Search Results (10)

This study focuses on enhancing wind speed prediction for wildfire spread simulation by proposing an integrated forecasting approach. The original wind speed series is first processed via variational mode decomposition (VMD), with its parameters [K, $\alpha$] optimized via particle swarm optimization (PSO). Every intrinsic mode function (IMF) resulting from this decomposition is predicted using a bidirectional long short-term memory model incorporating an attention mechanism (AM-BiLSTM), and the final wind series is reconstructed from these predictions. Model training and validation were conducted using data from controlled burning experiments in the Mao’er Mountain area of Heilongjiang Province, China. Predictive performance is evaluated through multiple statistical metrics, error distribution analysis, and Taylor diagrams. To assess practical utility, the predicted wind field is further applied in FARSITE to drive wildfire spread simulations. Results demonstrate that the PSO-VMD-AM-BiLSTM model provides reliable wind forecasts and contributes to improved fire spread prediction accuracy, indicating its potential for decision support in wildfire management. To achieve accurate forest fire spread prediction, we construct the MCNN model, which is based on early perception of understory wind fields using predicted wind speed data and adopts a multi-branch convolutional neural network architecture to extract fire spread features. FARSITE is employed to simulate forest fire spread in the Mao’er Mountain region, generating a dataset for model training and testing. After 50 training epochs, the loss value of the MCNN model converges, achieving optimal prediction performance when the combustion threshold is set to 0.7. Compared to models such as CNN, DCIGN, and DNN, MCNN shows improvements in evaluation metrics including precision, recall, Sørensen coefficient, and Kappa coefficient. To validate the model’s predictive performance in real fire scenarios, four field ignition experiments were conducted at the Liutiao Village test site: homogeneous fuel combustion, long fire line combustion, alternating fuel combustion, and multiple ignition source merging combustion. Comprehensive evaluation across the four experiments indicates that the model achieves precision, recall, Sørensen coefficient, and Kappa coefficient values of 0.940, 0.965, 0.953, and 0.940, respectively, with stable prediction errors below 6%. These results represent improvements over the comparative models DCIGN and DNN. The proposed MCNN model can adapt to forest fire spread prediction under different scenarios, offering a novel approach for accurate forest fire prediction and prevention. Full article

Wildfire suppression is often represented in fire spread simulators as static barriers that completely stop fire propagation and are placed at the start of the simulation. Recent works have begun to simulate barriers introduced at different time frames, but these normally act as static barriers. In reality, many water-based suppression tactics (aerial and ground) only slow the fire spread by temporarily increasing fuel moisture and cooling the fuel bed. To address this limitation, we present a new simulation feature: the Dynamic Water Barrier. Unlike static barriers, this representation captures the temporal transient effect of water application, since it is modeled using a simplified water load and evaporation dynamics to estimate changes in live fuel moisture content (LFMC). Implemented using the Fire Area Simulator (FARSITE), the Dynamic Water Barrier reduces the rate of spread and fireline intensity, delaying but not fully preventing fire propagation, providing a transient influence of water-based suppression. The approach was tested on one North American (NA) and one Portuguese fire, where suppression missions were available. The dynamic barriers led to reductions in Relative Area Difference, reaching 0.234 for the Portuguese fire and 0.006 for the NA fire, outperforming the scenario of no combat and having a comparable performance with the full static barrier (RAD 0.108 and 0.024, respectively), while limiting the creation of unburned areas behind the firefront. Although the validation is limited, these findings illustrate the potential to improve tactical decision support and dynamic suppression planning in wildfire management, requiring further studies of other fires and controlled fire suppression missions. Full article

With increasing wildfire severity and duration driven by climate change, accurately predicting fire behavior over extended time frames is critical for effective management and mitigation of such wildfires. Fire propagation models play a pivotal role in these efforts, providing simulations that can be used to strategize and respond to active fires. This study examines the fire area simulator (FARSITE) model’s performance in simulating recent wildfire events that persisted over 24 h with limited firefighting intervention in mostly remote access areas across diverse ecosystems. Our findings reveal key insights into a prolonged wildfire scenarios potentially informing improvements in operational fire management and long-term predictive accuracy, as the area comparisons indexes showed reasonable results between the detected fires from the fire information for resource management systems (FIRMSs) in the first 24 h of the fire and the following days. A case study of a recent wildfire in Madeira Island highlights the integration of real-time weather predictions and post-event weather data analysis. This analysis underscores the potential of combining accurate forecasts with retrospective validation to improve predictive capabilities in dynamic fire environments, which guided the development of a software platform designed to analyse ongoing wildfire events in real-time, leveraging image satellite data and weather predictions. Full article

Understanding the potential effects of climate change on forest fire behavior and the resulting release of combustion products is critical for effective mitigation strategies in Greece. This study utilizes data from the MAGICC 2.4 (Model for the Assessment of Greenhouse Gas-Induced Climate Change) climate model and the SCENGEN 2.4 (SCENarioGENerator) database to assess these impacts. By manipulating various model parameters such as climate sensitivity, scenario, time period, and global climate models (GCMs) within the SCENGEN 2.4 database, we analyzed climatic trends affecting forest fire generation and evolution. The results reveal complex and nuanced findings, indicating a need for further investigation. Case studies are conducted using the FARSITE 4 (Fire Area Simulator) model, incorporating meteorological changes derived from climate trends. Simulations of two fires in East Attica, accounting for different fuel and meteorological conditions, demonstrate an increase in the rate of combustion product release. This underscores the influence of changing meteorological parameters on forest fire dynamics and highlights the importance of proactive measures to mitigate future risks. Our findings emphasize the urgency of addressing climate change impacts on wildfire behavior to safeguard environmental and public health in Greece. Full article

With the development of computer technology, forest fire spread simulation using computers has gradually developed. According to the existing research on forest fire spread, the models established in various countries have typical regional characteristics. A fire spread model established in a specific region is only suitable for the local area, and there is still a great deal of uncertainty as to whether or not the established model is suitable for fire spread simulation for the same fuel in other regions. Although many fire spread models have been established, the fuel characteristics applicable to each model, such as the fuel loading, fuel moisture content, combustibility, etc., are not similar. It is necessary to evaluate the applicability of different fuel characteristics to different fire spread models. We combined ground investigation, historical data collection, model improvements, and statistical analysis to establish a multi-model forest fire spread simulation method (FIRER) that shows the burning time, perimeter, burning area, overlap area, and spread rate of fire sites. This method is a large-scale, high-resolution fire growth model based on fire spread in eight directions on a regular 30 m grid. This method could use any one of four different physical models (McArthur, Rothermel, FBP, and Wang Zhengfei (China)) for fire behavior. This method has an option to represent fire breaks from roads, rivers, and fire suppression. We can evaluate which model is more suitable in a specific area. This method was tested on a single historical lightning fire in the Daxing’an Mountains. Different scenarios were tested and compared: using each of the four fire behavior models, with fire breaks on or off, and with a single or suspected double fire ignition location of the historical fire. The results show that the Rothermel model is the best model in the simulation of the Hanma lightning fire; the overlap area is 5694.4 hm². Meanwhile, the real fire area in FIRER is 5800.9 hm²; both the Kappa and Sørensen values exceed 0.8, providing high accuracy in fire spread simulations. FIRER performs well in the automatic identification of fire break zones and multiple ignited points. Compared with FARSITE, FIRER performs well in predicting accuracy. Compared with BehavePlus, FIRER also has advantages in simulating large-scale fire spread. However, the complex data preparation stage of FIRER means that FIRER still has great room for improvement. This research provides a practical basis for the comparison of the practicability and applicability of various fire spread models and provides more effective practical tools and a scientific basis for decision-making and the management of fighting forest fires. Full article

Modeling the spread of wildland fires is essential for assessing and managing fire risks. However, this task remains challenging due to the partially stochastic nature of fire behavior and the limited availability of observational data with high spatial and temporal resolutions. Herein, we propose an attention-based deep learning modeling approach that can be used to learn the complex behaviors of wildfires across different fire-prone regions. We integrate optimized spatial and channel attention modules with a convolutional neural network (CNN) modeling architecture and train the attention-based fire spread models using a recently derived fire-tracking satellite observational dataset in conjunction with corresponding fuel, terrain, and weather conditions. The evaluation results and their comparison with benchmark models, such as a deeper and more complex autoencoder model and the semi-empirical FARSITE fire behavior model, demonstrate the effectiveness of the attention-based models. These new data-driven fire spread models exhibit promising modeling performances in both the next-step prediction (i.e., predicting fire progression from one timestep earlier) and recursive prediction (i.e., recursively predicting final fire perimeters from initial ignition points) of observed large wildfires in California, and they provide a foundation for further practical applications including short-term active fire spread prediction and long-term fire risk assessment. Full article

The present study investigates the effect of climatic parameters, such as air relative humidity and wind speed, on fire spread propagation indexes in the Malekroud Forest, Iran using the FARSITE simulator based on Rothermel’s original fire spread equation. Standard fuel models are used to calibrate the vegetation cover. Sorensen (SC) and kappa ($\kappa$) coefficients, as well as the Overestimation Index (OI), are used to estimate the simulation’s accuracy. The results confirm that using both ambient condition data and appropriate fuel models is crucial to reaching reasonable results in fire propagation simulations. The values of the Rate of Fire Spread (ROS), Flame Length (FML), and Fire Line Intensity (FLI) are reported for each particular scenario. The simulation results show that the Sorensen and Kappa coefficient for situations most similar to the real fire reached 0.82 and 0.80, respectively. The investigated fire’s severity is categorized as low-condition fire behavior. The simulation shows that fire propagation falls harshly in the case of air relative humidity by more than 72%, and we will not witness natural fire propagation on a large scale. Full article

Each year, wildfires ravage the western U.S. and change the lives of millions of inhabitants. Situated in southern California, coastal Santa Barbara has witnessed devastating wildfires in the past decade, with nearly all ignitions started by humans. Therefore, estimating the risk imposed by unplanned ignitions in this fire-prone region will further increase resilience toward wildfires. Currently, a fire-risk map does not exist in this region. The main objective of this study is to provide a spatial analysis of regions at high risk of fast wildfire spread, particularly in the first two hours, considering varying scenarios of ignition locations and atmospheric conditions. To achieve this goal, multiple wildfire simulations were conducted using the FARSITE fire spread model with three ignition modeling methods and three wind scenarios. The first ignition method considers ignitions randomly distributed in 500 m buffers around previously observed ignition sites. Since these ignitions are mainly clustered around roads and trails, the second method considers a 50 m buffer around this built infrastructure, with ignition points randomly sampled from within this buffer. The third method assumes a Euclidean distance decay of ignition probability around roads and trails up to 1000 m, where the probability of selection linearly decreases further from the transportation paths. The ignition modeling methods were then employed in wildfire simulations with varying wind scenarios representing the climatological wind pattern and strong, downslope wind events. A large number of modeled ignitions were located near the major-exit highway running north–south (HWY 154), resulting in more simulated wildfires burning in that region. This could impact evacuation route planning and resource allocation under climatological wind conditions. The simulated fire areas were smaller, and the wildfires did not spread far from the ignition locations. In contrast, wildfires ignited during strong, northerly winds quickly spread into the wildland–urban interface (WUI) toward suburban and urban areas. Full article

Extreme, downslope mountain winds often generate dangerous wildfire conditions. We used the wildfire spread model Fire Area Simulator (FARSITE) to simulate two wildfires influenced by strong wind events in Santa Barbara, CA. High spatial-resolution imagery for fuel maps and hourly wind downscaled to 100 m were used as model inputs, and sensitivity tests were performed to evaluate the effects of ignition timing and location on fire spread. Additionally, burn area rasters from FARSITE simulations were compared to minimum travel time rasters from FlamMap simulations, a wildfire model similar to FARSITE that holds environmental variables constant. Utilization of two case studies during strong winds revealed that FARSITE was able to successfully reconstruct the spread rate and size of wildfires when spotting was minimal. However, in situations when spotting was an important factor in rapid downslope wildfire spread, both FARSITE and FlamMap were unable to simulate realistic fire perimeters. We show that this is due to inherent limitations in the models themselves, related to the slope-orientation relative to the simulated fire spread, and the dependence of ember launch and land locations. This finding has widespread implications, given the role of spotting in fire progression during extreme wind events. Full article

Accurate canopy base height (CBH) information is essential for forest and fire managers since it constitutes a key indicator of seedling growth, wood quality and forest health as well as a necessary input in fire behavior prediction systems such as FARSITE, FlamMap and BEHAVE. The present study focused on the potential of airborne LiDAR data analysis to estimate plot-level CBH in a dense uneven-aged structured forest on complex terrain. A comparative study of two widely employed methods was performed, namely the voxel-based approach and regression analysis, which revealed a clear outperformance of the latter. More specifically, the voxel-based CBH estimates were found to lack correlation with the reference data ( $R^2=0.15$ , $rRMSE=42.36\%$ ) while most CBH values were overestimated resulting in an $rbias$ of $-17.52\%$ . On the contrary, cross-validation of the developed regression model showcased an $R^2$ , $rRMSE$ and $rbias$ of $0.61$ , $18.19\%$ and $-0.09\%$ respectively. Overall analysis of the results proved the voxel-based approach incapable of accurately estimating plot-level CBH due to vegetation and topographic heterogeneity of the forest environment, which however didn’t affect the regression analysis performance. Full article