Search Results (120)

Three processes for the production of ceramics close to stoichiometric MgAl₂O₄ are benchmarked against each other. The traditional ceramic route is based on mostly crystalline starting powder, which is converted into ceramic via shaping and heat treatment (IKTS). The other two processes are based on glasses. Partial or complete crystallization without pressure (ISC) or complete crystallization with pressure (CAU) leads to (glass) ceramics. Spinel powder is mixed with various dopants (BaO, TiO₂, CaO and SrO), with the aim to reduce the grain size (IKTS). The doping results in a second, partly interfering phase, and the transmission decreases strongly due to absorption with increasing content of the added oxide. For the glass route without pressure (ISC), it is shown that a network-forming oxide (B₂O₃, TiO₂) is needed to produce the glasses. Compared to the starting glasses, the resultant glass ceramics suffer loss of transparency due to crystallization. Using the levitation furnace, it is possible to produce amorphous glass beads from MgAl₂O₄ enriched with 25 wt% SiO₂ without a container. The nanocrystalline ceramics synthesized from these glasses and the ISC glasses via the high-pressure route (CAU) are moderately transparent to translucent. Full article

The tectonic evolution of the Paleo-Asian Ocean during the Early to Middle Permian remains a key issue in understanding the geodynamic history of the Central Asian Orogenic Belt. To address this, we conducted petrological, whole-rock geochemical, zircon U–Pb geochronological, and Hf isotopic analyses of Early Permian biotite granodiorite and Middle Permian porphyritic granite from the south-central Great Xing’an Range. Zircon U–Pb dating yields ages of 273.2 ± 1.4 Ma and 264.4 ± 1.5 Ma, indicating that these intrusions emplaced during Early and Middle Permian. Geochemical analyses show that the rocks are characterized by high SiO₂ and Al₂O₃ contents, and low MgO and CaO contents and belong to the metaluminous to weakly peraluminous series, typical of I-type granites. The rocks are enriched in light rare earth elements and large-ion lithophile elements (e.g., Rb, Ba, K), but depleted in heavy rare earth elements and high field strength elements (e.g., Nb, Ta, P, Ti), with weakly negative Eu anomalies. The Early Permian pluton exhibits low-Sr and high-Yb characteristics and thus fall in the plagioclase stability field. In contrast, Middle Permian pluton was derived from magmas generated by partial melting under high-pressure conditions and that, underwent crystal fractionation during ascent to the mid-upper crust, ultimately forming low-Sr and low-Yb type granites. All zircon ε_Hf(t) values are positive (+4.84 to +14.87), with the corresponding two-stage Hf model ages ranging from 345 Ma to 980 Ma, indicating that the magmas were predominantly derived from juvenile crustal materials accreted during the Neoproterozoic to Phanerozoic. Considering these results, we propose that the Paleo-Asian Oceanic plate continued to subduct beneath the Songliao–Xilinhot block to the north during the Early to Middle Permian, with intense subduction and crustal thickening occurring in the Middle Permian. This suggests that the south-central segment of the Great Xing’an Range was situated in an active continental marginal setting during the Early-Middle Permian. Full article

High-efficiency, lead-free dielectrics are sought for pulsed-power capacitors, yet pristine Bi_0.5Na_0.5TiO₃ (BNT) suffers from large remanence, high coercivity, and limited breakdown strength. Here, we report (1 − x)Bi_0.5Na_0.5Ti_0.97Nb_0.03O₃-xSr_0.85Ba_0.15Ta_0.5+0.02xAl_0.5−0.02xO₃ (BNTNb–SBTA, x = 0–0.15) ceramics synthesized via solid-state reaction, achieving enhanced relaxor ferroelectric behavior through multi-cation substitution at A- and B-sites. X-ray diffraction confirms a pure perovskite solid solution, while scanning electron microscopy reveals grain refinement, suppressing oxygen vacancies and boosting the breakdown strength. Raman and dielectric analyses evidence strengthened relaxor behavior, accompanied by loop slimming and a systematic rise in breakdown strength. The composition x = 0.10 achieves the best trade-off, delivering W_rec = 3.357 J cm⁻³ and η = 90.5% at E_b = 240 kV cm⁻¹. Robust operational stability is demonstrated with small variations of W_rec/η over 0.1–200 Hz, 25–175 °C, and 10⁶ cycles. Pulsed tests show fast discharge (∼26 ns) with W_d = 0.826 J cm⁻³ at ∼90% efficiency under moderate fields. These results indicate that synergistic A/B-site disorder (Sr/Ba on A-site; Ta/Al with Nb on B-site), combined with microstructural densification, effectively minimizes P_r while elevating E_b, enabling high-efficiency energy storage under practical operating conditions. Full article

Ba_0.6Sr_0.4TiO₃ (BST) thin films were deposited on ITO substrates via rf magnetron sputtering, followed by structural and morphological characterization using XRD and FE-SEM. Metal–insulator–metal (MIM) RRAM devices were fabricated by depositing Al top electrodes, and their electrical properties were examined through I–V measurements. The optimized BST films deposited at 40% oxygen concentration exhibited stable resistive switching, with an operating voltage of 3 V, an on/off ratio of 1, and a leakage current of 10⁻⁸ A. After rapid thermal annealing at 500 °C, the on/off ratio improved to 2 but leakage increased to 10⁻³ A. Incorporating an electron transport layer (ETL) effectively suppressed the leakage current to 10⁻⁵ A while maintaining the on/off ratio at 2. Moreover, a transition from bipolar to unipolar switching was observed at higher oxygen concentration (60%). These results highlight the role of ETLs in reducing leakage and stabilizing switching characteristics, providing guidance for the development of transparent, low-power, and high-reliability BST-based RRAM devices. This study aims to investigate the role of Ba_0.6Sr_0.4TiO₃ (BST) ferroelectric oxide as a functional switching layer in resistive random-access memory (RRAM) and to evaluate how interface engineering using an electron transport layer (ETL) can improve resistive switching stability, leakage suppression, and device reliability. Full article

A systematic investigation was conducted into the effects of varying Al₂O₃ and SrO contents on the structure, sintering kinetics, crystallization patterns, and properties of the SrO-BaO-ZnO-MgO (RO)-B₂O₃-Al₂O₃-SiO₂ (RBAS) system. This glass-ceramic demonstrates effective applicability for low-temperature co-firing of alumina ceramics. Increasing Al₂O₃ content densified the glass network and reduced crystallinity, thereby promoting sintering densification. It led to improved acid resistance and a lower coefficient of thermal expansion (CTE). The composition with 17.50 mol% Al₂O₃ sintered at 800 °C exhibited optimal properties: a well-matched CTE of 7.45 × 10⁻⁶ K⁻¹, a high flexural strength of 130.58 MPa, and excellent chemical stability. Furthermore, it demonstrated excellent compatibility when co-sintered with an Al₂O₃ substrate. Full article

Kimberlite has attracted considerable interest among geologists as the primary source of natural gem-quality diamonds. The term “transitional kimberlite” was previously introduced to categorize rocks that exhibit bulk geochemical and Sr–Nd isotopic characteristics intermediate between those of archetypal kimberlite (formerly Group-I) and orangeite (formerly Group-II). Nevertheless, the petrogenesis of transitional diamond-bearing kimberlites remains poorly understood due to limited research. The diamondiferous transitional Wafangdian kimberlite in the North China Craton (NCC) thus provides a valuable opportunity for a detailed case study. We investigated fresh hypabyssal transitional Wafangdian kimberlites using bulk-rock major and trace element geochemistry to constrain near-primary parental magma compositions and decipher their petrogenesis. Geochemical compositions identify samples affected by crustal contamination based on elevated SiO₂, Pb, heavy rare earth element (HREE) concentrations, and Sr isotopic ratios. Compositional variations among macrocrystic samples (MgO: 29.7–31.5 wt.%; SiO₂: 30.6–34.7 wt.%; CaO: 3.9–7.5 wt.%; Mg^# [atomic Mg/(Mg + Fe²⁺) × 100]: 85–88) result from substantial entrainment and partial assimilation of peridotite xenoliths (up to 35%). In contrast, variations within aphanitic samples (MgO: 24.0–29.7 wt.%; SiO₂: 27.7–30.9 wt.%; CaO: 6.0–11.8 wt.%; Mg^#: 81–85) are attributed to fractional crystallization of olivine and phlogopite (~1–32%). Based on these constraints, the near-primary parental magma composition for the Wafangdian kimberlite is estimated as ~29.7 wt.% SiO₂, ~29.7 wt.% MgO, and Mg^# 85. Trace element concentrations in the transitional Wafangdian kimberlites resemble those of archetypal kimberlites globally (e.g., Nb/U > 26, La/Nb < 1.4, Ba/Nb < 16, Th/Nb < 0.25), indicating a shared convective mantle source. However, the Wafangdian kimberlites exhibit distinct characteristics: ε_Nd(t) values ranging from −3.44 to −1.77, higher Al₂O₃ and K₂O contents, and lower Ce/Pb ratios (10–20) compared to archetypal kimberlites. These features suggest the mantle source region was profoundly influenced by deeply subducted oceanic material. Full article

Petrological knowledge on weathering processes controlling the mobility of chemical elements is still limited in the dry tropical zone of Cameroon. This study aims to investigate the mobility of major and trace elements during rhyolite weathering and soil formation in Mobono by understanding the mineralogical and elemental vertical variation. The studied soil was classified as Cambisols containing mainly quartz, K-feldspar, plagioclase, smectite, kaolinite, illite, calcite, lepidocrocite, goethite, sepiolite, and interstratified clay minerals. pH values ranging between 6.11 and 8.77 indicated that hydrolysis, superimposed on oxidation and carbonation, is the main process responsible for the formation of secondary minerals, leading to the formation of iron oxides and calcite. The bedrock was mainly constituted of SiO₂, Al₂O₃, Na₂O, Fe₂O₃, Ba, Zr, Sr, Y, Ga, and Rb. Ce and Eu anomalies, and chondrite-normalized La/Yb ratios were 0.98, 0.67, and 2.86, respectively. SiO₂, Al₂O₃, Fe₂O₃, Na₂O, and K₂O were major elements in soil horizons. Trace elements revealed high levels of Ba (385 to 1320 mg kg⁻¹), Zr (158 to 429 mg kg⁻¹), Zn (61 to 151 mg kg⁻¹), Sr (62 to 243 mg kg⁻¹), Y (55 to 81 mg kg⁻¹), Rb (1102 to 58 mg kg⁻¹), and Ga (17.70 to 35 mg kg⁻¹). LREEs were more abundant than HREEs, with LREE/HREE ratio ranging between 2.60 and 6.24. Ce and Eu anomalies ranged from 1.08 to 1.21 and 0.58 to 1.24 respectively. The rhyolite-normalized La/Yb ratios varied between 0.56 and 0.96. Mass balance revealed the depletion of Si, Ca, Na, Mn, Sr, Ta, W, U, La, Ce, Pr, Nd, Sm, Gd and Lu, and the accumulation of Al, Fe, K, Mg, P, Sc, V, Co, Ni, Cu, Zn, Ga, Ge, Rb, Y, Zr, Nb, Cs, Ba, Hf, Pb, Th, Eu, Tb, Dy, Ho, Er, Tm and Yb during weathering along the soil profile. Full article

The article provides a comprehensive analysis of the Magal Gebreel granitic suites (MGGs) using petrological (fieldwork, petrography, mineral chemistry, and bulk rock analysis) aspects to infer their petrogenesis and emplacement setting. Our understanding of the development of the northern portion of the Arabian Nubian Shield is significantly improved by the Neoproterozoic granitic rocks of the seldom studied MGGs in Egypt’s south Eastern Desert. According to detailed field, mineralogical, and geochemical assessments, they comprise syn-collision (granodiorites) and post-collision (monzogranites, syenogranites, and alkali feldspar rocks). Granodiorite has strong positive Pb, notable negative P, Ti, and Nb anomalies, and is magnesian in composition. They have high content of LREEs (light rare-earth elements) compared to HREEs (heavy rare-earth elements) and clear elevation of LFSEs (low-field strength elements; K Rb, and Ba) compared to HFSEs (high-field strength elements; Zr and Nb), which are in accord with the contents of I-type granites from the Eastern Desert. In this context, the granodiorites are indicative of an early magmatic phase that probably resulted from the partial melting of high K-mafic sources in the subduction zone. Conversely, the post-collision rocks have low contents of Mg#, CaO, P₂O₅, MgO, Fe₂O₃, Sr, and Ti, and high SiO₂, Fe₂O₃/MgO, Nb, Ce, and Ga/Al, suggesting A-type features with ferroan affinity. Their P, Nb, Sr, Ba, and Ti negative anomalies are in accord with the findings for Eastern Desert granites of the A2-type. Furthermore, they exhibit a prominent negative anomaly in Eu and a small elevation of LREEs in relation to HREEs. The oxygen fugacity (fO₂) for the rocks under investigation can be calculated using the biotite chemistry. The narrow Fe/(Fe + Mg) ratio range (0.6–0.75) indicates that they crystallized under moderately oxidizing conditions between ~QFM +0.1 and QFM +1. The A-type rocks were formed by the partial melting of a tonalite source (underplating rocks) in a post-collisional environment during the late period of extension via slab delamination. The lithosphere became somewhat impregnated with particular elements as a result of the interaction between the deeper crust and the upwelling mantle. Full article

The Karamaili Granite Belt (KGB) in the southern margin of the Eastern Junggar is the most important tin metallogenic belt in the southwestern Central Asian Orogenic Belt. The plutons in the western part have a close genetic relationship with tin mineralization. The zircon U-Pb ages of the Kamusite, Laoyaquan, and Beilekuduke plutons are 315.1 ± 3.4 Ma, 313.6 ± 2.9 Ma, and 316.5 ± 4.6 Ma, respectively. The plutons have high silica (SiO₂ = 75.53%–77.85%), potassium (K₂O = 4.43%–5.42%), and alkalis (K₂O + Na₂O = 8.17%–8.90%) contents and low ferroan (Fe₂O₃^T = 0.90%–1.48%), calcium, and magnesium contents and are classified as metaluminous–peraluminous, high-potassium, calc-alkaline iron granite. The rocks are enriched in Rb, Th, U, K, Pb, and Sn and strongly depleted in Ba, Sr, P, Eu, and Ti. They have strongly negative Eu anomalies (δEu = 0.01–0.05), 10,000 Ga/Al = 2.87–4.91 (>2.6), showing the geochemical characteristics of A-type granite. The zircon U/Pb ratios indicate that the above granites should be I- or A-type granite, which is generally formed under high-temperature (768–843 °C), low-pressure, and reducing magma conditions. The high Rb/Sr ratio (a mean of 48 > 1.2) and low K/Rb ratio (53.93–169.94) indicate that the tin-bearing plutons have undergone high differentiation. The positive whole-rock εNd(t) values (3.99–5.54) and the relatively young Nd T_2DM model ages (616–455 Ma) suggest the magma is derived from partially melted juvenile crust, and the underplating of basic magma containing mantle materials that affected the source area. The results indicate the KGB was formed in the tectonic transition period in the late Carboniferous subduction post-collision environment. Orogenic compression influenced the tin-bearing plutons in the western part of the KGB, forming highly differentiated and reduced I, A-type transition granite. An extensional environment affected the plutons in the eastern sections, creating A-type granite with dark enclaves that suggest magma mixing with little evidence of tin mineralization. Full article

The South Tianshan records the latest accretionary and collisional events in the southwestern Altaids, but the internal subduction-related processes are controversial. This study provides an integrative analysis of a newly identified Late Carboniferous adakitic granodiorite from the South Tianshan, incorporating geochronological, zircon U-Pb and Lu-Hf isotopic, whole-rock geochemical, and Sr-Nd isotopic data. Zircon U-Pb analysis indicates that the granite was emplaced at 310 ± 2.5 Ma. Based on major element compositions, the granodiorite belongs to medium-K calc-alkaline weakly peraluminous series (A/CNK = 0.95–1.09). The samples exhibit typical high-silica adakitic affinity, as evidenced by the elevated contents of SiO₂ (67.75–69.27 wt.%), Al₂O₃ (15.29–15.90 wt.%), Sr (479–530 ppm), and Ba (860–910 ppm); low concentrations of Yb (0.43–0.47 ppm) and Y (7.12–7.44 ppm); high Sr/Y ratios (67–72); and slight Eu anomalies (δEu = 0.89–1.03). The sodium-rich composition (K₂O/Na₂O = 0.48–0.71) is comparable to adakitic rocks from slab-derived melts. Elevated concentrations of Ni (22.12–24.25 ppm), Cr (33.20–37.86 ppm), Co (6.32–6.75 ppm), and V (30.33–32.48 ppm), along with high Mg# values (55–57), suggest melt–mantle interaction during magma ascent. The slightly enriched isotopic signatures, characterized by higher initial ⁸⁷Sr/⁸⁶Sr ratios (0.706086–0.706205) and lower ε_Nd(t) (−3.09 to –2.47) and ε_Hf(t) (−3.11 to +7.66) values, point to notable sedimentary contributions, potentially through source contamination and/or shallow-level crustal contamination. By integrating the new results with previously published data, we consider that the adakitic granodiorite was generated by partial melting of the subducted oceanic crust, triggered by asthenospheric upwelling associated with the southward rollback of the north-dipping South Tianshan oceanic lithosphere. Our data provide new insights into Late Carboniferous retreating subduction along the southern active margin of the Yili-Central Tianshan and the accretionary architecture of the southern Altaids. Full article

The Late Paleozoic granitoids widely distributed in the central section of the East Kunlun Orogenic Belt (EKOB) are responsible for the constraints on its post-collisional extensional processes. We report the whole-rock geochemical compositions, zircon U-Pb ages, and zircon Hf isotope data of granites in the western Kendewula area. The granites, dated between 413.7 Ma and 417.7 Ma, indicate emplacement during the Early Devonian period. The granite is characterized by high silicon content (72.45–78.96 wt%), high and alkali content (7.59–9.35 wt%), high 10,000 × Ga/Al values, and low Al2O3 (11.29–13.32 wt%), CaO (0.07–0.31 wt%), and MgO contents (0.16–0.94 wt%). The rocks exhibit enrichment in large-ion lithophile element (LILE) content and high-field-strength element (HFSE) content, in addition to strong losses, showing significant depletion in Ba, Sr, P and Eu. These geochemical characteristics correspond to A2-type granites. The values of Rb/N and Ba/La and the higher zircon saturation temperature (800~900 °C) indicate that the magma source is mainly crustal, with the participation of mantle materials, although limited. In addition, the zircon εHf(t) values (−4.3–3.69) also support this view. In summary, the A2-type granite exposed in the western Kendewula region formed against a post-collisional extensional setting background, suggesting that the Southern Kunlun Terrane (SKT) entered a post-orogenic extensional phase in the evolution stage since the Early Devonian. The upwelling of the asthenospheric mantle of the crust, triggered by crustal detachment and partial melting, likely contributed to the flare-up of A2-type granite during this period. By studying the nature of granite produced during orogeny, the evolution process of the formation of orogenic belts is discussed, and our understanding of orogenic is enhanced. Full article

Haigou deposit, located in Dunhua City, southeast Jilin Province, NE China, is a large-scale gold deposit. The gold ore body is categorized into two types: quartz-vein type and altered rock type, with the quartz-vein type being predominant. The vein gold ore body primarily occurs within the monzonite granite and monzonite rock mass in the Haigou area and is controlled by fault structures trending northeast, northwest, and near north-south. In order to constrain the age and tectonic setting of quartz vein-type gold mineralization, we conducted a detailed underground investigation and collected samples of monzonite granite and pyroxene diorite porphyrite veins related to quartz-vein-type gold mineralization for LA-ICP-MS zircon U-Pb dating and whole-rock main trace element data testing to confirm that monzonite granite is closely related to gold mineralization. Pyroxene diorite porphyry and gold mineralization were found in parallel veins. The zircon U-Pb weighted mean ages of monzonite and pyroxene diorite porphyrite veins are 317.1 ± 3.5 Ma and 308.8 ± 3.0 Ma, respectively, indicating that gold mineralization in monzonite, pyroxene diorite porphyrite veins, and quartz veins occurred in the Late Carboniferous. The monzonite granite and pyroxene diorite porphyrite veins associated with quartz vein-type gold mineralization have high SiO₂, high K, and high Al₂O₃ and are all metaluminous high-potassium calc-alkaline rock series. Both of them are relatively enriched in light rare earth elements (LREE) and macroionic lithophile elements (LILE: Rb, Ba, K, etc.), but deficient in heavy rare earth elements (HREE) and high field strength elements (HFSE: Nb, Ta, P, Ti, etc.), the monzonitic granite Eu is a weak positive anomaly (δEu = 1.15–1.46), the pyroxene diorite porphyre dyke Eu is a weak positive anomaly (δEu = 1.09–1.13), and the Nb and Ta are negative anomalies. The Th/Nb values are 0.28–0.73 and 1.48–2.05, and La/Nb are 2.61–4.74 and 4.59–5.43, respectively, suggesting that diagenetic mineralization is the product of subduction in an active continental margin environment. In recent years, scholarly research on Sr, Nd, and Pb isotopes in Haigou rock masses has indicated that the magmatic source region in the Haigou mining areas is complex. It is neither a singular crustal source nor a mantle source but rather a mixed crust-mantle source, primarily resulting from the partial melting of lower crustal materials, with additional contributions from mantle-derived materials. In summary, the metallogenic characteristics, chronology data, geochemical characteristics, and regional tectonic interpretation indicate that at least one phase of magmatic-hydrothermal gold mineralization was established in the Late Carboniferous as a result of the subduction of the Paleo-Asian ocean plate at the northern margin of the North China Craton. Full article

The introduction of alkaline earth oxides into Li₂O-Al₂O₃-SiO₂ glass components can improve the mechanical and optical performances of glass and glass–ceramics for various applications. In this research, microstructures, thermal properties, crystallization behavior, and mechanical performance changes in specific Li₂O-Al₂O₃-SiO₂ glass with the introduction of different alkali earth oxides, MgO, CaO, SrO, and BaO, were investigated. From Raman and NMR spectra microstructure analysis, it was confirmed that the addition of MgO could compete with Al as a network former and charge compensator, while increasing the bridging oxygen number with Si and affecting the chemical shift in ²⁹Si. Meanwhile, the glass structures slightly changed due to the introduction of CaO, SrO, and BaO, with larger ionic radii. Meanwhile, the glass transition and first crystallization temperatures increased due to MgO introduction and then decreased with larger-radii alkali earth oxides’ addition, due to different glass network connectivity. After heat treatment, the crystal phases in the glass–ceramics changed with the introduction of alkaline earth oxides. The main crystal phases varied from Li₂Si₂O₅, SiO₂, and LiAlSi₄O₁₀ in glass without alkali earth oxide introduction; to SiO₂, Li_xAl_xSi_3−xO₆, and MgAl₂Si₄O₁₂ in glass with MgO addition; to SiO₂ and Li_xAl_xSi_3−xO₆ with CaO addition; to SiO₂, LiAlSi₄O₁₀, and Li₂SiO₃ for glass with SrO addition; and further to Li₂SiO₅, SiO₂, and LiAlSi₄O₁₀ for glass with BaO addition. Moreover, in the mechanical performance of the glass–ceramics, the Vickers hardness and elastic modulus reached a maximum of 8.61 GPa for glass with MgO and 90.12 GPa for glass with BaO modification, respectively, probably due to different crystal phases. More importantly, the crack resistance values presented a large increase for MgO glass and MgO- or CaO-modified glass–ceramics. Full article

The Kongco area of Nima in the northern part of the Lhasa terrane has a suite of alkaline granitic porphyry dykes associated with Early Cretaceous granites and accompanied by Cu/Mo mineralization. LA-ICP-MS ²⁰⁶Pb/²³⁸U zircon geochronology performed on the dykes produced an age of 104.15 ± 0.94 Ma (MSWD = 0.98), indicating the Early Cretaceous emplacement of the dykes. The dykes exhibit high silica (SiO₂ = 76.22~77.90 wt.%), high potassium (K₂O = 4.97~6.21 wt.%), high alkalinity (K₂O + Na₂O = 8.07~8.98 wt.%), low calcium (CaO = 0.24~0.83 wt.%), low magnesium (MgO = 0.06~0.20 wt.%), and moderate aluminum content (Al₂O₃ = 11.93~12.45 wt.%). The Rieterman index (σ) ranges from 1.93 to 2.34. A/NK (molar ratio Al₂O₃/(Na₂O + K₂O)) and A/CNK (molar ratio Al₂O₃/(CaO + Na₂O + K₂O)) values of the dykes range from 1.06 to 1.18 and 0.98 to 1.09, respectively. The dykes are relatively enriched in Rb, Th, U, K, Ta, Ce, Nd, Zr, Hf, Sm, Y, Yb, and Lu, and they show a noticeable relative depletion in Ba, Nb, Sr, P, Eu, and Ti, as well as an average differentiation index (DI) of 96.42. The dykes also exhibit high FeO_T/MgO ratios (3.60~10.41), Ga/Al ratios (2.22 × 10⁻⁴~3.01 × 10⁻⁴), Y/Nb ratios (1.75~2.40), and Rb/Nb ratios (8.36~20.76). Additionally, they have high whole-rock Zr saturation temperatures (884~914 °C), a pronounced Eu negative anomaly (δEu = 0.04~0.23), and a rightward-sloping “V-shaped” rare earth element pattern. These characteristics suggest that the granitic porphyry dykes can be classified as A2-type granites formed in a post-collisional tectonic environment and that they are weakly peraluminous, high-potassium, and Calc-alkaline basaltic rocks. Positive ε_Hf(t) values = 0.43~3.63 and a relatively young Hf crustal model age (T_DM2 = 826~1005 Ma, ⁸⁷Sr/⁸⁶Sr ratios = 0.7043~0.7064, and ε_Nd(t) = −8.60~−2.95 all indicate lower crust and mantle mixing. The lower crust and mantle mixing model is also supported by (²⁰⁶Pb/²⁰⁴Pb)t = 18.627~18.788, (²⁰⁷Pb/²⁰⁴Pb)t = 15.707~15.719, (²⁰⁸Pb/²⁰⁴Pb)t = 39.038~39.110). Together, the Hf, Sr and Pb isotopic ratios indicate that the Kongco granitic porphyry dykes where derived from juvenile crust formed by the addition of mantle material to the lower crust. From this, we infer that the Kongco granitic porphyry dykes are related to a partial melting of the lower crust induced by subduction slab break-off and asthenospheric upwelling during the collision between the Qiangtang and Lhasa terranes and that they experienced significant fractional crystallization dominated by potassium feldspar and amphibole. These dykes are also accompanied by significant copper mineralization (five samples, copper content 0.2%), suggesting a close relationship between the magmatism associated with these dykes and regional metallogenesis, indicating a high potential for mineral exploration. Full article

This study deals with the reconstruction of the paleoenvironment and the paleoclimate situation of the middle–upper Eocene sediments in the northwest Fayum area. The reconstruction is based on comprehensive stratigraphical and geochemical analyses of major oxides and trace elements for selected sediment samples from the Gehannam Formation (Bartonian–Priabonian), the Birket Qarun and the Qasr El Sagha formations (Priabonian). The sedimentological features coupled with paleo-redox trace elemental ratios (Ni/Co, V/Cr, U/Th, V/(V + Ni), and Cu/Zn), paleosalinity (Sr/Ba, Mg/Al ×100, Ca/Al), and paleowater depth (Fe/Mn) proxies, indicate that deposition took place in a shallow marine agitated environment with high oxygen levels. Paleoclimate indicators (Sr/Cu, Rb/Sr, K₂O₃/Al₂O₃, Ga/Rb, C-value, CIA, and CIW) suggest warm and prevailing arid climatic conditions, with minor humid periods at some intervals. The observed low values of the total organic carbon (TOC) are attributed to significant high sediment influx, predominant oxygenated conditions, and poor primary productivity, which is further confirmed by low values of paleoprimary productivity proxies (P, Ni/Al, Cu/Al, P/Al and P/Ti, and Ba_bio ratios). These findings enhance our understanding of the Eocene environments and provide insights into sedimentation processes during this period. Full article