Search Results (15)

This paper introduces arguments in favor of the intensive use of standards in both teaching the Machine Elements discipline and solving the first projects of mechanical design (gearboxes, jacks, pumps, tanks, etc.). The paper presents a SWOTT approach to the use of new in-force standards in teaching the design of machine elements. The use of information from standards in courses and design handbooks is regulated by various standardization associations at different levels internationally, such as the ISO (International Organization of Standardization), IEC (International Electrotechnical Commission), and ITU (International Telecommunication), and regional associations such as the CEN (European Commission for Standardization), CENELEC (European Committee for Electrotechnical Standardization) and ETSI (European Telecommunications Standards Institute), and national associations (for instance, the ASRO—Association of Standardization of Romania). In general, the conditions for using partial information from standards vary, but the authors present common lines and recommendations for introducing information from standards in books and design handbooks for engineering students. The use of information from standards for terms, materials, calculation models, test methods etc. is beneficial for students. This will provide them a good professional education towards adapting to a specific job in the field of mechanical engineering, where conformity to norms and standards is required by the dynamics of production, product quality and, not least, the safety of machines and operators. Full article

Background/Objectives: Health and social care systems around the globe are currently undergoing a transformation towards personalized, preventive, predictive, participative precision medicine (5PM), considering the individual health status, conditions, genetic and genomic dispositions, etc., in personal, social, occupational, environmental, and behavioral contexts. This transformation is strongly supported by technologies such as micro- and nanotechnologies, advanced computing, artificial intelligence, edge computing, etc. Methods: To enable communication and cooperation between actors from different domains using different methodologies, languages, and ontologies based on different education, experiences, etc., we have to understand the transformed health ecosystem and all its components in terms of structure, function and relationships in the necessary detail, ranging from elementary particles up to the universe. In this way, we advance design and management of the complex and highly dynamic ecosystem from data to knowledge level. The challenge is the consistent, correct, and formalized representation of the transformed health ecosystem from the perspectives of all domains involved, representing and managing them based on related ontologies. The resulting business viewpoint of the real-world ecosystem must be interrelated using the ISO/IEC 21838 Top Level Ontologies standard. Thereafter, the outcome can be transformed into implementable solutions using the ISO/IEC 10746 Open Distributed Processing Reference Model. Results: The model and framework for this system-oriented, architecture-centric, ontology-based, policy-driven approach have been developed by the first author and meanwhile standardized as ISO 23903 Interoperability and Integration Reference Architecture. The formal representation of any ecosystem and its development process including examples of practical deployment of the approach, are presented in detail. This includes correct systems and standards integration and interoperability solutions. A special issue newly addressed in the paper is the correct and consistent formal representation Conclusions: of all components in the development process, enabling interoperability between and integration of any existing representational artifacts such as models, work products, as well as used terminologies and ontologies. The provided solution is meanwhile mandatory at ISOTC215, CEN/TC251 and many other standards developing organization in health informatics for all projects covering more than just one domain. Full article

The adequacy of the indoor environmental quality (IEQ) in mass transit microenvironments is crucial to the well-being of exposed commuters. By 2050, many developing tropical countries will host even more megacities, which will feature an increase in people mobility and higher occupancy density. The paucity of IEQ studies, the technology gap, and inadequate policy measures to assure safer and sustainable mobility in many developing tropics have reinforced the current study objective. Also, the recent COVID-19 pandemic has highlighted the IEQ links and risks to health in transport, which, given the climate peculiarities, transport reforms, and huge commuter traffic in Nigeria, inform the study motivation. The indoor air quality (CO₂, PM, VOCs, NO₂), thermal, acoustic, and visual environments were objectively assessed in train passenger cabins and waiting areas, during 15 trips in the dry and rainy seasons in Nigeria. The results were analyzed by following the IEQ requirements defined in the ISO, CEN, ASHRAE, and SAE standards. The results indicate gaps in the IAQ (inadequate ventilation in 9 trains), defective thermal comfort (9 trains), exceedance in the PM limit (PM₁₀: 47.9–115 μg/m³, PM_2.5: 22.5–51.3 μg/m³), noise (L_eq range: 64–85 dBA), and low illuminance levels (10 trains), hence the need for IEQ, interventions, stakeholder awareness, and broader IEQ studies on transport cabins in these regions. Full article

Rice cultivation stands as the primary agricultural activity in Asia, generating a substantial amount of agricultural waste. Unfortunately, this waste is often disposed of through burning, contributing to severe environmental, health and climate issues. This study presents the characterization of PCDD/Fs, PCBs and PAHs. The emissions were quantified using a fixed-grid-system biomass plant and measuring the macro-pollutants online and sampling the organic micro-pollutants and metals in isokinetic mode, followed by ISO and CEN standards methods. Additionally, the role of agrochemicals was monitored in terms of metal catalysis resulting in POP emissions. This study provides the comprehensive characterization of the most relevant groups of pollutants (metals, PCDD/Fs, PCBs and PAHs) resulting from agricultural waste combustion. Prominent catalytic metals quantified were Cu (22–48 µg/Nm³) and Fe (78–113 µg/Nm³). Rice straw samples from AJK exhibited higher values of organochlorine micro-pollutants compared to those from Punjab and Sindh, i.e., ∑PCDD/F (2594 > 1493 > 856 pg/Nm³) and ∑PCB (41 > 38 > 30 pg/Nm³), respectively, whereas the organic micro-pollutants ∑c-PAH, indicators of incomplete combustion (PICs), were recorded high in the samples from Sindh followed by Punjab and AJK. The average EF is 100 pg/kg, 2.2 pg/kg and 1053.6 µg/kg for ∑PCDD/F, ∑PCB and ∑c-PAH. This study supports the idea that the phenomena leading to the formation of dioxin and dioxin-like compounds are influenced not only by poor combustion but also by the presence of metal catalysts in the burned fuel. Full article

The advancement of sciences and technologies, economic challenges, increasing expectations, and consumerism result in a radical transformation of health and social care around the globe, characterized by foundational organizational, methodological, and technological paradigm changes. The transformation of the health and social care ecosystems aims at ubiquitously providing personalized, preventive, predictive, participative precision (5P) medicine, considering and understanding the individual’s health status in a comprehensive context from the elementary particle up to society. For designing and implementing such advanced ecosystems, an understanding and correct representation of the structure, function, and relations of their components is inevitable, thereby including the perspectives, principles, and methodologies of all included disciplines. To guarantee consistent and conformant processes and outcomes, the specifications and principles must be based on international standards. A core standard for representing transformed health ecosystems and managing the integration and interoperability of systems, components, specifications, and artifacts is ISO 23903:2021, therefore playing a central role in this publication. Consequently, ISO/TC 215 and CEN/TC 251, both representing the international standardization on health informatics, declared the deployment of ISO 23903:2021 mandatory for all their projects and standards addressing more than one domain. The paper summarizes and concludes the first author’s leading engagement in the evolution of pHealth in Europe and beyond over the last 15 years, discussing the concepts, principles, and standards for designing, implementing, and managing 5P medicine ecosystems. It not only introduces the theoretical foundations of the approach but also exemplifies its deployment in practical projects and solutions regarding interoperability and integration in multi-domain ecosystems. The presented approach enables comprehensive and consistent integration of and interoperability between domains, systems, related actors, specifications, standards, and solutions. That way, it should help overcome the problems and limitations of data-centric approaches, which still dominate projects and products nowadays, and replace them with knowledge-centric, comprehensive, and consistent ones. Full article

Renewable active sludge is a smart material for wastewater treatment and the protection of surface water bodies. The generated pellets (dried and pelletised dehydrated anaerobically stabilised excess sludge) are produced in a quantity of 31.4 ± 5.6 g dry matter (DM) per one Population equivalent (PE) calculated to COD (PE_COD) in one day. As pellets are combustible material, their energy utilisation must reach the sustainable development goals (SDGs)—a bridge must be created between “treated sewage sludge as the tool to remove pollutants and nutrients from wastewater” and “preparation of the valuable material as a solid recovered fuel (SRF) that meets customer-specific requirements”. Technical Report CEN/TR 15508 and Technical Standard EN ISO 21640 set up methods for specifying and classifying pellets as an SRF. In the last eleven years (2010–2021), pellets’ net calorific value (NCV) is 13.0 ± 0.7 MJ kg⁻¹ as received (ar). In 2021, the 80th percentile of the Hg/NCV ratio was 0.079 mg Hg MJ⁻¹. In 2010–2021, the annual amount of Hg transferred to stakeholders reduced by 64.3% m/m—from 10.1 kg to 3.67 kg. The halogen contents of the pellets do not threaten corrosion to the incineration facility. Stable pellets’ energy potential and perspective ash composition for critical raw materials recovery qualify pellets as a specific waste stream and a renewable material for SRF production. Full article

Agricultural activities lead to the production of large quantities of pruning and residual biomass, the correct disposal of which is a topic of great interest. Unfortunately, although it is an environmentally unacceptable practice, disposal often takes place with uncontrolled combustion in field (open burning). Disposal using biomass boilers produces energy from controlled combustion and the use of abatement systems reduces emissions that are inevitably generated in the combustion processes of solid fuel (CO, CO₂, NOx, SO₂, PM, etc.). Among the pollutants produced in combustion processes, Persistent Organic Pollutants (POPs) are one of the most relevant groups of chemicals that must be monitored for their effect on human health and the environment. This paper reports the data obtained for the emissive characterization of POPs of three different wood biomass prunings (Olive, Citrus and Grapevine) focusing on VOCs, PAHs, PCBs, PCDD/Fs. Emissions samplings were performed at the stack during combustion in a 30 kW_th boiler equipped with a multicyclone filter bag for PM abatement in an isokinetic mode in accordance with the CEN and ISO standards methods. Through this work, a complete emission profile of VOCs, PAHs, PCBs, and PCDD/Fs of three different biomass types is provided for the first time, showing that the use of biomass boilers produces quantities of pollutants below the regulatory limits and still lower than those produced by open burning phenomena. Citrus has shown, regarding the other two essences, elevated concentrations in terms of Σ PAH = 174.247 ng/m³, while Olive gave higher results in terms of PCBs and PCDD/Fs (respectively, 39.769 and 3390.63 TEQ pg/Nm³). This is probably due to the high concentration of iron in this biomass (711.44 mg/kg), which during combustion is a catalyst (together with copper) of PCDD/Fs. Full article

The aim was (1) to analyse the features of the EDQM terminology, (2) to formulate proposals for minor changes and (3) to create a small ontology of dose forms, based on characteristics of EDQM, and suitable for alignment with other dose form terminologies. The 428 Pharmaceutical Dose Forms (PDF) (“human and veterinary” only) were extracted from the EDQM Standard Terms database. A quantitative and qualitative analysis of the textual definitions of the terms was conducted. Through an analysis of unique combinations of different sets of descriptors and characteristics, a small ontology was built in three levels. For the 143 transformable PDFs, the administrable dose form was made explicit, with 121 requiring only one transformation and 22 multiple transformations, of which 10 include “no transformation”. Different levels of aggregations of the 428 PDFs were tested in 4 analyses, ranging from 206 to 383 unique combinations. An ontology in Webprotégé was created of 22 higher-level concepts (based on the intended site characteristics) and 69 intermediate-level terms (newly created) to accommodate the 428 PDFs of EDQM. EDQM Dose Form terminology is suitable terminology in terms of granularity, for defining dose forms of medicinal products, to enable fair comparison of similar medicinal products, and global identification of medicinal products (IDMP). Recommendations for minor improvements and a simple ontology for dose forms are proposed. Full article

There is a global call for a paradigm shift in the construction industry towards carbon neutrality, but a scant effort has been madein practice, especially concerning circularity. This paper helps bridge the gap by introducing a parametric approach to optimize sustainable construction design. The methodology was tested on a newly constructed office building, inspired by circularity principles, in Westerlo, Belgium. The methodology consists of parametric construction-typological analysis, automated through One Click LCA software (Life Cycle Assessment) and Microsoft Excel with 21 alternate designs and 630 iterations. The parametric variations involved three key performance indicators: construction system, materials’ environmental impact, and materials; reuse of content. The environmental effects of both construction systems (i.e., structural system, foundation type, materials, and envelope details) and reused building materials content (i.e.,) were evaluated by the parametric analysis for four construction systems scenarios. Environmental impact analysis for timber, steel, concrete, and hybrid construction systems was conducted, following ISO 14040 and CEN/TC 350 standards. The focus of the whole life cycle assessment was mainly on carbon neutrality. Results indicate that using local biosourced materials, including timber, can remarkably reduce buildings’ environmental impact. The sensitivity analysis results provide hard evidence that the construction material’s weight, materials reuse potential, and construction dismantling ability are the most influential factors in carbon-neutral buildings. This paper should improve professionals’ understanding of the impact of different structural systems choices and inform building designers about the circularity potential, and carbon footprint of construction technologies. Full article

The paper assesses the legitimacy of the ISO/CEN standard for sustainable and traceable cocoa during the standard-setting process and thereby to establish the degree of legitimacy achieved and to explore new sources of legitimacy in the development of sustainability standards for agricultural commodities. The paper examines the normative and empirical legitimacy concerns involved in the development of the ISO/CEN standard for sustainable and traceable cocoa (ISO 34101 series). The findings suggest that while the standard-setting organisation is establishing normative legitimacy, empirical legitimacy is lacking. Absence of empirical legitimacy is a serious concern for a successful and just implementation. Full article

The phthalate and semi-volatile organic compounds (SVOCs) are modern chemical substances and extensively existing in the indoor environment. The European Commission stipulated the “European Unified Test Criteria”, since 2011, for the declared specifications of building products (CEN/TS 16516), based on the “lowest concentrations of interest (LCI)”, the index pollutants, test method, and emission standard of “phthalate” and “SVOC” were specified in detail. The purpose of this study is to use six common indoor floor construction products in Taiwan (regenerated pseudoplastic rubber flooring, healthy pseudoplastic imitation wood floor, regenerated pseudoplastic rubber flooring, PVC floor tile/floor, plastic click floor, composite floor covered with carpet) to detect the changes in the concentration of phthalate emitted to the air. The ISO 16000-25 Indoor air—Part 25: Determination of the emission of semi-volatile organic compounds by building products—micro-chamber method is used to build a DS-BMEMC (glass micro-chamber: volume 630 mL), the SVOC, including phthalate, is collected in two stages, in the stable conditions of temperature 25 °C, relative humidity 50% and air change rate 2 times/h, the Stage 1 emission detection experiment (24 h) is performed, and then the Stage 2 heating-up desorption emission detection experiment (40 min air sampling) is performed, the temperature rises to 200–220 °C, the phthalate and SVOC adsorbed on the glass micro-chamber is desorbed at a high temperature to catch the air substances, the air is caught by Tenax^®—TA and Florisil^® adsorption tube, and then the GC/MS and LC/MSMS analysis methods are used for qualitative and emission concentration analyses of SVOC of two-stage emission, respectively. The findings show that the floor construction materials emit nine phthalate SVOCs: DEHP, DINP, DNOP, DIDP, BBP, DBP, DIBP, DEP, and DMP, the two-stage emission concentrations are different, Stage 1 (normal temperature) emission concentration of six floor construction materials is 0.01–1.2% of Stage 2 (high temperature) emission concentration, meaning the phthalate SVOC of floor construction materials is unlikely to be volatilized or emitted at normal temperature. An interesting finding is that only S3 was detected DINP 72.6 (μg/m³) in stage 1. Others were detected DINP in stage 2. This might be because S3 has carpet on the surface. This implies that floor material with carpet may have an emission of DINP at normal temperature. The result of this study refers to the limited value evaluation of EU structural material standard emission TSVOC ≤ 0.1 ug/m³, the floor building material emissions are much higher than the evaluation criteria, increasing the health risk of users. The detection method and baseline can be used as the standard for controlling the emission of phthalate SVOC of Taiwan’s green building material labeling system in the future. Full article

Ever since the first publication of the standard communication protocol for computer-assisted electrocardiography (SCP-ECG), prENV 1064, in 1993, by the European Committee for Standardization (CEN), SCP-ECG has become a leading example in health informatics, enabling open, secure, and well-documented digital data exchange at a low cost, for quick and efficient cardiovascular disease detection and management. Based on the experiences gained, since the 1970s, in computerized electrocardiology, and on the results achieved by the pioneering, international cooperative research on common standards for quantitative electrocardiography (CSE), SCP-ECG was designed, from the beginning, to empower personalized medicine, thanks to serial ECG analysis. The fundamental concept behind SCP-ECG is to convey the necessary information for ECG re-analysis, serial comparison, and interpretation, and to structure the ECG data and metadata in sections that are mostly optional in order to fit all use cases. SCP-ECG is open to the storage of the ECG signal and ECG measurement data, whatever the ECG recording modality or computation method, and can store the over-reading trails and ECG annotations, as well as any computerized or medical interpretation reports. Only the encoding syntax and the semantics of the ECG descriptors and of the diagnosis codes are standardized. We present all of the landmarks in the development and publication of SCP-ECG, from the early 1990s to the 2009 International Organization for Standardization (ISO) SCP-ECG standards, including the latest version published by CEN in 2020, which now encompasses rest and stress ECGs, Holter recordings, and protocol-based trials. Full article

Many indices have been proposed for cardiovascular risk stratification from electrocardiogram signal processing, still with limited use in clinical practice. We created a system integrating the clinical definition of cardiac risk subdomains from ECGs and the use of diverse signal processing techniques. Three subdomains were defined from the joint analysis of the technical and clinical viewpoints. One subdomain was devoted to demographic and clinical data. The other two subdomains were intended to obtain widely defined risk indices from ECG monitoring: a simple-domain (heart rate turbulence (HRT)), and a complex-domain (heart rate variability (HRV)). Data provided by the three subdomains allowed for the generation of alerts with different intensity and nature, as well as for the grouping and scrutinization of patients according to the established processing and risk-thresholding criteria. The implemented system was tested by connecting data from real-world in-hospital electronic health records and ECG monitoring by considering standards for syntactic (HL7 messages) and semantic interoperability (archetypes based on CEN/ISO EN13606 and SNOMED-CT). The system was able to provide risk indices and to generate alerts in the health records to support decision-making. Overall, the system allows for the agile interaction of research and clinical practice in the Holter-ECG-based cardiac risk domain. Full article

The accurate study of aerosol composition and nicotine release by electronic cigarettes is a major issue. In order to fully and correctly characterize aerosol, emission generation has to be completely mastered. This study describes an original vaping machine named Universal System for Analysis of Vaping (U-SAV), dedicated to vaping product study, enabling the control and real-time monitoring of applied flow rate and power. Repeatability and stability of the machine are demonstrated on flow rate, power regulation and e-liquid consumption. The emission protocol used to characterize the vaping machine is based on the AFNOR-XP-D90-300-3 standard (15 W power, 1 Ω atomizer resistance, 100 puffs collected per session, 1.1 L/min airflow rate). Each of the parameters has been verified with two standardized liquids by studying mass variations, power regulation and flow rate stability. U-SAV presents the required and necessary stability for the full control of emission generation. The U-SAV is recognised by the French association for standardization (AFNOR), European Committee for Standardization (CEN) and International Standards Organisation (ISO) as a vaping machine. It can be used to highlight the influence of the e-liquid composition, user behaviour and nature of the device, on the e-liquid consumption and aerosol composition. Full article

The increased activity in the field of Battery Electric Vehicles (BEVs) and Hybrid Electric Vehicles (HEVs) have led to an increase in standardization work, performed by both world-wide organizations like the IEC or the ISO, as by regional and national bodies such as CEN, CENELEC, SAE or JEVA. The issues of these standards cover several topics: safety, performance and operational/dimension issues. This paper reports a brief overview of current standardization activities of lithium batteries based on IEC 62660-1/2 and ISO 12405-1/2. Furthermore, in this paper, a series of innovative test procedures for lithium-ion batteries are presented. Thanks to these tests, the general characteristics of a battery such as charge and discharge capabilities, power performances and life cycle can be determined. Then, a new approach for extracting the life cycle of a battery in function of depth of discharge has been developed. Full article