Technologies | Collection of Highly Cited Papers Ⅰ

1. “A Survey on Contrastive Self-Supervised Learning”
by Jaiswal, A.; Babu, A. R.; Zadeh, M. Z.; Banerjee, D. and Makedon, F.
Technologies 2021, 9(1), 2; https://doi.org/10.3390/technologies9010002
Available online: https://www.mdpi.com/2227-7080/9/1/2

Highlights:

Exploration and detailed analysis of the existing state-of-the-art techniques in contrastive learning;
Extensive evaluation of contrastive learning in various domains such as computer vision (Images, Videos), Natural Language Processing, etc., with state-of-the-art results in multiple datasets;
Future direction of contrastive learning.

2. “Unsupervised Domain Adaptation in Semantic Segmentation: A Review”
by Toldo, M.; Maracani, A.; Michieli, U. and Zanuttigh, P.
Technologies 2020, 8(2), 35; https://doi.org/10.3390/technologies8020035
Available online: https://www.mdpi.com/2227-7080/8/2/35

Highlights:

Gives a comprehensive overview of recent advancements in Unsupervised Domain Adaptation of deep networks for Semantic Segmentation;
Identifies 3 main representation levels at which domain adaptation can be applied, i.e., at the input, at the intermediate feature representation or at the output of the deep network;
Categorizes the vast range of UDA techniques into 7 groups: Domain Adversarial Learning, Generative-based Adaptation, Classifier Discrepancy, Self-Training, Entropy Minimization, Curriculum Learning and Multi-Task Learning;
Presents the widely used case study of synthetic-to-real adaptation for the semantic understanding of road scenes;
Provides an extensive comparison of state-of-the-art approaches on multiple benchmarks and with different segmentation models.

3. “The Road to Improved Fiber-Reinforced 3D Printing Technology”
by Kabir, S. M. F.; Mathur, K. and Seyam, A.-F. M.
Technologies 2020, 8(4), 51; https://doi.org/10.3390/technologies8040051
Available online: https://www.mdpi.com/2227-7080/8/4/51

Highlights:

Evaluates scopes and capabilities of commercial 3D printing technology to develop fiber-reinforced composites from material (filaments) and technology (slicer) perspectives;
Unveils detailed properties of commercial 3D printing filaments (fiber and polymer) used for printing fiber-reinforced composites;
Demonstrates and illustrates the routes to avail high performance printed composites as well as potential avenues of improvement of the printing technology.

4. “Hardware Implementation of a Softmax-Like Function for Deep Learning”
by Kouretas, I. and Paliouras, V.
Technologies 2020, 8(3), 46; https://doi.org/10.3390/technologies8030046
Available online: https://www.mdpi.com/2227-7080/8/3/46

Highlights:

Proposes a simplified architecture for a softmax-like function, the hardware implementation of which is based on a proposed approximation that exploits the statistical structure of the vectors processed by the softmax layers in various CNNs;
The proposed architecture is parametrized taking into account the requirements of the targeted application;
The proposed architecture is efficiently implemented in hardware.

5. “A Parametric EIT System Spice Simulation with Phantom Equivalent Circuits”
by Dimas, C.; Uzunoglu, N. and Sotiriadis, P. P.
Technologies 2020, 8(1), 13; https://doi.org/10.3390/technologies8010013
Available online: https://www.mdpi.com/2227-7080/8/1/13

Highlights:

Parametric Simulation interface for an Electrical Impedance Tomography Hardware System;
SPICE and MATLAB software are utilized to simulate the system's analog and digital parts;
The Phantom Subject Under Test (SUT) is simulated as a frequency-dependent multiport RLC circuitry;
Sources of measurement errors are examined.