Search Results (18)

This study explores the fundamental components and specificities of agroforestry policies in France and Quebec, with a particular focus on the regions of Brittany and Montérégie. It uses a mixed-methods approach, combining an in-depth literature review and 14 semi-structured interviews with various stakeholders, including research institutions, agricultural advisory organizations, independent experts, and regional public agencies engaged in agroforestry and environmental initiatives. The collected data were qualitatively analyzed using word frequency and co-occurrence techniques, based on Elinor Ostrom’s Institutional Analysis and Development (IAD) framework. The results reveal that in France, agroforestry benefits from a well-structured policy environment, centered on the Common Agricultural Policy (CAP) and the Agroforestry Development Plan (PDA). The Breizh Bocage initiative is making a positive contribution to this, with more than 5000 km of hedges planted thanks to its localized governance model and direct community funding. In Quebec, agroforestry is also supported by various policies and programs such as Prime-Vert, with more than 2370 hedge planting projects completed. Despite its strengths, the French case, particularly the Breizh Bocage program, is limited by cumbersome administrative procedures. In both contexts, stakeholders emphasize the need to improve the transparency and efficiency of the program by simplifying administrative processes and harmonizing financial support mechanisms. Full article

Excessive consumption of natural resources to meet the growing demands of building and infrastructure projects has put enormous stress on these resources. On the other hand, a significant quantity of soil is excavated for development activities across the globe and is usually treated as waste material. This study explores the potential of excavated soils in the Brittany region of France for its reuse as earthen construction materials. Characterization of soil recovered from building sites was carried out to classify the soils and observe their suitability for earthen construction materials. These characteristics include mainly Atterberg limits, granulometry, organic matter and optimum moisture content. Soil samples were separated into fine and coarse particles through wet sieving. The percentage of fines (particles smaller than 0.063 mm) in studied soil samples range from 28% to 65%. The methylene blue value (MBV) for Lorient, Bruz and Polama soils is 1, 1.2 and 1.2 g/100 g, and French classification (Guide de terrassements des remblais et des couches de forme; GTR) of soil samples is A1, B5 and A1, respectively. The washing of soils with lower fine content helps to recover excellent-quality sand and gravel, which are a useful and precious resource. However, residual fine particles are a waste material. In this study, three soil formulations were used for manufacturing earth blocks. These formulations include raw soil, fines and restructured soil. In restructured soil, a fine fraction of soil smaller than 0.063 mm was mixed with 15% recycled sand. Restructuring of soil fine particles helps to improve soil matrix composition and suitability for earth bricks. Compressed-earth blocks of 4 × 4 × 16 cm were manufactured at a laboratory scale for flexural strength testing by using optimum molding moisture content and compaction through Proctor normal energy. Compressive strength tests were performed on cubic blocks of size 4 × 4 × 4 cm. Mechanical testing of bricks showed that bricks with raw soil had higher resistance with a maximum of 3.4 MPa for Lorient soil. Removal of coarse particles from soil decreased the strength of bricks considerably. Restructuring of fines with recycled sand improves their granular skeleton and increases the compressive strength and durability of bricks. Full article

The CPES (Channel Payments for Ecosystem Services) project developed PES schemes remunerating farmers for their activities in improving water quality by reducing the emissions of nutrients (both nitrogen and phosphorus) or erosion from agricultural activities. Catchment-wide approaches were tested in six case studies, and ecology, hydrogeology, agroeconomy, law, and farming expertise was combined. Collaborations were established with farmers, their associations, chambers of agriculture, and local and regional stakeholders. One case study concerned Lac au Duc (Brittany), a reservoir suffering from recurrent cyanobacterial blooms. Curative actions to control cyanobacteria had limited success. The main sources of excess P entering the lake were of farming origin but varied between the sub-catchments according to hydrogeological characteristics and agricultural practices. Long-term prevention possibilities to ameliorate agricultural practices and their costs were developed with the farmers and included permanent cover or anti-erosive hedges. During the project, PESs were successfully applied for ground water protection by the water supply companies as drinking water protection has a strong business case to preserve this ecosystem service. For recreational or multi-purpose lakes and reservoirs, it remains difficult to find financing to meet the monetary requirements to address farmer’s transition to ameliorate land management. Full article

Soil is continuously excavated for development activities in urban and rural areas and treated as waste. This study investigates the characteristics of urban soils excavated from earthworks of buildings in the Brittany region of France for their perspective reuse in earthen construction materials to valorize soil waste and provide a sustainable building material locally. Excavated soil from earthwork activities was taken from the Brittany region of France from three different locations. Soil suitability for compressed earth blocks was investigated based on their granulometry, consistency limits, and mineralogy. Finally, compressed earth blocks with dimensions of 4 × 4 × 16 cm³ were manufactured with different formulations and compacted dynamically. Flexural and compressive strength tests were performed on bricks to observe their mechanical behavior. Grain size analysis of soil samples shows that the percentage of clay in the landfill stockpile of excavated soils varies between 13% and 16%, while at some local sites, the percentage of clay goes up to 57%. The grain size of soils varies from the recommended zone. The plasticity of soil samples ranges from 17.3% to 20.4%. The plasticity index and clay content of the soil show that these soils are inactive clays with a lesser possibility of swelling and shrinkage. Mineralogical analysis of soil shows the absence of water-sensitive clay minerals, while quartz, kaolinite, and illite are major minerals present in soils. Linear shrinkage in bricks ranges from 0.6% to 2.2% and is considerably higher for clayey soils. Mechanical testing of earth bricks shows that the compressive strength of earth blocks ranges from 0.92 MPa to 2.22 MPa while the flexural strength ranges from 0.25 to 0.74 MPa. A mixture of sandy and clayey soils shows good strength due to improved granulometry. Earth bricks with soils from some stockpiles, excavation sites, and soil mixture show compressive strength higher than 1 MPa, which is recommended strength by international standards, and offer the opportunity to produce sustainable building materials locally. Full article

Refined numerical wave energy resource assessments are required to reduce uncertainties in the evaluation of available power and energy production. However, to restrict the computational cost, a great part of wave hindcast simulations cover a limited time range (below ten years) or rely on coarse spatial resolutions while routinely ignoring tide-induced modulations in wave conditions. Complementing resource assessments conducted in the North-West European shelf seas, we here exploited a 27-year hindcast database (1994–2020) set up at a spatial resolution of 200 m along the coast of France and integrating the effects of tidal currents on waves. This evaluation was conducted in three water depths from offshore to nearshore (60, 40 and 20 m) around Brittany, one of the most energetic regions along the coast of France. We investigated the performances of a series of thirteen state-of-the-art wave energy converters with respect to installation depth range. Beyond confirming the interest of western Brittany in energy exploitation, the results exhibited the first ranking between devices, thus promoting the interests of Oceantec in offshore waters (60 m), Wave Dragon in intermediate waters (40 m), and Oyster and WaveStar C6 in shallow waters (20 m). Full article

Rhodolith seabeds are ‘ecosystem engineers’ composed of free-living calcareous red macroalgae, which create extensive marine habitats. This study addressed how depth influenced the structure (size and morphology) of rhodoliths and the abundance of associated floral and faunal epibionts across the Eastern Atlantic Ocean. Sampling was carried out at two sites within five regions (Brittany, Galicia, Madeira, Gran Canaria, and Principe Island), from temperate to tropical, covering a latitudinal gradient of 47°, in three depth strata (shallow, intermediate and deep), according to the rhodolith bathymetrical range in each region. Depth typically affected the rhodolith size at all regions; the largest nodules were found in the intermediate and deep strata, while rhodolith sphericity was larger at the shallow depth strata. Higher biomasses of attached macroalgae (epiphytes) were observed at depths where rhodoliths were larger. The abundance of epifauna was variable across regions and depth strata. In general, the occurrence, structure, and abundance of the associated biota across rhodolith habitats were affected by depth, with local variability (i.e., sites within regions) often displaying a more significant influence than the regional (large-scale) variation. Overall, this study showed that the rhodolith morphology and associated epibionts (flora and fauna) were mostly affected by depth, irrespective of latitude. Full article

Esophageal cancer is the sixth most common cause of cancer death worldwide. In France, Brittany is one of the regions most seriously affected. This increased incidence is usually linked to high rates of alcohol overconsumption and smoking, established risk factors for esophageal cancer, but the region has special occupational exposures. We aim to describe the occupational exposures of patients with esophageal cancer. Between June and October 2020, we conducted a monocentric descriptive study in a French Teaching Hospital and identified 37 eligible patients. We gathered data through a systematic individual interview for each participant and by an analysis of their medical file. We were able to include 36 patients; most were men (n = 27, 75.0%) and smokers (n = 25, 69.4%), 21 (58.3%) presented an adenocarcinoma esophageal cancer, 13 (36.1%) a squamous cell cancer, and 2 other types. On occupational exposure, patients declared respectively high exposure by manipulating asbestos materials for 11 (30.6%) patients, regularly in contact with benzene by handling fuel in 7 cases (19.4%), chlorinated solvents in 4 cases (11.1%), pesticides in 4 cases, and ionizing radiation exposure in 3 patients (8.3%). Our findings support the creation of a large-scale study to explore the impact of occupational exposures, particularly exposure to asbestos and hydrocarbons. Full article

Improving the assessment and prediction of soil organic nitrogen (N) mineralization is essential: it contributes significantly to the N nutrition of crops and remains a major economic and environmental challenge. Consequently, a network of 137 fields was established in Brittany, France, to represent the wide diversity of soils and cultivation practices in this region. The experimental design was developed to measure net N mineralization for three consecutive years, in order to improve the accuracy of measuring it. Net N mineralization was quantified by the mineral N mass balance, which was estimated from March to October for a maize crop with no N fertilization. The effect of climate on mineralization was considered by calculating normalized time (ndays) and, then, calculating the N mineralization rate (Vn) as the ratio of the mineral N mass balance to normalized time. Strict screening of the experimental data, using agronomic and statistical criteria, resulted in the selection of a subset of 67 fields for data analysis. Mean Vn was relatively high (0.99 kg N ha⁻¹ nday⁻¹) over the period and varied greatly, from 0.62 to 1.46 kg N ha⁻¹ nday⁻¹ for the 10th and 90th percentiles, respectively. The upper soil layer (0–30 cm) was sampled to estimate its physical and chemical properties, particulate organic matter carbon and N fractions (POM-C and POM-N, respectively), soil microbial biomass (SMB), and extractable organic N (EON) determined in a phosphate borate extractant. The strongest correlations between Vn and these variables were observed with EON (r = 0.47), SMB (r = 0.45), POM-N (r = 0.43), and, to a lesser extent, the soil N stock (r = 0.31). Vn was also strongly correlated with a cropping system indicator (r = 0.39). A modeling approach, using generalized additive models, was used to identify and rank the variables with the greatest ability to predict net N mineralization. Full article

Archaeological 3D digitization of skeletal elements is an essential aspect of the discipline. Objectives are various: archiving of data (especially before destructive sampling for biomolecular studies for example), study or for pedagogical purposes to allow their manipulation. As techniques are rapidly evolving, the question that arises is the use of appropriate methods to answer the different questions and guarantee sufficient quality of information. The combined use of different 3D technologies for the study of a single Mesolithic bone fragment from Brittany (France) is here an opportunity to compare different 3D digitization methods. This oldest human bone of Brittany, a clavicle constituted of two pieces, was dug up from the mesolithic shell midden of Beg-er-Vil in Quiberon and dated from ca. 8200 to 8000 years BP. They are bound to post-mortem processing, realized on fresh bone in order to remove the integuments, which it is necessary to better qualify. The clavicle was studied through a process that combines advanced 3D image acquisition, 3D processing, and 3D printing with the goal to provide relevant support for the experts involved in the work. The bones were first studied with a metallographic microscopy, scanned with a CT scan, and digitized with photogrammetry in order to get a high quality textured model. The CT scan appeared to be insufficient for a detailed analysis; the study was thus completed with a µ-CT providing a very accurate 3D model of the bone. Several 3D-printed copies of the collarbone were produced in order to support knowledge sharing between the experts involved in the study. The 3D models generated from µCT and photogrammetry were combined to provide an accurate and detailed 3D model. This model was used to study desquamation and the different cut marks, including their angle of attack. These cut marks were also studied with traditional binoculars and digital microscopy. This last technique allowed characterizing their type, revealing a probable meat cutting process with a flint tool. This work of crossed analyses allows us to document a fundamental patrimonial piece, and to ensure its preservation. Copies are also available for the regional museums. Full article

The increasing demand for energy is leading to the increasing use of renewable resources, such as biomass, resulting in the significant development of the wood energy sector in recent years. On the one hand, and to a certain extent, the sector has generated many benefits. On the other hand, the challenges related to wood ash (WA) management such as increasing tonnages, landfilling, restrictive regulations for reuse, etc., have been weighing more heavily in the debate related to the wood energy sector. However, all studies have assumed that no environmental impacts can be attributed to WA production. This study aims at discussing this assumption, whether the WA is a waste or a co-product of heat generation. In the first place, WA deposits were estimated using the biomass database and ash content from the literature regarding the collective, industrial and tertiary biomass power plants (BPP) in the French region of Brittany. Then, the impacts of the generated WA were estimated using the attributional life cycle assessment (LCA) method through two different impact allocation procedures (IAP), “from cradle to gate” (excluding the waste treatment). In Brittany, for the year 2017, an estimated amount of 2.8 to 8.9 kilotons of WA was generated, and this production should increase to 5 to 15.7 kilotons by 2050. The LCA conducted through this study gave an emission of 38.6 g CO_2eq/kW h, with a major contribution from the production of the wood chips. Considering the environmental aspect, the IAP analysis indicated that energy and economic allocations were not relevant, and that, using the mass allocation, the environmental production of WA could represent 1.3% of the impacts of the combustion process in BPP. Therefore, WA, and especially the fly ash, can be considered as a waste from BPP heat production, without any environmental impact attributed to its generation. Full article

Taking advantage of a multi-sensor (multispectral and magnetic) drone survey, we address the detailed geological mapping and modeling of a mineralization in its geological environment. We stress that these high-resolution data allow us to bridge the gap between field observations and a regional aeromagnetic survey. On the one hand, the combination of multispectral imagery with field geological observations enhances detailed geological mapping. On the other hand, the combination of field magnetic susceptibility measurement and their use in detailed to regional magnetic modeling, constrained respectively by UAV-borne and airborne magnetic surveys, allows deriving a model of the mineralization consistent across the scales. This is demonstrated in a case study in a complex polyphased magmatic-metamorphic environment on the coast of French Brittany. The target area hosts a pseudo-skarn mineralization, exhibiting an outstanding magnetic anomaly. The combination of remotely sensed and field data allows deriving a realistic conceptual and geometrical model of the magnetic mineralization in its geological environment, tightly constrained by field observations and measurements. Full article

The occupation of a territory combines a set of variables which affect the development of the mode by which populations have been organized throughout history. How this occupation takes place demonstrates much of a territory’s past and shows how the populations managed to make the most out of the available resources. The region of Entre-Douro-e-Minho (Northern Portugal), similarly to what happens in other regions, such as Galicia (Northern Spain), Brittany (Northern France), or Ireland, presents a type of dispersed land use, with an alternation of urban, agriculture, and forest areas. On one hand, this proximity allows urban populations to come into contact with a rural environment. On the other hand, this proximity also causes a set of problems, namely those related to rural fires, which are now enhanced by climate change, and associated phenomena, such as heatwaves and the lack of precipitation. The present work analyzes the evolution of rural fires in 1975–2019, in the municipality of Guimarães (Northern Portugal), to understand how these events have been distributed over time and evolved in a climate change scenario. Based on the results and discussion presented, it can be concluded that there is an increasing trend in the occurrence of rural fires in the territory under study, and that this can also be associated to climate change, in the form of a gradual increment in temperature, particularly in the autumn months, and a decrease in rainfall. This situation is responsible for the increment of the risk caused by the proximity of the populations to forest and agricultural areas because rural fires can jeopardize the safety of people and goods. Full article

Background/Objectives: Peripheral arterial disease is a frequent and severe disease with high cardiovascular morbidity and mortality. However, female patients appear to be undertreated. Objectives: The primary goal was to compare the prescription of optimal medical treatment (OMT) of peripheral arterial disease between women and men in primary health care. Material and methods: An observational retrospective study was based on the data collected from general practitioners (GP) office in Brittany. Results: The study included 100 patients, aged 71 ± 10 years old, with 24% of women. Compared to men, women received the OMT less frequently (29.2% vs. 53.9%, p = 0.038), especially after 75 years old. Antiplatelet therapy was largely prescribed (100%), statins less frequently (70.8% women vs. 85.5% men), and prescription of renin-angiotensin-aldosterone system inhibitors was still not optimal in the two genders (41.7% women vs. 61.9% men). Active smoking is important for both women and men (33% and 30% respectively). Conclusion: Optimal medical treatment of peripheral artery disease is insufficiently prescribed, especially in women in this region of France. Full article

Magnetic surveying is a widely used and cost-efficient remote sensing method for the detection of subsurface structures at all scales. Traditionally, magnetic surveying has been conducted as ground or airborne surveys, which are cheap and provide large-scale consistent data coverage, respectively. However, ground surveys are often incomplete and slow, whereas airborne surveys suffer from being inflexible, expensive and characterized by a reduced signal-to-noise ratio, due to increased sensor-to-source distance. With the rise of reliable and affordable survey-grade Unmanned Aerial Vehicles (UAVs), and the developments of light-weight magnetometers, the shortcomings of traditional magnetic surveying systems may be bypassed by a carefully designed UAV-borne magnetometer system. Here, we present a study on the development and testing of a light-weight scalar field UAV-integrated magnetometer bird system (the CMAGTRES-S100). The idea behind the CMAGTRES-S100 is the need for a high-speed and flexible system that is easily transported in the field without a car, deployable in most terrain and weather conditions, and provides high-quality scalar data in an operationally efficient manner and at ranges comparable to sub-regional scale helicopter-borne magnetic surveys. We discuss various steps in the development, including (i) choice of sensor based on sensor specifications and sensor stability tests, (ii) design considerations of the bird, (iii) operational efficiency and flexibility and (iv) output data quality. The current CMAGTRES-S100 system weighs ∼5.9 kg (including the UAV) and has an optimal surveying speed of 50 km/h. The system was tested along a complex coastal setting in Brittany, France, targeting mafic dykes and fault contacts with magnetite infill and magnetite nuggets (skarns). A 2.0 × 0.3 km area was mapped with a 10 m line-spacing by four sub-surveys (due to regulatory restrictions). The sub-surveys were completed in 3.5 h, including >2 h for remobilisation and the safety clearance of the area. A noise-level of ±0.02 nT was obtained and several of the key geological structures were mapped by the system. Full article

Refined assessments of the available tidal stream energy resource are required to optimize turbines design and guarantee successful implementations and operations of devices in the marine environment. Investigations primary focused on identifying areas with maximum current speeds. However, further information may be reached by exhibiting (i) resource temporal variability, (ii) superimposed effects of meteo-oceanographic conditions (including especially wind-generated surface-gravity waves), and (iii) potential environmental impacts of operating turbines at the regional (e.g., changes in sediment transport and surrounding seabed features, effects on marine water quality, etc.) and local (wake-wake interactions and energy output) scales. These aspects are here investigated by reviewing a series of research studies dedicated to the Fromveur Strait off western Brittany, a region with strong potential for tidal array development along the coast of France. Particular attention is dedicated to the exploitation of combined in-situ and remote-sensing observations and numerical simulations. Beyond a site specific characterization of the tidal stream energy resource, this review promotes a series of original approaches and analysis methods for turbines optimization, thus complementing technical specifications to secure the key steps of a tidal energy project and promote the growth of a reliable tidal stream energy exploitation. Full article