Welcoming New Early Career Editorial Board Members of Journal of Composites Science

Name: Dr. Jun Wang
Affiliation: 1. Advanced Materials Thrust, The Hong Kong University of Science and Technology (Guangzhou), Guangzhou 511400, China
2. Department of Chemical and Biological Engineering, The Hong Kong University of Science and Technology, Hong Kong 999077, China
Research interests: conductive polymers and nanocomposites; porous materials; foams; polymer blends; polymer interfaces; 2D materials; rheology

Name: Dr. Peng Xu
Affiliation: Institute for Composites Science Innovation (InCSI), School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, China
Research interests: polymer resin; interface engineering of composite material; structural health monitoring of composite material

Name: Dr. Jing He
Affiliation: Department of Chemistry, Tsinghua University, Beijing, China
Research interests: thermal interface; crystal; electrical packaging material; material characterization; nanomaterials; surface modification; thermal conductivity; thermal management

Name: Dr. Ding Zhang
Affiliation: School of Materials Science and Engineering, Nankai University, Tianjin, China
Research interests: flexible thermoelectric materials and devices; wearable electronic devices

Name: Dr. Xujiang Chao
Affiliation: School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, China
Research interests: computational mechanics of composites

Name: Dr. Yanhong Chen
Affiliation: Department of Astronautic Science and Mechanics，Harbin Institute of Technology, Harbin, China
Research interests: mechanics of composites; impact & experimental mechanics; computational methods for solid mechanics

Name: Dr. Guoxiang Zhou
Affiliation: School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, China
Research interests: ceramics; concrete; additive manufacturing; coating

Name: Dr. Huafeng Quan
Affiliation:  College of Materials Science and Engineering, Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology, Hunan University, Changsha 410082, China
Research interests: carbon and ceramic matrix composites; high-temperature thermal protective coatings; near-zero-expansion composites; microwave absorbing materials; aerogel materials

Name: Dr. Qingfeng Fu
Affiliation: College of Materials Science and Engineering, Hunan Joint International Laboratory of Advanced Materials and Technology for Clean Energy, Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology, Hunan University, Changsha 410082, China
Research interests: fluoropolymers; polymer-derived porous carbon; C–F bond

Name: Dr. Jie Zhi
Affiliation: School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, China
Research interests: damage and fracture; multiscale modeling; finite element; delamination; composites

Name: Dr. Jie Zhu
Affiliation: Institute of Environment and Sustainable Development in Agriculture, Chinese Academy of Agricultural Sciences, Beijing 100081, China
Research interests: waste-based composite substrates; bio-based pollution mitigation and carbon sequestration systems

Name: Dr. Haibao Liu
Affiliation: School of Engineering and Materials Science, Queen Mary University of London, London E1 4NS, UK
Research interests: mechanical characterization of composite materials; fracture mechanics of engineering composites; impact response of laminated composites; numerical modelling of composite materials; composite mechanics

Name: Dr. Jiaolong Liu
Affiliation: School of Physics, Xidian University, Xi’an 710071, China
Research interests: theoretical design; preparation and stealth application of electromagnetic wave absorbing materials

Name: Dr. Jia Ge
Affiliation: School of Mechanical and Materials Engineering, University College Dublin (UCD), Dublin, Ireland
Research interests: thermoplastic composites manufacturing; composite machining; surface damage; process modelling and simulation

Name: Dr. Desheng Liu
Affiliation: State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China
Research interests: robust bio-lubrication hydrogel; ultra-slippery surface/interface of soft matters; bioinspired soft materials fabrication; soft materials engineering; soft materials with extreme properties; 3D printing of functional soft materials

Name: Dr. Zongyi Deng
Affiliation: School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
Research interests: polymer matrix composite; carbon fiber; glass fiber; flame retardancy; recycling; ceramic; thermal protection; oxidation resistance; electromagnetic shielding; wave absorption; thermally conductive composite; aerogel; epoxy resin; phenolic resin

Name: Dr. Dongming Li
Affiliation: School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China
Research interests: computational mechanics and applied mechanics of new materials and structures

Name: Dr. Peipeng Li
Affiliation: School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan, China
Research interests: new and functional cement-based materials; composite structures and new material structures; structural performance and optimization in extreme environments

Name: Dr. Jie Zhang
Affiliation: College of Aeronautics and Astronautics, Taiyuan University of Technology, Taiyuan, China
Research interests: cement-based composites; mechanical properties analysis combining artificial intelligence and big data

Name: Dr. Changan Xu
Affiliation: Institute of Chemical Engineering, Guangdong Academy of Sciences, Guangzhou, China
Research interests: polyurethane elastomers; silicones; adhesives; composite materials; bio-based materials; nanomaterials and anti-corrosion coatings

Name: Dr. Zhaokun Wang
Affiliation: School of Fashion and Textiles, The Hong Kong Polytechnic University, Kowloon, Hong Kong, China
Research interests: composite structure; fluid structure interaction; radiation cooling; material and structure optimization; flow control

Name: Dr. Shenzhen Chang
Affiliation: School of Chemistry and Chemical Engineering, Hainan University, Haikou, China
Research interests: coordination chemistry; catalysis & catalytic materials; polyoxometalate (POM); metal-organi frameworks; stimulus responsive materials; photochromic

Name: Dr. Jialiang Wang
Affiliation: Department of Civil and Architectural Engineering, Aarhus University, 8000C Aarhus, Denmark
Research interests: nano-engineered cementitious composites; ultra-high-performance concrete; waste utilization and recycling; impact; self-healing; mineralization

Name: Dr. Jianchao Zou
Affiliation: Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Hong Kong, China
Research interests: contact, friction, and fracture of materials; dynamic response and microstructure of materials; advanced multifunctional composites; machine learning and computational mechanics; numerical modeling and simulation; experiment and measurement technologies

Name: Dr. Jingjie Wei
Affiliation: Department of Civil, Architectural and Environmental Engineering, Center for Infrastructure Engineering Studies, Missouri University of Science and Technology, Rolla, MO 65409, USA
Research interests: low-carbon materials; shrinkage mitigation; crack control; structural evaluation; 3DPC

Name: Dr. Wei Liu
Affiliation: School of Mechanics & Civil Engineering, China University of Mining and Technology, Beijing 100083, China
Research interests: mechanics of composite materials; experimental mechanics; optical measurement; artificial intelligence; impact mechanics; multiscale fracture

Name: Dr. Lei Chen
Affiliation: College of Sericulture, Textile and Biomass Sciences, Southwest University, Chongqing 400715, China
Research interests: functional textiles; flexible wearable electronic devices; surface modification and nanofiberization treatment of high-performance fibers

Name: Dr. Zhaogui Wang
Affiliation: Department of Mechanical Engineering, Naval Architecture and Ocean Engineering College, Dalian Maritime University, Dalian 116000, China
Research Interests: additive manufacturing; mechanics of composite materials; lightweight design; green manufacturing technology for naval and marine equipment

Name: Dr. Biao Hu
Affiliation: College of Civil and Transportation Engineering, Shenzhen University, Shenzhen, China
Research interests: composite materials and structures; structural strengthening; durability; solid waste resource utilization

Name: Dr. Paulo Siani
Affiliation: Department of Materials Science, University of Milano-Bicocca, Via R. Cozzi 55, 20125 Milan, Italy
Research interests: nanomedicine; molecular dynamics; coarse-grained method; nanoparticles; polymer coating; nanomaterials; biomembranes

Name: Dr. Iacopo Bianchi
Affiliation: Departmente of Mathematical Science and Industrial Engineering, Università Politecnica delle Marche, 60121 Ancona, Italy
Research interests: reinforced plastic; carbon fiber; ultimate tensile strength; composites; sustainability

Name:  Dr. Maria Pia Falaschetti
Affiliation:  Department of Industrial Engineering, University of Bologna, Viale Risorgimento 2, 40136 Bologna, Italy
Research interests: composite materials; crashworthiness; impacts; aeronautic structures; automotive structures; design

Name: Dr. Robert Haigh
Affiliation: Institute for Sustainable Industries and Liveable Cities, Victoria University, Melbourne, VIC, Australia
Research interests: materials science; building and construction; composites; waste

Name: Dr. Matteo Viscoti
Affiliation: Department of Engineering for Innovation, University of Salento, Lecce, Italy
Research interests: doubly-curved shell; generalized differential quadrature; multifield analysis

Name: Dr. Giuseppe Ferrara
Affiliation: Department of Applied Science and Technology, Politecnico di Torino, Turin, Italy
Research interests: CO₂ activated concrete; supplementary cementitious materials (SCM); carbon capture and utilization (CCU) in building materials; inorganic and polymeric based composite systems for strengthening of masonry (FRCM/TRM; FRP); use of plant fibres in inorganic based composites; durability of inorganic based composite systems; wood-concrete hybrid structural systems

Name: Dr. Danilo D’Andrea
Affiliation: Department of Engineering, University of Messina, Contrada di Dio (S. Agata), 98166 Messina, Italy
Research interests: additive manufacturing; fatigue life; topology optimization; composite materials; energy methods; smart design; mechanical behavior; thermography

Name: Dr. Marco Bonopera
Affiliation: Department of Architecture and Industrial Design, University of Campania “Luigi Vanvitelli”, Via San Lorenzo ad Septimum, 81031 Aversa, CE, Italy
Research interests: behavior of reinforced prestressed concrete and steel structures; bridge engineering; engineering materials; machine learning; finite element method; structural health assessment and monitoring

Name: Dr. Carlos Rafael Silva de Oliveira
Affiliation: Department of Textile Engineering, Federal University of Santa Catarina (UFSC), Florianópolis, Brazil
Research interests: polymeric and ceramic (nano)composites; hybrid polymers; textile fibers & processes

Name: Dr. Afonso Henrique da Silva Júnior
Affiliation: Energy and Sustainability Department, Federal University of Santa Catarina-UFSC, 3201 Governador Jorge Lacerda Hwy., Araranguá 88905-120, SC, Brazil
Research interests: advanced materials; adsorption; water treatment; materials characterization; photocatalysis; composites; fibers and polymers