Search Results (29)

Background/Objectives: Salmonella Infantis (S. Infantis) is a bacterium that has gained importance in public health over the last decade due to its high pathogenicity and resistance to antibiotics. Therefore, the objective of the present study was to present key considerations for the design and development of geraniol-loaded nanocapsules for its delivery in the drinking water or feed of broiler chickens and to evaluate its potential as an antimicrobial agent against S. Infantis using a standard in vitro microplate assay and a model that simulates the pH and feed conditions of the crop of broiler chickens. Methods: Using a 3^k factorial experimental design, geraniol nanocapsule-based formulations were selected, and their antimicrobial activity was evaluated in in vitro models. Results: The results demonstrated that geraniol alone exhibits antimicrobial action against S. Infantis mainly due to its lipophilicity, hydrophobicity and the presence of the hydroxyl group found in its chemical structure, but when formulated in nanocapsular systems, the interaction of its components tends to reduce its antimicrobial action, especially the mixture of Tween 80:Span 80 and Miglyol^® 810N. Furthermore, the use of the in vitro model that simulates the crop of broiler chickens demonstrated that the formulation also has interactions with the feed components, completely nullifying the antimicrobial action of geraniol compared to that obtained in the in vitro microplate model. Conclusions: Preformulation studies during the development of nanocapsule-based formulations should be considered for the correct selection of the components of a formulation to ensure its effectiveness, without only considering the physicochemical and stability properties of these as is frequently seen in studies. Full article

Xyloglucan from Tamarindus indica seeds (TISs) is a polysaccharide widely used in the food, biomedical, and pharmaceutical sectors. Nevertheless, the challenge in future research for the food processing industry is to provide adequate knowledge regarding natural product extraction, chemical modifications, interactions, and potential applications according to sustainability issues. The goal of this work was to implement a sustainable method for xyloglucan extraction from TISs at a semi-industrial scale and carry out the characterization of this hydrocolloid, to compare the effect of the technique of decorticating of seeds on the chemical composition and physicochemical properties of xyloglucan. The TISs were decorticated using soaking (DS) and roasting (DR) methods, and, then, the xyloglucan was extracted applying a semi-industrial mechanical separation process. Subsequently, the extraction yield, chemical content, Fourier transform infrared analysis, color, morphology, molecular weight (MW), viscosity, texture, Z potential, particle size, and thermal properties were evaluated. Xyloglucan extraction from TISs at a semi-industrial scale was demonstrated for the first time. The xyloglucan yield by DR (44.04%) was significantly higher (p < 0.05) compared with DS (41.42%), while separation efficiency was similar in both methods (~97%). Significant differences (p < 0.05) in fat, ashes, crude fiber, calcium, total phenolic content, and antioxidant capacity in xyloglucan samples were observed by applying DS and DR. The method of decorticating promoted changes in the MW and particle size of xyloglucan samples, which were reflected in the viscosity, particle size, texture attributes, Z potential, and thermal properties of xyloglucan. These results show that the decorticating method is an important issue to be considered in the resultant chemical and physicochemical properties of xyloglucan extracted from tamarind seeds, for suitable applications of the xyloglucan in the food processing and pharmaceutical industries. Full article

This article follows-up on our recently published work, which evaluated the impact of the addition of an alfalfa leaf-derived adsorbent in the aflatoxin B₁ (AFB₁)-contaminated diet in regard to the production parameters, blood cell count, serum biochemistry, liver enzymes, and liver histology of turkey poults. This paper presents complementary results on microbial community, ileal morphology, barrier function, and immunity. For this purpose, 350 1-day-old female turkey poults were randomly distributed into five groups: (1) Control, AFB₁-free diet; (2) AF, AFB₁-contaminated diet at 250 ng/g; (3) alfalfa, AFB₁-free diet + 0.5% (w/w) adsorbent; (4) alfalfa + AF, AFB₁-contaminated diet at 250 ng/g + 0.5% (w/w) adsorbent; and (5) YCW + AF, AFB₁-contaminated diet at 250 ng/g + 0.5% (w/w) commercial yeast cell wall-based adsorbent (reference group). In general, in the AF group, the growth of opportunistic pathogens was promoted, which lead to gut dysbacteriosis, mainly influenced by Streptococcus lutetiensis. Conversely, a significant increase in beneficial bacteria (Faecalibacterium and Coprococcus catus) was promoted by the addition of the plant-based adsorbent. Moreover, the AF group had the lowest villus height and a compromised barrier function, as evidenced by a significant (p < 0.05) increase in fluorescein isothiocyanate dextran (FITC-d), but these negative effects were almost reversed by the addition of the alfalfa adsorbent. Furthermore, the AF + YCW and alfalfa + AF groups exhibited a significant increase in the cutaneous basophil hypersensitivity response compared to the rest of the experimental groups. Taken together, these results pointed out that the alfalfa counteracts the adverse effects of AFB₁ in poults, facilitating the colonization of beneficial bacteria and improving the barrier function of the turkey poults. Full article

A recent study published data on the growth performance, relative weights of the organs of the gastrointestinal tract, liver histology, serum biochemistry, and hematological parameters for turkey poults fed an experimental diet contaminated with aflatoxin B₁ (AFB₁) and humic acids (HA) extracted from vermicompost. The negative effects of AFB₁ (250 ng AFB₁/g of feed) were significantly reduced by HA supplementation (0.25% w/w), suggesting that HA might be utilized to ameliorate the negative impact of AFB₁ from contaminated diets. The present study shows the results of the remaining variables, as an extension of a previously published work which aimed to evaluate the impact of HA on the intestinal microbiota, gut integrity, ileum morphometry, and cellular immunity of turkey poults fed an AFB₁-contaminated diet. For this objective, five equal groups of 1-day-old female Nicholas-700 turkey poults were randomly assigned to the following treatments: negative control (basal diet), positive control (basal diet + 250 ng AFB₁/g), HA (basal diet + 0.25% HA), HA + AFB₁ (basal diet + 0.25% HA + 250 ng AFB₁/g), and Zeolite (basal diet + 0.25% zeolite + 250 ng AFB₁/g). In the experiment, seven replicates of ten poults each were used per treatment (n = 70). In general, HA supplementation with or without the presence of AFB₁ showed a significant increase (p < 0.05) in the number of beneficial butyric acid producers, ileum villi height, and ileum total area, and a significant reduction in serum levels of fluorescein isothiocyanate–dextran (FITC-d), a marker of intestinal integrity. In contrast, poults fed with AFB₁ showed a significant increase in Proteobacteria and lower numbers of beneficial bacteria, clearly suggesting gut dysbacteriosis. Moreover, poults supplemented with AFB₁ displayed the lowest morphometric parameters and the highest intestinal permeability. Furthermore, poults in the negative and positive control treatments had the lowest cutaneous basophil hypersensitivity response. These findings suggest that HA supplementation enhanced intestinal integrity (shape and permeability), cellular immune response, and healthier gut microbiota composition, even in the presence of dietary exposure to AFB₁. These results complement those of the previously published study, suggesting that HA may be a viable dietary intervention to improve gut health and immunity in turkey poults during aflatoxicosis. Full article

The short precorneal residence time of ophthalmic drops is associated with their low absorption; therefore, the development of ocular inserts capable of prolonging and controlling the ophthalmic release of drugs is an interesting option in the design and development of these drugs. A surface response design was developed, specifically the Central Composite Design (CCD), to produce ophthalmic films loaded with Dexamethasone (DEX) by the solvent evaporation method having experimental levels of different concentrations of previously selected polymers (PVP K-30 and Eudragit RS100.). Once optimization of the formulation was obtained, the in vivo test was continued. The optimal formulation obtained a thickness of 0.265 ± 0.095 mm, pH of 7.11 ± 0.04, tensile strength of 15.50 ± 3.94 gF, humidity (%) of 22.54 ± 1.7, mucoadhesion strength of 16.89 ± 3.46 gF, chemical content (%) of 98.19 ± 1.124, release of (%) 13,510.71, and swelling of 0.0403 ± 0.023 g; furthermore, in the in vivo testing the number and residence time of PMN cells were lower compared to the Ophthalmic Drops. The present study confirms the potential use of polymeric systems using PVPK30 and ERS100 as a new strategy of controlled release of ophthalmic drugs by controlling and prolonging the release of DEX at the affected site by decreasing the systemic effects of the drug. Full article

Lactoferrin (LF) is a glycoprotein that binds to iron ions (Fe²⁺) and other metallic ions, such as Mg²⁺, Zn²⁺, and Cu²⁺, and has antibacterial and immunomodulatory properties. The antibacterial properties of LF are due to its ability to sequester iron. The immunomodulatory capability of LF promotes homeostasis in the enteric environment, acting directly on the beneficial microbiota. LF can modulate antigen-presenting cell (APC) biology, including migration and cell activation. Nonetheless, some gut microbiota strains produce toxic metabolites, and APCs are responsible for initiating the process that inhibits the inflammatory response against them. Thus, eliminating harmful strains lowers the risk of inducing chronic inflammation, and consequently, metabolic disease, which can progress to type 2 diabetes mellitus (T2DM). LF and retinoic acid (RA) exhibit immunomodulatory properties such as decreasing cytokine production, thus modifying the inflammatory response. Their activities have been observed both in vitro and in vivo. The combined, simultaneous effect of these molecules has not been studied; however, the synergistic effect of LF and RA may be employed for enhancing the secretion of humoral factors, such as IgA. We speculate that the combination of LF and RA could be a potential prophylactic alternative for the treatment of metabolic dysregulations such as T2DM. The present review focuses on the importance of a healthy diet for a balanced gut and describes how probiotics and prebiotics with immunomodulatory activity as well as inductors of differentiation and cell proliferation could be acquired directly from the diet or indirectly through the oral administration of formulations aimed to maintain gut health or restore a eubiotic state in an intestinal environment that has been dysregulated by external factors such as stress and a high-fat diet. Full article

The selection of components within a formulation or for treatment must stop being arbitrary and must be focused on scientific evidence that supports the inclusion of each one. Therefore, the objective of the present study was to obtain a formulation based on ascorbic acid (AA) and Eudragit FS 30D microparticles containing curcumin–boric acid (CUR–BA) considering interaction studies between the active components carried out via Fourier transform infrared spectrometry (FTIR) and differential scanning calorimetry (DSC) to minimize antagonistic effects, and comprehensively and effectively treat turkey poults infected with Salmonella enteritidis (S. enteritidis). The DSC and FTIR studies clearly demonstrated the interactions between AA, BA, and CUR. Consequently, the combination of AA with CUR and/or BA should be avoided, but not CUR and BA. Furthermore, the Eudragit FS 30D microparticles containing CUR–BA (SD CUR–BA MP) showed a limited release of CUR–BA in an acidic medium, but they were released at a pH 6.8–7.0, which reduced the interactions between CUR–BA and AA. Finally, in the S. enteritidis infection model, turkey poults treated with the combination of AA and SD CUR–BA MP presented lower counts of S. enteritidis in cecal tonsils after 10 days of treatment. These results pointed out that the use of an adequate combination of AA and CUR–BA as an integral treatment of S. enteritidis infections could be a viable option to replace the indiscriminate use of antibiotics. Full article

An adsorbent material derived from alfalfa leaves was prepared and further characterized, and its efficacy for removing aflatoxin B₁ (AFB₁) was investigated. Characterization consisted of the use of attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), environmental scanning electron microscopy (ESEM), X-ray fluorescence spectroscopy (XRF), X-ray diffraction (XRD), point of zero charge (pH_pzc), zeta potential (ζ-potential), UV-Vis diffuse reflectance spectroscopy, and spectral analysis. To determine the adsorption capacity against AFB₁ (250 ng AFB₁/mL), pH-dependent and avian intestinal in vitro models were used. The adsorbent inclusion percentage was 0.5% (w/w). In general, the pH-dependent model gave adsorption percentages of 98.2%, 99.9%, and 98.2%, evaluated at pH values of 2, 5, and 7, respectively. However, when the avian intestinal model was used, it was observed that the adsorption percentage of AFB₁ significantly decreased (88.8%). Based on the characterization results, it is proposed that electrostatic, non-electrostatic, and the formation of chlorophyll-AFB₁ complexes were the main mechanisms for AFB₁ adsorption. From these results, it can be concluded that the adsorbent derived from alfalfa leaves could be used as an effective material for removing AFB₁ in in vitro digestion models that mimic the physiological reality. Full article

The objective of this study was to create polymeric dressings, microfibers, and microneedles (MN) loaded with ceftriaxone, using PMVA (Poly (Methyl vinyl ether-alt-maleic acid), Kollicoat^® 100P, and Kollicoat^® Protect as polymers to treat diabetic wounds and accelerate their recovery. These formulations were optimized through a series of experiments and were subsequently subjected to physicochemical tests. The results of the characterization of the dressings, microfibers, and microneedles (PMVA and 100P) were, respectively, a bioadhesion of 281.34, 720, 720, 2487, and 510.5 gf; a post-humectation bioadhesion of 186.34, 831.5, 2380, and 630.5 gf, tear strength of 2200, 1233, 1562, and 385 gf, erythema of 358, 8.4, 227, and 188; transepidermal water loss (TEWL) of 2.6, 4.7, 1.9, and 5.2 g/h·m²; hydration of 76.1, 89.9, 73.5, and 83.5%; pH of 4.85, 5.40, 5.85, and 4.85; and drug release (Peppas kinetics release) of n: 0.53, n: 0.62, n: 0.62, and n: 0.66). In vitro studies were performed on Franz-type diffusion cells and indicated flux of 57.1, 145.4, 718.7, and 2.7 µg/cm²; permeation coefficient (Kp) of 13.2, 19.56, 42, and 0.00015 cm²/h; and time lag (t_L) of 6.29, 17.61, 27. 49, and 22.3 h, respectively, in wounded skin. There was no passage of ceftriaxone from dressings and microfibers to healthy skin, but that was not the case for PMVA/100P and Kollicoat^® 100P microneedles, which exhibited flux of 194 and 0.4 µg/cm², Kp of 11.3 and 0.00002 cm²/h, and t_L of 5.2 and 9.7 h, respectively. The healing time of the formulations in vivo (tests carried out using diabetic Wistar rats) was under 14 days. In summary, polymeric dressings, microfibers, and microneedles loaded with ceftriaxone were developed. These formulations have the potential to address the challenges associated with chronic wounds, such as diabetic foot, improving the outcomes. Full article

Aflatoxin B₁ (AFB₁) exhibits the most potent mutagenic and carcinogenic activity among aflatoxins. For this reason, AFB₁ is recognized as a human group 1 carcinogen by the International Agency of Research on Cancer. Consequently, it is essential to determine its properties and behavior in different chemical systems. The chemical properties of AFB₁ can be explored using computational chemistry, which has been employed complementarily to experimental investigations. The present review includes in silico studies (semiempirical, Hartree–Fock, DFT, molecular docking, and molecular dynamics) conducted from the first computational study in 1974 to the present (2022). This work was performed, considering the following groups: (a) molecular properties of AFB₁ (structural, energy, solvent effects, ground and the excited state, atomic charges, among others); (b) theoretical investigations of AFB₁ (degradation, quantification, reactivity, among others); (c) molecular interactions with inorganic compounds (Ag⁺, Zn²⁺, and Mg²⁺); (d) molecular interactions with environmentally compounds (clays); and (e) molecular interactions with biological compounds (DNA, enzymes, cyclodextrins, glucans, among others). Accordingly, in this work, we provide to the stakeholder the knowledge of toxicity of types of AFB₁-derivatives, the structure–activity relationships manifested by the bonds between AFB₁ and DNA or proteins, and the types of strategies that have been employed to quantify, detect, and eliminate the AFB₁ molecule. Full article

Vermicompost was used for humic acid (HA) preparation, and the adsorption of aflatoxin B₁ (AFB₁) was investigated. Two forms of HA were evaluated, natural HA and sodium-free HA (SFHA). As a reference, a non-commercial zeolitic material was employed. The adsorbents were characterized by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), energy-dispersive X-ray spectroscopy (EDS), zeta potential (ζ-potential), scanning electron microscopy (SEM), and point of zero charge (pHpzc). The adsorbent capacity of the materials when added to an AFB₁-contaminated diet (100 µg AFB₁/kg) was evaluated using an in vitro model that simulates the digestive tract of chickens. Characterization results revealed the primary functional groups in HA and SFHA were carboxyl and phenol. Furthermore, adsorbents have a highly negative ζ-potential at the three simulated pH values. Therefore, it appears the main influencing factors for AFB₁ adsorption are electrostatic interactions and hydrogen bonding. Moreover, the bioavailability of AFB₁ in the intestinal section was dramatically decreased when sorbents were added to the diet (0.2%, w/w). The highest AFB₁ adsorption percentages using HA and SFHA were 97.6% and 99.7%, respectively. The zeolitic material had a considerable adsorption (81.5%). From these results, it can be concluded that HA and SFHA from vermicompost could be used as potential adsorbents to remove AFB₁ from contaminated feeds. Full article

Frozen food is exposed to inevitable temperature changes during its storage, transport, and at the point of sale, which implies a significant impact on its properties and quality. Thus, the study of the effect of the formation of crystals on both the surface of the meat and the container when it is kept frozen, involving the thermodynamic analysis and changes that occurred at the structural level, is necessary. In this research, pork meat from Longissimus thoracis muscle was used, which was cut into plates and packed with two types of food-grade films: (1) Polyvinyl Chloride (PVC) and (2) low-density polyethylene (LDPE). Samples were frozen by indirect contact with nitrogen up to −40 ± 0.5 °C and subsequently stored at −20 ± 1 °C in a chamber from 0 to 15 days. The frost thickness was evaluated by the image superposition method. FTIR spectra were obtained by means of an Attenuated Total Reflectance (ATR) accessory, and thermal changes were determined by Modulated Differential Scanning Calorimetry (MDSC). It was found that the thickness of the frost on the surface of the meat is less when it is packaged with PVC due to the characteristics of the polymer matrix of the package. Furthermore, there were important changes at the molecular level identified by FTIR and MDSC, indicating significant differences (p < 0.05) between the samples. In general, PVC films were more stable at lower temperatures, allowing a small number of changes in the meat surface due to temperature fluctuations. Full article

Increasing discharges of synthetic antimicrobial agents from industrial and municipal sewage, as well as from agricultural runoffs into water bodies, is still a global challenge. Here, an unmodified low-cost sorbent was prepared in an ecofriendly manner from Pyracantha koidzumii leaves for the removal of enrofloxacin (ENR). Sorbent characterization was accomplished using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), BET surface area, zeta potential, and point of zero charge. Biosorption assays were carried out via batch mode concerning the impact of adsorbent dosage, contact time, solution pH, solution ionic strength, adsorbate concentration, and temperature. In general, ENR adsorption was significantly correlated with pH and ionic strength. At a neutral pH, the sorbent had a theoretical maximal ENR uptake of 138.89 mg/g. However, the adsorption capacity was significantly affected by the presence of high concentrations of divalent cations (Ca²⁺ and Mg²⁺). The findings from the kinetics and isotherms showed that the pseudo-second-order kinetic and Langmuir isotherm models best fit the experimental data. Electrostatic interactions, hydrogen bonding, and π-π stacking were the most important mechanisms of adsorption of ENR onto the P. koidzumii sorbent. Overall, this study suggests the promising application of this agricultural residue for the efficient removal of ENR from water. Full article

Silver nanoparticles were successfully synthesized using Thuja orientalis aqueous extract and AgNO₃ as a precursor. UV–Vis showed a distinct absorption peak at 424 nm attributed to silver nanoparticles due to their surface plasmon resonance. Atomic absorption analysis reflected an increase in the concentration of nanoparticles in relation to the progress of the synthesis, obtaining a peak concentration value of 15.7 mg/L at 50 min. The FTIR spectra revealed the characteristic functional groups of phytomolecules involved in the silver–ion binding process, such as R–O–H (3335 cm⁻¹⁾ O=C–OH (2314 cm⁻¹) and C—C=C (1450 cm⁻¹). At 50 min, zeta potential showed the stability of the nanoparticles with the value of −21.73 mV. TEM micrographs revealed the formation of spherical nanoparticles with an average size of about 85.77 nm. Furthermore, films incorporated with nanoparticles exhibited a Tg from 66.42 °C to 73.71 °C and Tm at 103.31 °C. Films from the G22 formulation presented excellent antibacterial properties inhibiting the growth of Staphylococcus aureus. Thuja orientalis aqueous extract could be a low-cost, eco-friendly, and efficient reducing and capping agent for the synthesis of nanometric-sized Ag particles. Gelatin films with nanoparticles are expected to have high potential as an active food packaging system. Full article

The coordination of one and two aflatoxin B₁ (AFB₁, a potent carcinogen) molecules with chlorophyll a (chl a) was studied at a theoretical level. Calculations were performed using the M06-2X method in conjunction with the 6-311G(d,p) basis set, in both gas and water phases. The molecular electrostatic potential map shows the chemical activity of various sites of the AFB₁ and chl a molecules. The energy difference between molecular orbitals of AFB₁ and chl a allowed for the establishment of an intermolecular interaction. A charge transfer from AFB₁ to the central cation of chl a was shown. The energies of the optimized structures for chl a show two configurations, unfolded and folded, with a difference of 15.41 kcal/mol. Chl a appeared axially coordinated to the plane (α-down or β-up) of the porphyrin moiety, either with the oxygen atom of the ketonic group, or with the oxygen atom of the lactone moiety of AFB₁. The complexes of maximum stability were chl a 1-α-E-AFB₁ and chl a 2-β-E-AFB₁, at −36.4 and −39.2 kcal/mol, respectively. Additionally, with two AFB₁ molecules were chl a 1-D-2AFB₁ and chl a 2-E-2AFB₁, at −60.0 and −64.8 kcal/mol, respectively. Finally, biosorbents containing chlorophyll could improve AFB₁ adsorption. Full article