Search Results (83)

Avian influenza A viruses (IAVs) pose a persistent threat to the poultry industry, causing substantial economic losses. Although traditional vaccines have helped reduce the disease burden, they typically rely on multivalent antigens, emphasize humoral immunity, and require intensive production. This study aimed to establish a genetically matched host–cell system to evaluate antigen-specific immune responses and identify conserved CD8+ T cell epitopes in avian influenza viruses. To this end, we developed an MHC class I genotype (B21)-matched host (Lohmann VALO SPF chicken) and cell vector (DF-1 cell line) model. DF-1 cells were engineered to express the hemagglutinin (HA) gene of clade 2.3.4.4b H5N1 either transiently or stably, and to stably express the matrix 1 (M1) and nucleoprotein (NP) genes of A/chicken/South Korea/SL20/2020 (H9N2, Y280-lineage). Following prime-boost immunization with HA-expressing DF-1 cells, only live cells induced strong hemagglutination inhibition (HI) and virus-neutralizing (VN) antibody titers in haplotype-matched chickens. Importantly, immunization with DF-1 cells transiently expressing NP induced stronger IFN-γ production than those expressing M1, demonstrating the platform’s potential for differentiating antigen-specific cellular responses. CD8+ T cell epitope mapping by mass spectrometry identified one distinct MHC class I-bound peptide from each of the HA-, M1-, and NP-expressing DF-1 cell lines. Notably, the identified HA epitope was conserved in 97.6% of H5-subtype IAVs, and the NP epitope in 98.5% of pan-subtype IAVs. These findings highlight the platform’s utility for antigen dissection and rational vaccine design. While limited by MHC compatibility, this approach enables identification of naturally presented epitopes and provides insight into conserved, functionally constrained viral targets. Full article

Chestnut honey has various benefits, such as antioxidative, anti-inflammatory, immunomodulatory, antibacterial, and antiviral effects. However, the effects of chestnut honey or the ethyl acetate fraction of chestnut honey (EACH) on neurodegenerative diseases and their related cognitive impairment and neurotoxicity have not yet been established. Therefore, in this study, we investigated the mitigating effect of the EACH on scopolamine (SCO)-injected cognitive decline in mice and glutamate-exposed neurotoxicity in HT22 cells. EACH administration significantly reversed SCO-induced cognitive decline in mice, as demonstrated through the Morris water maze and passive avoidance tests. The EACH treatment showed a significant alleviation effect by recovering more than 80% of the cell viability decrease induced by glutamate exposure in the HT22 neuronal cell model. Furthermore, the EACH significantly reduced reactive oxygen species accumulation, lactate dehydrogenase release, mitochondrial depolarization, and neuronal apoptosis. The EACH regulated the level of apoptosis-related proteins, induced the nuclear translocation of nuclear factor-E2-related factor 2 (Nrf-2) and the expression of related antioxidant proteins, and induced the phosphorylation of tropomyosin-related kinase receptor B (TrkB)/cAMP-calcium response element-binding protein (CREB) and the expression of brain-derived neurotrophic factor. These data indicate that the EACH can prevent neurons from oxidative damage and improve cognitive dysfunction by activating Nrf-2 and TrkB/CREB signaling pathways. Therefore, the EACH demonstrates potential therapeutic value in mitigating oxidative stress-induced neurotoxicity, cognitive decline, and related neurodegenerative diseases. Full article

When compared to natural graphite, artificial graphite has advantages such a longer cycle life, faster charging rates, and better performance. However, the process of producing it, which frequently uses coal, raises questions about the impact on the environment and the depletion of resources. Eco-friendly, wood-based graphite must be developed in order to solve these problems. This study assessed and investigated the characteristics of charcoals derived from bamboo and oak which were utilized to produce graphite. After heating to 1500 °C at 10 K/min, 86.87 wt% of oak charcoal and 88.33 wt% of bamboo charcoal remained, indicating a yield of more than 85% when charcoal was graphitized. Depending on the species of wood, different-sized pores showed different shapes as the graphitization process advanced, as revealed by SEM surface analyses. The carbon atoms seen in the XRD crystal development changed into graphite crystals when heated to 2400 °C, and the isotropic peaks vanished. Bamboo charcoal has a higher degree of crystallinity than other wood-based charcoals, such as oak charcoal, which is made up of turbostratic graphite, according to Raman spectroscopic research. Lithium-ion batteries employ bamboo charcoal as their anode material. At this point, the values for soft carbon were determined to be 196 mAh/g and for hard carbon to be 168 mAh/g at a current density of 0.02 A/g. Full article

In order to explore the potential of biochar produced from poultry manure for sustainable waste utilization, carbon sequestration, and agricultural development, this study examines the impact of biochar on the growth of the halophyte plant Salicornia herbacea L., or glasswort. Because of their properties of morphological and chemical properties, biochar has been gaining interest as a potential solution to addressing both the concerns of climate change and unsustainable agriculture. In this study, the characteristics of biochar were analyzed and its impact on plant growth by stem length was measured over 15 weeks. Poultry-based biochar was created through pyrolysis at the temperatures of 400, 500, and 700 °C. Various amounts of biochar produced from pyrolysis at 500 °C were put to soil. However, the average surface area and average pore size values of poultry manure biochar produced from temperatures 400, 500, and 700 °C were similar enough to be negligible. The biochar sample produced from the pyrolysis temperature of 500 °C had an average pore size of 17.18 nm and a surface area of 18.06 m²/g. From weeks 4 to 15, all groups exhibited increased stem length, with the most significant differences observed between the biochar 0% (control) and biochar 10% groups, with biochar 0% and biochar 10% denoting 0% and 10% weight concentrations of biochar, respectively. While biochar 5% and biochar 7% groups showed minimal differences in stem length, biochar 10% demonstrated a significant increase, suggesting an optimal biochar percentage for enhancing plant growth. Carbon credit estimations have suggested that 1 ton of poultry manure biochar produced from pyrolysis at 500 C° equates to an estimate of 0.5248 ± 0.0580 carbon credits, the highest of all three biochar samples. All three samples (biochar produced from 400, 500, and 700 °C pyrolysis temperatures) had increased heavy metal contents and a wider range of functional groups. The findings indicate that biochar can effectively improve soil health and plant performance overall, with biochar 10% showing the most significant impact on Salicornia growth. Full article

This study investigated the potential of biochar as a sustainable material for waste utilization and carbon sequestration in soil. Biochar was prepared from cow manure (CM) and applied to the soil. Biochar was processed by subjecting CM to various temperature ranges (400 [CMB400], 550 [CMB550], and 700 °C [CMB700]) under nitrogen gas (allowed to flow to restrict oxygen), with residence time set to 3 h. The characteristics of the biochar produced at each temperature were analyzed. The experiment was conducted for approximately 15 weeks with the laboratory temperature maintained between 24 and 26 °C. The growth rate of plants was obtained by measuring their length weekly, starting 4 weeks after crop establishment. CMB550 exhibited the highest specific surface area (117.57 m² g⁻¹) and well-distributed pore size; therefore, it was mixed with the soil at a specific ratio and put in pots for the planting of Salicornia herbacea L. (glasswort) in the laboratory. The results demonstrated that adding biochar to soil increased plant growth and that the biochar could store organic carbon. In addition, an investigation of heavy metals demonstrated that samples with biochar had lower heavy metal concentrations in glasswort than those without because of the potential of biochar to adsorb heavy metals. By interacting with heavy metal ions in soil solution, the reactive sites and functional groups on the surface of biochar immobilize them and lessen their potentially detrimental effects on plant growth. Overall, biochar has the potential to be a valuable resource for waste management and environmental improvement. Full article

The study explored the graphitization of wood through two distinct methods: a high-temperature approach at 2400 °C and a low-temperature technique at 1400 °C using a catalyst. The graphitization properties were assessed by conducting thermal experiments at various temperatures (1100 °C, 1400 °C, 1800 °C, 2000 °C, and 2400 °C), both with and without a catalyst. The development of graphite lattices was quantitatively analyzed using an array of techniques: X-ray diffractometer (XRD), Raman spectroscopy, high-resolution transmission electron microscopy (HR-TEM), and Fourier transform infrared spectroscopy (FTIR). The XRD analysis highlighted temperature-dependent changes in lattice parameters (d₀₀₂, L_a, and L_c), while Raman spectroscopy tracked alterations in the D to G peak ratio (D/G) with temperature. An increase in temperature is correlated with a rise in the number of graphene layers and the degree of graphitization. Notably, the process of graphite lattice formation varied across the experimental temperature spectrum. The use of a catalyst resulted in a reduced d₀₀₂ spacing, signifying an enhanced degree of graphitization. Moreover, the catalyst promoted a consistent and smooth graphitization process throughout the heating stages. In contrast, graphitization without a catalyst occurred at higher temperatures, specifically between 1800 °C and 2000 °C, with the d₀₀₂ value stabilizing around 0.338 nm. The catalyst proved instrumental in transforming the initial structure into well-ordered graphite at lower temperatures. This investigation underscores the potential and benefits of employing a catalyst to generate high-quality graphite from wood at reduced temperatures, paving the way for sustainable and economically viable applications of this material. Full article

Background: Few studies have evaluated digital morphology (DM) analyzers on body fluids (BF). We evaluated the performance of a DM analyzer, Sysmex DI-60 (Sysmex, Kobe, Japan) for white blood cell (WBC) differentials in BF samples. Methods: In five BF samples (two pleural fluids and three ascites) containing a single, dominant cell type (>80%, neutrophils, lymphocytes, macrophages, abnormal lymphocytes, and malignant cells in each sample), we evaluated the precision of the DI-60 and compared the WBC differentials and turnaround times (TAT) between DI-60 and manual counting. Results: The precision of the DI-60 pre-classification and verification was excellent (%CV, 0.01–3.16%). After verification, the DI-60 showed high sensitivity, specificity, and efficiency (ranges: 90.8–98.1%, 96.8–97.9%, and 92.5–98.0%, respectively) for the dominant cell types in neutrophil- and lymphocyte-dominant samples. For all samples, the DI-60 and manual counting showed high correlations for major cell types (neutrophils, lymphocytes, macrophages, and others, r = 0.72 to 0.94) after verification. The agreement between the pre-classification and verification of the DI-60 was strong in the neutrophil-dominant sample (κ = 0.81). The DI-60 showed a significantly longer TAT (min: s) than manual counting for all samples (median TAT/slide: 6:28 vs. 1:53, p < 0.0001), with remarkable differences in abnormal lymphocyte- and malignant cell-dominant samples (21:05 vs. 2:06; 12:34 vs. 2:25). Conclusions: The DI-60 may provide reliable data in neutrophil- and lymphocyte-dominant BF samples. However, it may require longer times and higher workloads for WBC differentials especially in BF samples containing atypical cells. Further improvement would be needed before applying DM analyzers for routine clinical practice in BF analysis. Full article

In recent decades, there has been a rise in public consciousness of the adverse effects of expanded skin contact with sunlight, particularly the ultraviolet (UV) spectrum. UV radiation causes serious health problems like skin cancer, early aging, erythema, pigmentation, etc., due to contact with the skin. Therefore, the highly efficient UV-protection materials were manufactured using polypropylene and TiO₂ (PPTO) through cost-effective and easy methods. The designated 7.5 PPTO and 15 PPTO were prepared, varying the amount of TiO₂, as well as without using TiO₂ (PPNF), which was also manufactured as a control material. All the as-synthesized nonwoven fibers were carefully characterized employing a variety of microscopic and spectroscopic methods, such as X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, ultraviolet–visible diffuse reflectance spectroscopy, and contact angle measurements. In conclusion, 15 PPTO showed the highest UV-protection ability (87.5%) compared to 7.5 PPTO and PPNF. In addition, 15 PPTO exhibited 1.76 and 1.32 times higher protection than 7.5 PPTO and PPNF, respectively, when exposed to UB-B radiation. The enhanced activity may be due to the amount of TiO₂ because TiO₂ increased the product’s absorption and reflection capability. Overall, the PPTO nonwoven fibers can be applied to block harmful UV radiation. Full article

No information is available regarding the influence of besifovir (BSV), a new nucleotide analogue, on the occurrence of hepatocellular carcinoma (HCC) in patients with chronic hepatitis B (CHB). This study evaluated the reduced risk of HCC in patients undergoing BSV treatment. A total of 188 patients with CHB were treated with BSV for up to 8 years. We prospectively assessed the incidence of HCC compared with the risk from prediction models. During the follow-up, 5 patients developed HCC: 1 of 139 patients with non-cirrhotic CHB, and 4 of 49 patients with liver cirrhosis. We compared the HCC incidence in non-cirrhotic and cirrhotic patients with the predicted number derived from the REACH-B (risk estimation for HCC in CHB) model and GAG-HCC (guide with age, gender, HBV DNA, core promotor mutation, and cirrhosis) model, respectively. The standardized incidence ratio (SIR) was 0.128 (p = 0.039) at 7 years in non-cirrhotic CHB patients, and the SIR was 0.371 (p = 0.047) at 7.5 years in cirrhotic patients, suggesting a significantly decreased HCC incidence in both groups. HCC prediction was available for BSV-treated patients using existing models. In conclusion, BSV decreased the risk of HCC in patients with CHB, and prediction models were applicable. Clinical trial registry website and trial number: ClinicalTrials.gov no: NCT01937806. Full article

Four mutants varying the length of the G and SH genes, including a G-truncated mutant (ΔG) and three G/SH-truncated mutants (ΔSH/G-1, ΔSH/G-2, and ΔSH/G-3), were generated via serially passaging the avian metapneumovirus strain SNU21004 into the cell lines Vero E6 and DF-1 and into embryonated chicken eggs. The mutant ΔG particles resembled parental virus particles except for the variance in the density of their surface projections. G and G/SH truncation significantly affected the viral replication in chickens’ tracheal ring culture and in infected chickens but not in the Vero E6 cells. In experimentally infected chickens, mutant ΔG resulted in the restriction of viral replication and the attenuation of the virulence. The mutants ΔG and ΔSH/G-1 upregulated three interleukins (IL-6, IL-12, and IL-18) and three interferons (IFNα, IFNβ, and IFNγ) in infected chickens. In addition, the expression levels of innate immunity-related genes such as Mda5, Rig-I, and Lgp2, in BALB/c mice were also upregulated when compared to the parental virus. Immunologically, the mutant ΔG induced a strong, delayed humoral immune response, while the mutant ΔSH/G-1 induced no humoral immune response. Our findings indicate the potential of the mutant ΔG but not the mutant ΔSH/G-1 as a live attenuated vaccine candidate. Full article

Enterotoxigenic Bacteroides fragilis (ETBF) causes colitis and is implicated in inflammatory bowel diseases and colorectal cancer. The ETBF-secreted B. fragilis toxin (BFT) causes cleavage of the adherence junction, the E-cadherin, resulting in the large intestine showing IL-17A inflammation in wild-type (WT) mice. However, intestinal pathology by ETBF infection is not fully understood in B-cell-deficient mice. In this study, ETBF-mediated inflammation was characterized in B-cell-deficient mice (muMT). WT or muMT C57BL/6J mice were orally inoculated with ETBF and examined for intestinal inflammation. The indirect indicators for colitis (loss of body weight and cecum weight, as well as mortality) were increased in muMT mice compared to WT mice. Histopathology and inflammatory genes (Nos2, Il-1β, Tnf-α, and Cxcl1) were elevated and persisted in the large intestine of muMT mice compared with WT mice during chronic ETBF infection. However, intestinal IL-17A expression was comparable between WT and muMT mice during infection. Consistently, flow cytometry analysis applied to the mesenteric lymph nodes showed a similar Th17 immune response in both WT and muMT mice. Despite elevated ETBF colonization, the ETBF-infected muMT mice showed no histopathology or inflammation in the small intestine. In conclusion, B cells play a protective role in ETBF-induced colitis, and IL-17A inflammation is not attributed to prompted colitis in B-cell-deficient mice. Our data support the fact that B cells are required to ameliorate ETBF infection-induced colitis in the host. Full article

This study investigated the effect of localized electrical stimulation on Hanwoo beef quality. It focused on the chemical and physical properties of the Longissimus thoracis (LT) and Biceps femoris (BF) muscles, and it explored the implications of carbon dioxide (CO₂) reduction achieved by accelerating tenderization via localized electrical stimulation. The results show that the application of localized electrical stimulation (45 V) had no significant impact on the TBARS (thiobarbituric acid reactive substances) of either the LT muscle or the BF muscle. Localized electrical stimulation and aging treatments had a significant effect on meat tenderness in the LT and BF muscles, but there was no interactive effect. In particular, the WBsf (Warnar–Bratzler shear force) at 2 days of aging of the electrically stimulated BF muscle was 5.35 kg, which was lower than that of the control group (5.58 kg) after 14 days of aging; however, the effect of WBsf reduction due to aging in the LT muscle was higher than the localized electrical stimulation effect. Estimating CO₂ mitigation from a shorter feeding period for Hanwoo steers from 31 months to 26 months may reduce 1.04 kg of CO₂-eq emissions associated with the production of a single kilogram of trimmed beef. In conclusion, localized electrical stimulation improved the tenderness of Hanwoo beef and reduced CO₂ emissions. Full article

Degenerative lumbar spinal disease (DLSD), including spondylolisthesis and spinal stenosis, is increasing due to the aging population. Along with the disease severity, lumbar interbody fusion (LIF) is a mainstay of surgical treatment through decompression, the restoration of intervertebral heights, and the stabilization of motion segments. Currently, pseudoarthrosis after LIF is an important and unsolved issue, which is closely related to osteobiologies. Of the many signaling pathways, the bone morphogenetic protein (BMP) signaling pathway contributes to osteoblast differentiation, which is generally regulated by SMAD proteins as common in the TGF-β superfamily. BMP-2 and -4 are also inter-connected with Wnt/β-catenin, Notch, and FGF signaling pathways. With the potent potential for osteoinduction in BMP-2 and -4, the combination of allogenous bone and recombinant human BMPs (rhBMPs) is currently an ideal fusion material, which has equalized or improved fusion rates compared to traditional materials. However, safety issues in the dosage of BMP remain, so overcoming current limitations will provide significant advancement in spine surgery. In the future, translational research and the application of clinical study will be important to overcome the current limitations of spinal surgery. Full article

Waste wood, which has a large amount of cellulose fibers, should be transformed into useful materials for addressing environmental and resource problems. Thus, this study analyzed the application of waste wood as supercapacitor electrode material. First, cellulose fibers were extracted from waste wood and mixed with different contents of graphene nanoplatelets (GnPs) in water. Using a facile filtration method, cellulose papers with GnPs were prepared and converted into carbon papers through carbonization and then to porous activated carbon papers containing GnPs (ACP−GnP) through chemical activation processes. For the morphology of ACP−GnP, activated carbon fibers with abundant pores were formed. The increase in the amount of GnPs attached to the fiber surfaces decreased the number of pores. The Brunauer–Emmett–Teller surface areas and specific capacitance of the ACP−GnP electrodes decreased with an increase in the GnP content. However, the galvanostatic charge–discharge curves of ACPs with higher GnP contents gradually changed into triangular and linear shapes, which are associated with the capacitive performance. For example, ACP with 15 wt% GnP had a low mass transfer resistance and high charge delivery of ions, resulting in the specific capacitance value of 267 Fg⁻¹ owing to micropore and mesopore formation during the activation of carbon paper. Full article

Herpes simplex virus 1 (HSV-1) is double-stranded DNA virus that belongs to the Orthoherpesviridae family. It causes serious neurological diseases of the central nervous system, such as encephalitis. The current U.S. Food and Drug Administration (FDA)-approved drugs for preventing HSV-1 infection include acyclovir (ACV) and valacyclovir; however, their long-term use causes severe side effects and often results in the emergence of drug-resistant strains. Therefore, it is important to discover new antiviral agents that are safe and effective against HSV-1 infection. Korean chestnut honey (KCH) has various pharmacological activities, such as antioxidant, antibacterial, and anti-inflammation effects; however, antiviral effects against HSV-1 have not yet been reported. Therefore, we determined the antiviral activity and mechanism of action of KCH after HSV-1 infection on the cellular level. KCH inhibited the HSV-1 infection of host cells through binding and virucidal steps. KCH decreased the production of reactive oxygen species (ROS) and calcium (Ca²⁺) following HSV-1 infection and suppressed the production of inflammatory cytokines by inhibiting nuclear factor kappa-light-chain-enhancer of activated B cells (NF-кB) activity. Furthermore, we found that KCH inhibited the expression of the nod-like receptor protein 3 (NLRP3) inflammasome during HSV-1 infection. Taken together, the antiviral effects of KCH occur through multiple targets, including the inhibition of viral replication and the ROS-mediated NLRP3 inflammasome pathway. Our findings suggest that KCH has potential for the treatment of HSV-1 infection and related diseases. Full article