Materials | Highly Cited Papers from 2024 in the “Advanced Materials Characterization” Section
The Section “Advanced Materials Characterization” of Materials (ISSN: 1996-1944) focuses on contributions that have a significant component linked to the (advanced) structural characterization of solid materials. In many applications, the exact structure, crystal structure, position of functional groups, and other structural parameters have a significant effect on the characteristics and properties of the material. These factors are commonly known as "structure–property" or “structure–activity” relationships.
As all of the articles published in our journal are of an open access format, you have free and unlimited access to the full texts. We welcome you to read our most highly cited papers published in 2024, as listed below:
“Stability and Failure of Thin-Walled Composite Plate Elements with Asymmetric Configurations”
by Katarzyna Falkowicz
Materials 2024, 17(9), 1943; https://doi.org/10.3390/ma17091943
Available online: http://www.mdpi.com/1996-1944/17/9/1943
“Secondary Ion Mass Spectral Imaging of Metals and Alloys”
by Yanjie Shen, Logan Howard and Xiao-Ying Yu
Materials 2024, 17(2), 528; https://doi.org/10.3390/ma17020528
Available online: http://www.mdpi.com/1996-1944/17/2/528
“Damage Detection in FRP-Reinforced Concrete Elements”
by Pranit Malla, Seyed Saman Khedmatgozar Dolati, Jesus D. Ortiz, Armin B. Mehrabi, Antonio Nanni and Jiayi Ding
Materials 2024, 17(5), 1171; https://doi.org/10.3390/ma17051171
Available online: http://www.mdpi.com/1996-1944/17/5/1171
“Composition and Element Distribution Mapping of γ′ and γ″ Phases of Inconel 718 by High-Resolution Scanning Transmission Electron Microscopy and X-ray Energy-Dispersive Spectrometry”
by Philippe A. Buffat, Ioannis Alexandrou and Aleksandra Czyrska-Filemonowicz
Materials 2024, 17(3), 594; https://doi.org/10.3390/ma17030594
Available online: http://www.mdpi.com/1996-1944/17/3/594
“Mobility of Zn and Cu in Bentonites: Implications for Environmental Remediation”
by Edyta Nartowska, Anna Podlasek, Magdalena Daria Vaverková, Eugeniusz Koda, Aleksandra Jakimiuk, Robert Kowalik and Tomasz Kozłowski
Materials 2024, 17(12), 2957; https://doi.org/10.3390/ma17122957
Available online: http://www.mdpi.com/1996-1944/17/12/2957
“Separation of Damage Mechanisms in Full Forward Rod Extruded Case-Hardening Steel 16MnCrS5 Using 3D Image Segmentation”
by Lars A. Lingnau, Johannes Heermant, Johannes L. Otto, Kai Donnerbauer, Lukas M. Sauer, Lukas Lücker, Marina Macias Barrientos and Frank Walther
Materials 2024, 17(12), 3023; https://doi.org/10.3390/ma17123023
Available online: http://www.mdpi.com/1996-1944/17/12/3023
“Nanostructuring of Additively Manufactured 316L Stainless Steel Using High-Pressure Torsion Technique: An X-ray Line Profile Analysis Study”
by Jenő Gubicza, Kamilla Mukhtarova and Megumi Kawasaki
Materials 2024, 17(2), 454; https://doi.org/10.3390/ma17020454
Available online: http://www.mdpi.com/1996-1944/17/2/454
“The Influence of Different Aggregates on the Physico-Mechanical Performance of Alkali-Activated Geopolymer Composites Produced Using Romanian Fly Ash”
by Adrian-Victor Lăzărescu, Andreea Hegyi, Alexandra Csapai and Florin Popa
Materials 2024, 17(2), 485; https://doi.org/10.3390/ma17020485
Available online: http://www.mdpi.com/1996-1944/17/2/485
“Quantitative Characterization by Transmission Electron Microscopy and Its Application to Interfacial Phenomena in Crystalline Materials”
by Seiichiro Ii
Materials 2024, 17(3), 578; https://doi.org/10.3390/ma17030578
Available online: http://www.mdpi.com/1996-1944/17/3/578
by Melonie P. Thomas, Ryan Schoell, Nahid Sultan Al-Mamun, Winson Kuo, John Watt, William Windes, Khalid Hattar and Aman Haque
Materials 2024, 17(4), 895; https://doi.org/10.3390/ma17040895
Available online: http://www.mdpi.com/1996-1944/17/4/895