Search Results (8,799)

Welded joints are widely recognized as the most critical point in structures made of armour steels due to pronounced thermal effects, microstructural heterogeneity, and the degradation of mechanical and fatigue properties. This study investigates the mechanical properties and fatigue crack growth resistance of a welded joint produced on SA 500 armour steel, with the aim of preserving the properties of the base material as much as possible. To achieve this, a welding procedure incorporating a high-strength filler wire and optimized welding parameters was applied. Hardness and tensile testing was conducted to evaluate the extent of property degradation caused by welding. The results demonstrate that the applied welding process effectively limited the reduction in hardness and tensile strength, achieving values reasonably close to those of the base material. In addition, fatigue crack growth behaviour was investigated in accordance with ASTM E647, using both the Paris law and the McEvily law. The obtained fatigue crack growth curves and threshold stress intensity factor (ΔK_th) values indicate the nearly identical fatigue behaviour of the base material and the heat-affected zone, confirming the successful preservation of base material fatigue behaviour in the thermally affected zone. Moreover, the weld metal exhibited superior resistance to fatigue crack initiation and growth. Overall, the results confirm that the proposed welding approach provides favourable mechanical and fatigue performance for welded joints in armour steel applications. Full article

Internet Gaming Disorder (IGD) has emerged as an increasingly prevalent behavioral health concern among late adolescent university students, a vulnerable population with emotional distress due to the developmental changes and academic pressures. This research explored the direct correlations between IGD and Mental Health Disorder (MHD), such as depression, anxiety, and stress in Saudi Arabia (SA) with study discipline as a moderator. A total of 480 students participated in the developed self-structured questionnaire, and Partial Least Squares Structural Equation Modeling (PLS-SEM) was employed to analyze the obtained data. The results showed that IGD can exert a positive and significant association with all three aspects of MHD. Moreover, the PLS-SEM slope analysis indicated that study discipline can significantly moderate the link from IGD to both anxiety and depression, with university students in health, science, and engineering fields displaying higher symptoms of depression and anxiety as compared to their peers in humanities and social sciences. However, study discipline failed to moderate the link from IGD to stress. These findings can be interpreted through maladaptive coping mechanisms and behavioral addiction, whereby extreme IG can contribute to social withdrawal, reduce sleep quality, and worsen stress regulation, specifically during the late adolescence period. The results extend current research on IGD by emphasizing the disciplinary differences in mental health vulnerability and offering more empirical evidence from a Middle Eastern context. The study highlighted the urgent need for discipline-oriented mental health screening and targeted proactive interventions to deal with unsettled IG attitude within a higher education context. Full article

Reliable determination of radon adsorption properties in candidate adsorbents is essential for developing highly sensitive methods capable of measuring low ²²²Rn activity concentrations in air. Such measurements are increasingly important in environmental monitoring, climate research, and low-background experiments. Conventional approaches for determining the adsorption coefficient and heat of adsorption are labor- and time-intensive, limiting their suitability for comparative studies under identical conditions. Here, a recently proposed method is applied for the first time in a systematic comparative study. The approach couples solid-state nuclear track detectors (SSNTDs) with adsorbents that simultaneously act as radon collectors and alpha emitters, enabling fully parallel exposure and signal acquisition across multiple samples. Eight adsorbents—three activated carbon fabrics, two bulk activated carbons, and three synthetic zeolites—were evaluated simultaneously over a temperature range of 0–46.5 °C. Activated carbon fabrics exhibited the highest adsorption coefficients, with ACC-5092-10 reaching 11.8 ± 1.3 m³/kg at 20 °C. The heats of adsorption ranged from 24.8 ± 3.9 to 33.3 ± 5.0 kJ/mol, consistent with the literature values. For synthetic zeolites, the adsorption coefficient increased linearly with the Si:Al ratio. The influence of water content was further investigated for the five best-performing materials. The most hydrophobic material, zeolite SA-25 (Si:Al = 25), showed only a 25% reduction in adsorption coefficient under saturated humidity, whereas activated carbons exhibited strong suppression. These results demonstrate the practicality, sensitivity, and efficiency of the SSNTD–adsorbent method for comparative radon adsorption studies. Full article

This study investigates how key milling parameters influence both cutting noise and surface quality during the machining of laminated bamboo lumber. Using a multifactorial optimal response surface methodology, the effects of fibre orientation (0–135°), spindle speed (7000–10,000 r/min), feed rate (0.5–2.0 m/min) and milling depth (0.5–2.0 mm) were quantified through 25 experimental runs. Cutting noise, measured as peak sound pressure level (SPL), ranged from 86.8 to 95.2 dB, increasing markedly with fibre angle, feed rate, and milling depth, but exhibiting a non-linear response to spindle speed. Surface roughness (S_a) varied from 2.6 to 11.7 µm and was most strongly governed by milling depth, followed by fibre orientation and feed rate, with a significant interaction between fibre orientation and spindle speed. Quadratic regression models demonstrated strong predictive performance (R² = 0.97 for SPL; R² = 0.85 for S_a). Based on the response surfaces, optimal low-noise, high-quality machining was achieved at moderate spindle speeds, low feed rates, and shallow milling depths. These findings provide a mechanistic basis for understanding noise–roughness coupling in bamboo machining and offer practical guidance for computer numerical control processing, tool selection, and industrial noise reduction strategies in bamboo manufacturing. Full article

This work establishes a map between deposition, structure, and properties that enables the design of Ni-P coatings for advanced surface engineering applications. The coatings were electrodeposited on 316L stainless steel substrates using electrolytes of different phosphorus contents, achieved by systematically varying the phosphorous acid (H₃PO₃) concentrations. The influence of phosphorus content and intrinsic pH on elemental composition, cathodic current efficiency (CCE), thickness, microstructure, surface topography, crystalline structure, optical properties, and tribological behavior was investigated. The incorporation of phosphorus follows the H₃PO₃ concentration increase in a non-linear trend, achieving a maximum value of 22.17 at.% P at the highest bath concentration. The CCE presented an opposite trend, decreasing from approximately 96% to 40%, due to intense activity of hydrogen evolution reactions, and evidencing indirect phosphorus incorporation mechanisms. A transition from crystalline to amorphous structures was observed as the phosphorus content increased, being accompanied by grain refinement and significant roughness reduction to a minimum Sa = 8 ± 1 nm at ~15 at.% P. The optical properties, such as diffuse reflectivity and CIE Lab* color coordinates, were strongly correlated to surface roughness and microstructural evolution, demonstrating the influence of phosphorus through structural changes. Tribological behavior of the coatings revealed a complex interplay between composition, roughness, and wear mechanisms. The lower and more stable coefficients of friction were observed for high phosphorus coatings, although their durability depended on the balance between brittleness and grain refinement. The results demonstrate the combined role of phosphorus concentration and intrinsic pH changes as an effective tool for tailoring the structural, optical, and tribological properties of electrodeposited Ni-P coatings. Full article

Traditional satellite-derived bathymetry (SDB) often suffers from systematic optical path distortions due to the neglect of seafloor slope effects, leading to significant accuracy degradation in high-gradient coastal areas. This study proposes a Slope-Aware Physics-Informed Neural Network (SA-PINN) framework that synergistically utilizes ICESat-2 bathymetric photons and Sentinel-2 multispectral imagery. The core innovation involves a slope-aware operator, integrated into the radiative transfer-based physics loss function, which explicitly rectifies directional optical path deviations induced by seafloor inclination. By fusing physical mechanisms with data-driven features, the model utilizes a seven-dimensional feature space comprising four spectral bands, two directional slope components, and prior depth. Applications at Culebra, Maui, and Molokai demonstrate that SA-PINN significantly outperforms the Stumpf model, Random Forest, and standard CNNs, achieving root mean square errors (RMSE) of 1.36 m, 2.91 m, and 1.34 m, respectively. Ablation studies confirm that SA-PINN reduces RMSE by up to 37% compared to CNN in complex regions with slopes exceeding 10°, ensuring superior physical consistency and spatial continuity. This research provides a robust, in situ-free automated solution for high-resolution bathymetric mapping in remote and steep coastal environments globally. Full article

Arsenopyrite (FeAsS) is an important sulfide that holds gold in orogenic systems. Its arsenic content is often used as a proxy for gold fertility. However, arsenopyrite from the Um Rus gold deposit in Egypt’s Central Eastern Desert shows a complicated gold distribution that makes simple Au-As correlations hard to make. Integrated electron microprobe analysis (EMPA), laser ablation ICP-MS, and principal component analysis (PCA) reveal three unique textural and geochemical domains. Fine-grained arsenopyrite inclusions within pyrite aggregates (28–31 at% As) are devoid of detectable gold; PCA elucidates 84% of their variance through Fe–S versus Co-As substitution (PC1: 61.8%) and Pb-decoupled variability (PC2: 22.2%), suggesting crystallization from a Co-rich, Au-poor fluid. On the other hand, coarse oscillatory-zoned arsenopyrite can hold up to 6154 ppm of invisible gold. This is because of a moderate Au-As substitution (R = 0.41063, p = 0.08074) that was overprinted by a separate Au-Ag-Sb-Te hydrothermal pulse (Au–Ag: R = 0.97762; Au–Sb: R = 0.97608). PCA finds four parts (72.8% variance): Ag-Cu-As associations (PC1: 25.1%), Te versus Bi-Au signatures (PC2: 17.8%), Fe–S stoichiometry (PC3: 17.1%), and an Au versus Pb-decoupled event (PC4: 12.9%). This shows that minerals formed in more than one stage. Irregular As-rich overgrowths, containing ≤950 ppm gold and lacking significant Au–As correlation (R = −0.14011, p = 0.56726), show PCA (74.3% variance) that highlights S-As contrasts (PC1: 25.2%), Co-Ni enrichment (PC2: 18.8%), Cu-Fe-Ni associations (PC3: 16.2%), and a late Au-decoupled event (PC4: 14.2%), indicating barren recrystallization. These results show that just adding arsenic is not a good way to tell if gold is fertile. The highest amounts of invisible gold, on the other hand, are found in oscillatory-zoned domains with Ag-Sb-Te signatures. This research highlights the importance of combining PCA, geochemistry, and microtextures to differentiate auriferous from barren arsenopyrite, thereby enhancing exploration methodologies for structurally intricate orogenic gold systems. Full article

Corneal defects are a major cause of vision loss and require rapid, biocompatible, and effective sealing methods to restore ocular integrity and prevent infection. Current clinical adhesives, such as cyanoacrylate and fibrin glue, are limited by problems such as poor biocompatibility and inadequate stability. This study presents the design and evaluation of a fast-curable polymer bioadhesive hydrogel, a corneal glue formulated for efficient sealing of corneal defects. Hydrogels were synthesized from natural and synthetic polymers, including polyvinyl alcohol (PVA), sodium alginate (SA), and carboxymethyl cellulose (CMC), optimized for rapid gelation (~45 s), robust adhesion (~15 kPa), and mechanical strength (tensile strength ~0.35 MPa and storage modulus G′ indicating strong elastic behavior). Physicochemical and rheological properties, including swelling behavior and optical transparency (>90% transmittance across 400–700 nm), were characterized, including gelation time, swelling behavior, and mechanical strength. In vitro biocompatibility was assessed using human corneal epithelial cells to evaluate cytotoxicity and cell adhesion. Ex vivo studies on human cadaveric corneas with full-thickness defects measured adhesive strength and sealing efficacy through burst pressure (~38 mmHg) and leakage tests, with comparisons to commercial fibrin and cyanoacrylate adhesives. The optimized corneal glue exhibited fast curing, robust adhesion, high water retention with minimal swelling, favorable viscoelastic properties, and excellent cytocompatibility effectively sealing corneal defects in ex vivo models. These results highlight its potential as a promising fast-curable bioadhesive for corneal wound repair and ocular surface restoration. Full article

Background: Sexual Assault Care Centres (SACCs) in Belgium provide integrated medical and psychological care, a forensic examination and the option to report to the police to victims of sexual assault (SA). Understanding victims’ acceptability of these services is essential for improving SACC’s effectiveness and informing policy. Methods: In-depth interviews were conducted with 19 victims and 14 support persons to explore victims’ experiences with SACCs. The victims represented diverse characteristics (gender, age, SACC site and police reporting status). Data were analysed using thematic framework analysis, guided by Sekhon’s “Theoretical Framework of Acceptability”. Results: Participants viewed SACCs as a highly acceptable integrated model of specialised care for victims of recent SA. They expressed strong appreciation for the care provided at the SACC and its set-up (affective attitude), and they identified key professional qualities of SACC professionals (ethicality). Participants demonstrated good understanding of the functioning of the SACCs (intervention coherence). The model was perceived as effective in providing medical care, mental health support, and facilitating police reporting, though gaps were noted in linking victims with other actors in the criminal justice system (perceived effectiveness). Organisational strengths included the holistic, long-term, proactive, affordable and accessible nature of the care offered (perceived effectiveness, burden and opportunity cost). Victims faced challenges in linking to, engaging with and remaining in care due to distress post-SA, with support persons playing a crucial role in helping them navigate these challenges (self-efficacy). Conclusions: The study highlights the acceptability of an integrated, multidisciplinary approach to specialised SA care. Key elements include embedded psychological support, the option for forensic examination without mandatory reporting, and the possibility of police reporting at the SACC. These findings may inform the development of specialised SA services in other settings. Full article

Miscanthus lutarioriparius exhibits strong potential for cadmium (Cd) accumulation, making it a promising candidate for the phytoremediation of Cd-contaminated soils. However, its full remediation potential remains underexploited, highlighting the need for targeted genetic improvement This study presents a comprehensive genome-wide identification and systematic characterization of 20 Ml4CL (4-coumarate: CoA ligase genes) in the M. lutarioriparius. Results indicate that the Ml4CL gene family has undergone substantial evolutionary divergence and expansion. Phylogenetic classification is highly consistent with gene structures ad conserved motifs suggesting potential functional diversification. Promoter analysis revealed a complex cis-regulatory landscape enriched in n ABA- and light-responsive elements, frequently co-occuring with hormone-responsive elements associated with jasmonic acid (JA), gibberellins (GAs), salicylic acid (SA), and strigolactones (SLs) signaling. This pattern suggests that the Ml4CL family may function as an integrative regulatory node linking multiple stress and hormonal signaling pathways. Importantly, under Cd stress, Ml4CL genes exhibited diverse expression dynamics, including gene-specific repression and dose-dependent biphasic responses. Notably, Ml4CL4 showed strong repression, while other members displayed “induction-then-repression” or “repression-then-induction” patterns, suggesting a staged or hierarichical transcriptional response. These findings further suggest that Cd-responsive signaling networks may involve non-linear or threshold-dependent mechanismsthat activate distinct transcriptional programs depending on stress levels. Collectively, this study highlights the regulatory role of the Ml4CL family in plant adaptation to complex environments and identifies candidate dose-resonsive regulatory elements and key allelic variations. These findings provide valuable targets for molecular breeding and synthetic biology aimed at improving crop stress resilience. Full article

Sepsis-associated acute kidney injury (SA-AKI) remains a major diagnostic challenge in critically ill patients, as conventional functional criteria—serum creatinine and urine output—often detect AKI after clinically relevant pathophysiological derangement has already evolved. Increasing evidence suggests that SA-AKI reflects a heterogeneous process characterized by early cellular stress, microcirculatory dysfunction, inflammation-associated injury, and maladaptive repair preceding overt functional decline. In this context, biomarker-based approaches have been investigated to improve early risk stratification, phenotypic characterization, and prognostic assessment in septic patients. This narrative review synthesizes current evidence on established and emerging biomarkers relevant to SA-AKI, encompassing stress markers ([TIMP-2]•[IGFBP7]), tubular injury markers (e.g., NGAL, KIM-1, IL-18), functional markers (e.g., proenkephalin/penKid, cystatin C), and exploratory molecular signatures such as circulating microRNAs (miRNAs). We examine their temporal dynamics, performance estimates, and context-dependent applicability in sepsis, and discuss limitations related to heterogeneity, assay variability, and threshold standardization. Particular attention is given to multimodal and longitudinal strategies integrating biomarkers with KDIGO criteria and clinical phenotyping. Finally, we outline a stratified framework for biomarker interpretation in SA-AKI anchored to pathophysiological windows and clinical decision points. While available evidence supports the potential of selected biomarkers for short-term risk stratification and trajectory assessment, implementation requires prospective validation demonstrating incremental value beyond established models and measurable impact on patient-centered outcomes. Full article

Plasmopara viticola (Pv), the causal agent of downy mildew, is one of the most damaging pathogens affecting grapevine. Current control strategies largely depend on copper-based fungicides and synthetic chemicals, raising increasing concerns related to environmental sustainability and pathogen resistance. This study evaluated the efficacy of a novel Saccharomyces cerevisiae extract (U) as an inducer of resistance in the grapevine–Pv interaction. Microscopic observations revealed the ability of U to inhibit Pv spread over the leaf. Additionally, biochemical and molecular responses were analyzed in grapevine leaves subjected to four treatments: plants treated only with water (U⁻/Pv⁻; i.e., control) or U (U⁺/Pv⁻), inoculated with Pv (U⁻/Pv⁺), or both treated with U and then inoculated with Pv (U⁺/Pv⁺). Fully expanded leaves were sampled at 2-, 5-, 24-, and 72-h post inoculation (hpi). In U⁺/Pv⁻ leaves, jasmonic, salicylic and abscisic acid (JA, SA, and ABA), as well as hydrogen peroxide (H₂O₂) increased at 2 hpi (+44, +33, +38%, and 3-fold, respectively), accompanied by upregulation of pr1 (2-fold higher than control, respectively), suggesting the capacity of U to trigger the plant alert system. In U⁻/Pv⁺ leaves, peaks of JA and H₂O₂ occurred at 24 hpi (+40% and 4-fold higher than control), followed by marked ethylene emissions and upregulation of pr1 and pr2 (i.e., genes associated with Pv defense; around 2-fold, averagely) at 72 hpi, confirming the progression of infection. In contrast, U⁺/Pv⁺ leaves showed stronger peaks of H₂O₂ at both 2 and 5 hpi (7-fold and +58%, respectively), together with SA accumulation and upregulation of pr1, pr2, eds1, and chit1b at 72 hpi (more than 2-fold), suggesting a priming effect of U. Overall, U effectively enhanced grapevine defense responses and limited Pv development, highlighting its potential as a sustainable disease management strategy. Full article

Ti-6Al-4V parts fabricated via selective laser melting (SLM) often exhibit severe surface irregularities that limit their direct engineering application. This study proposes a top-hat beam laser polishing method to improve surface quality. The results show that surface roughness (Sa) is reduced to 0.48 μm, a 95.3% decrease from the as-built condition. The uniform energy distribution of the top-hat beam stabilizes melt pool behavior, enabling effective surface leveling through valley filling and lateral melt flow. In contrast, Gaussian beam polishing induces strong Marangoni convection and wake effects, resulting in higher residual roughness. Microstructural analysis indicates an increased fraction of equiaxed α grains and a β-phase content of ~6% after top-hat polishing. The heat-affected zone likely exhibits a subcritical heat-treatment-like effect, promoting fine secondary α precipitation. Additionally, localized stresses induced by steep thermal gradients during SLM are effectively relieved. Overall, top-hat laser polishing is a promising post-processing technique for enhancing the surface quality of Ti-6Al-4V components. Full article

In this study, chicken bone biochar (CBC) was prepared from waste chicken bones via oxygen-limited pyrolysis. A magnetic component (Fe₃O₄) was introduced, and the composite was embedded in a sodium alginate (SA) gel network, successfully constructing magnetic chicken bone biochar/sodium alginate composite gel beads (M-CBC/SA). The experimental results showed that under the conditions of pH = 4.5, 25 °C, and an adsorbent dosage of 0.5 g/L, the removal efficiency of M-CBC/SA toward 50 mg/L U(VI) reached 91.67%, corresponding to an adsorption capacity of 91.67 mg/g. The adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model, with a theoretical maximum adsorption capacity of 322.58 mg/g, indicating that the adsorption was dominated by monolayer chemisorption. The material exhibited excellent magnetic separability and good anti-interference ability against coexisting ions such as K⁺, Na⁺, Cl⁻, and SO₄²⁻, and its adsorption behavior was only weakly affected by ionic strength. Characterization by XRD, FTIR, XPS, SEM-EDS and other techniques revealed that the immobilization mechanism of U(VI) involved the synergistic effects of dissolution–precipitation (the formation of a new autunite phase), surface complexation (involving hydroxyl and phosphate groups), ion exchange (exchange with Ca²⁺), and electrostatic attraction. Using waste chicken bones as the raw material, this composite achieves both efficient uranium immobilization and convenient magnetic separation, fully embodying the environmental concept of “treating waste with waste”, and shows promising application prospects in the treatment of uranium-containing wastewater. Full article

Licania tomentosa leaf extract was used to synthesize zinc oxide nanoparticles (ZnO NPs) which were systematically analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-Visible (UV-Vis) and Fourier transform infrared (FT-IR) spectroscopies and energy-dispersion X-ray spectroscopy (EDS) methods. Based on XRD scans, the green NPs have an average crystallite size of 15.9 nm as estimated using the Scherrer equation and have a roughly spherical shape with an average diameter of 25.15 ± 1.2 nm as calculated from SEM data. As estimated from the Tauc plot based on UV-Vis absorption spectra, ZnO NPs have a small band gap of 3.0 eV. The biosynthesized ZnO NPs were effectively utilized for the photodegradation of methylene blue (MB) and crystal violet (CV) dyes under UV illumination with resulting MB and CV degradation efficiencies of ~94% and ~81% after 60 min and 70 min, with pH = 12 and pH = 10, respectively. Different experimental parameters such as NPs quantity, experimental pH, light intensity and initial concentration of dyes were varied to test the performance of the catalyst. Furthermore, efficient recycling of the catalyst was demonstrated. We also undertook antimicrobial studies of the green ZnO NPs. The ZnO NPs demonstrated broad-spectrum antimicrobial efficacy against Escherichia coli ATCC 35218, Enterococcus faecalis ATCC 29737, Klebsiella pneumoniae ATCC 700603, Pseudomonas aeruginosa ATCC 27853, P. aeruginosa B3, Staphylococcus aureus ATCC 29213, and S. aureus SA01, with the minimum inhibitory concentration (MIC) and the inhibitory concentrations associated with 50% effect (IC50) values ranging from 250 to 2000 µg/mL and 7.74 to 283.14 µg/mL, respectively. The nanoparticles also significantly inhibited biofilm formation by E. faecalis ATCC 29737, P. aeruginosa ATCC 27856, and S. aureus SA03. The antimicrobial efficiency of the ZnO NPs against Escherichia coli ATCC 25922 and Staphylococcus aureus SA03 isolates was also assessed using the disk diffusion assays. Taken together, our results reveal that the biosynthesized ZnO NPs are promising multifunctional materials with potential applications in antimicrobial treatments, biofilm control, and photocatalytic remediation. Full article