Search Results (6,272)

This study employs a fluid–structure interaction (FSI) collision-modeling approach to investigate the hydrodynamic effects on impact forces during collisions involving ships and bridges. The influences of the collision speed, the mass of the ship, and the water-flow velocity on the impact force are investigated. The constant added-mass (CAM) method is a widely employed technique in relevant studies to account for water influence due to its efficiency in conserving computational resources and reducing analysis time. This method is also employed in numerical simulations for comparative analysis. The impact force and dynamical response of a container ship using the FSI and CAM methods are investigated to determine whether the CAM method is suitable for considering the influence of the water surrounding the ship. The impact forces assessed by numerical simulations are also compared with the existing formulae. It is found that the water flow significantly affects the collision force, which must be taken into account in high-energy collision situations. Full article

Against the backdrop of increasing global warming, exploring sustainable pathways to mitigate the greenhouse effect has become a central issue for the ecological and energy future. Photocatalytic reduction of CO₂ technology shows a broad application prospect due to its ability to directly convert CO₂ into high-value-added hydrocarbon fuels and to use solar energy, a clean energy source, to drive the reaction. However, traditional semiconductor catalysts generally suffer from insufficient activity and poor product selectivity in the actual reaction, which cannot meet the requirements of practical applications. In recent years, sulfur vacancy, as an effective material modulation strategy, has demonstrated a remarkable role in enhancing photocatalytic performance. This paper reviews a series of research reports on sulfur vacancies in recent years, introduces the methods of preparing sulfur vacancies, and summarizes the commonly used characterization methods of sulfur vacancies. Finally, the mechanism of introducing sulfur vacancies to promote CO₂ reduction is discussed, which improves the photocatalytic activity and selectivity by enhancing light absorption, facilitating carrier separation, improving CO₂ adsorption and activation, and promoting the stability of reaction intermediates. This review aims to provide theoretical support for an in-depth understanding of the role of sulfur vacancies in photocatalytic systems and to provide a view on the future direction and potential challenges of sulfur vacancies. Full article

Controlling dry matter intake (DMI) is one strategy to reduce feed costs and increase efficiency. Including fat at a high concentrate level can increase the energy density of diets fed to ruminants, thus reducing DMI further. Therefore, the objective of this study was to evaluate the effects on fermentation and nutrient digestion of including different fat sources when high-concentrate diets with high-fat inclusion are used under simulating precision feeding in continuous culture. We hypothesized that incorporating different fat sources into the aforementioned program can improve nutrient utilization without affecting rumen fermentation. Four treatments were randomly assigned to eight continuous cultures in a randomized complete block design and ran for two periods of 10 d. Diets included a high concentrate level (HC; 65% DM) with high-fat inclusion starting with a 3% basal level of fat in the diet as the control (0% added fat; CON) and 9% fat in the diet (6% added poultry fat, PF; 6% added coconut oil, CO; and (6% added soybean oil, SO). Data were analyzed using the MIXED procedure of SAS with repeated measures. The DM, OM, NDF, and ADF digestibility coefficients (dCs) were higher for PF and CO, followed by SO and then CON. Starch and FA dCs were higher for different fat sources than for the CON. The total VFA concentration was higher for CON. There was a reduction in acetate and propionate with different fat sources. The mean culture pH and NH₃N were the highest for CO, followed by PF, then SO, and CON. The protozoa population was higher for CON than for the other fat treatments, followed by CO, PF, and SO. These results suggest that simulated precision feeding using continuous culture fermenters with high-concentrate diets up to 65% and high fat up to 6% can improve nutrient digestion approximately to 15% with changes in fermentation rate and profiles. Full article

The increasing demand for smart bone substitutes has boosted the implementation of biomaterials possibly endowed with both pro-osteogenic and pro-angiogenic capabilities, among which bioactive glasses hold great potential. Hence, two Poly(ε-caprolactone) (PCL)-based composites were loaded at 10 wt.%, with either pristine (SBA3) or copper-doped (SBA3_Cu) silica-based bioactive glasses, through a solvent casting method with chloroform. Neat PCL was used as a control. Samples produced by 3D printing underwent SEM and EDX analyses, and the following were measured: tensile strength and hardness, surface roughness, ion release through ICP-OES, surface free energy, and optical contact angle. Adipose-derived mesenchymal stem cells (ASCs) and human microvascular endothelial cells (HMEC-1) were used to test the biocompatibility of the materials through cell adhesion, spreading, and viability assays. A significant improvement in tensile strength and hardness was observed especially with Cu-doped composites. Both SBA3 and SBA3_Cu added to the PCL favored the early adhesion and the proliferation of HMEC-1 after 3 and 7 days, while ASCs proliferated significantly the most on the SBA-containing composite, at all the time points. Cellular morphology analysis highlighted interesting adaptation patterns to the samples. Further biological characterizations are needed to understand thoroughly how specific bioactive glasses may interact with different cellular types. Full article

Mixing hydrogen into natural gas pipelines for transportation is an effective solution to the imbalance between the supply and demand of hydrogen energy. Studying the influence of bent pipes in hydrogen-mixed natural gas explosion accidents can enhance the safety of hydrogen energy storage and transportation. Through experiments and LES, the influence of pipe spacing configuration on the vented explosion of this mixed gas in pipes with a large length-to-diameter ratio was analyzed. The maximum explosion pressure (Pmax) of the straight pipe is 21.7 kPa and the maximum pressure rise rate ((dp/dt)max) is 1.8 MPa/s. After adding the double elbow, Pmax increased to 65.2 kPa and (dp/dt)max increased to 3.7 MPa/s. By increasing the distance (D1) from bent pipe-1 to the ignition source, the flame shape changes from “finger-shaped” to “concave-shaped” to “wrinkled-shaped.” When D1 is at its minimum, the explosion reaction is the most intense. However, as D1 increases, each characteristic parameter decreases linearly and the flame propagation speed significantly reduces, the flame area decays more severely, and the flame acceleration effect is also suppressed. When the distance between the two bent pipes (D2) was gradually increased, the flame transformed from “finger-shaped” to “tongue-shaped” to “wrinkled-shaped”. The flame area curve exhibited a unique evolutionary process of “hitting bottom” to “rebounding” to “large-scale flame backflow”. This paper explores the development process of various characteristic parameters, which is of great reference value for preventing explosions in hydrogen-blended natural gas pipelines in underground pipe galleries. Full article

Coastal erosion is a growing concern in the Mediterranean region, where the combined effects of anthropogenic pressure, reduced fluvial sediment supply, and climate change-driven sea level rise and extreme storm events threaten the stability of sandy shorelines. This study examines the geomorphological impacts of the exceptional storm surge of 3 November 2023, associated with Storm Ciaran, which affected a vulnerable coastal segment north of the Morto Nuovo River in northern Tuscany (Italy). Using UAV-based photogrammetric surveys and high-resolution morphological analysis, we quantified shoreline retreat, dune toe regression, beach slope changes, and sediment volume loss. The storm induced an average shoreline retreat of over 5 m, with local peaks reaching 30 m, and a dune toe setback of up to 7 m. A net sediment budget deficit of approximately 1800 m³ was recorded, over 50% of the total volume added during soft nourishment interventions performed in the previous decade. Our findings highlight how a single high-energy event can match or exceed the annual average erosion rate, emphasizing the limitations of traditional shoreline-based monitoring and hard defense structures. This study highlights the importance of frequent, high-resolution monitoring focused on individual storm events, which is crucial to better understand their specific geomorphological impacts. Such detailed analyses help clarify whether long-term erosion trends are primarily driven by the cumulative effect of high-energy events. This knowledge is essential for identifying the most effective coastal protection strategies and for improving the design of defense structures. This approach is particularly relevant in the context of climate change, which is expected to increase the frequency and intensity of extreme events, making it imperative to base future planning on accurate, event-driven data. Full article

In this study, we propose a novel metaheuristic algorithm named Kangaroo Escape optimization Technique (KET), inspired by the survival-driven escape strategies of kangaroos in unpredictable environments. The algorithm integrates a chaotic logistic energy adaptation strategy to balance a two-phase exploration process—zigzag motion and long-jump escape—and an adaptive exploitation phase with local search guided by either nearby elite solutions or random peers. A unique decoy drop mechanism is introduced to prevent premature convergence and ensure dynamic diversity. KET is applied to optimize the parameters of a fractional-order Proportional Integral Derivative (PID) controller for Load Frequency Control (LFC) in interconnected power systems. The designed fractional-order PID controller-based KET optimization extends the conventional PID by introducing fractional calculus into the integral and derivative terms, allowing for more flexible and precise control dynamics. This added flexibility enables enhanced robustness and tuning capability, particularly useful in complex and uncertain systems such as modern power systems. Comparative results with existing state-of-the-art algorithms demonstrate the superior robustness, convergence speed, and control accuracy of the proposed approach under dynamic scenarios. The proposed KET-fractional order PID controller offers 29.6% greater robustness under worst-case conditions and 36% higher consistency across multiple runs compared to existing techniques. It achieves optimal performance faster than the Neural Network Algorithm (NNA), achieving its best Integral of Time Absolute Error (ITAE) value within the first 20 iterations, demonstrating its superior learning rate and early-stage search efficiency. In addition to LFC, the robustness and generality of the proposed KET were validated on a standard speed reducer design problem, demonstrating superior optimization performance and consistent convergence when compared to several recent metaheuristics. Full article

Coal is still China’s primary energy source, and the production process of coal produces industrial byproduct coal gangue. This study explores the possibility of using industrial byproducts of thermal power generation, fly ash (FA) and calcined coal gangue (CCG), as a partial (10% and 20%) substitute for cement in construction materials. Methodical research was conducted to determine how these two substances affect the microstructure and macroscopic characteristics of cement-based materials. Macroscopic performance test findings indicate that replacing 20% of cement with CCG had no discernible effect on the specimens’ performance. At the same time, adding FA required 28 days to be comparable to the control group. Mercury intrusion porosimetry (MIP) test results show that using CCG can refine microscopic pores. Additional hydration products could be produced by these materials, according to analyses using Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The production of hydration products by CCG to fill the microscopic pores was further demonstrated by scanning electron microscopy (SEM) pictures. After 28 days of hydration, a layer of hydration products developed on the surface of FA. When supplementary cementitious materials (SCMs) were added, calcium hydroxide (CH) was consumed by interacting with FA and CCG to form additional hydration products, according to thermogravimetric analysis (TG) data after 28 days. Furthermore, an evaluation of FA and CCG’s effects on the environment revealed that their use performed well in terms of sustainable development. Full article

The citrus processing industry is an economically important agro-industrial sector worldwide; however, it produces significant amounts of waste annually. The biorefinery concept and the recovery of bio-based materials from agro-industrial residues, including citrus processing waste, are emphasized in the European Green Deal, reflecting the EU’s commitment to fostering circularity. Biotreatment of citrus processing waste, including bioconversion into biomethane, biohydrogen, bioethanol and biodiesel, has been applied to valorize biomass for energy recovery. It can also be composted into a valuable soil conditioners and fertilizers, while raw and fermented citrus residues may exhibit phytoprotective activity. Citrus-derived residues can be converted into materials such as nanoparticles with adsorptive capacity for heavy metals and recalcitrant organic pollutants, and materials with antimicrobial properties against various microbial pathogens, or the potential to remove antibiotic-resistance genes (ARGs) from wastewater. Indeed, citrus residues are an ideal source of industrial biomolecules, like pectin, and the recovery of bioactive compounds with added value in food processing industry. Citrus processing waste can also serve as a source for isolating specialized microbial starter cultures or as a substrate for the growth of bioplastic-producing microorganisms. Solid-state fermentation of citrus residues can enhance the production of hydrolytic enzymes, with applications in food and environmental technology, as well as in animal feed. Certain fermented products also exhibit antioxidant properties. Citrus processing waste may be used as alternative feedstuff that potentially improves the oxidative stability and quality of animal products. Full article

Effective arsenic removal is a challenge when smelting high-arsenic copper minerals (HACMs, As > 3.0 wt%). Current arsenic-removal methods for HACM smelting cannot effectively remove arsenic and do not satisfy environmental requirements. This study argues that two-stage filtration based on Fe-25Al porous material and oxygen-controlled roasting is an effective technique for HACM arsenic removal (As = 11.8 wt%). The use of two-stage filtration facilitated double interception: particles larger than 10 μm were mechanically intercepted by the pore channels, and submicron particles (0.1–10 μm) were intercepted by the filter cake. Specifically, in the second stage, the flue gas underwent gradient rapid cooling, and the arsenic in the flue gas rapidly condensed, resulting in efficient arsenic removal. The purity of the condensed product, As₂O_3, was greater than 99%. Moreover, adding sand to the roasted mineral increased the specific surface area from 0.484 m²/g to 0.590 m²/g, reducing the “bottleneck effect” of pores; the addition of carbon further increased the surface area to 2.457 m²/g, inhibiting the formation of arsenate. When the mineral feed rate increased from 50 kg/h to 80 kg/h, the oxygen partial pressure decreased; this effectively inhibited the formation of iron arsenate, and the arsenic removal efficiency increased from 70.20% to 95.61%. The optimized process achieved ≥94% arsenic removal efficiency and ≥76% sulfur-fixation efficiency, with low energy cost. Material balance analysis showed that after arsenic removal, the Cu/Si to Fe/Si ratio of the copper mineral reached 1.5, which is appropriate for immediate subsequent smelting. This study provides a new technological strategy for HACM arsenic removal. Full article

Existing non-intrusive load monitoring (NILM) methods predominantly rely on centralized models, which introduce privacy vulnerabilities and lack scalability in large industrial park scenarios equipped with distributed energy resources. To address this issue, a Federated Temporal Pattern-based NILM framework (FedTP-NILM) is proposed. It aims to ensure data privacy while enabling efficient load monitoring in distributed and heterogeneous environments, thereby extending the applicability of NILM technology in large-scale industrial park scenarios. First, a federated aggregation method is proposed, which integrates the FedYogi optimization algorithm with a secret sharing mechanism to enable the secure aggregation of local data. Second, a pyramid neural network architecture is presented to capture complex temporal dependencies in load identification tasks. It integrates temporal encoding, pooling, and decoding modules, along with an enhanced feature extractor, to better learn and distinguish multi-scale temporal patterns. In addition, a hybrid data augmentation strategy is proposed to expand the distribution range of samples by adding noise and linear mixing. Finally, experimental results validate the effectiveness of the proposed federated learning framework, demonstrating superior performance in both distributed energy device identification and privacy preservation. Full article

This study aims to explore the influence mechanism of wet fermented soybean dregs on corn stover formation, improve the forming quality of straws and reduce the power demand and specific energy consumption of forming equipment. This study takes 2 mm and 4 mm corn stover sizes as the objects and explores the influence of different amounts of fermented soybean dregs on the volume relaxation ratio, maximum compressive force and specific energy consumption of straw forming pellets under compression displacements of 90 mm and 92 mm. Different amounts of water are selected according to the total moisture content of the mixed feed, and the effects of adding water and fermented wet soybean dregs on feed forming are compared and studied. The results indicate that, under certain conditions, adding water or wet fermented soybean dregs to straw is beneficial for shaping. Adding wet fermented soybean dregs to straw can improve the nutritional value of feed and promote the utilization of agricultural waste. Therefore, adding wet fermented soybean dregs is an effective method for processing high-quality feed pellets. Taking into account the quality and specific energy consumption of mixed feed processing, the optimal pelleting process for corn stover and wet fermented soybean dregs in a mixed feed is as follows: straw particle size of 4 mm, added mass ratio of wet fermented soybean dregs of 5% and compression displacement of 92 mm. These results support the research and development of technology and devices for high-quality and low-energy mixed formation using fermented soybean dregs and straw, and they offer a new route for the utilization of other high-moisture feeds. Full article

This paper presents the design, simulation, and fabrication of a horn antenna integrated with a dielectric lens for focusing RF energy at 10 GHz. The antenna system combines established electromagnetic principles with 3D printing techniques to produce a cost-effective alternative to commercial focusing antennas. The design methodology employs the lensmaker’s formula and Snell’s law to determine lens curvature for achieving a specified focal length of 100 mm. COMSOL Multiphysics simulations indicate that adding a PTFE lens increases power density concentration compared to a standard horn antenna, with a simulated focal point at approximately 100 mm. Surface roughness analysis based on the Rayleigh criterion supports 3D printing suitability for this application. Experimental validation includes radiation pattern measurements of the antenna without the lens and power density measurements versus distance with the lens, both showing good agreement with simulation results. The measured focal length was $95\pm 5$ mm, closely matching simulation predictions. This work presents an approach for implementing focused RF delivery solutions for medical treatments, wireless power transfer, and precision sensing at significantly lower costs than commercial alternatives. Full article

Waste activated sludge (WAS), a byproduct of livestock wastewater treatment, poses significant disposal challenges due to its low biodegradability and potential environmental impact. Anaerobic digestion (AD) offers a sustainable approach for methane recovery and sludge stabilization. This study evaluates the biomethane potential (BMP) of WAS and its co-digestion with swine slurry (SS), water lily (Nymphaea spp.), and lotus (Nelumbo nucifera) shoot biomass to enhance methane yield. Batch BMP assays were conducted at substrate-to-inoculum (S/I) ratios of 1.0 and 0.5, with methane production kinetics analyzed using the modified Gompertz model. Mono-digestion of WAS yielded 259.35–460.88 NmL CH₄/g VS_added, while co-digestion with SS, water lily, and lotus increased yields by 14.89%, 10.97%, and 16.89%, respectively, surpassing 500 NmL CH₄/g VS_added. All co-digestion combinations exhibited synergistic effects (α > 1), enhancing methane production beyond individual substrate contributions. Lower S/I ratios improved methane yields and biodegradability, highlighting the role of inoculum availability. Co-digestion reduced the lag phase limitations of WAS and plant biomass, improving process efficiency. These findings demonstrate that co-digesting WAS with nutrient-rich co-substrates optimizes biogas production, supporting sustainable sludge management and renewable energy recovery in livestock wastewater treatment systems. Full article

Anaerobic digestion (AD) is a sustainable and widely adopted technology for the treatment of organic solid wastes (OSWs). However, AD efficiency varies significantly across different substrates, primarily due to differences in the microbial community and metabolic pathways. This review provides a comprehensive summary of the AD processes for four types of typical OSWs (i.e., sewage sludge, food waste, livestock manure, and straw), with an emphasis on their universal characteristics across global contexts, focusing mainly on the electron transfer mechanisms, essential microbial communities, and key metabolic pathways. Special attention was given to the mechanisms by which substrate-specific structural differences influence anaerobic digestion efficiency, with a focused analysis and discussion on how different components affect microbial communities and metabolic pathways. This study concluded that the hydrogenotrophic methanogenesis pathway, TCA cycle, and the Wood–Ljungdahl pathway serve as critical breakthrough points for enhancing methane production potential. This research not only provides a theoretical foundation for optimizing AD efficiency, but also offers crucial scientific insights for resource recovery and energy utilization of OSWs, making significant contributions to advancing sustainable waste management practices. Full article