Search Results (402)

This study aimed to re-evaluate a historical war supply route within the context of cultural tourism, to revitalize its natural, historical, and cultural values, and to integrate it with existing hiking and trekking routes. Remote sensing (RS) and geographic information system (GIS) technologies were utilized, and land surveys were conducted to support the analysis and validate the existing data. Data for slope, one of the most critical factors for hiking route selection, were generated, and the optimal route between the starting and destination points was identified using least cost path analysis (LCPA). Historical, touristic, and recreational rest stops along the route were mapped with precise coordinates, and both the existing and the newly generated routes were assessed in terms of their accessibility to these points. Field validation was carried out based on the experiences of expert hikers. According to the results, the length of the existing hiking route was determined to be 15.72 km, while the newly developed trekking route measured 17.36 km. These two routes overlap for 7.75 km, with 9.78 km following separate paths in a round-trip scenario. It was concluded that the existing route is more suitable for hiking, whereas the newly developed route is better suited for trekking. Full article

As vital material carriers of human civilization, earthen sites are experiencing continuous surface deterioration under the combined effects of weathering and anthropogenic damage. Traditional surface conservation techniques, due to their poor compatibility and limited reversibility, struggle to address the compound challenges of micro-scale degradation and macro-scale deformation. With the deep integration of digital twin technology, spatial information technologies, intelligent systems, and sustainable concepts, earthen site surface conservation technologies are transitioning from single-point applications to multidimensional integration. However, challenges remain in terms of the insufficient systematization of technology integration and the absence of a comprehensive interdisciplinary theoretical framework. Based on the dual-core databases of Web of Science and Scopus, this study systematically reviews the technological evolution of surface conservation for earthen sites between 2000 and 2025. CiteSpace 6.2 R4 and VOSviewer 1.6 were used for bibliometric visualization analysis, which was innovatively combined with manual close reading of the key literature and GPT-assisted semantic mining (error rate < 5%) to efficiently identify core research themes and infer deeper trends. The results reveal the following: (1) technological evolution follows a three-stage trajectory—from early point-based monitoring technologies, such as remote sensing (RS) and the Global Positioning System (GPS), to spatial modeling technologies, such as light detection and ranging (LiDAR) and geographic information systems (GIS), and, finally, to today’s integrated intelligent monitoring systems based on multi-source fusion; (2) the key surface technology system comprises GIS-based spatial data management, high-precision modeling via LiDAR, 3D reconstruction using oblique photogrammetry, and building information modeling (BIM) for structural protection, while cutting-edge areas focus on digital twin (DT) and the Internet of Things (IoT) for intelligent monitoring, augmented reality (AR) for immersive visualization, and blockchain technologies for digital authentication; (3) future research is expected to integrate big data and cloud computing to enable multidimensional prediction of surface deterioration, while virtual reality (VR) will overcome spatial–temporal limitations and push conservation paradigms toward automation, intelligence, and sustainability. This study, grounded in the technological evolution of surface protection for earthen sites, constructs a triadic framework of “intelligent monitoring–technological integration–collaborative application,” revealing the integration needs between DT and VR for surface technologies. It provides methodological support for addressing current technical bottlenecks and lays the foundation for dynamic surface protection, solution optimization, and interdisciplinary collaboration. Full article

Agriculture faces a dual challenge in the context of climate change, serving as both a significant contributor to greenhouse gas (GHG) emissions and a sector highly vulnerable to its impacts. Addressing this requires a transition toward climate-resilient agriculture (CRA). Emerging technologies, including geospatial tools (e.g., Geographic Information Systems (GISs) and remote sensing (RS)), as well as artificial intelligence (AI), offer promising methods to support this transition. However, their individual capabilities, limitations, and appropriate applications are not always well understood or clearly delineated in the literature. A common issue is the frequent overlap between GISs and RS, with many studies assessing GIS contributions while concurrently employing RS techniques, without explicitly distinguishing between the two (or vice versa). In this sense, the objective of this review is to conduct a critical analysis of the existing state of the art in terms of the distinct roles, limitations, and complementarities of GISs, RS, and AI in advancing CRA, guided by an original definition we propose for CRA (structured around three key dimensions and their corresponding targets). Furthermore, this review introduces a synthesis matrix that integrates both the individual contributions and the synergistic potential of these technologies. This synergy-focused matrix offers not just a summary, but a practical decision support matrix that could be used by researchers, practitioners, and policymakers in selecting the most appropriate technological configuration for their objectives in CRA-related work. Such support is increasingly needed, especially considering that RS and AI have experienced exponential growth in the past five years, while GISs, despite being the more established “big brother” among these technologies, remain underutilized and is often insufficiently understood in agricultural applications. Full article

Malawi’s Blantyre City faces escalating waste management challenges due to increased urbanization and inadequate waste collection services. This research utilized remote sensing (RS) and geographic information system (GIS) techniques to map potential illegal dump sites (PIDSs). MODIS and Sentinel-5P satellite imagery and GPS locations of dumpsites were used to extract environmental and spatial variables, including land surface temperature (LST), the enhanced vegetation index (EVI), Formaldehyde (HCHO), and distances from highways, rivers, and official dumps. An analytical hierarchical process (AHP) pairwise comparison matrix was used to assign weights for the six-factor variables. Further, fuzzy logic was applied, and weighted overlay analysis was used to generate the PIDS map. The results indicated that 10.27% of the study area has a “very high” probability of illegal dumping, while only 2% exhibited a “very low” probability. Validation with field data showed that the GIS and RS were effective, as about 89% of the illegal dumping sites were identified. Zonal statistics identified rivers as the most significant contributor to PIDS identification. The findings of this study underscore the significance of mapping PIDS in low-resource regions like Blantyre, Malawi, where inadequate waste management and illegal dumping are prevalent. Future studies should consider additional factors and account for seasonal variations. Full article

Urban rail transit is a key enabler for optimizing urban spatial structures, and its interactive relationship with land use has long been a focus of attention. However, existing studies suffer from scattered methodologies, a lack of systematic analysis, and insufficient dynamic insights into global trends. This study comprehensively employs CiteSpace, VOSviewer, and Scimago Graphica to conduct bibliometric and knowledge map analysis on 1894 articles from the Web of Science database between 2004 and 2024, focusing on global research trends, collaboration networks, thematic evolution, and methodological advancements. Key findings include the following: (1) research on rail transit and land use has been steadily increasing, with a significant “US-China dual-core” distribution, where most studies are concentrated in the United States and China, with higher research density in Asia; (2) domestic and international research has primarily focused on themes such as the built environment, value capture, and public transportation, with a recent shift toward artificial intelligence and smart city technology applications; (3) research methods have evolved from foundational 3S technologies (GIS, GPS, RS) to spatial modeling tools (e.g., LUTI model, node-place model), and the current emergence of AI-driven analysis (e.g., machine learning, deep learning, digital twins). The study identifies three future research directions—technology integration, data governance, and institutional innovation—which provide guidance for the coordinated planning of transportation and land use in future smart city development. Full article

Groundwater serves as a vital resource for sustainable water supply, particularly in semi-arid regions where surface water availability is limited. This study explores groundwater potential zones in the East Desert, Qift–Qena, Egypt, using a multidisciplinary approach that integrates remote sensing (RS), geographic information systems (GIS), geostatistics, and field validation with water wells to develop a comprehensive groundwater potential mapping framework. Sentinel-2 imagery, ALOS PALSAR DEM, and SMAP datasets were utilized to derive critical thematic layers, including land use/land cover, vegetation indices, soil moisture, drainage density, slope, and elevation. The results of the groundwater potentiality map of the study area from RS reveal four distinct zones: low, moderate, high, and very high. The analysis indicates a notable spatial variability in groundwater potential, with “high” (34.1%) and “low” (33.8%) potential zones dominating the landscape, while “very high” potential areas (4.8%) are relatively scarce. The limited extent of “very high” potential zones, predominantly concentrated along the Nile River valley, underscores the river’s critical role as the primary source of groundwater recharge. Moderate potential zones include places where infiltration is possible but limited, such as gently sloping terrain or regions with slightly broken rock structures, and they account for 27.3%. These layers were combined with geostatistical analysis of data from 310 groundwater wells, which provided information on static water level (SWL) and total dissolved solids (TDS). GIS was employed to assign weights to the thematic layers based on their influence on groundwater recharge and facilitated the spatial integration and visualization of the results. Geostatistical interpolation methods ensured the reliable mapping of subsurface parameters. The assessment utilizing pre-existing well data revealed a significant concordance between the delineated potential zones and the actual availability of groundwater resources. The findings of this study could significantly improve groundwater management in semi-arid/arid zones, offering a strategic response to water scarcity challenges. Full article

The tasar silk production of India’s sericulture industry supports tribal livelihoods and economic sustainability. However, Antheraea mylitta Drury, 1773, the primary species for tasar silk, faces habitat threats due to deforestation, climate change, and anthropogenic pressures. This study evaluates the distribution and habitat suitability of wild tasar silkworm using multi-criteria approach, Geographic Information System (GIS), Remote Sensing (RS), and ecological niche modeling using the MaxEnt algorithm. Field surveys were conducted to collect cocoon samples, and the analysis of environmental parameters and assessment of soil micronutrient influences were also carried out. The MaxEnt model predictions indicate that the Central, Western, and Southern zones of Mayurbhanj, encompassing the Similipal Biosphere Reserve, provide the most suitable habitats. The jackknife test confirmed that these climatic variables collectively contributed 68.7% to the habitat suitability model. This study highlights the impact of habitat fragmentation and deforestation on tasar silkworm populations, emphasizing the need for conservation strategies, sustainable forest management, and afforestation programs. The findings highlight the following key conservation strategies: restoring habitats in Similipal, enforcing anti-deforestation laws, promoting community-led planting of host trees, and adopting climate-resilient silk farming to protect biodiversity and support tribal livelihoods. Full article

This study comprehensively assessed the effects of ten highland barley varieties on the quality and digestibility of noodles. The characteristics of highland barley flour, including proximate composition, pasting properties, and dough mixing behavior, were analyzed. The quality of the resulting noodles was evaluated through cooking and textural property analysis. The digestion characteristics of the noodles were determined to evaluate the starch hydrolysis rate and glycemic index (GI). Additionally, a correlation analysis was conducted among the proximate composition of highland barley flour, the characteristics of flour, and the quality of noodles. The results demonstrate that Chaiqing 1 exhibited superior performance in terms of flour quality and noodle texture compared to other varieties. The noodles produced from this variety possessed an outstanding texture, with moderate hardness and excellent elasticity. Additionally, its noodles also exhibited superior cooking resistance and low cooking loss. Nutritionally, the moderate estimated glycemic index (eGI) and high resistant starch (RS) content of Chaiqing 1 were beneficial for intestinal health. Ximalaya 22 showed good processing performance but slightly inferior texture, whereas Kunlun 14 had a high dietary fiber content, which resulted in noodles prone to breaking. Through a comprehensive variety comparison and screening, Chaiqing 1 emerged as the preferred choice for producing high-quality highland barley noodles. Furthermore, correlation analysis revealed that dietary fiber was significantly and positively correlated with water absorption, stability time (ST), and hardness (p < 0.01). Amylose content was associated with peak temperature and breakdown viscosity. This study provides valuable insights into the selection of highland barley varieties for noodle production. Full article

Local Climate Zone (LCZ) classification is essential for urban microclimate modeling and heat mitigation planning. Traditional methods relying on manual sampling face limitations in scalability, objectivity, and handling spatial heterogeneity. This study presents an automated framework for LCZ sample generation, facilitating efficient large-scale LCZ mapping and LCZ-based urban climate analysis and geospatial applications. To this aim, it proposes a dual-path automated framework integrating GIS-driven sample generation to enhance LCZ classification accuracy: a multi-parameter Synergistic Optimization approach for urban LCZs and a Distance-driven Maximum Coverage method for natural LCZs. Specifically, urban samples are selected via multi-objective optimization and Pareto front screening for quality and representativeness, while the selection of natural samples prioritizes spatial coverage and diversity. Combining urban morphological parameters with Sentinel-2 imagery and a Random Forest classifier yielded a final accuracy of 0.95 in our test site, confirming the framework’s effectiveness. Full article

Soil erosion is a significant environmental issue that threatens the stability of land and agricultural productivity. In Eritrea, erosion remains understudied, limiting effective land management. This study assesses soil erosion and maps erosion risk in the Mai Nefhi watershed using the Revised Universal Soil Loss Equation (RUSLE), integrated with Geographic Information System (GIS) and remote sensing (RS) data. Key parameters were analyzed, including rainfall erosivity (R), soil erodibility (K), slope length and steepness (LS), cover management (C), and conservation practice (P). A severity classification identified five risk levels: low (0–7), moderate (7–22), high (22–45), very high (45–90), and severe (90–250) t ha⁻¹ yr⁻¹ with an area coverage of 61.93%, 22.05%, 5.62%, 6.43%, and 3.94%, respectively. Among all the parameters, the LS factor was identified as the dominant driver of soil loss, with erosion rates increasing sharply on slopes above 30%. There was a weak inverse relationship between soil organic matter and erosion (R² = 0.279), indicating that only 27.9% of the variability in soil erosion rates can be explained by SOM content alone. This result further suggests other dominant factors like slope and land use. The findings underscore the need for slope-sensitive conservation strategies, including terracing, agroforestry, and restrictions on hillside cultivation. Full article

Intensifying global warming has disrupted natural ecosystems and altered energy consumption patterns. Understanding the impact of land use and cover change on surface urban heat islands (SUHIs) and energy use is critical for sustainable development. In this study, normalized difference vegetation index (NDVI), modified normalized difference water index (MNDWI), normalized difference built-up index (NDBI), and SUHI data were derived using GIS and remote sensing (RS) technology, and quantitative analysis was performed in combination with energy consumption data. The results revealed the following key findings. In summer, the NDVI exhibited a significant negative correlation with total urban building energy consumption (r = −0.52), whereas the NDBI and SUHI showed significant positive correlations (r = 0.72 and r = 0.67, respectively). Moreover, the SUHI served as a mediating role between land use/cover change and electricity consumption, with the direct effect accounting for 36% and the indirect effect accounting for 64% of the total effect. In contrast, the NDBI was significantly positively correlated with energy consumption in winter (r = 0.53). Spline regression analysis further revealed that every one-unit increase in this index corresponded to an increase of approximately 22 million kWh in summer EC and an increase of approximately 1.16 billion kWh in winter EC. Full article

Groundwater constitutes the primary source of liquid freshwater on Earth and is essential for ecosystems, agriculture, and human consumption. However, rising demand, urbanization, and climate change have intensified groundwater depletion, particularly in semi-arid regions. Therefore, assessing groundwater recharge zones is essential for sustainable water resource management in vulnerable areas such as Dera Ismail Khan, Pakistan. This study aims to delineate groundwater potential zones (GWPZs), using an integrated approach combining the Geographic Information System (GIS), remote sensing (RS), and the analytical hierarchy process (AHP). Twelve factors were identified in a study conducted using GIS-based AHP to determine the groundwater recharge zones in the region. These include land use/land cover (LULC), rainfall, drainage density, soil type, slope, road density, water table depth, and remote sensing indices such as Normalized Difference Vegetation Index (NDVI), Normalized Difference Built-up Index (NDBI), Moisture Stress Index (MSI), Worldview Water Index (WVWI), and Land Surface Temperature (LST). The results show that 17.52% and 2.03% of the area have “good” and “very good” potential for groundwater recharge, respectively, while 48.63% of the area has “moderate” potential. Furthermore, gentle slopes (0–2.471°), high drainage density, shallow water depths (20–94 m), and densely vegetated areas (with a high NDVI) are considered important influencing factors for groundwater recharge. Conversely, areas with steep slopes, high temperatures, and dense built-up areas showed “poor” potential for recharge. This approach demonstrates the effectiveness of integrating advanced remote sensing indices with the AHP model in a semi-arid context, validated through high-accuracy field data (Kappa = 0.93). This methodology offers a cost-effective decision support tool for sustainable groundwater planning in similar environments. Full article

The semantic segmentation of remote sensing images is vital for accurate surface monitoring and environmental assessment. Multimodal remote sensing images (RSIs) provide a more comprehensive dimension of information, enabling faster and more scientific decision-making. However, existing methods primarily focus on modality and spectral channels when utilizing spectral features, with limited consideration of their association to ground object types. This association, commonly referred to as the spectral characteristics of ground objects (SCGO), results in distinct spectral responses across different modalities and holds significant potential for improving the segmentation accuracy of multimodal RSIs. Meanwhile, the inclusion of redundant features in the fusion process can also interfere with model performance. To address these problems, a ground object spectral feature awareness network (SFANet) specifically designed for RSIs that effectively leverages spectral features by incorporating the SCGO is proposed. SFANet includes two innovative modules: (1) the Spectral Aware Feature Fusion module, which integrates multimodal features in the encoder based on SCGO, and (2) the Adaptive Spectral Enhancement module, which reduces the confusion from redundant information in the decoder. SFANet significantly improves the mIoU by 5.66% and 4.76% compared to the baseline on two datasets, outperforming existing multimodal RSIs segmentation networks by adaptively enhanced spectral feature awareness. SFANet demonstrates significant advancements over other multimodal RSIs segmentation networks and provides new perspectives for RSI-specific network design by incorporating spectral characteristics. This work offers new perspectives for the design of segmentation networks for RSIs. Full article

Drone object detection serves as a fundamental task for more advanced applications. However, drone images typically exhibit challenges such as small object sizes, dense distributions, and high levels of overlap. Traditional object detection networks struggle to achieve the required accuracy and efficiency under these conditions. In this paper, we propose DAU-YOLO, a novel object detection method tailored for drone imagery, built upon the YOLOv11 framework. To enhance feature extraction, a Receptive-Field Attention (RFA) module is introduced in the backbone, allowing adaptive convolution kernel adjustments across different local regions, thereby addressing the challenge of dense object distributions. In the neck, we propose a Dynamic Attention and Upsampling (DAU) module, which incorporates additional low-level features rich in small-object information. Furthermore, Scale-Diffusion Attention and Task-Aware Attention are employed to refine these features, significantly improving the network’s ability to detect small objects. To maintain an extremely lightweight architecture, the bottom-most Bottom–Up layer is removed, reducing model complexity without compromising detection accuracy. In the experiments, the proposed method achieves state-of-the-art (SOTA) performance on the VisDrone2019 dataset. On the validation set, DAU-YOLO(l) attains an $mA{P}_{50}$ of 56.1%, surpassing the baseline YOLOv11(l) by 9.1% and the latest similar-structure method Drone-YOLO(l) by 4.8%, while maintaining only 28.9M parameters, almost half those of Drone-YOLO(l). In the discussion, we provide a detailed analysis of the improvements in small object detection as well as the trade-off between detection accuracy and inference speed. These results demonstrate the effectiveness of DAU-YOLO in addressing the challenges of drone object detection, offering a highly accurate and lightweight solution for real-time applications in complex aerial scenes. Full article

This work presents the use of remote sensing data for land cover mapping with a case of Central Apennines, Italy. The data include 8 Landsat 8-9 Operational Land Imager/Thermal Infrared Sensor (OLI/TIRS) satellite images in six-year period (2018–2024). The operational workflow included satellite image processing which were classified into raster maps with automatically detected 10 classes of land cover types over the tested study. The approach was implemented by using a set of modules in Geographic Resources Analysis Support System (GRASS) Geographic Information System (GIS). To classify remote sensing (RS) data, two types of approaches were carried out. The first is unsupervised classification based on the MaxLike approach and clustering which extracted Digital Numbers (DN) of landscape feature based on the spectral reflectance of signals, and the second is supervised classification performed using several methods of Machine Learning (ML), technically realised in GRASS GIS scripting software. The latter included four ML algorithms embedded from the Python’s Scikit-Learn library. These classifiers have been implemented to detect subtle changes in land cover types as derived from the satellite images showing different vegetation conditions in spring and autumn periods in central Apennines, northern Italy. Full article