modify the functionality and selectivity of the prepared PVDF membranes. Each membrane was synthesized at two different levels of additive composition, i.e., 0.18 wt.% and 0.45 wt.% of the entire PVDF polymeric solution. The physiochemical properties of the prepared membranes were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), zeta potential, contact angle, conductivity, porosity, and pore size distribution. Based on findings of this study, PVDF/GO membrane exhibited superior results, with an electrical conductivity of 5.611 mS/cm, an average pore size of 2.086 µm, and a surface charge of −38.33 mV. Full article

Aerogel sponges of bio-based polymers loaded with metal–organic frameworks (MOFs) are highly promising for environmental applications, but a central challenge is to improve their stability and efficiency for removal processes. Here, the effective incorporation of the MOFs MIL-100(Fe) and ZIF-8 in composite aerogels of chitosan–pectin–lactic acid is reported. The presence of pectin was critical to loading the MOFs efficiently and homogeneously, while the incorporation of lactic acid induced a large increase in the Young’s modulus and provided structural preservation in aqueous solutions. The presence of MOFs enhanced the removal of two dyes, methyl orange (MO) and methylene blue (MB), under batch and flow conditions, with removal efficiencies of methyl orange of about 85% and 90% when loaded with ZIF-8 and MIL-100(Fe), respectively. Bentonite, celite 545, and two ionenes were loaded for comparison. Factors beyond charge-to-charge electrostatic interactions influenced the removal, since no correlations were obtained between the electrical charges of dyes, fillers, and polymers. The kinetic data were analyzed by adapting the Langmuir kinetic model, incorporating absorption and desorption processes, which allowed the recovery of the respective rate constants. Full article

The electrocatalytic CO₂ reduction reaction (CO₂RR) offers an energy-saving and environmentally friendly approach to producing hydrocarbon fuels. The use of a gas diffusion electrode (GDE) flow cell has generally improved the rate of CO₂RR, while the gas diffusion layer (GDL) remains a significant challenge. In this study, we successfully engineered a novel metal–organic framework (MOF) heterojunction through the controlled coating of zeolitic imidazolate framework (ZIF-L) on ultrathin nickel—metal–organic framework (Ni-MOF) nanosheets. This innovative architecture simultaneously integrates GDL functionality and exposes abundant solid–liquid–gas triple-phase boundaries. The resulting Ni-MOF@ZIF-L heterostructure demonstrates exceptional performance, achieving a formate Faradaic efficiency of 92.4% while suppressing the hydrogen evolution reaction (HER) to 6.7%. Through computational modeling of the optimized heterojunction configuration, we further elucidated its competitive adsorption behavior and electronic modulation effects. The experimental and theoretical results demonstrate an improvement in electrochemical CO₂ reduction activity with suppressed hydrogen evolution for the heterojunction because of its hydrophobic interface, good electron transfer capability, and high CO₂ adsorption at the catalyst interface. This work provides a new insight into the rational design of porous crystalline materials in electrocatalytic CO₂RR. Full article

The electrocatalytic decomposition of ammonia represents a promising route for sustainable hydrogen production, yet current systems rely heavily on noble metal catalysts with prohibitive costs and limited durability. A critical challenge lies in developing non-noble electrocatalysts that simultaneously achieve high active site exposure, optimized electronic configurations, and robust structural stability. Addressing these requirements, this study strategically engineered Cu-doped ZIF-8 architectures via in situ growth on nickel foam (NF) substrates through a facile room-temperature hydrothermal synthesis approach. Systematic optimization of the Cu/Zn molar ratio revealed that Cu_0.7Zn_0.3-ZIF/NF achieved optimal performance, exhibiting a distinctive nanoflower-like architecture that substantially increased accessible active sites. The hybrid catalyst demonstrated superior electrocatalytic performance with a current density of 124 mA cm⁻² at 1.6 V vs. RHE and a notably low Tafel slope of 30.94 mV dec⁻¹, outperforming both Zn-ZIF/NF (39.45 mV dec⁻¹) and Cu-ZIF/NF (31.39 mV dec⁻¹). Combined XPS and EDS analyses unveiled a synergistic electronic structure modulation between Zn and Cu, which facilitated charge transfer and enhanced catalytic efficiency. A gas chromatography product analysis identified H₂ and N₂ as the primary gaseous products, confirming the predominant occurrence of the ammonia oxidation reaction (AOR). This study not only presents a noble metal-free electrocatalyst with exceptional efficiency and durability for ammonia decomposition but also demonstrates the significant potential of MOF-derived materials in sustainable hydrogen production technologies. Full article

Zeolites, microporous aluminosilicates with tuneable physicochemical properties, have garnered increasing attention in dermatology due to their antimicrobial, detoxifying, and drug delivery capabilities. This review evaluates the structural characteristics, therapeutic mechanisms, and clinical applications of zeolites—including clinoptilolite, ZSM-5, ZIF-8, and silver/zinc-functionalized forms—across skin infections, wound healing, acne management, and cosmetic dermatology. Zeolites demonstrated broad-spectrum antibacterial and antifungal efficacy, enhanced antioxidant activity, and biocompatible drug delivery in various dermatological models. Formulations such as silver–sulfadiazine–zeolite composites, Zn–clinoptilolite for acne, and zeolite-integrated microneedles offer innovative avenues for targeted therapy. Zeolite-based systems represent a promising shift toward multifunctional, localized dermatologic treatments. However, further research into long-term safety, formulation optimization, and clinical validation is essential to transition these materials into mainstream therapeutic use. Full article

Given the adverse effects of organic dyes from aqueous solutions on human physiology and the ecological system, establishing an effective system for their elimination is imperative. This study employs the in situ thermal (IST) method to synthesize nanocomposites comprising zeolitic imidazole frameworks, specifically Fe-ZIF-8 and Fe-ZIF-67. The investigation offers a comprehensive evaluation of the properties of these nano-adsorbents for the removal of malachite green (MG). The results indicate a significantly increased adsorption capacity of up to 495 and 552 mg g⁻¹ for Fe-ZIF-8 and Fe-ZIF-67, respectively. Furthermore, they demonstrate removal efficiencies of up to 90% and 95% for MG, respectively. Parameters associated with the adsorption process are derived from isotherms and removal kinetics, specifically the Freundlich model and the pseudo-second-order kinetics model, respectively. The enhanced adsorption capacity observed in Fe-ZIF-8 and Fe-ZIF-67 can be attributed to π–π stacking interactions, hydrogen bonding, and electrostatic attraction. After undergoing three cycles, both adsorbents consistently exhibit a high removal efficiency of approximately 85%, indicating notable structural integrity and outstanding potential for repeated use. The examined adsorbents display exceptional efficacy, favorable stability, and substantial specific surface area, underscoring their remarkable adsorption capabilities. The nanocomposites comprising Fe-ZIF-8 and Fe-ZIF-67 demonstrate considerable potential as highly favorable options for the elimination of MG and other cationic organic dyes from aqueous environments. Full article

Point-of-care testing (POCT) offers a transformative approach to diagnostics by enabling rapid and accurate results at or near the site of patient care. This is especially valuable in critical care, emergency settings, and resource-limited areas. However, one major limitation of POCT remains its analytical sensitivity, particularly in detecting low concentrations of analytes. To address this, various innovations are being explored, including advanced sensors, signal amplification, and sensitive labels. Among these, bioluminescent proteins have gained attention for their high sensitivity, fast readout, minimal background interference, and simplified instrumentation. Bioluminescence—light emission from biochemical reactions—presents an ideal platform for enhancing POCT sensitivity. In parallel, metal–organic frameworks (MOFs), especially structures like ZIF-8, are emerging as valuable materials in biosensing. Their high porosity, tunable surface properties, and ability to host biomolecules make them excellent candidates for improving analyte capture and signal transduction. When integrated with bioluminescent systems, MOFs can stabilize proteins, concentrate targets, and enhance overall assay performance. This review highlights the role of bioluminescent proteins in medical diagnostics and their application in POCT platforms. We also discuss the potential synergy between MOFs and bioluminescence to overcome current sensitivity limitations. Finally, we examine existing challenges and strategies to optimize these technologies for robust, field-deployable diagnostic tools. By leveraging both the natural sensitivity of bioluminescence and the structural advantages of MOFs, next-generation POCT systems can achieve superior performance, driving forward diagnostic accessibility and patient care outcomes. Full article

Metal–organic frameworks (MOFs) are a novel type of porous crystalline materials assembled from metal ions and organic linkers. Their derivatives can inherit characteristics such as high specific surface area, tunable porosity, and unique topological structures, which make MOF-derived metal oxides ideal catalysts for the selective catalytic reduction (SCR) of NO_x. This review focuses on the synthetic strategies of MOF-derived metal oxides and the latest progress of oxides derived from various typical MOFs materials (including MILs, ZIFs, UiO, BTC series, MOF-74, MOF-5, and Prussian blue analogs, etc.) in the catalytic reduction in NO_x, and analyzes the mechanisms for the enhanced catalytic performance. In addition, the challenges and prospects of MOF derivatives in catalytic applications are discussed. It is hoped that this review will help researchers understand the latest research progress of MOF-derived metal oxide materials in the catalytic removal of NO_x pollution. Full article

In this work, HNTs@ZIF-67 composites were synthesized using the in situ growth method and incorporated into 6FDA-TFMB to prepare mixed-matrix membranes (MMMs). Scanning electron microscope (SEM) and transmission electron microscope (TEM) proved that the HNTs@ZIF-67 composite not only retained the hollow structure of HNTs, but also formed a continuous ZIF-67 transport layer on the surface of HNTs. The results of gas permeability experiments showed that with the increase in HNTs@ZIF-67 incorporation, the He permeability and He/CH₄ selectivity of MMMs showed a trend of increasing first and then decreasing. When the loading is 5 wt%, the He permeability and He/CH₄ selectivity of MMMs reach 116 Barrer and 305, which are 22.11% and 79.41% higher than the pure 6FDA-TFMB membrane. The results of density functional theory (DFT) and Monte Carlo (MC) calculations reveal that He diffuses more easily inside ZIF-67, HNTs and 6FDA-TFMB than CH₄, and ZIF-67 shows larger adsorption energy with He than HNTs and 6FDA-TFMB, indicating that He is easily adsorbed by ZIF-67 in MMMs. Based on experimental and molecular simulation results, the mechanism of HNTs@ZIF-67 improving the He/CH₄ separation performance of MMMs was summarized. With the advantage of a smaller molecular kinetic diameter, He can diffuse through ZIF-67 on the tube orifice of HNTs@ZIF-67 and enter the HNTs’ hollow tube for rapid transmission. At the same time, He can also be rapidly transferred in the continuous ZIF-67 transport channel layer, which improves the He permeability and the He/CH₄ selectivity of MMMs. Full article

Kasugamycin (KSM) is easily affected by photolysis, acid–base destruction, and oxidative decomposition in the natural environment, leading to its poor durability and low effective utilization rate, which affects its control effect on plant bacterial diseases. Nanomaterials modified with environment-responsive agents enable the control of the release of pesticides through intelligently responding to external stimuli, thereby improving efficacy and reducing environmental impact. In this study, a pH-responsive controlled release system was constructed using zeolitic imidazolate frameworks (ZIF-93) for the sustained and targeted delivery of KSM. The synthesized KSM@ZIF-93 exhibited a diameter of 63.93 ± 11.19 nm with a drug loading capacity of 20.0%. Under acidic conditions mimicking bacterial infection sites, the Schiff base bonds and coordination bonds in ZIF-93 dissociated, triggering the simultaneous release of KSM and Zn²⁺, achieving a synergistic antibacterial effect. Light stability experiments revealed a 34.81% reduction in UV-induced degradation of KSM when encapsulated in ZIF-93. In vitro antimicrobial assays demonstrated that KSM@ZIF-93 completely inhibited Erwinia amylovora at 200 mg/L and had better antibacterial activity and persistence than KSM and ZIF-93. The field experiment and safety evaluation showed that the control effect of KSM@ZIF-93 on pear fire blight at the concentration of 200 mg/L was (75.19 ± 3.63)% and had no toxic effect on pollen germination. This pH-responsive system not only enhances the stability and bioavailability of KSM but also provides a targeted and environmentally compatible strategy for managing bacterial infections during the flowering period of pear trees. Full article

High permeance combined with high salt/dye separation efficiency is a prerequisite for achieving zero-liquid-discharge treatment of saline textile wastewater by membrane technology. Thin-film nanocomposite (TFN) membranes incorporating porous nanoparticles offer a promising route to overcome the permeability–selectivity trade-off of conventional polymer membranes. In this study, a vacuum-assisted method was used to co-blend ZIF-67 and SiO₂ nanoparticles, while branched polyethyleneimine (PEI) served as a cross-linking bridge, resulting in a high-performance TFN membrane for salt/dye separation. Acting as a molecular connector, PEI coordinated with ZIF-67 through metal–amine complexation and simultaneously formed hydrogen bonds with surface hydroxyl groups on SiO₂, thereby linking ZIF-67 and SiO₂. The resulting membrane exhibited good hydrophilicity and excellent dye separation performance (water flux = 359.8 L m⁻² h⁻¹ bar⁻¹; Congo Red rejection = 99.2%) as well as outstanding selectivity in dye/salt mixtures (Congo Red/MgCl₂ selectivity of 1094). The optimal ZIF@SiO₂-PEI membrane maintained stable dye rejection over a wide range of trans-membrane pressures, initial concentrations, and pH values. These results reveal the huge potential of applying the ZIF@SiO₂-PEI TFN membranes for resource recovery in sustainable textile wastewater systems. Full article

Background/Objectives: Antibiotic contamination in water sources is a growing global concern, contributing to environmental degradation and the proliferation of antimicrobial resistance. Traditional treatment methods, such as advanced oxidation or high-pressure membrane processes, are often energy-intensive and economically unsustainable for large-scale or decentralized applications. This study explores the potential of two cost-effective, commercially available metal–organic frameworks (MOFs), ZIF-8 and F300, to improve the performance of membrane-based filtration–adsorption systems for removing tetracycline and sulfadiazine from water. Methods: Batch adsorption experiments were performed to evaluate the uptake capacities, kinetics, and isotherms of both MOFs toward the selected antibiotics. The membranes were modified using a low-cost silane-assisted deposition of MOF particles and tested in a microfiltration system. Removal efficiencies and water permeability were assessed and kinetic and isotherm models were applied to understand the adsorption mechanisms. Results: ZIF-8 showed superior adsorption performance, with maximum capacities of 442.2 mg/g for tetracycline and 219.3 mg/g for sulfadiazine. F300 was effective only for tetracycline. Membranes modified with ZIF-8 improved pharmaceutical removal by 187% (tetracycline) and 224% (sulfadiazine) compared to unmodified membranes. Although permeability decreased due to increased hydrophobicity, the materials and processes remained economically favorable. Conclusions: This study demonstrates that MOF-modified ceramic membranes, particularly those incorporating ZIF-8, offer a low-cost, scalable, and energy-efficient alternative for pharmaceutical removal from water. The approach combines strong environmental impact with economic viability, making it attractive for broader implementation in water treatment systems. Full article

Marine biofouling, the process of marine microorganisms, algae, and invertebrates attaching to and forming biofilms on ship hulls, underwater infrastructure, and marine equipment in ocean environments, severely impacts shipping and underwater operations by increasing fuel consumption, maintenance costs, and corrosion risks, and by threatening marine ecosystem stability via invasive species transport. This study reports the development of a hydrogel-metal-organic framework (MOF)-quorum sensing inhibitor (QSI) antifouling coating on 304 stainless steel (SS) substrates. Inspired by mussel adhesion, a hydrophilic bionic hydrogel was first constructed via metal ion coordination. The traditional metal ion source was replaced with a zeolitic imidazolate framework-8 (ZIF-8) loaded with 2-(5H)-furanone (HF, a QSI) without altering coating formation. Physicochemical characterization using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), the Brunauer–Emmett–Teller (BET) method, and the diffraction of x-rays (XRD) confirmed successful HF loading into ZIF-8 with intact crystal structures. Antifouling tests showed HF@ZIF-8 enhanced antibacterial inhibition against Staphylococcus aureus (97.28%) and Escherichia coli (>97%) and suppressed Chromobacterium violaceum CV026 pigment synthesis at 0.25 mg/mL (sub-growth concentration). The reconstructed PG/PVP/PEI/HF@ZIF-8 coating achieved 72.47% corrosion inhibition via synergistic anodic protection and physical shielding. This work provides a novel green approach for surface antifouling and drag reduction, highlighting MOF-loaded QSIs as promising additives to enhance the antifouling performance of hydrogel coatings, anti-corrosion performance, and QSI performance for sustainable marine engineering applications. Full article

The oxygen evolution reaction (OER) is pivotal in hydrogen production via water electrolysis, yet its sluggish kinetics, stemming from the four-electron transfer process, remain a major obstacle, with overpotential reduction being critical for enhancing efficiency. This work addresses this challenge by developing a novel approach to stabilize and activate non-precious metal catalysts for OER. Specifically, we synthesized a three-dimensional flake NiFe-LDH/ZIF-L composite catalyst on a flexible nickel foam (NF) substrate through a room temperature soaking and hydrothermal method, leveraging the mesoporous structure of ZIF-L to increase the specific surface area and optimizing electron transfer pathways via interfacial regulation. Continuous linear sweep voltammetry (LSV) scanning induced structural self-reconstruction, forming highly active NiOOH species enriched with oxygen vacancies, which significantly boosted catalytic performance. Experimental results demonstrate an overpotential of only 221 mV at 10 mA cm⁻² and a Tafel slope of 56.3 mV dec⁻¹, alongside remarkable stability, attributed to the catalyst’s hierarchical nanostructure that accelerates mass diffusion and charge transfer. The innovation lies in the synergistic effect of the mesoporous ZIF-L structure and interfacial regulation, which collectively enhance the catalyst’s activity and durability, offering a promising strategy for advancing large-scale water electrolysis hydrogen production technology. Full article