Search Results (30)

Bridges play a key and controlling role in transportation systems. Steel bridges are favored for their high strength, good seismic performance, and convenient construction. As important node connectors of steel bridges, high-strength bolts are extremely susceptible to damage such as corrosion and loosening. Therefore, accurate identification of bolt loosening is crucial. First, a new type of adhesive piezoelectric sensor is designed and prepared using PMN-PT piezoelectric single-crystal materials. The PMN-PT sensor and polyvinylidene fluoride (PVDF) sensor are subjected to steel plate fixed frequency load and swept frequency load tests to test the performance of the two sensors. Then, a steel plate component connected by high-strength bolts is designed. By applying exciter square wave load to the structure, the vibration response characteristics of the structure are analyzed to identify the loosening of the bolts. In addition, a piezoelectric smart washer sensor is designed to make up for the shortcomings of the adhesive piezoelectric sensor, and the effectiveness of the piezoelectric smart washer sensor is verified. Finally, a bolt loosening index is proposed to quantitatively evaluate the looseness of the bolt. The results show that the sensitivity of the PMN-PT sensor is 21 times that of the PVDF sensor. Compared with the peak stress change, the natural frequency change is used to identify the bolt loosening more effectively. Piezoelectric smart washer sensor and bolt loosening indicator can be used for bolt loosening identification. Full article

For relaxor ferroelectric single crystal (1 − x)Pb(Mg_1/3Nb_2/3)O₃ − xPbTiO₃ (PMN-PT), through reasonable component regulation and electric field polarization, an orthogonal mm² point group structure can be obtained, which has high piezoelectric constants and is, therefore, a desired substrate material for lateral-field-excited (LFE) bulk acoustic wave (BAW) devices. In this work, acoustic wave resonance characteristics of (zxt) 45° PMN-PT BAW devices with LFE are investigated. Firstly, Mindlin first-order plate theory is used to obtain vibration governing equations of orthorhombic crystals excited by a lateral electric field. By analyzing the electrically forced vibrations of the finite plate, the basic vibration characteristics, such as motional capacitance, resonant frequency, and mode shape are obtained, and influences of different electrode parameters on resonance characteristics of the device are investigated. In addition, the effects of the structure parameters on the mass sensitivity of the devices are analyzed and further verified by FEM simulations. The model presented in this study can be conveniently used to optimize the structural parameters of LFE bulk acoustic wave devices based on orthorhombic crystals, which is crucial to obtain good resonance characteristics. The results provide an important basis for the design of LFE bulk acoustic wave resonators and sensors by using PMN-PT orthorhombic crystals. Full article

The morphotropic phase boundary (MPB) with multiphase coexistence serves as a critical region for piezoelectric materials, but the individual contributions of various microscopic mechanisms to the overall electromechanical response remains a challenge for further subdivision. Here, we systematically investigate the microscopic origins of outstanding piezoelectricity in <001>-oriented Pb(Mg_1/3Nb_2/3)O₃-30PbTiO₃ (PMN-30PT) single crystals and quantitatively identify the dominant factors for giant electrostrain and ultrahigh piezoelectric coefficient. Large electrostrain arises predominantly from polarization rotation within the easily distorted monoclinic phase and the high-energy-barrier monoclinic-to-tetragonal phase transition, enabled by a synergistic interplay of broad electric field adaptability and high strain sensitivity. In contrast, the peak piezoelectric coefficient (d₃₃ > 2100 pC/N) is attributed to the low-energy-barrier rhombohedral-to-monoclinic phase transition, which facilitates polarization rotation. Furthermore, the critical yet distinct roles of monoclinic phase compared to piezoelectric and electrostrain have been confirmed. By the quantitative segmentation of various microscopic factors, this work provides fundamental insights into the design of high-performance piezoelectrics. Full article

[011] poled relaxor-PT single crystals provide superior piezoelectric constants and electromechanical coupling factors in the 32 crystal directions, and also exhibit high electrical stability under compressive stresses and temperature changes. In particular, Mn-doped Pb(In_1/2Nb_1/2)O₃-Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ (Mn:PIN-PMN-PT) single crystals show a superior coercive field (E_C ≥ 8.0 kV/cm) and mechanical quality factor (Q_m ≥ 1030), making them suitable for high-power transducers. The high-power characteristics of [011] poled single crystals have been verified from a material perspective; thus, further investigation is required from a transducer perspective. In this study, the high-power characteristics of piezoelectric transducers based on [011] poled PIN-PMN-PT and [011] poled Mn:PIN-PMN-PT single crystals were investigated. To analyze the driving limits of the single crystals, the polarization–electric field (P–E) curves, as a function of the driving electric field, were measured. The results showed that [011] poled Mn:PIN-PMN-PT single crystals demonstrate lower energy loss and THD (Total Harmonic Distortion), directly relating to the driving efficiency and linearity of the transducer. Additionally, [011] poled Mn:PIN-PMN-PT crystals provide excellent stability under the compressive stress and temperature changes. To analyze the high-power characteristics of [011] poled single-crystal transducers, two types of barrel-stave transducers, based on [011] poled PIN-PMN-PT and [011] poled Mn:PIN-PMN-PT, were designed and fabricated. The changes in the impedance and transmitting voltage response with respect to the driving electric fields were measured, and the energy loss and THD of the transducers with respect to the driving electric fields were examined to assess the driving limit of the [011] poled single-crystal transducer. The high-power characteristic tests confirmed the stability of [011] poled Mn:PIN-PMN-PT single crystals and verified their potential for high-power transducer applications. Full article

Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ single crystals (PMN-PT SCs) are widely utilized in high-performance piezoelectric devices due to their exceptional piezoelectric properties. Among the various post-processing techniques for domain engineering in PMN-PT SCs, alternating current polarization (ACP) has become a widely adopted method for enhancing piezoelectric performance. This study proposes a new ultrahigh-temperature field-cooling polarization (UFCP) technique, combining direct current polarization (DCP) and ACP with field cooling above the Curie temperature. Dielectric spectra indicate that the UFCP method promotes electric field-induced phase transitions above the Curie point, forming a stable multiphase configuration. The transverse piezoelectric coefficient $d_{31}$ of UFCP SCs is $1126\mathrm{p}\mathrm{C}/\mathrm{N}$, and the electromechanical coupling factor $k_{31}$ is 0.559. Compared with traditional DCP, UFCP increases $d_{31}$ by 68.6%, the mechanical quality factor $Q_m$ by 16.7%, and the piezoelectric figure of merit (FOM) by 98.3%. Furthermore, under high-power excitation with a root-mean-square voltage of $15\mathrm{V}$, UFCP achieves a 343% increase in power and a 130.5% improvement in the FOM compared with DCP, demonstrating its potential for enhancing high-power performance in practical applications. Full article

Piezoelectric composites, which consist of piezoelectric materials and polymers, are widely employed in various applications such as underwater sonar transducers and medical diagnostic ultrasonic transducers. Acoustic transducers based on piezoelectric composites can have high sensitivity with broad bandwidth. In recent studies, it is demonstrated that 2-2 composites based on single crystals provide further increased sensitivity and wide bandwidth. In order to utilize a 2-2 composite in acoustic sensors, it is required to demonstrate the full material coefficients of the 2-2 composite. In this study, we investigated an analytic solution for determining equivalent material coefficients of a 2-2 composite. Impedance spectrums of the single-phase resonators with equivalent material coefficients and 2-2 composite resonators were compared by the finite element method in order to verify the analytic solutions. Furthermore, the equivalent material coefficients derived from the analytic solution were also verified by comparing the measured and the simulated impedance spectrums. The difference in resonance and anti-resonance frequencies between the measured and simulated impedance spectrums was around 0.5% and 1.2%. By utilizing the analytic solutions in this study, it is possible to accurately derive full equivalent material coefficients of a 2-2 composite, which are essential for the development of acoustic sensors. Full article

Multifunctional sensors have played a crucial role in constructing high-integration electronic networks. Most of the current multifunctional sensors rely on multiple materials to simultaneously detect different physical stimuli. Here, we demonstrate the large piezo-pyroelectric effect in ferroelectric Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ (PMN-PT) single crystals for simultaneous pressure and temperature sensing. The outstanding piezoelectric and pyroelectric properties of PMN-PT result in rapid response speed and high sensitivity, with values of 46 ms and 28.4 nA kPa⁻¹ for pressure sensing, and 1.98 s and 94.66 nC °C⁻¹ for temperature detection, respectively. By leveraging the distinct differences in the response speed of piezoelectric and pyroelectric responses, the piezo-pyroelectric effect of PMN-PT can effectively detect pressure and temperature from mixed-force thermal stimuli, which enables a robotic hand for stimuli classification. With appealing multifunctionality, fast speed, high sensitivity, and compact structure, the proposed self-powered bimodal sensor therefore holds significant potential for high-performance artificial perception. Full article

The relaxor ferroelectric single crystal (1−x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃ (PMN-PT) has high piezoelectric constants, and thus has a good application prospect in the field of highly sensitive piezoelectric sensors. In this paper, for relaxor ferroelectric single crystal PMN-PT, the bulk acoustic wave characteristics on pure- and pseudo-lateral-field-excitation (pure- and pseudo-LFE) modes are investigated. LFE piezoelectric coupling coefficients and acoustic wave phase velocities for PMN-PT crystals in different cuts and electric field directions are calculated. On this basis, the optimal cuts of pure-LFE and pseudo-LFE modes of relaxor ferroelectric single crystal PMN-PT are obtained, namely, (zxt)45° and (zxtl)90°/90°, respectively. Finally, finite element simulations are carried out to verify the cuts of pure-LFE and pseudo-LFE modes. The simulation results show that the PMN-PT acoustic wave devices in pure-LFE mode have good energy-trapping effects. For PMN-PT acoustic wave devices in pseudo-LFE mode, when the device is in air, no obvious energy-trapping emerges; when the water (as a virtual electrode) is added to the surface of the crystal plate, an obvious resonance peak and the energy-trapping effect appears. Therefore, the PMN-PT pure-LFE device is suitable for gas-phase detections. While the PMN-PT pseudo-LFE device is suitable for liquid-phase detections. The above results verify the correctness of the cuts of the two modes. The research results provide an important basis for the development of highly sensitive LFE piezoelectric sensors based on relaxor ferroelectric single crystal PMN-PT. Full article

Piezoelectric composites, which consist of a piezoelectric material and a polymer, have been extensively studied for the applications of underwater sonar sensors and medical diagnostic ultrasonic transducers. Acoustic sensors utilizing piezoelectric composites can have a high sensitivity and wide bandwidth because of their high piezoelectric coefficient and low acoustic impedance compared to single-phase piezoelectric materials. In this study, a thickness-mode driving hydrophone utilizing a 2-2 piezoelectric single crystal composite was examined. From the theoretical and numerical analysis, material properties that determine the bandwidth and sensitivity of the thickness-mode piezoelectric plate were derived, and the voltage sensitivity of piezoelectric plates with various configurations was compared. It was shown that the 2-2 composite with [011] poled single crystals and epoxy polymers can provide high sensitivity and wide bandwidth when used for hydrophones with a thickness resonance mode. The hydrophone element was designed and fabricated to have a thickness mode at a frequency around 220 kHz by attaching a composite plate of quarter-wavelength thickness to a hard baffle. The fabricated hydrophone demonstrated an open circuit voltage sensitivity of more than −180 dB re 1 V/μPa at the resonance frequency and a −3 dB bandwidth of more than 55 kHz. The theoretical and experimental studies show that the 2-2 single crystal composite can have a high sensitivity and wide bandwidth compared to other configurations of piezoelectric elements when they are used for thickness-mode hydrophones. Full article

A vector hydrophone is an underwater acoustic sensor that can detect the direction of a sound source. Wide-band characteristics and high sensitivity enhance the performance of underwater surveillance systems in complex environments. A vector hydrophone comprising a triaxial piezoelectric accelerometer and spherical hydrophone was fabricated and tested in the air and underwater. The vector hydrophone was designed to exceed the quantitative figures of merit (i.e., receiving voltage sensitivity and bandwidth) of commercially available hydrophones. Accelerometer performance was enhanced by placing a pair of piezoelectric single crystals on each axis and modifying the seismic mass material. The receiving voltage sensitivity of the omnidirectional hydrophone was approximately −160 dB relative to $1 \mathrm{V}/\mathsf{\mu }\mathrm{Pa}$ with the amplifier in water; the sensitivity of the accelerometer exceeded 300 mV/g in air and −215 dB relative to $1 \mathrm{V}/\mathsf{\mu }\mathrm{Pa}$ underwater over the frequency range of interest. The receiving directivity of the vector hydrophone was validated underwater, which confirmed that it could detect the direction of a sound source. Full article

The possibility to control the charge, type, and density of domain walls allows properties of ferroelectric materials to be selectively enhanced or reduced. In ferroelectric–ferroelastic materials, two types of domain walls are possible: pure ferroelectric and ferroelastic–ferroelectric. In this paper, we demonstrated a strategy to control the selective ferroelectric or ferroelastic domain wall formation in the (111) single-domain rhombohedral PMN-PT single crystals at the nanoscale by varying the relative humidity level in a scanning probe microscopy chamber. The solution of the corresponding coupled electro-mechanical boundary problem allows explaining observed competition between ferroelastic and ferroelectric domain growth. The reduction in the ferroelastic domain density during local switching at elevated humidity has been attributed to changes in the electric field spatial distribution and screening effectiveness. The established mechanism is important because it reveals a kinetic nature of the final domain patterns in multiaxial materials and thus provides a general pathway to create desirable domain structure in ferroelectric materials for applications in piezoelectric and optical devices. Full article

High-performance broadband ultrasound transducers provide superior imaging quality in biomedical ultrasound imaging. However, a matching design that perfectly transmits the acoustic energy between the active piezoelectric element and the target medium over the operating spectrum is still lacking. In this work, an anisotropic gradient acoustic impedance composite material as the matching layer of an ultrasonic transducer was designed and fabricated; it is a non-uniform material with the continuous decline of acoustic impedance along the direction of ultrasonic propagation in a sub-wavelength range. This material provides a broadband window for ultrasonic propagation in a wide frequency range and achieves almost perfect sound energy transfer efficiency from the piezoelectric material to the target medium. Nano tungsten particles and epoxy resin were selected as filling and basic materials, respectively. Along the direction of ultrasonic propagation, the proportion of tungsten powder was carefully controlled to decrease gradually, following the natural exponential form in a very narrow thickness range. Using this new material as a matching layer with high-performance single crystals, the −6 dB bandwidth of the PMN-PT ultrasonic transducer could reach over 170%, and the insertion loss was only −20.3 dB. The transducer achieved a temporal signal close to a single wavelength, thus there is the potential to dramatically improve the resolution and imaging quality of the biomedical ultrasound imaging system. Full article

Ultrasonic transducers are the basic core component of diagnostic imaging devices, wherein the piezoelectric materials are the active element of transducers. Recent studies showed that the alternating current poling (ACP) method could develop the properties of piezocomposites, which had great potential to improve transducer performance. Herein, transducers (f_c = 3 MHz) made of DCP and ACP 1–3 piezocomposites (prepared by PZT-5H ceramics and PMN-PT single crystals) were fabricated. The effect of the ACP method on the bandwidth and insertion loss (sensitivity) was explored. The results indicate that the ACP method can significantly enhance the bandwidth and slightly increase the insertion loss of transducers. Particularly, a superhigh bandwidth of 142.8% was achieved in the transducer of ACP 1–3 PMN-PT single crystal combined with suitable matching and backing layers. This bandwidth is higher than that of all reported transducers with similar center frequency. Moreover, the optimization mechanism of transducer performance by the ACP method was discussed. The obtained results suggested that the ACP is an effective and convenient technology to improve transducer performances, especially for the bandwidth. Full article

Mn-doped Pb(In_1/2Nb_1/2)O₃-Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ (Mn:PIN-PMN-PT) single crystals are attractive piezoelectric materials owing to their high mechanical quality factor. However, the single crystal boules grown by the conventional Bridgman method show compositional variation along the growth direction. In particular, the Mn content exhibits large variation due to its severe segregation. To improve the compositional uniformity, we applied the continuous-feeding Bridgman method to the growth of a Mn:PIN-PMN-PT single crystal boule. Then, the composition and property distributions of the boule along the growth direction were evaluated. The results showed that excellent composition and property uniformity were carried out over 80mm in boule length. The ranges of the electromechanical coupling coefficient (k₃₃) and the piezoelectric coefficient (d₃₃) were 0.931–0.934 and 1352–1517 pC/N, respectively. The ranges of the mechanical quality factor (Qm₃₁) and the depolarization field (E_d) were 417–535 and 785–859 V/mm, respectively. The Qm₃₁ and the E_d values were higher than those of the non-doped PIN-PMN-PT single crystals. The continuous-feeding Bridgman method is therefore an effective technique for improving the uniformity of the Mn content. As a result, the Mn:PIN-PMN-PT single crystal grown by the continuous-feeding Bridgman method possesses excellent property uniformity with characteristics suitable for high power piezoelectric applications. Full article

A relaxor-based ferroelectric single crystal with the nominal composition of xPb(Sm_0.5Nb_0.5)O₃-(0.7‒x) Pb(Mg_1/3Nb_1/3)O₃-0.3PbTiO₃ (x = 0.01, 0.02, and 0.03) was grown by the vertical Bridgman process. The electrical properties and the ferroelectric domains, as well as the luminescent characteristics of the single crystals, were investigated systematically. The piezoelectric coefficient d₃₃ of the single crystals are slightly higher than that of the undoped PMN-PT single crystal under direct current polarization, while the crystal wafers gain a much higher d₃₃ value upon being polarized with alternating current voltage. The single crystals possess a decreased phase transition temperature of around 60 °C and a decreased Curie temperature of 92~116 °C compared with the undoped PMN-PT single crystal. The crystal wafers polarized with alternating current voltage exhibited a desirable optical transmittance, which is associated with the domain structure changes inside the crystal medium. The domain density of the crystal wafers under alternating current polarization was significantly decreased compared with the direct current polarized crystal wafers. The luminescent spectra of the crystal wafers exhibit the typical emission peaks corresponding to the characteristic transition of Sm³⁺ ions in the crystal lattice. Full article