Search Results (1,122)

In order to reduce fungal contamination in grapes and increase the dehydration rate for producing raisins, the development of alternative technologies that do not compromise product safety and quality is required. This study examined the impact of innovative pre-drying methods using aqueous ozone (10 min-4.1 mg O₃ L⁻¹) and UV-C light (30.3 kJ m⁻² UV-C) on the incidence of Aspergillus carbonarius, as well as on air-drying kinetics and ultrastructure of epicuticular waxes in Sultanina grapes, when applied either individually or sequentially. The effect of the pre-treatments on the colour of the dehydrated grapes was also assessed. Grapes pre-treated with 30.3 kJ m⁻² UV-C and 10 min-4.1 mg O₃ L⁻¹ + 30.3 kJ m⁻² UV-C showed a lower incidence of A. carbonarius in storage at 20 ± 1 °C than those exposed to aqueous ozone (30 and 8% lower infection compared to the non-pretreated fruit at 15-day storage, respectively). Although the combined pre-treatment did not significantly improve the fungus inhibition with respect to the individual UV-C application, it allowed a higher dehydration rate during the drying process at 60 ± 1 °C. The drying time was reduced by ~31% compared to non-pretreated fruit, a result slightly lower than that achieved with the traditional chemical pre-treatment of ethyl oleate-K₂CO₃ (~39%). This enhancement in drying rate was partly attributed to marked alterations in the grape’s epicuticular wax layer. UV-C and the combined pre-treatment helped in reducing the browning of raisins. Therefore, the combined application of ozone and UV-C light could be an environmentally friendly alternative for both improving the microbiological quality of grapes and accelerating the drying process. Full article

Esteya vermicola is a nematophagous fungus with strong parasitic ability against the pinewood nematode (Bursaphelenchus xylophilus) and shows great potential for the biological control of pine wilt disease. However, this fungus is highly sensitive to environmental stress factors and often exhibits early necrosis when cultured on conventional nutrient-rich media, limiting its large-scale application. In this study, we optimized the long-term cultivation and conidiation conditions of E. vermicola CBS115803 by supplementing minimal medium (MM) with amino acids, and evaluated its stress tolerance and infectivity against the pinewood nematode. Among 20 tested amino acids, histidine significantly increased total conidia production, while arginine, glutamine, and proline markedly promoted the formation of lunate conidia. The combination of arginine, histidine, glutamine, and proline (AHGP) produced the highest overall conidia yield and lunate conidia proportion. The MM + AHGP medium maintained long-term colony viability, whereas colonies on PDA and CM media showed obvious degeneration. This formulation also improved mycelial growth, total conidiation, and the proportion of lunate conidia. Moreover, conidia produced on MM + AHGP exhibited the highest germination rates and infectivity under various stress conditions, including cold, heat, oxidative, osmotic, and UV stresses. Conidia germination was significantly enhanced following treatment at 0 °C, suggesting that low temperatures may activate dormancy-breaking pathways. This amino acid-optimized medium offers an effective technical foundation for stable large-scale production and storage of E. vermicola conidia, providing a new avenue for the biocontrol of pine wilt disease. Full article

Polymer-based drug delivery systems offer robust opportunities to improve chemotherapy performance while mitigating systemic toxicity, a critical challenge in leukemia treatment. In this study, poly(ε-caprolactone) (PCL) microparticles were developed as carriers for the co-delivery of cytarabine (ARA-C), a frontline antileukemic agent, and a pecan-derived polyphenolic extract (PRE) as a complementary bioactive component. Microparticles were prepared by a double emulsion solvent evaporation method and formulated with varying drug and extract loadings. The systems were characterized in terms of morphology, particle size, colloidal properties, encapsulation efficiency, and chemical composition using optical microscopy, scanning electron microscopy, dynamic light scattering, zeta potential analysis, UV–Vis spectroscopy, Folin–Ciocalteu assay, and FTIR spectroscopy. In vitro release studies revealed sustained and formulation-dependent release profiles for both ARA-C and PRE, which were successfully fitted to kinetic models, indicating diffusion- and matrix-controlled release mechanisms. Additionally, preliminary cell viability assays using fibroblasts supported the cytocompatibility of the formulations. The results support the use of PCL-based microparticles as reproducible polymeric systems for the co-encapsulation and controlled release of cytarabine and polyphenol-rich extracts, contributing to the development of combination delivery approaches relevant to leukemia treatment. Full article

Sunlight exposure contributes to human health; however, excessive light exposure to skin, especially ultraviolet B (UV-B), can produce high amounts of reactive oxygen species (ROS) and induce inflammation. Some antioxidants, such as squalene, can prevent UV-B-induced inflammation. C₃₄H₅₈ botryococcene is the most common triterpene hydrocarbon produced by green alga Botryococcus braunii; it is biosynthesized via a pathway similar to squalene and appears to have a similar chemical structure to squalene. However, there are no reports on the bioactivity of botryococcene. In this study, we evaluated that botryococcene can prevent the skin photoaging. Using ESR assay, botryococcene could not scavenge any ROS. However, treatment of epidermis cells with the botryococcene significantly suppressed intracellular ROS production by hydrogen peroxide (H₂O₂) and attenuated H₂O₂ cytotoxicity. Botryococcene enhanced the antioxidant enzymes in gastric cells, thus botryococcene may scavenge ROS indirectly, not directly. Moreover, botryococcene inhibited production of intracellular interleukin-1 and exhibited suppression of melanogenesis activity by UV-B irradiation. Addition of botryococcene-treated epidermal cells culture medium mitigated the increase in matrix metalloproteinase-1 production and the decrease in type I collagen production induced by UV-B irradiation in dermis cells. These results showed that botryococcene has anti-photoaging effects, including preventing wrinkles and blemishes on the skin. Full article

This study reports the sustainable synthesis and thermal, morphological, and structural characterization of multifunctional silver/hydroxyapatite nanocomposite prepared from recycled caprine bone. The organic extract from caprine bone was characterized using Fourier Transform Infrared (FTIR) and Ultraviolet–Visible Spectroscopy (UV-Vis). The biogenic hydroxyapatite (CHAP) and its silver composite (Ag@CHAP) were characterized using thermal gravimetric analysis (TGA), Raman spectra, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and transmission electron microscope (TEM). The photocatalytic activity of Ag@CHAP was quantitatively confirmed through the degradation of Crystal Violet (5 ppm) under sunlight, achieving a high removal efficiency of 99.8% under optimum conditions, demonstrating significant potential for wastewater remediation. Ag@CHAP also demonstrated enhanced antimicrobial activity compared with CHAP and showed broad-spectrum efficacy against clinical human isolates P. aeruginosa ATCC 10145, E. coli ATCC 35218, S. aureus ATCC 25923, and C. albicans (human isolate). The in vitro hemolytic-activity assays revealed that both CHAP and Ag@CHAP had no hemolytic activity after 24 h of red blood cells incubation and effectively reduced lead-induced hemolysis from 86.73% to 39.35% and 49.13%, respectively. These findings confirm CHAP and Ag@CHAP as stable, biocompatible, and high-performance materials with promising applications in the sustainable water-treatment and biomedical fields. Full article

TiO₂ nanoparticles were synthesized by a simple sol–gel route followed by high-temperature calcination at 800 °C, aiming to obtain an anatase-dominant reference photocatalyst with enhanced structural stability after severe thermal treatment. Raman spectroscopy and X-ray diffraction confirmed that anatase is the major crystalline phase, with only a minor rutile contribution after calcination at 800 °C. Nitrogen adsorption–desorption measurements revealed a narrow mesoporous contribution arising from interparticle voids and a relatively high specific surface area (108 m² g⁻¹) despite the severe thermal treatment, while electron microscopy showed nanometric primary particles assembled into compact agglomerates. Surface hydroxyl groups were identified by Fourier-transform infrared spectroscopy, consistent with sol–gel-derived TiO₂ systems. Diffuse reflectance UV–Vis spectroscopy combined with Kubelka–Munk and Tauc analysis yielded an optical band gap of 3.12 eV, typical of anatase TiO₂. Methylene blue (MB) was used as a probe molecule to evaluate photocatalytic activity under ultraviolet and visible light irradiation. Under UV illumination, degradation kinetics were governed by band-gap excitation and reactive oxygen species generation, whereas a slower but reproducible reference behavior under visible light was predominantly associated with surface-related effects and dye sensitization rather than intrinsic visible-light absorption. Overall, the results establish this anatase-dominant TiO₂ as a reliable high-temperature reference photocatalyst, retaining measurable activity after calcination at 800 °C and exhibiting UV-driven behavior as the dominant contribution. Full article

Due to the indiscriminate use of antimicrobial drugs in the treatment of infectious diseases, human pathogenic bacteria have developed resistance to many commercially available antibiotics. Medicinal plants such as Convolvulus arvensis represent a renewable resource for the development of alternative therapeutic agents. This study aimed to evaluate the antibacterial activity of silver nanoparticles (AgNPs) biosynthesized from C. arvensis against two clinical antibiotic-resistant bacterial isolates. The pathogenic isolates were identified as Staphylococcus aureus MRSA and Escherichia coli ESBL using 16S rRNA gene sequencing. Silver nanoparticles were synthesized via a green synthesis approach, and their physicochemical properties were characterized using UV–Vis spectroscopy, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, zeta potential, and dynamic light scattering (DLS). The synthesized C. arvensis–AgNPs exhibited a surface plasmon resonance peak at 475 nm and predominantly spherical morphology with particle sizes ranging from 102.34 to 210.82 nm. FTIR analysis indicated the presence of O–H, C–O, C–N, C–H, and amide functional groups. The nanoparticles showed a zeta potential of −18.9 mV and an average hydrodynamic diameter of 63 nm. The antibacterial activity of the biosynthesized AgNPs was evaluated against methicillin-resistant S. aureus (MRSA and ATCC 29213) and E. coli (ESBL and ATCC 25922) using agar diffusion, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) assays. Inhibition zones ranged from 10 to 13 mm, with MIC and MBC values of 12.5–25 µg/mL and 25–50 µg/mL, respectively. In addition, the nanoparticles exhibited antioxidant activity (DPPH assay, IC₅₀ = 0.71 mg/mL) and anti-inflammatory effects as determined by protein denaturation inhibition. No cytotoxic effects were observed in the MCF-7 cell line at the MIC level. These findings suggest that C. arvensis–AgNPs have potential as natural antimicrobial, antioxidant, and anti-inflammatory agents. Full article

N-Alkyl deoxynojirimycin-derived drugs, belonging to the class of iminosugars, are well-known for their α-glucosidase inhibitory activity. N-Butyl-deoxynojirimycin (N-butyl-DNJ; NB-DNJ; also known as miglustat or UV-1) has been developed for the treatment of type 1 Gaucher disease and Niemann–Pick disease type C as Zavesca^®. Furthermore, it behaves as a host-targeted glucomimetic that inhibits endoplasmic reticulum α-glucosidase I and II (GluI and GluII, respectively) enzymes, resulting in improper glycosylation and misfolding of viral glycoproteins; thus, it is a potential antiviral agent. It is studied against a broad range of viruses in vitro and in vivo; however, its utility as antiviral has not been fully explored. Other N-alkylated congeners of DNJ are in preclinical and clinical studies for diverse viral infections. The iminosugar N-9′-methoxynonyl-1-deoxynojirimycin (MON-DNJ or UV-4) is probably the most studied and potent inhibitor of α-Glu I and α-Glu II in clinical trials. It is often studied in the form of its hydrochloride salt (UV-4B) and has broad-spectrum activity against diverse viruses, including dengue and influenza. In clinical trials, it was found to be safe at all doses tested up to 1000 mg. In this paper, an overview on N-alkyl derivatives of DNJ is reported, focusing on their antiviral activity. The literature search was carried out by means of three literature databases, i.e., PubMed/MEDLINE, Google Scholar, and Scopus, screened using different keywords. A brief history of the discovery of their usefulness as antivirals is given, as well as the most recent studies on new compounds belonging to this class. Since different names are often used for the same compound, we tried to dissipate confusion and bring some order to this jumble of names. Specifically, in the tables, all the diverse names used to identify each compound, were reported. Full article

The optical properties, electronic structure and morphology of thin films of the polymer donor PTB7-Th blended with either the fullerene acceptor PC70BM or the non-fullerene acceptor ZY-4Cl were systematically investigated to evaluate their annealing-induced evolution. Thin films were characterized using UV–Vis–NIR absorption spectroscopy, spectroscopic ellipsometry, ATR-FTIR spectroscopy, atomic force microscopy (AFM), and nano-IR analysis. In situ stepwise thermal annealing revealed distinct changes in absorption edge parameters, indicating thermally induced modifications in the electronic structure of the blend films. Ellipsometric analysis showed that elevated temperatures significantly affect the refractive index and extinction coefficient spectra. AFM measurements demonstrated markedly different surface morphology evolution for the two blend systems, with pronounced needle-shaped crystallites formation observed in PTB7-Th:ZY-4Cl films after annealing at 100 °C. Nano-IR characterization identified these crystallites as predominantly PTB7-Th, indicating phase separation driven by thermal treatment. The combined optical and structural results reveal distinct annealing-induced changes in the blend. Finally, BHJ solar cells, based on PTB7-Th:PC70BM and PTB7-Th:ZY-4Cl active layers, were fabricated, and their photovoltaic response was demonstrated. Full article

Research for sustainable viticulture practices has fostered interest in ultraviolet-C (UV-C) radiation as non-chemical tool for vineyard pathogen control; however, little information is available on their potential elicitation of berry metabolites. This two-year study investigated the impact of supplementary in-field UV-C applications, in addition to the vineyard sanitary protocols, on berry composition in Cabernet Sauvignon grapevines. In both experimental years, vegetative, yield, and berry technological parameters were determined at harvest, but they were not altered by UV-C treatments. Significantly higher concentrations of berry secondary metabolites were measured at harvest trough GC-MS and HPLC. UV-C treated vines had higher berry anthocyanins, particularly tri-hydroxylated forms (malvidin, delphinidin, petunidin), and flavonol concentrations (quercetin, myricetin derivatives), improving the potential for wine color stability and copigmentation. Glycosylated berry aroma compounds were also increased in UV-C vines, particularly some monoterpenes (geraniol, nerol, citronellol), C₁₃-norisoprenoids (β-damascenone, β-ionone, 3-oxo-α-ionol), and volatile phenols (eugenol, 4-vinyl-guaiacol). These results highlighted the potential of UV-C in-field applications, in addition to pest management control, to increase grape quality traits by modulating berry phenolic and aroma profile without affecting productivity. Full article

Topaz is one of the most economically important fluorine-rich nesosilicates, which are predominantly colorless in natural crystals. Hence, the trade relies almost entirely on irradiated blue topaz with an unstable color center, which has been shown to fade over time. The cobalt (Co) diffusion treatment is a stable alternative process for converting colorless topaz to blue by a solid-state diffusion mechanism. To investigate the potential role of Co²⁺ substitution in the formation of the blue layer and the coupled behavior of F/OH dehydroxylation in facilitating this process, systematic diffusion treatments have been successfully conducted and compared. In this study, gem-quality topazes were annealed in air at 1000 °C for 20–40 h (hr) along with CoO, Fe₂O₃, Cr₂O₃, and CuO powders. The diffused products were characterized using Scanning Electron Microscope (SEM), Ultraviolet-Visible absorption spectroscopy (UV-Vis), Near-Mid Infrared spectroscopy (NMIR), and X-ray photoelectron spectroscopy (XPS). Parallel runs with CuO, Fe₂O₃, or Cr₂O₃ alone confirmed that none of these oxides produces a stable blue layer, underscoring the unique role of Co. The Co-diffused sample displays an intense blue layer characterized by a Co²⁺ octahedral isomorphism triplet at 540, 580, and 630 nm, which are absent from both untreated and heat-only controls. XPS analysis reveals the emergence of Co²⁺ (binding energy: 780.63 eV) and a concomitant depletion in F⁻, along with the disappearance of the OH overtone absorption at 7123 cm⁻¹. These observations confirm that defluorination generates octahedral vacancies accommodated by the coupled substitution: CoF₂ (solid reactant) + (AlO₂)⁻ (fragment of topaz structure) → AlOF (solid product) + (CoOF)⁻ (fragment of topaz structure). Prolonged annealing leads to decreased relative atomic percentages of K⁺ and F⁻ ions, consistent with volatilization losses during the high-temperature process, thereby directly correlating color intensity with cobalt valence state, which transfers from Co²⁺ to Co³⁺. These findings establish a Co-incorporation chronometer for F–rich aluminosilicate systems, with an optimal annealing time of approximately 20 hr at 1000 °C. Furthermore, the above results demonstrate that the color mechanism in nesosilicate gems is simultaneously governed by volatile release and cation availability. Full article

To investigate the treatment performance of a CuTiO₃ photocatalytic system for organic peroxide production wastewater under visible light, CuTiO₃ powder prepared through the hydrothermal method was used for this experiment. The light absorption properties of the CuTiO₃ catalyst were analyzed using Uv-Vis diffuse reflectance spectroscopy (Uv-Vis DRS). The effects of the initial pH, photocatalyst dosage, light intensity, and reaction duration on the photocatalytic reaction were examined. Before and after the reaction, the changes in pollutant components in water were characterized via three-dimensional excitation–emission matrix fluorescence spectrometry (3D-EEM) and gas chromatography–mass spectrometry (GC-MS); the changes in the concentrations of some pollutants were analyzed via wavelength scanning. The results indicated that CuTiO₃ has a good response to visible light. Under the optimized conditions (initial pH = 5, CuTiO₃ dosage = 1.2 g/L, light intensity = 1300 W/m², duration = 4 h), the COD removal rate reached 58%, and the B/C (BOD₅/COD) ratio of wastewater increased from 0.112 to 0.221, demonstrating a good pretreatment effect. GC-MS analysis demonstrated significant degradation effects on amide and hydride substances. Radical capture experiments verified hydroxyl radicals as the dominant species in CuTiO₃ photocatalysis. Visible-light photocatalysis using CuTiO₃ provides an efficient pretreatment pathway for organic peroxide production wastewater. Full article

Listeria monocytogenes biofilms on surfaces that come into contact with food create ongoing challenges in produce-processing environments, highlighting the necessity for effective surface sanitation. This research examined the effectiveness of chlorine (200 ppm), quaternary ammonium compound (QAC, 400 ppm), and UV-C light (0.85 J/cm²) against L. monocytogenes biofilms developed on stainless steel, polyethylene terephthalate (PET), and silicone rubber materials frequently used in apple packing settings. Biofilms were cultivated using a mixture of LCDC and V7 strains in diluted apple juice and evaluated after 1 and 7 days of growth. The type of surface material and the age of the biofilm had a significant impact on the performance of the sanitizing agents (p < 0.05). Chlorine achieved a reduction of 2.84 ± 0.06 log CFU/coupon on 1-day-old biofilms on stainless steel, although its effectiveness dropped to 1.90 ± 0.07 log CFU/coupon on biofilms aged 7 days. Similar trends were noted for QAC (2.42 ± 0.05 to 1.73 ± 0.06 log CFU/coupon) and UV-C (2.71 ± 0.05 to 1.57 ± 0.08 log CFU/coupon) over time. PET and silicone rubber consistently exhibited lower log reductions than stainless steel for all treatments. The presence of organic matter from apple juice reduced the efficacy of sanitizers on all surfaces. These results emphasize the significant role of surface material, biofilm age, and organic load on sanitation effectiveness, offering practical recommendations for enhancing the control of L. monocytogenes in produce-processing facilities. Full article

Transparent conductive oxides (TCOs), such as indium tin oxide (ITO), are essential for flexible electronics; however, conventional vacuum-based deposition is costly and thermally aggressive for polymers. This study investigated the surface functionalization of PET substrates with ITO thin film-based forced hydrolysis as a low-cost, reproducible alternative. $\mathrm{S}\mathrm{n}{\mathrm{O}}_2$ nanoparticles were synthesized by forced hydrolysis at 180 °C for 3 h and 6 h, yielding crystalline nanoparticles with a cassiterite phase and an average crystallite size of 20.34 nm. The process showed high reproducibility, enabling consistent structural properties without complex equipment or high-temperature treatments. The $\mathrm{S}\mathrm{n}{\mathrm{O}}_2$ sample obtained at 3 h was incorporated into commercial ${\mathrm{I}\mathrm{n}}_2{\mathrm{O}}_3$ to form a mixed In–Sn–O oxide, which was subsequently deposited onto PET substrates by spin coating onto UV-activated PET. The resulting 1.1 µm ITO films demonstrated good adhesion (4B according to ASTM D3359), a low resistivity of 1.27 × 10⁻⁶ Ω·m, and an average optical transmittance of 80% in the visible range. Although their resistivity is higher than vacuum-processed films, this route provides a superior balance of mechanical robustness, featuring a hardness of (H) of 3.8 GPa and an elastic modulus (E) of 110 GPa. These results highlight forced hydrolysis as a reproducible route for producing ITO/PET thin films. The thickness was strategically optimized to act as a structural buffer, preventing crack propagation during bending. Forced hydrolysis-driven PET sheet functionalization is an effective route for producing durable ITO/PET electrodes that are suitable for flexible sensors and solar cells. Full article

Type 2 diabetes mellitus (T2DM) can be traditionally treated by edible and medicinal species rich in flavonoids and triterpenoids known for their metabolic benefits. Cucumis prophetarum L. has shown antioxidant and antidiabetic properties in decoction extracts. Since solvent polarity strongly influences the extraction of secondary metabolites, this study investigated the hydroalcoholic extracts of C. prophetarum L. to explore their chemical composition and insulin-sensitizing potential. Hydroalcoholic extracts from the leaf, stem, and root of C. prophetarum L. were analyzed by UV-Vis spectroscopy, ATR-FTIR, and UHPLC-ESI-QqTOF–MS/MS to profile their secondary metabolites. The insulin-sensitizing potential of each extract was assessed using an in vitro model of palmitic-acid-induced insulin resistance in L6 skeletal muscle cells, followed by Western blot analysis of key insulin-signaling proteins. Flavonoid glycosides such as apigenin-C,O-dihexoside, apigenin-malonylhexoside, and luteolin-C,O-dihexoside were abundant in leaf and stem extracts, while cucurbitacins predominated in the root. MTT assay confirmed that hydroalcoholic stem and root extracts of C. prophetarum L. were non-cytotoxic to L6 myotubes, whereas the leaf extract reduced viability only at higher concentrations. Oil Red O staining revealed a pronounced decrease in lipid accumulation following stem and root extract treatment. Consistently, the stem extract enhanced insulin signaling through the activation of the IRS-1/PI3K/Akt pathway, while the root extract primarily modulated the AMPK–mTOR pathway. Importantly, both extracts promoted GLUT4 translocation to the plasma membrane, highlighting their complementary mechanisms in restoring insulin sensitivity. Hydroalcoholic extracts of C. prophetarum L. alleviate insulin resistance through multiple molecular mechanisms, with bioactivity and composition differing markedly from previously reported in the decoctions, which highlight a promising source of insulin-sensitizing phytochemicals and underscore the importance of solvent selection in maximizing therapeutic potential. Full article