Search Results (1,723)

Platinum has emerged as an optimal catalyst for the selective hydrogenation of nitroarenes owing to its high hydrogenation activity, selectivity, and stability. In this study, we report the fabrication of platinum nanoparticles stabilized on a composite support consisting of gum acacia polymer (GAP) and TiO₂. It was engineered for the targeted reduction of nitroarenes to arylamines via selective hydrogenation in methanol at ambient temperature. The non-toxic and biocompatible properties of GAP enable it to act as a reducing and stabilizing agent during synthesis. The synthesized nanocatalyst was characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Morphological and structural analyses revealed that the fabricated catalyst consisted of minuscule Pt nanoparticles integrated within the GAP framework, accompanied by the corresponding TiO₂ nanoparticles. Inductively coupled plasma optical emission spectrometry (ICP-OES) was employed to ascertain the Pt content. The mild reaction conditions, decent yields, trouble-free workup, and facile separation of the catalyst make this method a clean and practical alternative to nitroreduction. Selective hydrogenation yielded an average arylamine production of 97.6% over five consecutive cycles, demonstrating the stability of the nanocatalyst without detectable leaching. Full article

The rise of multidrug-resistant Pseudomonas aeruginosa underscores the need for novel therapeutic targets beyond conventional peptidoglycan biosynthesis. Some bacterial strains bypass MurA inhibition by fosfomycin via a cell wall salvage pathway. This study targeted P. aeruginosa AmgK (PaAmgK) and MurU (PaMurU) to identify inhibitors that could complement fosfomycin therapy. A malachite-green-based dual-enzyme assay enabled efficient activity measurements and high-throughput chemical screening. Screening 232 compounds identified Congo red and CTAB as potent PaMurU inhibitors. A targeted mass spectrometric analysis confirmed the selective inhibition of PaMurU relative to that of PaAmgK. Molecular docking simulations indicate that Congo red preferentially interacts with PaMurU through electrostatic contacts, primarily involving the residues Arg28 and Arg202. The binding of Congo red to PaMurU was corroborated further using SUPR-differential scanning fluorimetry (SUPR-DSF), which revealed ligand-induced thermal destabilization. Ongoing X-ray crystallographic studies, in conjunction with site-directed mutagenesis and enzyme kinetic analyses, aim to elucidate the binding mode at an atomic resolution. Full article

Hazelnut (Corylus avellana L.) is a significant global agricultural product due to its high economic and nutritional worth. The traditional methods used to measure the hazelnut kernel percentage for quality assessment are often time-consuming, expensive, and prone to human errors. Inaccurate measurements can adversely impact the market value, shelf life, and industrial applications of hazelnuts. This research introduces a novel system for calculating hazelnut kernel percentage utilizing a non-destructive X-ray imaging technique along with deep learning methods to assess hazelnut quality more efficiently and reliably. An image dataset of hazelnut kernels has been developed using X-ray technology, and defective areas are identified employing YOLOv7 architecture. Additionally, a novel bounding box regression technique called DCIoU and an algorithm for Neighborhood Relationship have been introduced to enhance object detection capabilities and to improve the selection of the target box with greater precision, respectively. The performance of these proposed methods has been evaluated using both the created hazelnut dataset and the COCO-128 dataset. The results indicate that the system can serve as a valuable tool for measuring hazelnut kernel percentages by accurately identifying defects in hazelnuts. Full article

100 nm thick TiO₂/TiN bilayers with varying thickness ratios were deposited via reactive sputtering of a Ti target in controlled oxygen and nitrogen atmospheres. Post-deposition annealing in air at 600 °C was performed to induce nitrogen diffusion through the oxygen-deficient TiO₂ layer. The resulting changes in morphology and chemical environment were investigated in detail using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis spectroscopy. Detailed TEM and XPS analyses have confirmed nitrogen diffusion across the TiO₂ layer, with surface nitrogen concentration and the ratio of interstitial to substitutional nitrogen dependent on the TiO₂/TiN mass ratio. Optical studies demonstrated modifications in optical constants and a reduction of the effective bandgap from 3.2 eV to 2.6 eV due to new energy states introduced by nitrogen doping. Changes in surface free energy induced by nitrogen incorporation showed a correlation to nitrogen doping sites on the surface, which had positive effects on overall photocatalytic activity. Photocatalytic activity, assessed through methylene blue degradation, showed enhancement attributed to nitrogen doping. Additionally, deposition of a 5 nm gold layer on the annealed sample enabled investigation of synergistic effects between nitrogen doping and gold incorporation, resulting in further improved photocatalytic performance. These findings establish the TiO₂/TiN bilayer as a versatile platform for supporting thin gold films with enhanced photocatalytic properties. Full article

In this study, we demonstrated that lrp6a, a co-receptor in the Wnt signaling pathway, is essential for proper median fin formation and somitogenesis in goldfish. We analyzed the gene’s sequence features and expression patterns in both wen-type and egg-type goldfish, uncovering distinct tissue-specific expression differences between the two varieties. To explore the functional role of lrp6a, we performed CRISPR/Cas9-mediated gene knockout using eight designed single-guide RNAs (sgRNAs), of which four showed effective targeting. Three high-efficiency sgRNAs were selected and co-injected into embryos to achieve complete gene disruption. Morphological assessments and X-ray microtomography (μCT) imaging of the resulting mutants revealed various abnormalities, including defects in the dorsal, caudal, and anal fins, as well as skeletal deformities near the caudal peduncle. These results confirm that lrp6a plays a key role in median fin development and axial patterning, offering new insights into the genetic regulation of fin formation in teleost fish. Full article

Magnetotactic bacteria (MTB), a unique group of Gram-negative prokaryotes, have the remarkable ability to biomineralize magnetic nanoparticles (MNPs) intracellularly, making them promising candidates for various biomedical applications such as biosensors, drug delivery, imaging contrast agents, and cancer-targeted therapies. To fully exploit the potential of MTB, a precise understanding of the structural, surface, and functional properties of these biologically produced nanoparticles is required. Given these concerns, this review provides a focused synthesis of the most widely used microscopic and spectroscopic methods applied in the characterization of MTB and their associated MNPs, covering the latest research from January 2022 to May 2025. Specifically, various optical microscopy techniques (e.g., transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM)) and spectroscopic approaches (e.g., localized surface plasmon resonance (LSPR), surface-enhanced Raman scattering (SERS), and X-ray photoelectron spectroscopy (XPS)) relevant to ultrasensitive MTB biosensor development are herein discussed and compared in term of their advantages and disadvantages. Overall, the novelty of this work lies in its clarity and structure, aiming to consolidate and simplify access to the most current and effective characterization techniques. Furthermore, several gaps in the characterization methods of MTB were identified, and new directions of methods that can be integrated into the study, analysis, and characterization of these bacteria are suggested in exhaustive manner. Finally, to the authors’ knowledge, this is the first comprehensive overview of characterization techniques that could serve as a practical resource for both younger and more experienced researchers seeking to optimize the use of MTB in the development of advanced biosensing systems and other biomedical tools. Full article

The Shapley Supercluster, one of the largest and most massive structures in the nearby (redshift $z\le 0.1$) Universe, located approximately 200 Mpc away, is a unique laboratory for high-energy astrophysics. Galaxy clusters that comprise it are promising targets for multimessenger study due to the presence in the intracluster medium of the necessary conditions for the acceleration of cosmic rays up to ultra-high energies and the generation by them of non-thermal electromagnetic and neutrino emission. Using the Shapley Supercluster’s observational data from the recent eROSITA-DE Data Release, we recover the physical parameters of 45 X-ray luminous galaxy clusters and calculate the expected multiwavelength—from radio to very-high-energy γ-ray as well as neutrino emission, with a particular focus on hadronic interactions of accelerated cosmic ray nuclei with the nuclei of the intracluster medium. The results obtained allow verification of cluster models based on multimessenger observations of clusters, especially in $\gamma$-ray (Fermi-LAT, H.E.S.S., CTAO-South for the Shapley Supercluster case), and neutrino (Ice Cube, KM3NeT). We also estimate the ability of the Shapley Supercluster to manifest as cosmic Zevatrons and show that it can contribute to the PAO Hot Spot in the Cen A region at UHECR energies over 50 EeV. Full article

Due to the complex mineral composition, low clay content, and strong heterogeneity of the mixed sedimentary shale in the Xinjiang Salt Lake Basin, the wettability characteristics of the reservoir and their influencing factors are not yet clear, which restricts the evaluation of oil-bearing properties and the identification of sweet spots. This paper analyzed mixed sedimentary shale samples from the Lucaogou Formation of the Jimsar Sag and the Fengcheng Formation of the Mahu Sag. Methods such as petrographic thin sections, X-ray diffraction, organic matter content analysis, and argon ion polishing scanning electron microscopy were used to examine the lithological and mineralogical characteristics, geochemical characteristics, and pore space characteristics of the mixed sedimentary shale reservoir. Alternating imbibition and nuclear magnetic resonance were employed to quantitatively characterize the wettability of the reservoir and to discuss the effects of compositional factors, lamina types, and pore structure on wettability. Research findings indicate that the total porosity, measured by the alternate imbibition method, reached 72% of the core porosity volume, confirming the effectiveness of alternate imbibition in filling open pores. The Lucaogou Formation exhibits moderate to strong oil-wet wettability, with oil-wet pores predominating and well-developed storage spaces; the Fengcheng Formation has a wide range of wettability, with a higher proportion of mixed-wet pores, strong heterogeneity, and weaker oil-wet properties compared to the Lucaogou Formation. TOC content has a two-segment relationship with wettability, where oil-wet properties increase with TOC content at low TOC levels, while at high TOC levels, the influence of minerals such as carbonates dominates; carbonate content shows an “L” type response to wettability, enhancing oil-wet properties at low levels (<20%), but reducing it due to the continuous weakening effect of minerals when excessive. Lamina types in the Fengcheng Formation significantly affect wettability differentiation, with carbonate-shale laminae dominating oil pores, siliceous laminae contributing to water pores, and carbonate–feldspathic laminae forming mixed pores; the Lucaogou Formation lacks significant laminae, and wettability is controlled by the synergistic effects of minerals, organic matter, and pore structure. Increased porosity strengthens oil-wet properties, with micropores promoting oil adsorption through their high specific surface area, while macropores dominate in terms of storage capacity. Wettability is the result of the synergistic effects of multiple factors, including TOC, minerals, lamina types, and pore structure. Based on the characteristic that oil-wet pores account for up to 74% in shale reservoirs (mixed-wet 12%, water-wet 14%), a wettability-targeted regulation strategy is implemented during actual shale development. Surfactants are used to modify oil-wet pores, while the natural state of water-wet and mixed-wet pores is maintained to avoid interference and preserve spontaneous imbibition advantages. The soaking period is thus compressed from 30 days to 3–5 days, thereby enhancing matrix displacement efficiency. Full article

The flexible transparent conductive films (TCFs) of a ZnS/Cu/Ag/TiO₂ multilayered structure were deposited on a flexible PET substrate with high surface roughness using magnetic sputtering, and the effects of structural characteristics on the performance of the films were analyzed. The TCFs with TiO₂/Cu/Ag/TiO₂ and ZnS/Cu/Ag/ZnS symmetric structures were also prepared for comparison. The TCF samples were deposited using ZnS, TiO₂, Cu and Ag targets, and they were analyzed using scanning electronic microscopy, atomic force microscopy, grazing incidence X-ray diffraction, spectrophotometry and a four-probe tester. The TCFs exhibit generally uniform surface morphology, excellent light transmittance and electrical conductivity with optimized structure. The optimal values are 84.40%, 5.52 Ω/sq and 33.19 × 10⁻³ Ω⁻¹ for the transmittance, sheet resistance and figure of merit, respectively, in the visible spectrum. The satisfactory properties of the asymmetric multilayered TCF deposited on a rough-surface substrate should be mainly attributed to the optimized structure parameters and reasonable interfacial compatibilities. Full article

In this work, the development of Al-based metal matrix composites (MMCs) is achieved using hybrid SiC and ZrO₂ reinforcement particles for automotive applications. Powder metallurgy (PM) is employed with various combinations of important process parameters for the fabrication of MMCs. MMCs were characterized using scanning electron microscopy (SEM), X-ray diffractometry (XRD), and a microhardness study. All XRD graphs adequately exhibit Al, SiC, and ZrO₂ peaks, indicating that the hybrid MMC products were satisfactorily fabricated with appropriate mixing and sintering at all the considered fabrication conditions. Also, no impurity peaks were observed, confirming high composite purity. MMC products in all the XRD patterns, suitable for the desired applications. According to the SEM investigation, SiC and ZrO₂ reinforcement components are uniformly scattered throughout Al matrix in all produced MMC products. The occurrence of Al, Si, C, Zr, and O in EDS spectra demonstrates the effectiveness of composite ball milling and sintering under all manufacturing conditions. Moreover, an increase in interfacial bonding of fabricated composites at a higher sintering temperature indicated improved physical properties of the developed MMCs. The highest microhardness value is 86.6 HVN amid all the fabricated composites at 7% silica, 14% zirconium dioxide, 500° sintering temperature, 90 min sintering time, and 60 min milling time. An integrated Particle Swarm Optimization–Support Vector Machine (PSO-SVM) model was developed to predict microhardness based on the input parameters. The model demonstrated strong predictive performance, as evidenced by low values of various statistical metrics for both training and testing datasets, highlighting the PSO-SVM model’s robustness and generalization capability. Specifically, the model achieved a coefficient of determination of 0.995 and a root mean square error of 0.920 on the training set, while on the testing set, it attained a coefficient of determination of 0.982 and a root mean square error of 1.557. These results underscore the potential of the PSO-SVM framework, which can be effectively leveraged to optimize process parameters for achieving targeted microhardness levels for the developed Al-SiC-ZrO₂ Composites. Full article

Soluble solids content (SSC) in fruits, as one of the key indicators of fruit quality, plays a critical role in postharvest quality assessment and grading. While traditional destructive methods can provide precise measurements of sugar content, they have limitations such as damaging the fruit’s integrity and the inability to perform rapid detection. In contrast, non-destructive detection technologies offer the advantage of preserving the fruit’s integrity while enabling fast and efficient sugar content measurements, making them highly promising for applications in fruit quality detection. This review summarizes recent advances in non-destructive detection technologies for fruit sugar content measurement. It focuses on elucidating the principles, advantages, and limitations of mainstream technologies, including near-infrared spectroscopy (NIR), X-ray technology, computer vision (CV), electronic nose (EN) technology and so on. Critically, our analysis identifies key challenges hindering the broader implementation of these technologies, namely: the integration and optimization of multi-technology approaches, the development of robust intelligent and automated detection systems, and issues related to high equipment costs and barriers to widespread adoption. Based on this assessment, we conclude by proposing targeted future research directions. These focus on overcoming the identified challenges to advance the development and practical application of non-destructive SSC detection technologies, ultimately contributing to the modernization and intelligentization of the fruit industry. Full article

In the present research, metal–organic framework-5 (MOF-5) was synthesized and loaded with zerumbone (ZER@MOF-5), followed by the evaluation of its anticancer, antibacterial, antifungal, DNA-binding, and free radical scavenging potentials. The synthesized nanoparticles were characterized using X-ray diffraction, ultraviolet–visible spectroscopy, Fourier-transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. The in vitro anticancer activity of ZER@MOF-5 was studied in a human breast cancer cell line (MCF-7) using the CCK-8 assay. The interaction of ZER@MOF-5 with pBR322 plasmid DNA was assessed by gel electrophoresis. The antimicrobial effect of ZER@MOF-5 was examined in gram-positive and gram-negative bacterial strains and yeast strains using the microdilution method. The free radical scavenging activity was assessed using the DPPH assay. Cytotoxicity assay revealed a notable enhancement in the anticancer activity of zerumbone upon its encapsulation into MOF-5. The IC₅₀ value for ZER@MOF-5 was found to be 57.33 µg/mL, which was lower than that of free zerumbone (IC₅₀: 89.58 µg/mL). The results of the DNA-binding experiment indicate that ZER@MOF-5 can bind to target DNA and cause a conformational change in DNA. The results of the antibacterial activity experiment showed that the antibacterial ability of ZER@MOF-5 was limited compared to free zerumbone. The results of the DPPH assay demonstrated that the antioxidant activity of free zerumbone was higher than that of ZER@MOF-5. MOFs encapsulate compounds within their porous crystalline structure, which leads to prolonged circulation time compared to single ligands. Although the unique structure of MOFs may limit their antibacterial and antioxidant activity in the short term, it may increase therapeutic efficacy in the long term. However, to fully understand the long-term antibacterial and antioxidant effects of the ZER@MOF-5, further comprehensive in vitro and in vivo experiments are necessary. This finding indicates that the MOF-5 could potentially be an impressive carrier for the oral administration of zerumbone. Full article

By adjusting NiCr target power, five CrNiBN coatings with different Ni contents were fabricated on 45 steel by magnetron sputtering with the aim of improving corrosion resistance of CrBN coatings in seawater. The structure and morphology of CrNiBN coatings were characterized by X-ray diffraction and scanning electron microscope, while its electrochemical properties were evaluated by open circuit potential, electrochemical impedance spectroscopy, and potential dynamic polarization. The results demonstrated that Ni incorporation could reduce the surface porosity of CrBN coatings from 16.8% to 7.7% as Ni content increased from 4.35 at% to 19.62 at%. On this basis, when Ni increased from 4.35 at% to 7.28 at%, self-corrosion potential gradually increased, which prompted the CrNiBN coating with 7.28 at% Ni to present the highest charge transfer resistance R_ct of 1.965 × 10⁴ Ω·cm² and the highest polarization resistance R_p of 74.9 kΩ·cm². However, more Ni doping from 12.54 at% to 19.62 at% would decrease self-corrosion potential and trigger oxidation. Consequently, the CrNiBN coatings with Ni content from 12.54 at% to 19.62 at% presented decreasing R_ct and R_p. Even so, the corrosion resistance of the CrNiBN coating was still better than that of CrBN coating indicating an improved corrosion inhibition efficiency by 12.53 times. Full article

Target compound 3′H-spiro[dibenzo[c,h]xanthene-7,1′-isobenzofuran]-3′-one (1) has long been known to be a by-product obtained from the preparation of naphtholphthalein. The structure of compound 1 was elucidated in the early 20th century; however, this compound has not previously been fully characterized using modern techniques. In this report, ¹H NMR and ¹³C NMR spectra are provided. X-ray crystallography is also used to characterize the title compound for the first time. Full article

Sex-specific differences in the prevalence of sarcopenia, dynapenia, and the impact of obesity on muscle strength and quality in patients with chronic kidney disease (CKD) remain underexplored. Background/Objectives: In this cross-sectional study, 78 adults with stage 5 CKD undergoing thrice-weekly maintenance hemodialysis in Brazil (44 men, 34 women; mean ± SD age = 57.55 ± 4.06 years) were assessed. Anthropometry (BMI, waist circumference, waist-to-height ratio), dual-energy X-ray absorptiometry, circulating IL-6, Timed Up and Go, handgrip strength (Jamar ^® dynamometer), and muscle quality index (MQI = handgrip/BMI) were obtained. Dynapenia (handgrip < 27 kg men and < 16 kg women) and sarcopenia (1.0 kg/kg for men and 0.56 kg/kg for women) were classified using EWGSOP2-2018 and FNIH thresholds. Results: Compared with reference values, men showed markedly reduced muscle strength and muscle quality (men: handgrip 21.3 ± 5.1 kg; MQI 0.80 ± 0.23 AU) than women. Also, men were 5.1 times more likely to present with dynapenia (88.6%; 95% CI 2.28–11.60) and 3.15 times more likely to present with sarcopenia (75.0%; 95% CI 1.88–5.30) than women. Waist circumference, waist-to-height ratio, BMI, and body fat % correlated inversely with MQI in both sexes (p ≤ 0.01) and with handgrip strength in men (p ≤ 0.01) but not in women. Conclusions: Among hemodialysis patients, men exhibit a substantially higher burden of dynapenia and sarcopenia than women and excess adiposity is independently associated with poorer muscle quality in both sexes. These findings highlight the need for sex-specific screening cut-offs and integrated strategies targeting both muscle dysfunction and central obesity in CKD management. Full article