Search Results (64)

The increasing use of pharmaceutically active compounds (PhACs), endocrine-disrupting compounds (EDCs), and personal care products (PCPs) has led to the widespread presence of organic micropollutants (OMPs) in aquatic environments, posing a significant global challenge for environmental conservation. In recent years, advanced materials-based nanofiltration (NF) technologies have emerged as a promising solution for water and wastewater treatment. This review begins by examining the sources of OMPs, as well as the risk of OMPs. Subsequently, the key criteria of NF membranes for OMPs are discussed, with a focus on the roles of pore size, charge property, molecular interaction, and hydrophilicity in the separation performance. Against that background, this review summarizes and analyzes recent advancements in materials such as metal organic frameworks (MOFs), covalent organic frameworks (COFs), graphene oxide (GO), MXenes, hybrid materials, and environmentally friendly materials. It highlights the porous nature and structural diversity of organic framework materials, the advantage of inorganic layered materials in forming controllable nanochannels through stacking, the synergistic effects of hybrid materials, and the importance of green materials. Finally, the challenges related to the performance optimization, scalable fabrication, environmental sustainability, and complex separation of advanced materials-based membranes for OMP removal are discussed, along with future research directions and potential breakthroughs. Full article

In this paper, MXene nanosheets were used as nano additives for the preparation of MXene-modified polyvinyl chloride (PVC) mixed max membranes (MMMs) for the rejection of lead (Pb²⁺) ions from wastewater. MXene nanosheets were introduced into the PVC matrix to enhance membrane performance, hydrophilicity, contact angle, porosity, and resistance to fouling. Modeling and optimization techniques were used to examine the effects of important operational and fabrication parameters, such as pH, contaminant concentration, nanoadditive (MXene) content, and operating pressure. Predictive models were developed using experimental data to assess the membranes’ performance in terms of flux and Pb²⁺ rejection. The ideal circumstances that struck a balance between long-term operating stability and high removal efficiency were found through multi-variable optimization. The optimized conditions for the best rejection of Pb²⁺ ions and the most stable permeability over time among the membranes that were manufactured were the initial metal ions concentration (2 mg/L), pH (7.89), pressure (2.99 bar), and MXene mass (0.3 g). The possibility of combining MXene nanoparticles with methodical optimization techniques to create efficient membranes for the removal of heavy metals in wastewater treatment applications is highlighted by this work. Full article

Developing advanced antimicrobial agents is critically imperative to address antibiotic-resistant infection crises. MXenes have emerged as a potential nanomedicine for antibacterial applications, but they suffer from suboptimal photothermal conversion efficiency and inherent cytotoxicity. Herein, we report the synthesis of MXene (Ti₃C₂)-based nanohybrids and hybrid membranes through firstly interfacial conjugation of self-assembled β-lactoglobulin nanofibers (β-LGNFs)-inspired copper sulfide nanoparticles (CuS NPs) onto MXene nanosheets, and subsequent vacuum filtration of the created β-LGNF-CuS/MXene nanohybrids. The constructed β-LGNF-CuS/MXene nanohybrids exhibit excellent photothermal conversion performances and satisfactory biocompatibility and minimal cytotoxicity toward mammalian cells, ascribing to the introduction of highly biocompatible β-LGNFs into the hybrid system. In addition, the fabricated β-LGNF-CuS/MXene hybrid membranes demonstrate high efficiency in antibacterial application through the synergistic photothermal and material-related antibacterial effects of both MXene and CuS NPs. Therefore, the ideas and findings shown in this study are useful for inspiring researchers to design and fabricate functional and biocompatible 2D material-based hybrid membranes for antimicrobial applications. Full article

Although membrane technology has been widely applied in water treatment, membrane fouling is an inevitable issue that has largely limited its application. Benefiting from the advantages of green power, easy integration and low chemical consumption, electrocatalytic membrane (ECM) technology received attention, using it to enable electrically driven self-cleaning performance recently, making it highly desirable for sustainable fouling control. In this work, we comprehensively summarized the conventional (e.g., carbonaceous materials, metal and metal oxide) and emerging (e.g., metal–organic framework and MXene) materials for the fabrication of an ECM. Then the fabrication methods and operating modes of an ECM were emphasized. Afterwards, the application of different ECM materials in membrane fouling control was highlighted and the corresponding mechanism was revealed. Based on existing research findings, we proposed the challenges and future prospects of ECM materials for practical application. This study provides enlightening knowledge into the development of ECM materials for sustainable fouling control. Full article

The transition toward sustainable and decentralized energy solutions necessitates the development of innovative bioelectronic systems capable of harvesting and converting renewable energy. Here, we present a novel photo-bioelectrochemical fuel cell architecture based on a biohybrid anode integrating laser-induced graphene (LIG), poly(3,4-ethylenedioxythiophene) (PEDOT), and isolated thylakoid membranes. LIG provided a porous, conductive scaffold, while PEDOT enhanced electrode compatibility, electrical conductivity, and operational stability. Compared to MXene-based systems that involve complex, multi-step synthesis, PEDOT offers a cost-effective and scalable alternative for bioelectrode fabrication. Thylakoid membranes were immobilized onto the PEDOT-modified LIG surface to enable light-driven electron generation. Electrochemical characterization revealed enhanced redox activity following PEDOT modification and stable photocurrent generation under light illumination, achieving a photocurrent density of approximately 18 µA cm⁻². The assembled photo-bioelectrochemical fuel cell employing a gas diffusion platinum cathode demonstrated an open-circuit voltage of 0.57 V and a peak power density of 36 µW cm⁻² in 0.1 M citrate buffer (pH 5.5) under light conditions. Furthermore, the integration of a charge pump circuit successfully boosted the harvested voltage to drive a low-power light-emitting diode, showcasing the practical viability of the system. This work highlights the potential of combining biological photosystems with conductive nanomaterials for the development of self-powered, light-driven bioelectronic devices. Full article

In this study, polyethersulfone (PES)/sulfonated polyethersulfone (SPES) composite nanofiltration membranes doped with different contents of monolayer titanium carbide nanosheets (Ti₃C₂T_X) were prepared by the nonsolvent induced phase inversion (NIPS) method. The effects of Ti₃C₂T_X on membrane structure, separation performance and antibacterial activity were investigated systematically. The results demonstrated that the viscosity of the casting solution increased significantly with the increasing content of Ti₃C₂T_X. In addition, the pore size of the membrane surface first decreased and then increased; porosity and hydrophilicity were optimized synchronously; and the density of negative charges on the surface increased. The M2 membrane showed a rejection rate of more than 90% for Metanil yellow (MY) and methylene blue (MEB). The order of salt ion rejection rates was magnesium sulfate (MgSO₄) > sodium sulfate (Na₂SO₄) > sodium chloride (NaCl), and water flux reached the peak (18.5 L/m²·h·bar). The antibacterial activity of the M2 membrane was significantly enhanced, and its antibacterial rate against Bacillus subtilis increased from 15% (M0) to 58%. This phenomenon was attributed to the synergistic mechanism of the Ti₃C₂T_X physical capture effect, reactive oxygen species (ROS) generation and sharp edge damage to bacterial cell membranes. This study provides theoretical support and a technical path for the development of MXene composite membranes with high separation efficiency and excellent antibacterial properties. Full article

Cellulose nanofibrils (CNFs) are promising materials for flexible and green supercapacitor electrodes, while Ti₃C₂T_x MXene exhibits high specific capacitance. However, the diffusion limitation of ions and chemical instability in the generally used highly basic (KOH, MXene oxidation) or acidic (H₂SO₄, CNF degradation) electrolytes limits their performance and durability. Herein, freestanding CNF/MXene cryogel membranes were prepared by deep freeze-casting (at −50 and −80 °C), using different weight percentages of components (10, 50, 90), and evaluated for their structural and physico-chemical stability in other less aggressive aqueous electrolyte solutions (Na₂/Mg/Mn/K₂-SO₄, Na₂CO₃), to examine the influence of the ions transport on their pseudocapacitive properties. While the membrane prepared with 50 wt% (2.5 mg/cm²) of MXene loading at −80 °C shrank in a basic Na₂CO₃ electrolyte, the capacitance was performed via the forming of an electroactive layer on its interface, giving it high stability (90% after 3 days of cycling) but lower capacitance (8 F/g at 2 mV/s) than in H₂SO₄ (25 F/g). On the contrary, slightly acidic electrolytes extended the cations’ transport path due to excessive but still size-limited diffusion of the hydrated ions (SO₄²⁻ > Na⁺ > Mn²⁺ > Mg²⁺) during membrane swelling, which blocked it, reducing the electroactive surface area and lowering conductivities (<3 F/g). Full article

Edge-capping modified MXene membranes with new channels created by lateral nanosheets are of great research significance. After introducing tripolyphosphate (STPP) to Ti edges of Ti₃C₂T_x nanosheets and fabricating the STPP-MXene membranes edge-capping method, this research investigated the performance optimization mechanism of STPP-modified MXene membranes in terms of salt permeability (NaCl, Na₂SO₄, MgCl₂, and MgSO₄) and transmembrane energy barriers (E_salt) through the concentration gradient permeation test. Experimental results demonstrated an approximately 1.86-fold enhancement in salt flux (J_s) compared to the MXene membranes. The solution–diffusion model was also introduced to evaluate the salt solubility (K_s) and diffusivity (D_s) during permeation. Furthermore, analysis of transmembrane energy barriers revealed that STPP modification induced significantly larger reductions in activation energy for magnesium salts (MgSO₄: 55.1%; MgCl₂: 47.4%) compared to sodium salts (NaCl: 30.5%; Na₂SO₄: 30.9%). This phenomenon indicated the weakened electrostatic interactions between high-valent Mg²⁺ and the modified lateral membrane Ti edges, whereas the limited charge density of Na⁺ resulted in relatively modest optimization. The results highlight the contribution of STPP capping on the edges of adjacent lateral nanosheets. Therefore, the modification increased the transportation rate of cations across the MXene membrane by more than twice, thus advancing the application of 2D MXene membranes in resource recovery. Full article

The development of functional materials and the use of nanotechnology are ongoing projects. These fields are closely linked, but there is a need to combine them more actively. Nanoarchitectonics, a concept that comes after nanotechnology, is ready to do this. Among the related research efforts, research into creating functional materials through the formation of thin layers on surfaces, molecular membranes, and multilayer structures of these materials have a lot of implications. Layered structures are especially important as a key part of nanoarchitectonics. The diversity of the components and materials used in layer-by-layer (LbL) assemblies is a notable feature. Examples of LbL assemblies introduced in this review article include quantum dots, nanoparticles, nanocrystals, nanowires, nanotubes, g-C₃N₄, graphene oxide, MXene, nanosheets, zeolites, nanoporous materials, sol–gel materials, layered double hydroxides, metal–organic frameworks, covalent organic frameworks, conducting polymers, dyes, DNAs, polysaccharides, nanocelluloses, peptides, proteins, lipid bilayers, photosystems, viruses, living cells, and tissues. These examples of LbL assembly show how useful and versatile it is. Finally, this review will consider future challenges in layer-by-layer nanoarchitectonics. Full article

Oseltamivir is a drug that has been widely used to prevent and treat influenza A and B. In this work, an ultrasensitive, simple, and novel electrochemiluminescence (ECL) sensor combined with molecularly imprinted polymers (MIP-ECL) based on a graphene-like two-dimensional material, Mxene quantum dots (MQDs) was constructed to selectively detect oseltamivir. A molecularly imprinted polymer membrane containing an oseltamivir template was constructed by electropolymerization and elution of modified MQDs on a glassy carbon electrode. Under optimized experimental conditions, the MIP-ECL sensor could detect oseltamivir in the range of 10⁻¹⁰ to 10⁻⁶ M (R² = 0.9816), with a low limit of detection of 6.5 × 10⁻¹¹ M (S/N = 3), and the recovery rates of oseltamivir in biological samples were 92.21–104.2%, with relative standard deviations of 3.70%~5.70%. The developed MIP-ECL sensor provides a new idea for detecting oseltamivir, which was successfully applied to the determination of oseltamivir in serum samples, indicating great potential for application in clinical diagnostics. Full article

Two-dimensional (2D) nanofluidic channels are emerging as potential candidates for harnessing osmotic energy from salinity gradients. However, conventional 2D nanofluidic membranes suffer from high transport resistance and low ion selectivity, leading to inefficient transport dynamics and limiting energy conversion performance. In this study, we present a novel composite membrane consisting of porous MXene (PMXene) nanosheets featuring etched nanopores, in conjunction with cellulose nanofibers (CNF), yielding enhancement in ion flux and ion selectivity. A mild H₂O₂ oxidant is employed to etch and perforate the MXene sheets to create a robust network of cation transportation nanochannels that effectively reduces the energy barrier for cation transport. Additionally, CNF with a unique nanosize and high charge density further enhances the charge density and mechanical stability of the nanofluidic system. Under neutral pH and room temperature, the PMXene/CNF membrane demonstrates a maximum output power density of 0.95 W·m⁻² at a 50-fold KCl gradient. Notably, this represents a 43% improvement over the performance of the pristine MXene/CNF membrane. Moreover, 36 nanofluidic devices connected in series are demonstrated to achieve a stable voltage output of 5.27 V and power a calculator successfully. This work holds great promise for achieving sustainable energy harvesting with efficient osmotic energy conversion utilization. Full article

The application of antibiotics has advanced modern medicine significantly. However, the abuse and discharge of antibiotics have led to substantial antibiotic residues in water, posing great harm to natural organisms and humans. To address the problem of antibiotic degradation, this study developed a novel catalytic membrane by depositing Co catalysts onto MXene nanosheets and fabricating the polyethersulfone composite (Co@MXene/PES) using vacuum-assisted self-assembly. The dual role of MXene as both a carrier for Co atoms and an enhancer of interlayer spacing led to improved flux and catalytic degradation capabilities of the membrane. Experimental results confirmed that the Co@MXene/PES membrane effectively degraded antibiotics through peroxymonosulfate activation, achieving up to 95.51% degradation at a cobalt concentration of 0.01 mg/mL. The membrane demonstrated excellent antibacterial properties, minimal flux loss after repeated use, and robust anti-fouling performance, making it a promising solution for efficient antibiotic removal and stable water treatment. Full article

As global demand for renewable energy and electric vehicles increases, the need for lithium has surged significantly. Extracting lithium from salt lake brine has become a cutting-edge technology in lithium resource production. In this study, two-dimensional (2D) GO/MXene composite membranes were fabricated using pressure-assisted filtration with a polyethyleneimine (PEI) coating, resulting in positively charged PEI-GO/MXene membranes. These innovative membranes, taking advantage of the synergistic effects of interlayer channel sieving and the Donnan effect, demonstrated excellent performance in Mg²⁺/Li⁺ separation with a mass ratio of 20 (Mg²⁺ rejection = 85.3%, Li⁺ rejection = 16.7%, S_Li,Mg = 5.7) in simulated saline lake brine. Testing on actual salt lake brine in Tibet, China, confirmed the composite membrane’s potential for effective Mg²⁺/Li⁺ separation. In the actual brine test with high concentration, Mg²⁺/Li⁺ after membrane separation is 2.2, which indicates that the membrane can significantly reduce the concentration of Mg²⁺ in the brine. Additionally, the PEI-GO/MXene composite membrane demonstrated strong anti-swelling properties and effective divalent ion rejection. This research presents an innovative approach to advance the development of 2D membranes for the selective removal of Mg²⁺ and Li⁺ from salt lake brine. Full article

One of the most critical problems faced by modern civilization is the depletion of freshwater resources due to their continuous consumption and contamination with different organic and inorganic pollutants. This paper considers the potential of already discovered MXenes in combination with carbon nanomaterials to address this problem. MXene appears to be a highly promising candidate for water purification due to its large surface area and electrochemical activity. However, the problems of swelling, stability, high cost, and scalability need to be overcome. The synthesis methods for MXene and its composites with graphene oxide, carbon nanotubes, carbon nanofibers, and cellulose nanofibers, along with their structure, properties, and mechanisms for removing various pollutants from water, are described. This review discusses the synthesis methods, properties, and mechanisms of water purification using MXene and its composites. It also explores the fundamental aspects of MXene/carbon nanocomposites in various forms, such as membranes, aerogels, and textiles. A comparative analysis of the latest research on this topic shows the progress in this field and the limitations for the practical application of MXene/carbon nanocomposites to solve the problem of drinking water scarcity. Consequently, this review demonstrates the relevance and promise of the material and underscores the importance of further research and development of MXene/carbon nanocomposites to provide effective water treatment solutions. Full article