Search Results (448)

Snow water equivalent (SWE) can be estimated using Differential SAR Interferometry (DInSAR), which captures changes in snow depth and density between two SAR acquisitions. However, challenges arise due to SAR signal penetration into the snowpack and the intrinsic limitations of DInSAR measurements. This study addresses these issues and explores the use of multi-band SAR data to derive SWE maps in alpine regions characterized by steep terrain, small spatial extent, and a potentially heterogeneous snowpack. We first conducted a performance analysis to assess SWE estimation precision and the maximum unambiguous SWE variation, considering incidence angle, wavelength, and coherence. Based on these results, we selected C-band Sentinel-1 and L-band SAOCOM data acquired over alpine areas and applied tailored DInSAR processing. Atmospheric artifacts were corrected using zenith total delay maps from the GACOS service. Additionally, sensitivity maps were generated for each interferometric pair to identify pixels suitable for reliable SWE estimation. A comparative analysis of the C- and L-band results revealed several critical issues, including significant atmospheric artifacts, phase decorrelation, and phase unwrapping errors, which impact SWE retrieval accuracy. A comparison between our Sentinel-1-based SWE estimations and independent measurements over an instrumented site shows results fairly in line with previous works exploiting C-band data, with an RSME in the order of a few tens of mm. Full article

Validating the potential of multi-frequency synthetic aperture radar (SAR) data for multi-layer and profile soil moisture (SM) estimation modeling, we conducted an airborne multi-frequency SAR joint observation experiment (AMFSEX) over the Liao River Basin in China. The experiment simultaneously acquired airborne high spatial resolution quad-polarization (quad-pol) SAR data at five frequencies, including the Ka-, X-, C-, S-, and L-band. A preliminary “vegetation–soil” parameter estimation model based on the multi-frequency SAR data was established. Theoretical penetration depths of the multi-frequency SAR data were analyzed using the Dobson empirical model and the Hallikainen modified model. On this basis, a water cloud model (WCM) constrained by multi-polarization weighted and penetration depth weighted parameters was used to analyze the estimation accuracy of the multi-layer and profile SM (0–50 cm depth) under different vegetation types (grassland, farmland, and woodland). Overall, the estimation error (root mean square error, RMSE) of the surface SM (0–5 cm depth) ranged from 0.058 cm³/cm³ to 0.079 cm³/cm³, and increased with radar frequency. For multi-layer and profile SM (3 cm, 5 cm, 10 cm, 20 cm, 30 cm, 40 cm, 50 cm depth), the RMSE ranged from 0.040 cm³/cm³ to 0.069 cm³/cm³. Finally, a multi-input multi-output regression model (Gaussian process regression) was used to simultaneously estimate the multi-layer and profile SM. For surface SM, the overall RMSE was approximately 0.040 cm³/cm³. For multi-layer and profile SM, the overall RMSE ranged from 0.031 cm³/cm³ to 0.064 cm³/cm³. The estimation accuracy achieved by coupling the multi-source data (multi-frequency SAR data, multispectral data, and soil parameters) was superior to that obtained using the SAR data alone. The optimal SM penetration depth varied across different vegetation cover types, generally falling within the range of 10–30 cm, which holds true for both the scattering model and the regression model. This study provides methodological guidance for the development of multi-layer and profile SM estimation models based on the multi-frequency SAR data. Full article

Machine learning (ML) has gained significant attention for unraveling the complex, nonlinear relationships between soil moisture (SM) and various predictive variables, including remote sensing (RS; reflectance, brightness temperature, backscatter coefficients) and biophysical (topographic, soil, vegetation, and weather) variables. We reviewed the literature to extract and synthesize ML algorithms, reliable input features, and challenges in SM estimation using RS data. We analyzed results from 144 articles published from 2010 to 2024. Random forest (40 out of 67 studies), support vector regressor (13 out of 39 studies), and artificial neural networks (12 out of 27 studies) often outperformed other algorithms to estimate SM using RS datasets. Multi-source RS data often outperformed single-source data in SM estimation. Satellite-derived features, such as vegetation indices and backscattering coefficients, provided critical information on surface SM (SSM) variability to estimate SSM. For root zone SM estimation, soil properties and SSM generally were more reliable predictors than surface information derived solely from RS. Two recent advances—the use of semi-empirical models and L-band SAR to mitigate vegetation effects, and transfer learning to improve model transferability—have shown promise in addressing key challenges in SM estimation. Full article

The southwestern mountainous region of China (SMRC), characterized by complex geological environments, experiences frequent landslide disasters that pose significant threats to local residents. This study focuses on the Qijiang District of Chongqing, where we conduct a systematic evaluation of wavelength and observation geometry effects on InSAR-based landslide monitoring. Utilizing multi-sensor SAR imagery (Sentinel-1 C-band, ALOS-2 L-band, and LUTAN-1 L-band) acquired between 2018 and 2025, we integrate time-series InSAR analysis with geological records, high-resolution topographic data, and field investigation findings to assess representative landslide-susceptible zones in the Qijiang District. The results indicate the following: (1) L-band SAR data demonstrates superior monitoring precision compared to C-band SAR data in the SMRC; (2) the combined use of LUTAN-1 ascending/descending orbits significantly improved spatial accuracy and detection completeness in complex landscapes; (3) multi-source data fusion effectively mitigated limitations of single SAR systems, enhancing identification of small- to medium-scale landslides. This study provides critical technical support for multi-source landslide monitoring and early warning systems in Southwest China while demonstrating the applicability of China’s SAR satellites for geohazard applications. Full article

Tropical forests harbor a significant portion of global biodiversity but are increasingly degraded by human activity. Assessing restoration efforts requires the systematic monitoring of tropical ecosystem status and recovery. Satellite-borne synthetic aperture radar (SAR) supports monitoring changes in vegetation structure and is of particular utility in tropical regions where clouds obscure optical satellite observations. To characterize tropical forest recovery in the Lowland Chocó Biodiversity Hotspot of Ecuador, we apply over a decade of dual-polarized (HH + HV) L-band SAR datasets from the Japanese Space Agency’s (JAXA) PALSAR and PALSAR-2 sensors. We assess the complementarity of the dual-polarized imagery with less frequently available fully-polarimetric imagery, particularly in the context of their respective temporal and informational trade-offs. We examine the radar image texture associated with the dual-pol radar vegetation index (DpRVI) to assess the associated determination of forest and nonforest areas in a topographically complex region, and we examine the equivalent performance of texture measures derived from the Freeman–Durden polarimetric radar decomposition classification scheme applied to the fully polarimetric data. The results demonstrate that employing a dual-polarimetric decomposition classification scheme and subsequently deriving the associated gray-level co-occurrence matrix mean from the DpRVI substantially improved the classification accuracy (from 88.2% to 97.2%). Through this workflow, we develop a new metric, the Radar Forest Regeneration Index (RFRI), and apply it to describe a chronosequence of a tropical forest recovering from naturally regenerating pasture and cacao plots. Our findings from the Lowland Chocó region are particularly relevant to the upcoming NASA-ISRO NISAR mission, which will enable the comprehensive characterization of vegetation structural parameters and significantly enhance the monitoring of biodiversity conservation efforts in tropical forest ecosystems. Full article

This paper presents a novel dual-band flexible antenna, uniquely designed and extended to array as well as MIMO configurations for the Sub-6 GHz band. The single-element monopole antenna features a modified rectangular radiator with two L-strips and a reduced ground plane, enabling a compact dual-band response. The proposed four-element, two-port MIMO configuration is extended from the 1 × 2 array antenna, achieving an overall dimension of 57 × 50 × 0.1 mm³, making it exceptionally compact and flexible compared to existing rigid and bulkier designs. Operating in the 3.6–3.8 GHz and 5.65–5.95 GHz bands, the antenna delivers a high gain of 5.2 dBi and 7.7 dBi, outperforming many designs in terms of gain while maintaining the superior isolation of >22 dB utilizing a defected ground structure (DGS). The design satisfies key MIMO diversity metrics (ECC < 0.05, DG > 9.99) and demonstrates low SAR values (0.0702/0.25 W/kg at 3.75 GHz and 0.175/0.507 W/kg at 5.9 GHz), making it highly suitable for wearable and on-body communication, unlike many rigid counterparts. Fabricated on a flexible polyimide substrate, the antenna addresses challenges such as size, bandwidth, isolation, and safety in MIMO antenna design. The performance, validated through fabrication and measurement, establishes the proposed antenna as a superior alternative to existing MIMO designs for compact, high-performance Sub-6 GHz 5G applications. Full article

Forest age is a key factor in determining the carbon sequestration capacity and trends of forests. Based on the Google Earth Engine platform and using the topographically complex and climatically diverse Southeastern Tibet as the study area, we propose a new method for forest age estimation that integrates multi-source remote-sensing data with machine learning. The study employs the Continuous Degradation Detection (CODED) algorithm combined with spectral unmixing models and Normalized Difference Fraction Index (NDFI) time series analysis to update forest disturbance information and provide annual forest distribution, mapping young forest distribution. For undisturbed forests, we compared 12 machine-learning models and selected the Random Forest model for age prediction. The input variables include multiscale satellite spectral bands (Sentinel-2 MSI, Landsat series, PROBA-V, MOD09A1), vegetation parameter products (canopy height, productivity), data from the Global Ecosystem Dynamics Investigation (GEDI), multi-band SAR data (C/L), vegetation indices (e.g., NDVI, LAI, FPAR), and environmental factors (climate seasonality, topography). The results indicate that the forests in Southeastern Tibet are predominantly overmature (>120 years), accounting for 87% of the total forest cover, while mature (80–120 years), sub-mature (60–80 years), intermediate-aged (40–60 years), and young forests (< 40 years) represent relatively lower proportions at 9%, 1%, 2%, and 1%, respectively. Forest age exhibits a moderate positive correlation with stem biomass (r = 0.54) and leaf-area index (r = 0.53), but weakly negatively correlated with L-band radar backscatter (HV polarization, r = −0.18). Significant differences in reflectance among different age groups are observed in the 500–1000 nm spectral band, with 100 m resolution PROBA-V data being the most suitable for age prediction. The Random Forest model achieved an overall accuracy of 62% on the independent validation set, with canopy height, L-band radar data, and temperature seasonality being the most important predictors. Compared with 11 other machine-learning models, the Random Forest model demonstrated higher accuracy and stability in estimating forest age under complex terrain and cloudy conditions. This study provides an expandable technical framework for forest age estimation in complex terrain areas, which is of significant scientific and practical value for sustainable forest resource management and global forest resource monitoring. Full article

Existing forest height estimation methods based on polarimetric interferometric synthetic aperture radar (PolInSAR) typically process each pixel independently, potentially introducing inconsistent estimates and additional decorrelation in the covariance matrix estimation. To address these limitations and effectively exploit the spatial context information, this paper proposes the first patch-based inversion method named joint pixel optimization inversion (JPO). By leveraging the smoothness and regularity of homogeneous pixels, a joint-pixel optimization problem is constructed, incorporating a first-order regularization on the ground phase. To solve the non-parallelizable problem of the alternating direction method of multipliers (ADMM), we devise a new parallelizable ADMM algorithm and prove its sublinear convergence. With the contextual information of neighboring pixels, JPO can provide more reliable forest height estimation and reduce the overestimation caused by additional decorrelation. The effectiveness of the proposed method is verified using spaceborne L-band repeat-pass SAOCOM acquisitions and LiDAR heights obtained from ICESat-2. Quantitative evaluations in forest height estimation show that the proposed method achieves a lower mean error (1.23 m) and RMSE (3.67 m) than the existing method (mean error: 3.09 m; RMSE: 4.70 m), demonstrating its improved reliability. Full article

Forested wetlands in temperate mountain ecosystems play a critical role in carbon sequestration and biodiversity maintenance, yet their accurate delineation remains challenging due to spectral similarity with forests and anthropogenic interference. Here, we present an optimized two-stage Random Forest framework integrating 2019–2022 growing season datasets from Sentinel-1 C-SAR, ALOS-2 L-PALSAR, Sentinel-2 MSI, and Landsat-8 TIRS with environmental covariates. The methodology first applied NDBI thresholding (NDBI > 0.12) to exclude 94% of urban/agricultural areas through spectral masking, then implemented an optimized Random Forest classifier (ntree = 1200, mtry = 28) with 10-fold cross-validation, leveraging 42 features including L-band HV backscatter (feature importance = 47), Sentinel-2 SWIR (Band12; importance = 57), and land surface temperature gradients. This study pioneers a 10 m resolution forest swamp map in the Changbai Mountain wetlands, achieving 87.18% overall accuracy (Kappa = 0.84) with strong predictive performance (AUC = 0.89). Forest swamps showed robust classification metrics (PA = 80.37%, UA = 86.87%), driven by L-band SAR’s superior discriminative power (p < 0.05). Quantitative assessment demonstrated that L-band SAR increased classification accuracy in canopy penetration scenarios by 4.2% compared to optical-only approaches, while thermal-IR features reduced confusion with forests. Forested swamps occupied 229.95 km² (9% of protected areas), predominantly in transitional ecotones (720–850 m elevation) between herbaceous wetlands and forest. This study establishes that multi-sensor fusion enables operational wetland monitoring in topographically complex regions, providing a transferable framework for temperate mountain ecosystems. The dataset advances precision conservation strategies for these climate-sensitive habitats, supporting sustainable development goals targets for wetland protection through enhanced machine learning interpretability and anthropogenic interference mitigation. Full article

Accurately monitoring forest canopy height is crucial for sustainable forest management, particularly in southeastern North Carolina, USA, where dense forests and limited accessibility pose substantial challenges. This study presents an explainable machine learning framework that integrates sparse GEDI LiDAR samples with multi-sensor remote sensing data to improve both the accuracy and interpretability of forest canopy height estimation. This framework incorporates multitemporal optical observations from Sentinel-2; C-band backscatter and InSAR coherence from Sentinel-1; quad-polarization L-Band backscatter and polarimetric decompositions from the Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR); texture features from the National Agriculture Imagery Program (NAIP) aerial photography; and topographic data derived from an airborne LiDAR-based digital elevation model. We evaluated four machine learning algorithms, K-nearest neighbors (KNN), random forest (RF), support vector machine (SVM), and eXtreme gradient boosting (XGB), and found consistent accuracy across all models. Our evaluation highlights our method’s robustness, evidenced by closely matched R² and RMSE values across models: KNN (R² of 0.496, RMSE of 5.13 m), RF (R² of 0.510, RMSE of 5.06 m), SVM (R² of 0.544, RMSE of 4.88 m), and XGB (R² of 0.548, RMSE of 4.85 m). The integration of comprehensive feature sets, as opposed to subsets, yielded better results, underscoring the value of using multisource remotely sensed data. Crucially, SHapley Additive exPlanations (SHAP) revealed the multi-seasonal red-edge spectral bands of Sentinel-2 as dominant predictors across models, while volume scattering from UAVSAR emerged as a key driver in tree-based algorithms. This study underscores the complementary nature of multi-sensor data and highlights the interpretability of our models. By offering spatially continuous, high-quality canopy height estimates, this cost-effective, data-driven approach advances large-scale forest management and environmental monitoring, paving the way for improved decision-making and conservation strategies. Full article

Deep learning has shown significant potential in multi-band Polarimetric Synthetic Aperture Radar (PolSAR) land cover classification. However, the existing methods face two main challenges: accurately modeling the complex nonlinear relationships between multiple bands and balancing classifier parameter efficiency with classification accuracy. To address these challenges, this paper proposes a novel decision-level multi-band fusion framework that leverages the synergistic optimization of the Vision Transformer (ViT) and Kolmogorov–Arnold Network (KAN). This innovative architecture effectively captures global spatial–spectral correlations through ViT’s cross-band self-attention mechanism and achieves parameter-efficient decision-level probability space mapping using KAN’s spline basis functions. The proposed method significantly enhances the model’s generalization capability across different band combinations. The experimental results on the quad-band (P/L/C/X) Hainan PolSAR dataset, acquired by the Aerial Remote Sensing System of the Chinese Academy of Sciences, show that the proposed framework achieves an overall accuracy of 96.24%, outperforming conventional methods in both accuracy and parameter efficiency. These results demonstrate the practical potential of the proposed method for high-performance and efficient multi-band PolSAR land cover classification. Full article

Based on Digital Beamforming (DBF) technology, spaceborne SAR systems can achieve high-resolution and wide-swath (HRWS) imaging. When combined with reflector antennas, the DBF-SCORE (Digital Beamforming-SCan On REceive) system also features light weight and low cost, making it an important choice for spaceborne HRWS SAR. This paper firstly proposes an advanced Full-chain Real-time Internal Calibration (FRIC) scheme, where the calibration path covers the entire receive chain from the antenna feed port to the input port of the Analog-to-Digital Converter (ADC) and achieves high-precision internal calibration concurrently with data acquisition. Secondly, based on the L-band reflector antenna DBF-SCORE system architecture, the design of radio frequency (RF) front end, namely the Transmit-Receive-Calibration Module (TRCM), is carried out. We propose the implementation of azimuth encoding modulation of the calibration signal through periodic switch control within the TRCM. Subsequently, the calibration signal is extracted using waveform diversity technology and its Signal-to-Noise Ratio (SNR) is improved through azimuth coherent integration technology. In addition, a ground verification system is established using the TRCM to evaluate the comprehensive performance of transmitting, receiving, and real-time internal calibration. Experimental results verify the effectiveness of the FRIC scheme and provide valuable insights for future spaceborne DBF SAR systems. Full article

Water pipeline leak detection in a fast and accurate way is of much importance for water utility companies and the general public. At present, the rapid development of remote sensing and computer technologies makes it possible to detect water pipeline leaks on a large scale efficiently and timely. The leakage will cause an increase in the water content and dielectric constant of the soil around the pipeline, so it is feasible to determine the leakage site by measuring the subsurface soil relative dielectric constant (SSRDC). In this paper, we combine the SAOCOM-1A L-band synthetic-aperture radar (SAR) and the ground-penetrating radar (GPR) data to develop regression models that predict the SSRDC values. The model features are selected with the Boruta wrapper algorithm based on the SAOCOM-1A images after pre-processing, and the SSRDC values at sampling locations within the research area are calculated with the reflected wave method based on the GPR data. We evaluate multiple linear regression (MLR), random forest (RF), and multi-layer perceptron neural network (MLPNN) models for their ability to predict the SSRDC values using the selected features. The experimental results show that the MLPNN model ($R^2$ = 0.705, RMSE = 1.936, MAE = 1.664) can better estimate the SSRDC values. Further, in the main urban area of Tianjin, China, which has a large water pipeline system, the SSDRC values of the area are obtained with the best model, and the locations where the predicted SSDRC values exceeded a certain threshold were considered potential leak locations. The empirical results indicate an encouraging potential of the proposed method to locate the pipeline leaks. This will provide a new avenue for the monitoring and treatment of water pipeline leaks. Full article

The sparse imaging network of synthetic aperture radar (SAR) is usually designed end to end and has a limited adaptability to radar systems of different bands. Meanwhile, the implementation of the sparse imaging algorithm depends on the sparsity of the target scene and usually adopts a fixed $L_1$ regularization solution, which has a mediocre reconstruction effect on complex scenes. In this paper, a novel SAR imaging deep unfolding network based on approximate observation is proposed for multi-band SAR systems. Firstly, the approximate observation module is separated from the optimal solution network model and selected according to the multi-band radar echo. Secondly, to realize the SAR imaging of non-sparse scenes, $L_p$ regularization is used to constrain the uncertain transform domain of the target scene. The adaptive optimization of $L_p$ parameters is realized by using a data-driven approach. Furthermore, considering that phase errors may be introduced in the real SAR system during echo acquisition, an error estimation module is added to the network to estimate and compensate for the phase errors. Finally, the results from both simulated and real data experiments demonstrate that the proposed method exhibits outstanding performance under 0.22 THz and 9.6 GHz echo data: high-resolution SAR focused images are achieved under four different sparsity conditions of 20%, 40%, 60%, and 80%. These results fully validate the strong adaptability and robustness of the proposed method to diverse SAR system configurations and complex target scenarios. Full article

Spaceborne Synthetic Aperture Radar (SAR) is extensively used in maritime surveillance due to its ability to monitor vast oceanic regions regardless of weather conditions and sun illumination. Over the years, numerous automatic ship detection algorithms have been developed, utilizing either single-polarimetric data (i.e., intensity) or leveraging additional information provided by polarimetric sensors. One of the main challenges in automatic ship detection using SAR is that sea clutter, influenced primarily by sea conditions and image acquisition angles, can exhibit strong backscatter, reducing the signal-to-clutter ratio (that is, the contrast) between ships and their surroundings. This leads inevitably to detection errors, which can be either false alarms or miss-detections. A potential solution to this issue is to develop methodologies that suppress backscattered signals from the sea while preserving the radar returns from ships. In this work, we analyse a contrast enhancement method which is designed to suppress unwanted sea clutter while preserving signals from potential ships. A key advantage of this method is that it is fully analytical, eliminating the need for numerical optimization and enabling the rapid generation of an enhanced image better suited for automatic detection. This technique, based on polarimetric orthogonality, was originally formulated for quad-polarimetric data, and here the adaptation for dual-polarimetric SAR images is also detailed. To demonstrate its effectiveness, a comprehensive set of results using both quad- and dual-polarimetric images acquired by various sensors operating at L-, C-, and X-band is presented. Full article