Reviewer Board
Members of the reviewer board are selected from all Polymers reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Department of Chemistry, Sultan Qaboos University, Muscat, Oman
Interests: ionic liquid; surfactant; chemical thermodynamics; phase equilibria of pure and multi-component liquid mixtures; aqueous biphasic system
Interests: ionic liquid; surfactant; chemical thermodynamics; phase equilibria of pure and multi-component liquid mixtures; aqueous biphasic system
Department of Aerospace Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates
Interests: polymer viscoelasticity; polymer constitutive modeling; Polymer Composites; polymer additive manufacturing; polymer large deformation; polymer hyper-elasticity; electro-active polymers; smart polymers
Interests: polymer viscoelasticity; polymer constitutive modeling; Polymer Composites; polymer additive manufacturing; polymer large deformation; polymer hyper-elasticity; electro-active polymers; smart polymers
Department of Chemistry, Kohat University of Science and Technology, Kohat 26000, Khyber Pakhtunkhwa, Pakistan
Interests: falvor chemisty; Analytical methods; food chemistry; bioactivities; metals analyses
Interests: falvor chemisty; Analytical methods; food chemistry; bioactivities; metals analyses
Department of Electronics and Nanoengineering, Aalto University, Espoo, Finland
Interests: nanowires; MOVPE/MOCVD; III-V semiconductors; nanomaterials; microfabrication
Interests: nanowires; MOVPE/MOCVD; III-V semiconductors; nanomaterials; microfabrication
Organic Synthesis Institute, and Organic Chemistry Department, Alicante University, Apdo. 99, 03080 Alicante, Spain
Interests: organic synthesis; water based polyurethane
Interests: organic synthesis; water based polyurethane
Architectural Engineering Department, United Arab Emirates University, Abu Dhabi, United Arab Emirates
Interests: building insulation materials; desiccant cooling; sustainable buildings; bio-insulation materials; building performance simulation; solar energy
Interests: building insulation materials; desiccant cooling; sustainable buildings; bio-insulation materials; building performance simulation; solar energy
Institute of Biochemistry, University of Leipzig, 04103 Leipzig, Germany
Interests: TiO2 nanotubes; anodization; amorphous; anatase; osseointegration; gene expression; implants; chitin; scaffold; sponges; hemocytes; hemolymph; biomineralization; calcite
Interests: TiO2 nanotubes; anodization; amorphous; anatase; osseointegration; gene expression; implants; chitin; scaffold; sponges; hemocytes; hemolymph; biomineralization; calcite
Department of Prosthodontics and Implantology, College of Dentistry, King Faisal University, Al-Ahsa 31982, Saudi Arabia
Interests: dental biomaterials; salivary proteins and peptides; antimicrobial peptides; dental polymer; bioactive glasses; bone cement; dental composites; silver diamine flouride; periodontal membranes; oral tissue engineering; dental implants; nanotechnology; oral cancer biomarkers; salivary biomarkers; nanomaterials; oral antimicrobial peptides; zirconia; biosensors; polyetheretherketone (PEEK); polyetherketoneketone (PEKK); oral fluids proteomics; implant dentistry; surface coating of dental materials; dental education; adhesive materials and cadcam technology
Interests: dental biomaterials; salivary proteins and peptides; antimicrobial peptides; dental polymer; bioactive glasses; bone cement; dental composites; silver diamine flouride; periodontal membranes; oral tissue engineering; dental implants; nanotechnology; oral cancer biomarkers; salivary biomarkers; nanomaterials; oral antimicrobial peptides; zirconia; biosensors; polyetheretherketone (PEEK); polyetherketoneketone (PEKK); oral fluids proteomics; implant dentistry; surface coating of dental materials; dental education; adhesive materials and cadcam technology
Faculty of Applied Sciences, Ton Duc Thang University, HCMC 700000, Vietnam
Interests: conducting polymers; CNT; composites; actuators; sensors; polymers
Interests: conducting polymers; CNT; composites; actuators; sensors; polymers
Advanced Photonics Research Institute, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea
Interests: MEMS; microfluidics system; droplet microfluidics; microfabrication; 3D bio printing; drug delivery
Interests: MEMS; microfluidics system; droplet microfluidics; microfabrication; 3D bio printing; drug delivery
Safety System R&D Group, Korea Institute of Industrial Technology, 320 Techno-sunhwan-ro, Yuga-myeon, Dalseong-gun, Daegu 42994, Republic of Korea
Interests: polymer based extrusion and manufacturing; polymer welding; catheter manufacturing
Interests: polymer based extrusion and manufacturing; polymer welding; catheter manufacturing
Virginia Polytechnic Institute and State University, Blacksburg, United States
Interests: cyclodextrin; PLA; inclusion complex; thermal expansion stability
Interests: cyclodextrin; PLA; inclusion complex; thermal expansion stability
Department of Chemistry, Faculty of Science, Toho University, 2-2-1 Miyama, Funabashi, Chiba 274-8510, Japan
Interests: coordination polymer, coordination chemistry, spin crossover, crystal chemistry
Interests: coordination polymer, coordination chemistry, spin crossover, crystal chemistry
Institute of Chemistry Far East Branch Russian Academy of Sciences
Russia. Vladivostok, Av. 100-letiya Vladivostoka, 159.
Interests: electropolymerization; nanocomposites and hybrid materials: metal nanoparticles/polymer, synthesis, structure and characterizations; biomedical and sensors and catalytic applications; ultrafiltration membranes
Interests: electropolymerization; nanocomposites and hybrid materials: metal nanoparticles/polymer, synthesis, structure and characterizations; biomedical and sensors and catalytic applications; ultrafiltration membranes
Department of Chemistry & Molecular Biology, University of Gothenburg, Gothenburg, Sweden
Interests: physical chemistry; surface chemistry; phase change; colloid chemistry; molecular dynamics
Interests: physical chemistry; surface chemistry; phase change; colloid chemistry; molecular dynamics
Institute of Nuclear Physics Polish Academy of Sciences, PL-31342 Krakow, Poland
Interests: magnetism; magnetic relaxations; magnetocaloric effect; magnetic anisotropy; molecular magnets; magnetometry; AC susceptibility
Interests: magnetism; magnetic relaxations; magnetocaloric effect; magnetic anisotropy; molecular magnets; magnetometry; AC susceptibility
Institute of Bioproducts and Paper Technology, Graz University of Technology, Inffeldgasse 23, 8010 Graz, Austria
Interests: bio(polymers), coating technology, barriers, packaging materials, paper and paperboard, natural materials, surface treatment
Interests: bio(polymers), coating technology, barriers, packaging materials, paper and paperboard, natural materials, surface treatment
A.V. Topchiev Institute of Petrochemical Synthesis, Russian Academy of Sciences 29, Leninsky prospect, Moscow 119991, Russia
Interests: Polymer Composites; Rheology and processing; friction and adhesion
Interests: Polymer Composites; Rheology and processing; friction and adhesion
1. N.N.Semenov Federal Research Center for Chemical Physics, Russian Academy of Sciences, 4 Kosygin St., 119991 Moscow, Russia
2. Institute for Regenerative Medicine, Sechenov University, 8-2 Trubetskaya St., 119991 Moscow, Russia
Interests: atomic force spectroscopy; physical methods in biology and medicine; photochemistry; physical chemistry of polymers
2. Institute for Regenerative Medicine, Sechenov University, 8-2 Trubetskaya St., 119991 Moscow, Russia
Interests: atomic force spectroscopy; physical methods in biology and medicine; photochemistry; physical chemistry of polymers
School of Chemical Engineering, National Technical University of Athens, 9 Iroon Polytechniou Str., Zografou Campus, 15780 Athens, Greece
Interests: materials; nanomaterials; process; Surface; Nanotubes; Nanoindentation; 3D printing; polymers; composites
Interests: materials; nanomaterials; process; Surface; Nanotubes; Nanoindentation; 3D printing; polymers; composites
Department of Food Chemistry and Biotechnology, Faculty of Chemistry, Brno University of Technology, Brno, Czech Republic
Interests: polymer chemistry; lignin and cellulose chemistry; polymer composites; bioplastics; thermal analysis; mechanical characterization; tissue engineering, biotechnology, and bioengineering; nanomaterials; biomaterials; biodegradable polymers
Interests: polymer chemistry; lignin and cellulose chemistry; polymer composites; bioplastics; thermal analysis; mechanical characterization; tissue engineering, biotechnology, and bioengineering; nanomaterials; biomaterials; biodegradable polymers
Laboratoire Sciences et Ingénierie de la Matière Molle, ESPCI Paris, PSL University, Sorbonne Université, CNRS, F-75005 Paris, France
Interests: materials chemistry; elastomers; nanocomposites; emulsions; foams; colloids; interfacial properties; mechanical properties; magnetic elastomers
Interests: materials chemistry; elastomers; nanocomposites; emulsions; foams; colloids; interfacial properties; mechanical properties; magnetic elastomers
Poznań University of Life Sciences, Poznań, Poland
Interests: bioactive compounds; functional food; food chemistry; food waste management; antioxidant capacity; pro-health food; novel food; chemical composition of food; protein; peptide composition; starch; food analysis; Green Energy; resistant starch; insects
Interests: bioactive compounds; functional food; food chemistry; food waste management; antioxidant capacity; pro-health food; novel food; chemical composition of food; protein; peptide composition; starch; food analysis; Green Energy; resistant starch; insects
Centre of Polymer and Carbon Materials, Polish Academy of Sciences, Zabrze, Poland
Interests: biocompatible and biodegradable polymers; polymer mass spectrometry; bioactive oligomers; controlled drug delivery systems; ring-opening polymerization; forensic engineering of advanced polymeric materials
Interests: biocompatible and biodegradable polymers; polymer mass spectrometry; bioactive oligomers; controlled drug delivery systems; ring-opening polymerization; forensic engineering of advanced polymeric materials
Department of Manufacturing Technology and Metrology, Kielce University of Technology, 25-314 Kielce, Poland
Interests: 3D printing; manufacturing; polymers; rheological properties; metrological analysis
Interests: 3D printing; manufacturing; polymers; rheological properties; metrological analysis
Dr. Ajay Krishnamurthy
Department of Chemistry and Biotechnology, Swinburne University of Technology; Hawthorn, VIC 3122, Australia
Interests: nanomaterials; fiber-reinforced polymer composites; polymers
Interests: nanomaterials; fiber-reinforced polymer composites; polymers
Department of Physics, Electrical Engineering and Applied Mechanics, Faculty of Wood Sciences and Technology, Technical University in Zvolen, Zvolen, Slovakia
Interests: wood composites; adhesives; thermal properties of wood; mechanical properties; furniture mechanical properties; cnc machining of wood; wood milling; wood dust; face milling; plywood; wood sanding; moisture; decay; modification; lignocellulosic materials
Interests: wood composites; adhesives; thermal properties of wood; mechanical properties; furniture mechanical properties; cnc machining of wood; wood milling; wood dust; face milling; plywood; wood sanding; moisture; decay; modification; lignocellulosic materials
Department of Numerical Methods and Computational Modeling, Alexander Dubcek University of Trencin, I. Krasku str., 491/30 Puchov, Slovakia
Interests: elastomer; polymer; tire; ANSYS; composites; computational modeling; testing; specific tests; determination of material parameters; 3D print
Interests: elastomer; polymer; tire; ANSYS; composites; computational modeling; testing; specific tests; determination of material parameters; 3D print
College of Material Science and Engineering, Zhejiang University of Technology, Hangzhou, China
Interests: polymer material molding and processing; microcellular foam molding; polymer material processing-structure-performance relationship under the action of complex external field during processing; high performance and functionalization of polymer blends and polymer composites; new technology of lightweight and functional supercritical microcellular foam molding
Interests: polymer material molding and processing; microcellular foam molding; polymer material processing-structure-performance relationship under the action of complex external field during processing; high performance and functionalization of polymer blends and polymer composites; new technology of lightweight and functional supercritical microcellular foam molding
Voevodsky Institute of Chemical Kinetics and Combustion of the Siberian Branch of the Russian Academy of Sciences (ICKC BS RAS), 630090, Institutskaya str. 3, Novosibirsk, Russia
Interests: kinetics; organic photovoltaics; kinetic modeling; EPR; chemical kinetics; electron spin resonance; spin relaxation; spectroscopy
Interests: kinetics; organic photovoltaics; kinetic modeling; EPR; chemical kinetics; electron spin resonance; spin relaxation; spectroscopy
