Search Results (102)

The discovery of the Higgs boson in 2012 at the Large Hadron Collider marked a major milestone in our understanding of electroweak symmetry breaking. Since then, increasingly precise measurements by the ATLAS and CMS Collaborations, based primarily on proton–proton collision data at $\sqrt{s}=13\mathrm{TeV}$ corresponding to about $140{\mathrm{fb}}^{-1}$ per experiment, have confirmed its compatibility with Standard Model predictions within current uncertainties. The Higgs boson mass is now measured with a precision of about 0.08%, while its couplings to fermions and bosons are determined at the 7–20% level. The completion of the LHC programme and the High-Luminosity LHC, will probe Higgs boson couplings at the few-percent level. However, sub-percent precision is required for stringent tests of the Standard Model, as any deviation would signal new physics beyond it. This strongly motivates future collider facilities, designed both as high-precision Higgs factories and, in many cases, as energy-frontier machines. Within the framework of the update of the European Strategy for Particle Physics, we discuss the physics case and main characteristics of the proposed particle collider options, highlighting their complementarity, technological challenges, and expected performance. The 2026 Strategy Update identifies the FCC-ee collider as the preferred next flagship project at CERN. Operating at the Z pole and at centre-of-mass energies between 240 and 365 GeV, it would enable model-independent, per-mille-level precision on Higgs boson couplings, while providing a pathway to a future high-energy hadron collider. The Higgs sector thus constitutes a central laboratory for precision tests of the Standard Model and for exploring the fundamental structure of our universe. Full article

This paper describes two front-end architectures developed in a 28 nm CMOS process for the readout of pixel detectors in future high-energy physics (HEP) colliders and advanced X-ray imaging instrumentation. The front-end channels have been developed in the framework of the PiHEX project, funded by the Italian Ministry of University and Research. PiHEX aims to improve the state of the art of pixel readout chip technology in high-luminosity colliders and X-ray imagers in the next generation of free electron lasers (FELs) by developing, in 28 nm CMOS technology, the fundamental microelectronic building blocks for pixel readout chips. Such blocks, also implementing innovative circuit ideas, will enable, in future applications, the integration of large-scale readout chips, meeting a set of challenging requirements, such as high spatial resolution, high signal-to-noise ratio, very wide dynamic range and the capability to withstand unprecedented radiation levels. Two different front-end channels were designed, integrated into two prototype chips, and tested. One architecture, featuring a pixel size of 25 µm × 100 µm, was optimized for tracking applications in high-energy physics experiments, like the ones that take place at CERN in the high-luminosity upgrade of the Large Hadron Collider (LHC), while the second one, featuring a pixel size of 110 µm × 55 µm, was devised for X-ray imaging applications in FELs. Full article

The Large Hadron Collider forward (LHCf) experiment studies the production of neutral particles in the very forward region of high-energy hadronic collisions at the LHC. These measurements provide essential calibration data for hadronic interaction models used in simulations of extensive air showers initiated by ultra-high-energy cosmic rays. The LHCf experiment measures forward-produced neutral particles, such as neutrons, photons, ${\pi }^0$, and $\eta$ mesons, which play a key role in the development of extensive air showers. Proton–proton collisions at the LHC reach center-of-mass energies up to 13.6 TeV, corresponding in the fixed-target frame to cosmic-ray interactions at energies close to 10¹⁷ eV in the Earth’s atmosphere. LHCf has collected data in proton–proton collisions at several energies, as well as in proton–lead collisions, enabling detailed comparisons between experimental results and predictions of hadronic interaction models. This contribution reviews the most significant LHCf results, with emphasis on Run II proton–proton data at $\sqrt{s}=13\mathrm{TeV}$, including measurements of forward neutron, photon, and $\eta$ meson production. Finally, future prospects are discussed, focusing on ongoing analyses of Run III proton–proton data at $\sqrt{s}=13.6\mathrm{TeV}$ and on the final LHCf operation in proton-oxygen collisions at $\sqrt{s_{NN}}=9.6\mathrm{TeV}$, which best reproduces cosmic-ray interactions with nuclei of the Earth’s atmosphere. Full article

The deployment of robotic systems in hazardous and magnetically intense environments requires careful assessment of their performance under external disturbances. In particular, electromagnetic motors used for actuation may interact with strong magnetic fields, potentially impairing their functionality. This study investigates the behaviour of miniature brushed coreless Direct Current (DC) motors for small Unmanned Aerial Vehicle (UAV) applications in magnetically harsh environments, such as underground accelerator facilities like the Large Hadron Collider (LHC) at CERN. Experimental tests were conducted measuring four main physical quantities: the torque components acting along the axes orthogonal to the shaft, the torque about the shaft axis, variations in angular speed, and electrical current consumption. The results showed that the motors were able to operate under external magnetic field intensities up to 0.4 T, although measurable torques acted on the internal permanent magnet and on the ferromagnetic housing material. Some discrepancies and speed fluctuations were observed during operation and were attributed to mobility of the internal permanent magnet. Overall, the findings demonstrate that the tested miniature motors exhibit resilience in high magnetic fields but suffer from manufacturing variability, suggesting that higher-quality motors with more consistent characteristics would be preferable for reliable robotic operation in harsh environments. Full article

Gluons within the proton may accumulate near a critical momentum due to nonlinear QCD effects, leading to a gluon condensation. Surprisingly, the pion distribution predicted by this gluon distribution could answer two puzzles in astronomy and high-energy physics. During ultra-high-energy cosmic ray collisions, gluon condensation may abruptly produce a large number of low-momentum pions, whose electromagnetic decays have the typical broken power law. On the other hand, the Large Hadron Collider (LHC) shows weak but recognizable signs of gluon condensation, which had been mistaken for BEC pions. Symmetry is one of the fundamental laws in natural phenomena. Conservation of energy stems from time symmetry, which is one of the most central principles in nature. In this study, we reveal that the connection between the above two apparently unrelated phenomena can be fundamentally explained from the fundamental principle of conservation of energy, highlighting the deep connection and unifying role symmetry plays in physical processes. Full article

Fourier transform-based frequency sweeping interferometry (FT-FSI) is an interferometric technique that enables absolute distance measurement by detecting the beat frequencies from the interference of reflected signals. This method allows robust, simultaneous distance measurements to multiple targets and is largely immune to variations in the reflected optical signal intensity. As a result, FT-FSI maintains accuracy even when measuring reflectors with low reflectance. FT-FSI has recently been integrated into the full remote alignment system (FRAS) developed for the High-Luminosity Large Hadron Collider (HL-LHC) project at CERN. Designed to operate in harsh environments with electromagnetic interference, ionizing radiation and cryogenic temperatures, FRAS employs FT-FSI for the precise monitoring of the alignment of accelerator components. The system includes specialized interferometers and a range of sensors, including inclinometers, distance sensors, and leveling sensors. This paper presents a comprehensive review of the challenges associated with remote measurement and monitoring systems in harsh environments such as those of particle accelerators. It details the development and validation of the FT-FSI-based measurement system, emphasizing its critical role in enabling micrometric alignment accuracy. The developments and results presented in this work can be readily translated to other demanding metrology applications in harsh environments. Full article

The ALICE (A Large Ion Collider Experiment) detector at the Large Hadron Collider (LHC), operated by the European Organization for Nuclear Research (CERN), is dedicated to heavy-ion collisions. Within ALICE, the application logs of the online computing systems are consolidated through a logging system known as Infologger, which integrates data from various sources. To identify potential anomalies, shifters in the control room manually review logs for anomalies, which require significant expertise and pose challenges due to the frequent onboarding of new personnel. To address this issue, we propose a real-time semi-supervised log anomaly detection framework designed to automatically detect anomalies in ALICE operations. The framework leverages BERTopic, a topic modeling technique, to provide real-time insights for incoming log messages for shifters. This includes an analytical dashboard that represents the anomaly status in log messages, facilitating informative monitoring for shifters. Through evaluation, including Infologger and BGL (BlueGene/L supercomputer), we analyze the effects of word embeddings, clustering algorithms, and HDBSCAN hyperparameters on model performance. The result demonstrates that the BERTopic can enhance the log anomaly detection process over traditional topic models, achieving remarkable performance metrics and attaining F1-scores of 0.957 and 0.958 for the InfoLogger and BGL datasets, respectively, even without the preprocessing technique. Full article

A web-based tool called ADFilter (short for Anomaly Detection Filter) was developed to process collision events using autoencoders based on a deep unsupervised neural network. The autoencoders are trained on a small fraction of either collision data or Standard Model (SM) Monte Carlo simulations. The tool calculates loss distributions for input events, helping to determine the degree to which the events can be considered anomalous with respect to the SM events used for training. Therefore, it can be used for new physics searches in collider experiments. Real-life examples are provided to demonstrate how the tool can be used to reinterpret existing results from the Large Hadron Collider (LHC), with the goal of significantly improving exclusion limits. This tool is expected to mitigate the “reproducibility crisis” associated with various machine learning techniques, as it can incorporate machine learning approaches from third-party publications, making them accessible to the general public. Full article

Searches for new particles beyond the Standard Model (SM) are an important task for the Large Hadron Collider (LHC). In this paper, we investigate the properties of the heavy non-SM Higgs bosons in the $\mu$-term extended Next-to-Minimal Supersymmetric Standard Model ($\mu$NMSSM). We scan the parameter space of the $\mu$NMSSM considering the basic constraints from Higgs data, dark matter (DM) relic density, and LHC searches for sparticles. And we also consider the constraints from the LZ2022 experiment and the muon anomaly constraint at the 2$\sigma$ level. We find that the LZ2022 experiment has a strict constraint on the parameter space of the $\mu$NMSSM, and the limits from the DM-nucleon spin-independent (SI) and spin-dependent (SD) cross-sections are complementary. Then, we discuss the exotic decay modes of heavy Higgs bosons decaying into SM-like Higgs bosons. We find that for doublet-dominated Higgs $h_3$ and $A_2$, the main exotic decay channels are $h_3\to Z{A}_1$, $h_3\to h_1{h}_2$, $A_2\to A_1{h}_1$, and $A_2\to Z{h}_2$, and the branching ratio can reach to about 23%, 10%, 35%, and 10% respectively. Full article

The possibility to search for long-lived axion-like particles (ALPs) decaying into photons is investigated in ultraperipheral PbPb collisions at the Large Hadron Collider (LHC). We propose a search strategy for low-mass ALPs using the LHCb and ALICE experiments. The ALP identification is performed by requiring the decay vertex be reconstructed outside the region where a primary vertex is expected, which strongly suppress the contribution associated with the decay of light mesons. We also use the fact that a fraction of the photons convert into electron–positron pairs, allowing the reconstruction of the particle decay position. We present the predictions for the pseudorapidity and transverse momentum distributions of the ALPs and photons. Moreover, predictions for the fiducial cross-sections, derived considering the characteristics of the ALICE and LHCb detectors, are presented for different values of the ALP mass and the ALP—photon coupling. Full article

Multiphase DC/DC power converter architectures have recently been investigated for powering the superconducting electromagnets in the High-Luminosity (HL) upgrade of the Large Hadron Collider (LHC) at CERN, targeting high-performance figures and reliability. In terms of control, a master–slave voltage/current regulation configuration was previously proposed by the authors as an alternative to other well-known cascaded options. In this work, fault-tolerant features (i.e., diagnosis and reconfiguration under open-circuit switch faults) are incorporated into the aforementioned proposal. These features are highly desirable, as physics experiments—which can last for several hours—should not be interrupted in the event of a recoverable fault in the powering system. Simulation and experimental results are provided, demonstrating the correctness of the proposed fault-tolerant scheme. Full article

The general-purpose Compact Muon Solenoid (CMS) detector at the Large Hadron Collider (LHC) at CERN is used to study the production of new particles in proton–proton collisions at an LHC center of mass energy of 13.6 TeV. The detector includes a magnet based on a 6 m diameter superconducting solenoid coil operating at a current of 18.164 kA. This current creates a central magnetic flux density of 3.8 T that allows for the high-precision measurement of the momenta of the produced charged particles using tracking and muon subdetectors. The CMS magnet contains a 10,000 ton flux-return yoke of dodecagonal shape made from the assembly of construction steel blocks distributed in several layers. These steel blocks are magnetized with the solenoid returned magnetic flux and wrap the muons escaping the hadronic calorimeters of total absorption. To reconstruct the muon trajectories, and thus to measure the muon momenta, the drift tube and cathode strip chambers are located between the layers of the steel blocks. To describe the distribution of the magnetic flux in the magnet yoke layers, a three-dimensional computer model of the CMS magnet is used. To validate the calculations, special measurements are performed, with the flux loops wound in 22 cross-sections of the flux-return yoke blocks. The measured voltages induced in the flux loops during the CMS magnet ramp-ups and -downs, as well as during the superconducting coil fast discharges, are integrated over time to obtain the initial magnetic flux densities in the flux loop cross-sections. The measurements obtained during the seven standard ramp-downs of the magnet were analyzed in 2018. From that time, three fast discharges occurred during the standard ramp-downs of the magnet. This allows us to single out the contributions of the eddy currents, induced in steel, to the flux loop voltages registered during the fast discharges of the coil. Accounting for these contributions to the flux loop measurements during intentionally triggered fast discharges in 2006 allows us to perform the validation of the CMS magnet computer model with better precision. The technique for the flux loop measurements and the obtained results are presented and discussed. The method for measuring magnetic flux density in steel blocks described in this study is innovative. The experience of 3D modeling and measuring the magnetic field in steel blocks of the magnet yoke, as part of a muon detector system, has good prospects for use in the construction and operation of particle detectors for the Future Circular Electron–Positron Collider and the Circular Electron–Positron Collider. Full article

Low-Gain Avalanche Diodes (LGADs) are critical sensors for the ATLAS and CMS timing detectors at the High Luminosity Large Hadron Collider (HL-LHC), offering enhanced timing resolution with gain factors of 20 to 50. However, their radiation tolerance is hindered by the Acceptor Removal Phenomenon (ARP), which deactivates boron in the gain layer, reducing gain below the threshold for accurate timing. This study investigates the radiation hardness of thin, carbon-doped LGAD sensors developed by Brookhaven National Laboratory (BNL) to address ARP-induced limitations. Active dopant profiles in the gain layer, junction, and bulk were measured using a Spreading Resistance Probe (SRP) profilometer, and the effects of annealing and neutron irradiation at fluences of 3 × 10¹⁴, 1 × 10¹⁵, and 3 × 10¹⁵ neq/cm² (1 MeV equivalent) were analyzed. Low carbon dose rates showed minimal improvement due to enhanced deactivation, while higher doses improved radiation hardness, demonstrating a non-linear dose–response relationship. These findings highlight the potential of optimizing gain layers with high carbon doses and low-diffusion boron to extend LGAD lifetimes in high-radiation environments. Future research will refine carbon implantation strategies and explore alternative approaches to further enhance the radiation hardness of LGADs. Full article

In this paper, we estimate the number of event topologies that have the potential to be produced in $pp$ collisions at the Large Hadron Collider (LHC) without violating kinematic and other constraints. We use numerical calculations and combinatorics, guided by large-scale Monte Carlo simulations of Standard Model (SM) processes. Then, we set the upper limit on the probability that new physics may escape detection, assuming a model-agnostic approach. The calculated probability is unexpectedly large, and the fact that LHC has not found new physics until now is not entirely surprising. Theoretical limitations and experimental challenges in observing new physics within the studied exclusive event classes are examined. Full article

Kaijū media frequently features dangerous scientific experiments as a central theme, invented by scientists who are falsely convinced that they both completely understand and control their advanced technology. In the past few decades, this has included the introduction of high-energy physics (HEP) experiments—especially mammoth particle accelerators—that, among other destructive results, allow for the entrance of equally large and dangerous creatures into our world from parallel dimensions. Public concerns voiced about the safety of the creation of two groundbreaking energy accelerators—the Relativistic Heavy Ion Collider (RHIC) in New York and the Large Hadron Collider (LHC) in Europe—in the early 21st century are tied to related science fiction media that capitalize on such fears (including Godzilla vs. Megaguirus [2000], Pacific Rim [2013], The Cloverfield Paradox [2018], The Kaiju Preservation Society [2022]). Particular attention is paid to the Netflix original series Stranger Things (2016–) as a detailed case study. This study concludes with an analysis of scientists’ attempts to embrace the popularity of Stranger Things in their communication with the general public, and suggests that ongoing issues with conspiracy theories have been fueled in part by such attempts, coupled with long-standing issues with the HEP community and their peculiar scientific naming conventions. Full article