Search Results (12)

Autonomous driving systems (ADSs) are reliable only when heterogeneous sensors, estimation algorithms, and safety mechanisms are engineered as a single coherent safety-critical measurement system rather than as loosely coupled modules. Production stacks integrate cameras, LiDAR, automotive radar, and GNSS/IMU, yet deployment remains constrained by modality-specific failure modes, calibration and synchronization drift, and out-of-distribution (OOD) conditions that violate modeling assumptions. These limitations induce overconfidence and downstream decision errors whenever planning assumes certainty sharper than sensing can justify. This survey introduces a sensor-centric framework linking measurement physics, uncertainty propagation, fusion integrity, safety assurance, and risk-aware planning and control. We formalize what each modality physically measures; unify probabilistic, evidential, and conformal uncertainty representations; analyze filtering, factor-graph, BEV, transformer, and state-space fusion architectures with an emphasis on robustness and graceful degradation; and generalize aviation-style integrity concepts (RAIM/ARAIM) to multi-modal autonomy. The distinctive contribution is a single sensor-to-assurance throughline in which every uncertainty representation is tied to its measurement physics, every fusion architecture is evaluated against an explicit integrity-monitoring requirement generalized from RAIM/ARAIM, and every safety-standard clause is mapped to a concrete architectural mechanism. We map these mechanisms onto ISO 26262, ISO 21448 (SOTIF), ISO/PAS 8800, ANSI/UL 4600, and the UNECE framework, and connect perception uncertainty to decision-making through chance-constrained MPC and formal safety filters (RSS, CBF). Industry case studies and emerging V2X and generative-simulation approaches close the loop to deployable safety arguments. Full article

The rapid progress of sensing technologies, artificial intelligence, and embedded computing has significantly accelerated the development of autonomous vehicles. Among the core challenges of higher-level driving automation, reliable environmental perception remains one of the most critical. This review presents a systematic PRISMA-based analysis of multimodal sensor technologies and fusion architectures applied in autonomous driving, based on 66 peer-reviewed studies published between 2014 and 2025. The study examines the operational characteristics, advantages, and limitations of major sensing modalities, including cameras, LiDAR, radar, ultrasonic sensors, and GNSS/IMU-based localization systems. Particular attention is given to multimodal fusion strategies, covering early, mid-level, high-level, and transformer-based architectures that combine complementary sensor information to improve perception robustness and decision reliability. The review further synthesizes current evidence on performance under adverse environmental conditions, benchmark validation practices, real-time computational constraints, and the growing role of functional safety frameworks such as ISO 26262 and SOTIF. Emerging research directions, including 4D radar, self-supervised long-range fusion, foundation models, and cooperative V2X perception, are also discussed. The findings indicate that multimodal sensor fusion is a highly effective architectural strategy for improving scalability, fail-operational robustness, and certifiable safety in autonomous driving systems, particularly in higher-level automation scenarios. Future research should focus on uncertainty-aware fusion, explainable cross-modal reasoning, large-scale real-world validation, and efficient hardware–software co-design to support robust Level 4–5 vehicle autonomy. Full article

Cooperative Connected and Automated Mobility (CCAM) is a critical paradigm for overcoming the limitations of single-vehicle intelligence and enabling coordinated intelligent transportation. To address the lack of systematic reviews towards recent CCAM advances, this paper presents a comprehensive review of relevant publications from the past five years. First, we establish a unified framework spanning communication, perception, decision-making, and control, and clarify the associated core components and technologies. Then, we identify three major bottlenecks that constrain large-scale CCAM deployment: uncertainty propagation along the perception-decision-control (PDC) chain, misalignment between functional safety and SOTIF standards, and inadequate end-to-end cybersecurity protection. In the context of 5G-A/6G, edge computing, and large-language-model-driven intelligence, we further propose targeted research directions. This survey aims to provide a systematic reference for theoretical investigation and engineering implementation. Full article

Ensuring the safety of autonomous driving systems (ADS) requires scenario-based testing that reflects the complexity and variability of real-world driving conditions. However, the nondeterministic nature of actual traffic environments makes physical testing costly and limited in scope, particularly for rare and safety-critical scenarios. To address this, simulation has become a core component in validation by providing scalable, controllable, and repeatable testing environments. This study proposes a trajectory-based scenario classification framework that emphasizes both generality and interpretability. Specifically, we define a set of rule-based maneuver classification criteria using lateral acceleration patterns and apply them to simulated urban driving scenarios modeled with OpenSCENARIO. To address overlapping maneuver characteristics, a priority ordering of classification rules is introduced to resolve ambiguities. The proposed method was evaluated on a dataset comprising 7 types of maneuvers, including straight driving, lane changes, turns, roundabouts, and U-turns. Experimental results demonstrate the effectiveness of rule-driven classification based on vehicle trajectory dynamics and highlight the potential of this approach for structured scenario definition and validation in ADS simulation environments. Full article

The lack of standardized functional safety information limits the adoption of electric vehicles (EVs) in Brazil. This study proposes a voluntary Brazilian safety labeling program for critical EV subsystems, based on ISO 26262:2018 (Functional Safety) and ISO 21448:2022 (Safety of the Intended Functionality, SOTIF), adapted to the Brazilian regulatory context. The framework integrates (i) comparative analysis of international vehicle labeling programs; (ii) hazard analysis and risk assessment (HARA) for four critical subsystems (battery management, electric powertrain, charging system, HV cables/connectors); and (iii) a document reliability index (DRI) that weights generic relative risk (RRI_gen) by the robustness of technical documentation (Evidence Score). The DRI calculation assumes statistical independence among subsystems as a simplification, to be validated in the pilot phase. Application to a simulated dataset of 100 BEV models yielded DRI scores ranging from 1.6 to 9.3 (mean = 5.0, SD = 1.8, CV = 36.7%). Vehicles were classified into five safety classes (1–5), with approximately 85% distributed across intermediate classes 2–4, demonstrating strong discriminatory power. Results are communicated via a physical label integrated into Brazil’s National Energy Conservation Label (ENCE), with QR codes linking to detailed subsystem data. The proposal can reduce consumer risk perceptions, stimulate industrial innovation in safety documentation, support regulatory harmonization with ISO standards, and advance electric mobility adoption in emerging markets. Full article

This paper evaluates Advanced Driver Assistance Systems (ADASs) in test scenarios derived from naturalistic driving and crash data, mapped to ISO 26262, ISO/PAS 21448 (SOTIF), and ISO 34502. From eight high-risk scenarios, it is validated for left turns across oncoming traffic on a proving ground using a Škoda Superb iV against a soft Global Vehicle Target. ODD and spatiotemporal thresholds are parameterized and speed/acceleration profiles from GNSS/IMU data are analyzed. AEB and FCW performance varies across nominally identical runs, driven by human-in-the-loop variability and target detectability. In successful interventions, peak deceleration reached −0.64 g, meeting UNECE R152 criteria; in other runs, late detection narrowed TTC below intervention thresholds, leading to contact. Limitations in current protocols are identified and argue for scenario catalogs with realistic context (weather, surface, masking) and latency-aware metrics. The results motivate extending validation beyond standard tracks toward mixed methods linking simulation, scenario databases, and instrumented field trials. Full article

At present Deep Neural Networks (DNN) have a dominant role in the AI-driven Autonomous driving approaches. This paper focuses on the potential safety risks of deploying DNN classifiers in Advanced Driver Assistance System (ADAS) systems. In our experience, many theoretically sound AI-driven solutions tested and deployed in ADAS have shown serious safety flaws in practice. A brief review of practice and theory of automotive safety standards and related body of knowledge is presented. It is followed by a comparative analysis between DNN classifiers and safety standards developed in the automotive industry. The output of the study provides advice and recommendations for filling the current gaps within the complex and interrelated factors pertaining to the safety of Autonomous Road Vehicles (ARV). This study may assist ARV’s safety, system, and technology providers during the design, development, and implementation life cycle. The contribution of this work is to highlight and link the learning rules enforced by risk factors when DNN classifiers are expected to provide a near real-time safer Vehicle Navigation Solution (VNS). Full article

System perception of the environment becomes more important as the level of automation increases, especially at the higher levels of automation (L3+) of Automated Driving Systems. As a consequence, scenario-based validation becomes more important in the overall validation process of a vehicle. Testing all scenarios with potential triggering conditions that may lead to hazardous vehicle behaviour is not a realistic approach, as the number of such scenarios tends to be unmanageable. Therefore, another approach has to be provided to deal with this problem. In this paper, we present our approach, which uses the injection of perception performance insufficiencies instead of directly testing the potential triggering conditions. Finally, a use case is described that illustrates the implementation of the proposed approach. Full article

The detection range and accuracy of light detection and ranging (LiDAR) systems are sensitive to variations in fog concentration, leading to the safety of the intended functionality-related (SOTIF-related) problems in the LiDAR-based fusion localization system (LMSFLS). However, due to the uncontrollable weather, it is almost impossible to quantitatively analyze the effects of fog on LMSFLS in a realistic environment. Therefore, in this study, we conduct a layered quantitative SOTIF analysis of the LMSFLS on foggy days using fog simulation. Based on the analysis results, we identify the component-level, system-level, and vehicle-level functional insufficiencies of the LMSFLS, the corresponding quantitative triggering conditions, and the potential SOTIF-related risks. To address the SOTIF-related risks, we propose a functional modification strategy that incorporates visibility recognition and a 3σ-criterion-based variance mismatch degree grading adaptive extended Kalman filter. The visibility of a scenario is recognized to judge whether the measurement information of the LiDAR odometry is disturbed by fog. Moreover, the proposed filter is adopted to fuse the abnormal measurement information of the LiDAR odometry with IMU and GNSS. Simulation results demonstrate that the proposed strategy can inhibit the divergence of the LMSFLS, improve the SOTIF of self-driving cars on foggy days, and accurately recognize the visibility of the scenarios. Full article

The automobile industry has developed dramatically in recent years, the supply of vehicles has also increased, and thus it has become deeply established in everyday life. Recently, as the supply of vehicles with autonomous driving functions increases, the safety of vehicles is also an emerging issue. Various car-following models for the safe driving of vehicles have long been studied by various people, and recently, a Responsibility-Sensitive Safety (RSS) model has been proposed by Mobileye. However, in existing car-following models or the RSS model, the safe distance between vehicles is presented using only vehicle speed and acceleration information, so there is a limitation in that it cannot respond to changes in road conditions due to the weather. In this paper, in order to ensure safety when the RSS model is applied to a variable focus function camera, an improved RSS model is presented in consideration of the changes in road conditions due to changes in weather, and a safety distance is derived based on the proposed model. Full article

Reasonably foreseeable misuse by persons, as a primary aspect of safety of the intended functionality (SOTIF), has a significant effect on cooperation performance for lane keeping. This paper presents a novel human–machine cooperative control scheme with consideration of SOTIF issues caused by driver error. It is challenging to balance lane keeping performance and driving freedom when driver error occurs. A safety evaluation strategy is proposed for safety supervision, containing assessments of driver error and lane departure risk caused by driver error. A dynamic evaluation model of driver error is designed based on a typical driver model in the loop to deal with the uncertainty and variability of driver behavior. Additionally, an extension model is established for determining the cooperation domain. Then, an authority allocation strategy is proposed to generate a dynamic shared authority and achieve an adequate balance between lane keeping performance and driving freedom. Finally, a model predictive control (MPC)-based controller is designed for calculating optimal steering angle, and a steer-by-wheel (SBW) system is employed as an actuator. Numerical simulation tests are conducted on driver error scenarios based on the CarSim and MATLAB/Simulink software platforms. The simulation results demonstrate the effectiveness of the proposed method. Full article

The Intelligent Railway Driving Assistance System (IRDAS) is a novel kind of onboard system that relies on its own situational awareness function to ensure the safety and efficiency of train driving. In such systems, the use of situational awareness brings about a new fault-free safety problem, i.e., the safety of the intended functionality (SOTIF). It is essential to analyze the SOTIF-related hazardous factors for ensuring a safe train operation. In this paper, a hazard analysis approach is proposed to capture and evaluate SOTIF-related hazardous factors of IRDAS. This approach consists of an extended STPA-based hazardous factor identification part and a complex network-based hazardous factor evaluation part. In the first part, an extended control structure of STPA is designed for the modeling of the situational awareness process, followed by a new classification of SOTIF-related causal scenarios to assist the identification of causal scenarios. In the second part, a modeling method for heterogeneous complex networks and some customized topological indexes are proposed to evaluate the hazardous factors identified in the STPA causal analysis. The outcomes of the approach can help develop targeted hazard control strategies. The proposed approach has been applied to a new IRDAS operating in Tsuen Wan Line of Hong Kong MTR. The result shows that the approach is effective for the analysis of hazardous factors and is helpful for the formulation of hazard control strategies. Full article