Search Results (1,102)

Ischemic stroke is a primary cause of cerebrovascular diseases and continues to be one of the leading causes of death and disability among patients worldwide. Pathological processes caused by vascular damage due to stroke occur in a time-dependent manner and are classified into three categories: acute, subacute, and chronic. Current treatments for ischemic stroke are limited to effectiveness in the early stages. In this study, we investigated the therapeutic effect of an oriental medicine, Gosha-jinki-gan (TJ107), on improving chronic ischemic stroke using the mouse model with middle cerebral artery occlusion (MCAO). The changes in the intracerebral inflammatory response (macrophages (F4/80), TLR2•4, IL-23, IL-17, TNF-α, and IL-1β) were examined using real-time RT-PCR. The MCAO mice showed the increased expression of glial fibrillary acidic protein (GFAP) and of F4/80, TLR2, TLR4, IL-1β, TNF-α, and IL-17 in the brain tissue from the MCAO region. This suggests that they contribute to the expansion of the ischemic stroke infarct area and to the worsening of the neurological symptoms of the MCAO mice in the chronic phase. On the other hand, the administration of TJ107 was proven to reduce the infarct area, with decreased GFAP expression, suppressed macrophage infiltration in the brain, and reduced TNF-α, IL-1β, and IL-17 production compared with the MCAO mice. This study first demonstrated Gosha-jinki-gan’s therapeutic effects on the chronic ischemic stroke. Full article

Dexamethasone, widely used as an exogenous glucocorticoid in clinical and animal practice, has recently been recognized as an environmental contaminant of concern. Existing evidence documents its ability to induce persistent dyslipidemia in adult offspring. In this study, plasma cholesterol levels in male rats exposed to dexamethasone prenatally (PDE) were increased. Meanwhile, developmental tracking revealed a reduction in hepatic low-density lipoprotein receptor (LDLR) promoter H3K27 acetylation (H3K27ac) and corresponding transcriptional activity across gestational-to-postnatal stages. Mechanistic investigations established glucocorticoid receptor/histone deacetylase2 (GR/HDAC2) axis-mediated epigenetic programming of LDLR through H3K27ac modulation in PDE offspring, potentiating susceptibility to hypercholesterolemia. Additionally, in peripheral blood mononuclear cells (PBMC) of PDE male adult offspring, LDLR H3K27ac level and expression were also decreased and positively correlated with those in the liver. Clinical studies further substantiated that male newborns prenatally treated with dexamethasone exhibited increased serum cholesterol levels and consistent reductions in LDLR H3K27ac levels and corresponding transcriptional activity in PBMC. This study establishes a complete evidence chain linking PDE with epigenetic programming and cholesterol metabolic dysfunction, proposing PBMC epigenetic biomarkers as a novel non-invasive monitoring tool for assessing the developmental toxicity of chemical exposures during pregnancy. This has significant implications for improving environmental health risk assessment systems. Full article

Mitochondria are central to energy production and redox regulation in spermatozoa, supporting key functions such as progressive motility, capacitation, and the acrosome reaction. These processes are essential for successful fertilization and embryo development. However, species-specific differences exist in the reliance on oxidative phosphorylation versus glycolysis. Mitochondria also generate reactive oxygen species, which at physiological levels aid in sperm function but can cause oxidative stress and damage when overproduced. Mitochondrial dysfunction and excessive ROS can impair membrane potential, induce apoptosis, and damage nuclear and mitochondrial DNA, ultimately compromising sperm quality. Sperm mitochondrial DNA is highly susceptible to mutations and deletions, contributing to reduced motility and fertility. Targeted antioxidant strategies have emerged as promising therapeutic interventions to mitigate oxidative damage. This article provides a comprehensive overview of mitochondrial regulation in spermatozoa, the consequences of redox imbalance, and the potential of mitochondria-targeted antioxidants to improve sperm function and male fertility outcomes. The paper aims to deepen our understanding of mitochondrial roles in sperm physiology and contribute to the advancement of strategies for addressing male infertility. Full article

Soil salinity adversely affects crop growth and development, leading to reduced soil fertility and agricultural productivity. The indigenous salt-tolerant plant growth-promoting rhizobacteria (PGPR), as a sustainable microbial resource, do not only promote growth and alleviate salt stress, but also improve the soil microecology of crops. The strain H5 isolated from saline-alkali soil in Bachu of Xinjiang was studied through whole-genome analysis, functional annotation, and plant growth-promoting, salt-tolerant trait gene analysis. Phylogenetic tree analysis and 16S rDNA sequencing confirmed its classification within the genus Halomonas. Functional annotation revealed that the H5 genome harbored multiple functional gene clusters associated with plant growth promotion and salt tolerance, which were critically involved in key biological processes such as bacterial survival, nutrient acquisition, environmental adaptation, and plant growth promotion. The pot experiment under moderate salt stress demonstrated that seed inoculation with Halomonas sp. H5 not only significantly improved the agronomic traits of tomato seedlings, but also increased plant antioxidant enzyme activities under salt stress. Additionally, soil analysis revealed H5 treatment significantly decreased the total salt (9.33%) and electrical conductivity (8.09%), while significantly improving organic matter content (11.19%) and total nitrogen content (10.81%), respectively (p < 0.05). Inoculation of strain H5 induced taxonomic and functional shifts in the rhizosphere microbial community, increasing the relative abundance of microorganisms associated with plant growth-promoting and carbon and nitrogen cycles, and reduced the relative abundance of the genera Alternaria (15.14%) and Fusarium (9.76%), which are closely related to tomato diseases (p < 0.05). Overall, this strain exhibits significant potential in alleviating abiotic stress, enhancing growth, improving disease resistance, and optimizing soil microecological conditions in tomato plants. These results provide a valuable microbial resource for saline soil remediation and utilization. Full article

The Carbon Emissions Trading System (ETS) serves as a market-based mechanism to drive renewable energy (RE) investments, yet its heterogeneous impacts on different stakeholders remain underexplored. This paper treats the carbon market as an exogenous shock and develops a multi-agent equilibrium model incorporating carbon pricing, encompassing power generation enterprises, power transmission enterprises, power consumers, and the government, to analyze how carbon prices reshape RE investment layouts under dual-carbon goals. Using panel data from Zhejiang Province (2017–2022), a high-energy-consumption region with 25% net electricity imports, we simulate heterogeneous responses of agents to carbon price fluctuations (CNY 50–250/ton). The results show that RE on-grid electricity increases (+0.55% to +2.89%), while thermal power declines (–4.98% to −15.39%) on the generation side. Transmission-side RE sales rise (+3.25% to +9.74%), though total electricity sales decrease (−0.49% to −2.22%). On the consumption side, RE self-generation grows (+2.12% to +5.93%), yet higher carbon prices reduce overall utility (−0.44% to −2.05%). Furthermore, external electricity integration (peaking at 28.5% of sales in 2020) alleviates provincial entities’ carbon cost pressure under high carbon prices. This study offers systematic insights for renewable energy investment decisions and policy optimization. Full article

Fenton oxidation can contribute to meeting effluent standards for COD in actual wastewater treatment plant effluents. However, Fenton oxidation is prone to produce iron sludge waste. The application of heterogeneous Fenton-like systems based on Fenton iron mud carbon in wastewater treatment plants is essential for Fenton iron mud reduction and recycling. In this study, a Fenton iron mud carbon catalyst/Ferrate salts/H₂O₂ (FSC/Fe(VI)/H₂O₂) system was developed to remove chemical oxygen demand (COD) from secondary effluents at the pilot scale. The results showed that the FSC/Fe(VI)/H₂O₂ system exhibited excellent COD removal performance with a removal rate of 57% under slightly neutral conditions in laboratory experiments. In addition, the effluent COD was stabilized below 40 mg·L⁻¹ for 65 days at the pilot scale. Fe(IV) and ¹O₂ were confirmed to be the main active species in the degradation process through electron paramagnetic resonance (EPR) and quenching experiments. C=O, O-C=O, N sites and Fe⁰ were responsible for the generation of Fe(IV) and ¹O₂ in the FSC/Fe(VI)/H₂O₂ system. Furthermore, the cost per ton of water treated by the pilot-scale FSC/Fe(VI)/H₂O₂ system was calculated to be only 0.6209 USD/t, further confirming the application potential of the FSC/Fe(VI)/H₂O₂ system. This study promotes the engineering application of heterogeneous Fenton-like systems for water treatment. Full article

Global building energy consumption is significantly increasing. Utilizing renewable energy sources may be an effective approach to achieving low-carbon and energy-efficient buildings. A combined system incorporating solar photovoltaic–thermal (PV/T) components with an air-source heat pump (ASHP) was studied for simultaneous heating and power generation in a real residential building. The back panel of the PV/T component featured a novel polygonal Freon circulation channel design. A prototype of the combined heating and power supply system was constructed and tested in Fuzhou City, China. The results indicate that the average coefficient of performance (COP) of the system is 4.66 when the ASHP operates independently. When the PV/T component is integrated with the ASHP, the average COP increases to 5.37. On sunny days, the daily average thermal output of 32 PV/T components reaches 24 kW, while the daily average electricity generation is 64 kW·h. On cloudy days, the average daily power generation is 15.6 kW·h; however, the residual power stored in the battery from the previous day could be utilized to ensure the energy demand in the system. Compared to conventional photovoltaic (PV) systems, the overall energy utilization efficiency improves from 5.68% to 17.76%. The hot water temperature stored in the tank can reach 46.8 °C, satisfying typical household hot water requirements. In comparison to standard PV modules, the system achieves an average cooling efficiency of 45.02%. The variation rate of the system’s thermal loss coefficient is relatively low at 5.07%. The optimal water tank capacity for the system is determined to be 450 L. This system demonstrates significant potential for providing efficient combined heat and power supply for buildings, offering considerable economic and environmental benefits, thereby serving as a reference for the future development of low-carbon and energy-saving building technologies. Full article

Conventional trenchless pipeline rehabilitation technologies are primarily designed for circular pipelines, with limited applicability to box culvert structures. Even when adapted, these methods often lead to significant reductions in the effective cross-sectional area and fail to enhance the structural load-bearing capacity due to geometric incompatibilities. To overcome these limitations, this study proposes a novel construction approach that employs prefabricated high-strength thin concrete segment liners for the reinforcement of underground box culverts. The feasibility of this method was validated through full-scale (1:1) experimental construction in a purpose-built test culvert, demonstrating rapid and efficient installation. A static stacking load test was subsequently conducted on the reinforced upper section of the culvert. Results indicate that the proposed reinforcement method effectively restores structural integrity and satisfies load-bearing and serviceability requirements, even after removal of the original roof slab. Additionally, a finite element analysis was performed to simulate the stacking load test conditions. The simulation revealed that variations in the mechanical properties of the grout between the existing structure and the new lining had minimal impact on the internal force distribution and deformation behavior of the prefabricated segments. The top segment consistently exhibited semi-rigid fixation behavior. This study offers a promising strategy for the rehabilitation of urban underground box culverts, achieving structural performance recovery while minimizing traffic disruption and enhancing construction efficiency. Full article

Transpiration is the dominant process driving water loss in crops, significantly influencing their growth, development, and yield. Efficient monitoring of transpiration rate (Tr) is crucial for evaluating crop physiological status and optimizing water management strategies. The three-temperature (3T) model has potential for rapid estimation of transpiration rates, but its application to low-altitude remote sensing has not yet been further investigated. To evaluate the performance of 3T model based on land surface temperature (LST) and canopy temperature (T_C) in estimating transpiration rate, this study utilized an unmanned aerial vehicle (UAV) equipped with a thermal infrared (TIR) camera to capture TIR images of summer maize during the nodulation-irrigation stage under four different moisture treatments, from which LST was extracted. The Gaussian Hidden Markov Random Field (GHMRF) model was applied to segment the TIR images, facilitating the extraction of T_C. Finally, an improved 3T model incorporating fractional vegetation coverage (FVC) was proposed. The findings of the study demonstrate that: (1) The GHMRF model offers an effective approach for TIR image segmentation. The mechanism of thermal TIR segmentation implemented by the GHMRF model is explored. The results indicate that when the potential energy function parameter β value is 0.1, the optimal performance is provided. (2) The feasibility of utilizing UAV-based TIR remote sensing in conjunction with the 3T model for estimating Tr has been demonstrated, showing a significant correlation between the measured and the estimated transpiration rate (T_r-3T_C), derived from T_C data obtained through the segmentation and processing of TIR imagery. The correlation coefficients (r) were 0.946 in 2022 and 0.872 in 2023. (3) The improved 3T model has demonstrated its ability to enhance the estimation accuracy of crop Tr rapidly and effectively, exhibiting a robust correlation with T_r-3T_C. The correlation coefficients for the two observed years are 0.991 and 0.989, respectively, while the model maintains low RMSE of 0.756 mmol H₂O m⁻² s⁻¹ and 0.555 mmol H₂O m⁻² s⁻¹ for the respective years, indicating strong interannual stability. Full article

Graphene exhibits exceptional electronic properties, superior mechanical strength, and remarkable flexibility, driving significant advances in flexible electronics. However, achieving high-precision patterned graphene via in situ fabrication for such applications remains challenging, limiting the development of graphene-based flexible devices. In this study, we successfully synthesized patterned graphene with high precision by substrate surface oxidation technology. The effect of substrate surface oxidation on patterned graphene growth was deeply investigated. By regulating the oxidation time, we precisely controlled the oxidation degree of the substrate and characterized the boundary precision between oxidized and unoxidized regions. Finally, we achieved the high-precision in situ fabrication of patterned graphene with a feature size of 0.5 μm on selectively oxidized substrates. Furthermore, we fabricated a flexible fluorescent device based on patterned graphene, demonstrating the pronounced fluorescence quenching effect of graphene (I_Gr-free/I_Gr-cov ≈ 3). Full article

Port green spaces are essential protective barriers, enhancing safety and environmental resilience in high-activity port regions. Given the intensity of human activities in these areas, understanding the factors influencing the carbon sequestration capacity and ecological benefits of port green spaces is crucial for developing sustainable green ports. This study integrated field investigations and remote sensing data to estimate carbon density and carbon sequestration capacity in the Dongjiakou Port area, examining their relationship with port green space planning. The results indicated that carbon density in green spaces showed a significant negative correlation with the number of lanes in adjacent roads, where an increase in lane numbers corresponded to lower carbon density. Additionally, carbon density decreased significantly with increasing distance from the shipping center. In contrast, a significant positive correlation was observed between carbon density and distance from large water bodies, indicating that green spaces closer to large water bodies exhibited smaller carbon density. Infrastructure development in Dongjiakou substantially negatively impacted vegetation carbon sequestration capacity, with effects not reversible in the short term. However, green space enhancement efforts provided additional ecological benefits, leading to a 50.9 ha increase in green space area. When assessing carbon density in urbanizing areas, geographical influences should be prioritized. Furthermore, the long-term environmental impacts of urban expansion must be considered at the early planning stages, ensuring the implementation of proactive protective measures to mitigate potential ecological disruptions. Full article

Rock slopes exhibiting anti-inclined interbedded strata have widespread distribution and complex deformation mechanisms. In this study, we used a physical model test with basal friction to replicate the evolution process of the slope deformation. Digital Image Correlation (DIC) and Particle Image Velocimetry (PIV) methods were used to capture the variation in slope velocity and displacement fields. The results show that the slope deformation is conducted by bending of soft rock layers and accumulated overturning of hard blocks along numerous cross joints. As the faces of the rock columns come back into contact, the motion of the slope can progressively stabilize. Destruction of the toe blocks triggers the formation of the landslides within the toppling zone. The toppling fracture zones form by tracing tensile fractures within soft rocks and cross joints within hard rocks, ultimately transforming into a failure surface which is located above the hinge surface of the toppling motion. The evolution of the slope deformation mainly undergoes four stages: the initial shearing, the free rotation, the creep, and the progressive failure stages. Full article

In enzymatic reaction glucose detection chips, the enzyme can easily dislodge from the electrode, which harms both the chip and test stability. Additionally, enzyme activity significantly decreases at low temperatures. Consequently, immobilizing the enzyme at the appropriate substrate and ambient temperature is a critical step for improving the chip. To address this issue, an electrochemical detection chip was modified using the nanomaterial MXene, known for its large specific surface area, excellent adsorption, good dispersion, and high conductivity. Meanwhile, AgNO₃ solution was added to the Ti₃C₂T_x MXene nanosheet solution, and the AgNP@MXene material was prepared by heating in a water bath. This process further enhances photothermal conversion efficiency due to the localized surface plasmon resonance effect of silver nanoparticles and MXene. This MXene-based photothermally enhanced paper chip exhibits outstanding photothermal conversion performance and sensitive photoelectrochemical responsiveness, along with good cycling stability. Moreover, improved glucose detection sensitivity at low winter temperatures has been achieved, and the ambient temperature range of the paper chip has been expanded to 25–37 °C. Full article

Soybeans are a primary source of plant-based protein, with seeds containing approximately 40% protein—a key quality trait. Selecting superior hybrid combinations and managing progeny effectively are crucial for developing high-protein soybean varieties. Using a recombinant inbred line population (RIL3613) derived from Dongnong L13 × Heihe 36 and its previously constructed high-density genetic linkage map, QTLs and QTL × environment interactions (QEIs) associated with seed protein content (SPC) were identified through the bi-parental population (BIP) model and multi-environment trials (MET) model in QTL IciMapping v4.2. Candidate genes were then predicted via sequence alignment and haplotype analysis between the parents. Finally, simulated breeding was conducted using the B4L function in the In Silico Breeding (ISB) module of the Blib platform to determine optimal breeding strategies across diverse environments. The analysis identified 19 QTLs associated with SPC and 97 QEIs linked to SPC. These QTLs collectively explained 84.442% of the phenotypic variance, with four QTLs exhibiting significant contributions. A key candidate gene, Glyma.12G231400, associated with soybean SPC, was predicted within the 38,995,090–39,293,825 bp interval on chromosome 12. Across 11 environments, three to six optimal breeding schemes were selected, all employing modified pedigree selection. These findings enhance our understanding of the genetic basis of soybean protein formation and provide technological support for molecular breeding for seed quality improvement. Full article

Accurate acquisition of the phenotypic information of trunk-shaped fruit trees plays a crucial role in intelligent orchard management, pruning during dormancy, and improving fruit yield and quality. However, the precise segmentation of trunks and branches remains a significant challenge, limiting the accurate measurement of phenotypic parameters and high-precision pruning of branches. To address this issue, a novel adaptive cuboid regional growth segmentation algorithm is proposed in this study. This method integrates a growth vector that is adaptively adjusted based on the growth trend of branches and a growth cuboid that is dynamically regulated according to branch diameters. Additionally, an innovative reverse growth strategy is introduced to enhance the efficiency of the growth process. Furthermore, the algorithm can automatically and effectively identify the starting and ending points of growth based on the structural characteristics of fruit tree branches, solving the problem of where to start and when to stop. Compared with PointNet++, PointNeXt, and Point Transformer, ACRGS achieved superior performance, with F₁-scores of 95.75% and 96.21% and mIoU values of 0.927 and 0.933 for apple and cherry trees. The results show that the method enables high-precision and efficiency trunk–branch segmentation, providing data support for fruit tree phenotypic parameter extraction and pruning. Full article