Search Results (235)

Seismic metamaterials (SMs) have emerged as a novel wave-control strategy for earthquake-resistant engineering, offering the potential to manipulate seismic waves via artificially designed periodic/resonant structures. Field and laboratory experiments are critical to bridge theoretical predictions and engineering practice, yet a systematic synthesis focusing on experimental progress remains lacking. This review systematically classifies SMs into buried (BSMs), above-surface (ASMs), and partially embedded (PESMs) configurations, summarizing their structural designs, attenuation mechanisms, experimental performance, and key limitations. Results show that SMs can achieve >70% attenuation in the 0–50 Hz seismic band, with buried periodic barriers reaching 99.7% energy blocking and forest-like ASMs achieving 93–99% Rayleigh wave reduction. PESMs exhibit superior adaptability to shallow soils, with bandgaps concentrated in 1.5–14.5 Hz (building-sensitive range). Current experiments have advanced from single mechanisms to multi-mechanism synergy and from specialized materials to conventional concrete/steel. However, critical gaps remain: scaling-induced deviations, poor complex-geology adaptability, lack of long-term durability, and insufficient multi-waveform control. Finally, we propose a 3–10-year engineering roadmap and outline future directions: multi-waveform regulation, soil–metamaterial dynamic matching, durability design, and full-scale intelligent upgrades. This work aims to provide a critical experimental reference for the practical deployment of SMs. Full article

In this study, we present a thermal-aware design of a compact hybrid plasmonic grating (HPG) TE-pass polarizer on X-cut lithium niobate on insulator (LNOI) for fiber-optic gyroscopes (FOGs). In a three-dimensional simulation, the optimization of the trapezoidal sidewall angle (θ = 78°) and the thickness of the Ag grating (13 nm) yield a polarization extinction ratio of 36.2 dB at 1550 nm (with a peak of 41.4 dB at 1548 nm) within a sub-10 μm grating length. This represents a ~3–8 dB improvement over prior LNOI HPG polarizers at the same footprint. A multiphysics thermo-optic analysis over the wide industrial FOG envelope (from −45 to +85 °C) demonstrates that the operating-wavelength polarization extinction ratio remains within the range of 24.7–36.2 dB across the entire 130 K span (worst case 24.7 dB at −25 °C), constrained solely by a modest 10 pm/K Bragg detuning stemming from the pronounced (~5) thermo-optic anisotropy of LN. The insertion loss exhibits a negligible drift of merely 0.73 dB. A fabrication tolerance study identified the Ag thickness as the predominant budgetary constraint (±1 nm tolerance, PER dropping ~10 dB at the resonance edge), while the ridge width and oxide buffer demonstrated comparatively greater flexibility. The device, therefore, fulfills the criteria for FOG-grade polarization suppression across most of the operational temperature range. The −25 °C point is established at the 25 dB threshold, thereby providing concrete design guidelines for ensuring environmentally stable on-chip polarization control on LNOI. Full article

Fiber Bragg Grating (FBG) sensors are widely used for strain and temperature monitoring due to their high sensitivity, compact size, electromagnetic immunity, and multiplexing capability. While conventional FBG interrogators remain bulky and costly, Photonic Integrated Circuit (PIC) platforms provide a promising route toward compact, scalable, and low-power FBG interrogation. However, the choice of architecture strongly determines the achievable resolution, bandwidth, multiplexing capacity, and robustness. This review compares on-chip demodulation architectures, evaluating their performance in resolution, bandwidth, and interrogation speed. We show that the optimal architecture depends strongly on the application: AWG-based schemes excel in compact, multi-FBG readout; ring-resonator systems are highly effective for tunable filtering; and interferometric phase-domain schemes offer the highest sensitivity for dynamic strain sensing. Despite these architectural advances, practical deployment remains constrained by system-level bottlenecks. These challenges primarily include source/detector integration, fiber–chip coupling, packaging robustness, and thermal drift. Overcoming these barriers requires a shift in future development from isolated photonic-device optimization toward comprehensive, system-level co-design. Full article

Metastructures, waveguides composed of multiple unit cells (meta-atoms), have gained significant attention for controlling wave propagation in engineering applications, especially in the context of elastic and acoustic waves. However, existing metastructures often lack sufficient tunable functionality to dynamically control both elastic vibration and acoustic wave transmission using a single external parameter. This study introduces a phase-change material (PCM)-embedded meta-atom, where a core mass is connected to an outer shell by Archimedean spiral bridges. The solid–liquid phase transition of PCM induces a notable change in the effective shear modulus, enabling dynamic wave control. The mechanism for bandgap formation transitions from Bragg scattering in the solid PCM state to local resonance in the liquid state. Core rotation, driven by the phase transition, is key to generating flat bands and low-frequency locally resonant bandgaps at high temperatures. Temperature-dependent, mode-selective transmission behavior is observed, with transverse vibrations and acoustic waves exhibiting opposite blocking and transmission characteristics at the same frequency. This design provides a promising approach for decoupling sound and vibration management, using temperature control driven by the PCM phase transition. The work contributes to multifunctional metastructures with applications in adaptive noise control, structural health monitoring, and tunable vibration isolation systems. Full article

Long-distance coal gangue slurry transportation pipelines are critical components of underground coal mine green backfilling systems, yet blockage failures severely threaten their safe and efficient operation. Existing distributed acoustic sensing (DAS)-based monitoring methods for such pipelines suffer from three key limitations: insufficient fixed-point quantitative accuracy, lack of verified blockage-specific characteristic indicators, and limited quantitative severity assessment capability. To address these gaps, this paper proposes a novel feature-level fusion monitoring method integrating DAS, fiber Bragg grating (FBG), and piezoelectric accelerometers for accurate blockage identification and quantitative evaluation in coal gangue slurry pipelines. A slurry pipeline circulation test platform with gradient blockage simulation (0% to 76.42%) and a synchronous multi-sensor monitoring system were developed. Through multi-domain signal analysis, three blockage-correlated characteristic frequencies were identified and cross-validated by synchronous multi-sensor data: 1.5 Hz (system background vibration), 26 Hz (blockage-induced fluid–structure resonance, verified by the Euler–Bernoulli beam theory with a theoretical value of 25.7 Hz), and 174 Hz (transient flow impact). The DAS phase change rate exhibited a unimodal nonlinear response to blockage degree, with the peak occurring at 40.94% blockage. On this basis, a sine-fitting quantitative inversion model was developed, achieving a high goodness of fit (R² = 0.985), and leave-one-out cross-validation confirmed its excellent robustness with a mean relative prediction error of 3.77%. Finally, a collaborative monitoring framework was built to fully leverage the complementary advantages of each sensor, realizing full-process blockage monitoring covering global blockage localization, precise quantitative severity calibration, and high-frequency transient risk early warning. The proposed method provides a robust experimental and technical foundation for real-time early warning, precise localization, and quantitative diagnosis of long-distance slurry pipeline blockages and holds important engineering application value for the safe and efficient operation of underground coal mine green backfilling systems. Full article

Insulation deterioration is the leading cause of premature failures in high-voltage (HV) power equipment, with partial discharge (PD) serving as a key indicator of insulation health. This study introduces a novel compact PD sensor assembly that integrates fiber Bragg grating (FBG) with an exponential acoustic horn to enhance the sensitivity of PD detection. The horn’s geometry effectively collects ultrasonic emissions from the PD, concentrating the acoustic energy to amplify the force on the FBG located at its focal point. To further enhance signal transduction, the FBG is mounted on a fixed solid structure engineered to resonate at higher ultrasonic frequencies that closely align with the dominant acoustic components generated by PD activity, ensuring improved strain amplification and optimal sensitivity. This results in measurable wavelength shifts, which are used for PD detection. A fiber Bragg grating analyzer interrogates the reflected spectra, providing real-time PD detection during HV operations. The effectiveness of the system was validated against the IEC 60270 standard method using laboratory models that emulated corona and surface discharge. The laboratory experiments demonstrated a significant sensitivity of 2.2 pm/Pa and a favorable signal-to-noise ratio of ~21 dB for the proposed sensor module. The dielectric construction of the sensor module, lightweight design, and resistance to electromagnetic interference make it suitable for harsh HV environments and the long-term condition monitoring of HV power equipment. Full article

This paper proposes a novel solution to suppress backward wave oscillation (BWO) in high-order mode (HOM) sheet beam (SB) slow-wave structures (SWSs) and designs an isolator between cavities based on a Bragg resonator. This method can cut-off the backward wave signal path without interrupting the operating signal path, thereby eliminating BWO while maintaining high circuit gain. Simulation results show that the S21 parameter of the isolator is less than −20 dB from 175 GHz to 228 GHz. To verify the method’s performance, particle-in-cell (PIC) simulation was conducted based on a HOM SB SWS—a T-slot coupled-cavity (TSCC) SWS. Results indicate that this method can effectively suppress BWO and shows significant improvement in gain and output power compared to traditional methods such as sever or lossy loading. Under operating conditions of 34.4 kV and 0.35 A, the circuit achieves a maximum output power of 527 W at 216 GHz, a maximum gain of 36.39 dB at 214.4 GHz, and a bandwidth of 3 GHz where the output power exceeds 300 W. Full article

In this study, a double-lattice photonic crystal structure was designed to achieve deep ultraviolet lasing without the use of any Distributed Bragg Reflector (DBR), which is called a photonic-crystal surface-emitting laser (PCSEL). The plane wave expansion (PWE) method was used to study the influence of various structural parameters on the resonant wavelength. Utilizing the random forest algorithm, we determined that the importance of the lattice constant to the resonant wavelength is 95.24%. Furthermore, we realized the reverse design of double-lattice photonic crystals from the target wavelength to optimal structural parameters through a radial basis function (RBF) network algorithm. Comparative analysis of the extreme learning machine (ELM) and back propagation (BP) algorithms demonstrated that RBF-based performance was notably superior to the training outcomes of other algorithms. The mean absolute error (MAE) of the lattice constant of the test set in the training results was 0.7610 nm, root mean square error (RMSE) was $1.143\times {10}^{-3}$ nm, and mean absolute relative error (MARE) was $5.489\times {10}^{-3}$. We verified the reliability of the algorithm and designed 13 groups of photonic crystals with different epitaxial structures. The mean square error (MSE) was 0.6188 ${\mathrm{nm}}^2$ compared with that of the plane wave expansion method. This work demonstrates applicability across various wavebands and epitaxial structures in GaN-based devices, providing a novel approach for the rapid iteration of deep ultraviolet PCSELs. Full article

The combination of gold nanoparticles (AuNPs) with hydrogels has drawn significant interest in the design of smart materials as advanced platforms for biomedical applications. These systems endow light-responsiveness enabled by the AuNPs localized surface plasmon resonance (LSPR) phenomenon. In this study, we propose a nanocomposite hydrogel in which gold nanorods (AuNRs) are included in an agarose–carbomer–hyaluronic acid (AC-HA)-based hydrogel matrix to study the correlation between light irradiation, local temperature increase, and drug release for potential light-assisted drug delivery applications. The gel is obtained through a facile microwave-assisted polycondensation reaction, and its properties are investigated as a function of both the hyaluronic acid molecular weight and ratio. Afterwards, AuNRs are incorporated in the AC-HA formulation, before the sol–gel transition, to impart light-responsiveness and optical properties to the otherwise inert polymeric matrix. Particular attention is given to the evaluation of AuNRs/AC-HA light-induced heat generation and drug delivery performances under near-infrared (NIR) laser irradiation in vitro. Spatiotemporal thermal profiles and high-resolution thermal maps are registered using fiber Bragg grating (FBG) sensor arrays, enabling accurate probing of maximum internal temperature variations within the composite matrix. Lastly, using a high-steric-hindrance protein (BSA) as a drug mimetic, we demonstrate that moderate localized heating under short-time repeated NIR exposure enhances the release from the nanocomposite hydrogel. Full article

This study explores the tunable characteristics of optical Tamm states (OTS) in a metal–distributed Bragg reflector (DBR) structure integrated with a monolayer of molybdenum disulfide (MoS₂). Through finite element simulations, we demonstrate that incorporating MoS₂ enhances electromagnetic field localization at the metal–DBR interface, facilitating enhanced exciton–photon interaction. As the number of DBR periods increases, the OTS resonance wavelength undergoes a blue shift and eventually stabilizes, which indicates a wavelength-locking behavior. Under external bias, the locking threshold is lowered, and the resonance wavelength exhibits a nearly linear blue shift of approximately ~1 nm/V. Moreover, absorptance varies non-monotonically with the metal thickness, reaching over 99% at a thickness of 25 nm, due to the combined effects of plasmonic confinement and MoS₂ excitonic enhancement. These findings demonstrate the potential of this structure for application in tunable photonic devices such as optical filters and modulators. Full article

Optical fiber biosensors have evolved into powerful tools for non-invasive biomedical analysis. While foundational principles are well-established, recent years have marked a paradigm shift, driven by advancements in nanomaterials, fabrication techniques, and data processing. This review provides a focused overview of these emerging trends, critically analyzing the innovations that distinguish the current generation of optical fiber biosensors from their predecessors. We begin with a concise summary of fundamental sensing principles, including Surface Plasmon Resonance (SPR) and Fiber Bragg Gratings (FBGs), before delving into the latest breakthroughs. Key areas of focus include integrating novel 2D materials and nanostructures to dramatically enhance sensitivity and advancing synergy with Lab-on-a-Chip (LOC) platforms. A significant portion of this review is dedicated to the rapid expansion of clinical applications, particularly in early cancer detection, infectious disease diagnostics, and continuous glucose monitoring. We highlight the pivotal trend towards wearable and in vivo sensors and explore the transformative role of artificial intelligence (AI) and machine learning (ML) in processing complex sensor data to improve diagnostic accuracy. Finally, we address the persistent challenges—biocompatibility, long-term stability, and scalable manufacturing—that must be overcome for widespread clinical adoption and commercialization, offering a forward-looking perspective on the future of this dynamic field. Full article

This study presents the design, modeling, and experimental validation of a frequency-tuned mechanical sensor (MS) integrating a fiber bragg grating (FBG) for the detection of leak-induced vibrations in pressurized steel pipelines. Unlike conventional bonded FBGs—which directly follow the local wall deformation—the proposed MS consists of a base-fiber-mass transducer geometrically tuned so that its natural frequencies coincide with the dominant vibration modes of the pipe in the 5–7 kHz range. A combined framework of finite element analysis (FEA), computational fluid dynamics (CFD), and laboratory measurements was developed to assess the coupling between the pipe and the sensor. Results show that the MS behaves as a selective mechanical amplifier, enhancing strain sensitivity and signal-to-noise ratio (SNR) by up to 15 dB compared to a directly bonded FBG. The workflow integrates modal tuning, an equivalent harmonic excitation derived from CFD-based pressure fields, and frequency–response validation, leading to a mechanically optimized FBG transducer capable of discriminating high-frequency leak signatures. The excellent agreement between the simulation and experiment confirms that geometric resonance coupling provides an effective route to amplify leak-induced strain, offering a compact, scalable, and high-sensitivity solution for vibration-based leak detection in industrial pipelines. Full article

In this paper, the propagation of surface gravity waves over multiple bottom-standing porous semicircular humps is examined in the absence and presence of double floating $\mathit{C}$-type detached asymmetric breakwaters. Both wave scattering and trapping phenomena are investigated within the framework of small-amplitude linear water wave theory, with the governing problem numerically solved using the multi-domain Boundary Element Method (BEM) in finite-depth water. A detailed parametric analysis is conducted to evaluate the effects of key physical parameters, including hump radius, porosity, spacing between adjacent humps, and the separation between the two $\mathit{C}$-type detached breakwaters. The study presents results for reflection and transmission coefficients, free-surface elevations, and the horizontal and vertical forces acting on the first perforated semicircular hump, as well as on the shore-fixed wall. The findings highlight the significant role of porous humps in altering Bragg scattering characteristics. For larger wavenumbers, wave reflection increases notably in the presence of a vertical shore-fixed wall, while it tends to vanish in its absence. Reflection is also observed to decrease with an increase in semicircle radius. Furthermore, as the wavenumber approaches zero, the vertical force on multiple permeable semicircles converges to zero, whereas for impermeable semicircles, it approaches unity. In addition, the horizontal force acting on the shore-fixed wall diminishes rapidly with increasing porosity of the semicircular humps. Full article

We theoretically analyze the spatial Goos-Hänchen (GH) shifts in symmetric Graphene-Integrated Bragg Gratings (GIBGs), where monolayer graphene arrays act as tunable input/output couplers, and a periodically inserted dielectric layer forms a resonant cavity. By optimizing the cavity design, we achieve a GH shift of 1766λ, surpassing the conventional limit of hundreds of wavelengths under single-parameter tuning. The direction and magnitude can be actively controlled by the graphene’s chemical potential, grating geometry, or dielectric thickness. This mechanism may enable high-sensitivity refractive index sensors or adaptive optical devices. Full article

A high-sensitivity terahertz (THz) biosensor is proposed in this paper based on a multi-layer hybrid structure consisting of a defect mode and graphene with a truncation layer. This biosensor is based on symmetrical Bragg reflectors with a defect layer and graphene with a truncation layer, which effectively comprise a multi-layer hybrid resonance excitation structure. The high sensitivity of this biosensor is developed through defect mode resonance, and the resonance reflection peak is made sharper and more sensitive by using graphene with a truncation layer. After testing and analysis, the sensitivity of this biosensor structure is greatly affected by the refractive index and thickness of the sensing medium. By setting parameters appropriately, the composite structure can be used as both a liquid biosensor and a gas biosensor, the maximum sensitivity of which can surpass 2000°/RIU, while an FOM value of 22,500 RIU⁻¹ can be achieved. At the same time, when the refractive index of the liquid sensing medium changes to 0.01 relative to water (the same applies to changes in the gas sensing medium), the sensitivity of this structure still exceeds 600°/RIU, demonstrating that this biosensor has advantages including high sensitivity, a high FOM, wide applicability, and slow sensitivity attenuation. Therefore, the sensing scheme proposed in this paper has potential application prospects in the field of biosensing based on micro/nanostructures due to its simple structure, low requirements for processing conditions, and high sensitivity. Full article