Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
George & Josephine Butler Polymer Research Laboratory, Center for Macromolecular Science & Engineering, Department of Chemistry, University of Florida, P.O. Box 117200, Gainesville, FL 32611, USA
Interests: polymer chemistry; material science; material engineering; sustainable chemistry; supramolecular chemistry; conjugated polymers; photochemistry; medicinal chemistry; vitrimer; curing; rheology
Interests: polymer chemistry; material science; material engineering; sustainable chemistry; supramolecular chemistry; conjugated polymers; photochemistry; medicinal chemistry; vitrimer; curing; rheology
Department of Metals Technology and Aviation Materials, Samara National Research University, Samara, Russia
Interests: high-entropy alloys; alloys, structure, deformation, external energy effects
Interests: high-entropy alloys; alloys, structure, deformation, external energy effects
Institute of Fundamental Technological Research Polish Academy of Sciences
Pawinskiego 5B Street; 02-106 Warsaw, Poland
Interests: electron microscopy; mechanical properties; materials characterization; coatings; fatigue; materials; powder metallurgy; titanium alloys; mechanical testing; hot stamping; nickel alloys; SEM analysis; hot forming
Interests: electron microscopy; mechanical properties; materials characterization; coatings; fatigue; materials; powder metallurgy; titanium alloys; mechanical testing; hot stamping; nickel alloys; SEM analysis; hot forming
Faculty of Materials Engineering and Physics, Cracow University of Technology, Kraków, Poland
Interests: material characterization; mechanical properties; material testing; circular economy; composite; fly ash; geopolymer; 3D printing; additive manufacturing; fiber
Interests: material characterization; mechanical properties; material testing; circular economy; composite; fly ash; geopolymer; 3D printing; additive manufacturing; fiber
Faculty of Electrical, Electronic, Computer and Control Engineering, Lodz University of Technology, 90-924 Lodz, Poland
Interests: sensors; thin films; materials characterization; coating technologies; wearable electronics; physical vacuum deposition
Interests: sensors; thin films; materials characterization; coating technologies; wearable electronics; physical vacuum deposition
Faculty of Civil Engineering and Architecture, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland
Interests: solid body mechanics; cracking mechanics; material strength
Interests: solid body mechanics; cracking mechanics; material strength
Faculty of Civil Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Zilina, Slovakia
Interests: concrete bridges and structures; reliability of bridges and structures (new and old); using FRP materials and fibre reinforced concrete for strengthening; durability of bridges and structures
Interests: concrete bridges and structures; reliability of bridges and structures (new and old); using FRP materials and fibre reinforced concrete for strengthening; durability of bridges and structures
Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Interests: fatigue; fracture mechanics; thermal spray; scanning electron microscopy
Interests: fatigue; fracture mechanics; thermal spray; scanning electron microscopy
Department of Metals Processing, Institute of Non-Ferrous Metals, Gliwice, Poland
Interests: additive manufacturing; microstructure; heat treatment; plastic deformation; lightweight alloys; copper alloys; pressure infiltration
Interests: additive manufacturing; microstructure; heat treatment; plastic deformation; lightweight alloys; copper alloys; pressure infiltration
dr. hab. eng. Grzegorz Kowaluk, associate professor
Warsaw University of Life Sciences - SGGW
Department of Technology and Entrepreneurship in Wood Industry
Nowoursynowska Str. 159
02-776 Warsaw
Poland
Interests: wood-based composite; fiber; panel; composite; glue; technology; cellulose
Interests: wood-based composite; fiber; panel; composite; glue; technology; cellulose
Electrochemistry, Corrosion and Materials Engineering Department, Gdansk University of Technology, Narutowicza 11/12 Str, PL-80-233 Gdansk, Poland
Interests: corrosion; coatings; corrosion inhibitors; stainless steels; corrosion protection
Interests: corrosion; coatings; corrosion inhibitors; stainless steels; corrosion protection
Institute of Solid State Physics, University of Latvia, Kengaraga Street 8, LV-1063 Riga, Latvia
Interests: material characterization; 3D printing; material-environment interaction; material structure-property relationships; mathematical modeling; polymers and composites; fibers; biomaterials; coatings; porous materials; sorbents
Interests: material characterization; 3D printing; material-environment interaction; material structure-property relationships; mathematical modeling; polymers and composites; fibers; biomaterials; coatings; porous materials; sorbents
The Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14 St., 80-231 Gdansk, Poland
Interests: pvd coatings; stainless steels; carbon steels; cavitation erosion; dynamic fracture
Interests: pvd coatings; stainless steels; carbon steels; cavitation erosion; dynamic fracture
Kirensky Institute of Physics, Federal Research Center KSC SB RAS, Krasnoyarsk, Russia
Interests: phase transitions; Raman spectroscopy; temperature; ferroelectrics; crystals; high pressure
Interests: phase transitions; Raman spectroscopy; temperature; ferroelectrics; crystals; high pressure
Department of Structural Engineering, Silesian University of Technology, Gliwice, Poland
Interests: structural concrete; prestressed concrete; composites in construction; composite reinforcement; geopolymer concrete; use of waste materials in concrete; lightweight concrete; foamed concrete; mechanical behavior of structural materials; 3D printing in construction
Interests: structural concrete; prestressed concrete; composites in construction; composite reinforcement; geopolymer concrete; use of waste materials in concrete; lightweight concrete; foamed concrete; mechanical behavior of structural materials; 3D printing in construction
Department of Applied Chemistry, Faculty of Engineering, Mie University, 1577 Kurimamachiyacho, Tsu 514-8507, Japan
Interests: mobile cross-linked polymers; functional organic/inorganic hybrids; sol-gel reactions; functional π-conjugated polymers; solid polymer electrolytes
Interests: mobile cross-linked polymers; functional organic/inorganic hybrids; sol-gel reactions; functional π-conjugated polymers; solid polymer electrolytes
.png)
BTU Cottbus/Senftenberg Institute of Environmental Science, Chair of Biotechnology of Water Treatment, Cottbus-Senftenberg, Germany
Interests: chemical engineering; environmental engineering; photochemistry; biodegradation; wastewater treatment; water treatment; biofilms; LC/MS; photodegradation; phosphonates; ozon; persistent substances
Interests: chemical engineering; environmental engineering; photochemistry; biodegradation; wastewater treatment; water treatment; biofilms; LC/MS; photodegradation; phosphonates; ozon; persistent substances
Faculty of Chemistry, Nicolaus Copernicus University in Toruń, 7, Gagarina Street, 87-100 Torun, Poland
Interests: water treatment; hybrid materials; membrane distillation; ceramic membranes; functionalization; membrane modification
Interests: water treatment; hybrid materials; membrane distillation; ceramic membranes; functionalization; membrane modification
Department of Organic Chemistry and Technology, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland
Interests: DFT; molecular electron density theory; cycloaddition; nitroalkenes; three atoms components
Interests: DFT; molecular electron density theory; cycloaddition; nitroalkenes; three atoms components
Department of Mechanical Engineering, Gachon University, 1342 Seongnamdaero, Sujeong-gu, Seongnam 13120, Republic of Korea
Interests: solar air heater; solar water heater; evacuated tube solar water; solar dryer; gaussian process, svm, and anfis; machine learning
Interests: solar air heater; solar water heater; evacuated tube solar water; solar dryer; gaussian process, svm, and anfis; machine learning
School of Mechanical Engineering, Kyungpook National University, Daegu-si 41566, Republic of Korea
Interests: environmental photocatalysis; photocatalytic dye degradation; TiO2-based photocatalysts; nanomaterials; material characterization; ferroelectric materials; ceramic materials; perovskite; magnetic materials and magnetism; BaTiO3; TiO2–CaCO3; NO; NO2; NOx
Interests: environmental photocatalysis; photocatalytic dye degradation; TiO2-based photocatalysts; nanomaterials; material characterization; ferroelectric materials; ceramic materials; perovskite; magnetic materials and magnetism; BaTiO3; TiO2–CaCO3; NO; NO2; NOx
Instituto Superior Técnico, University of Lisbon, Av. Rovisco Pais, 1049–001 Lisbon, Portugal
Interests: materials science; environmental impact; life cycle assessment; optimization; geopolymer concrete; construction and demolition waste; alkali-activated materials; supplementary cementitious materials; multi criteria analysis; green concrete; sustainable concrete and mortar; costs (economy)
Interests: materials science; environmental impact; life cycle assessment; optimization; geopolymer concrete; construction and demolition waste; alkali-activated materials; supplementary cementitious materials; multi criteria analysis; green concrete; sustainable concrete and mortar; costs (economy)
Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, Gliwice, Poland
Interests: biomaterials; biopolymers; mass spectrometry; pesticides; biodegradation; polyesters; transesterification; polyamides; anionic ring-opening polymerization; biopolyesters
Interests: biomaterials; biopolymers; mass spectrometry; pesticides; biodegradation; polyesters; transesterification; polyamides; anionic ring-opening polymerization; biopolyesters
Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Krakow, Poland
Interests: cytotoxicity; biomaterials; polymers; surface modification; biopolymers; coatings; biocompatibility; surface functionalization; magnetron sputtering; titanium alloys; PVD; magnesium alloys; aluminum alloys; corrosion resistance; plasma technique; PA CVD; plasmochemical modifications; thin layers; DLC structure; mechanical and tribological properties; anti-wear coatings
Interests: cytotoxicity; biomaterials; polymers; surface modification; biopolymers; coatings; biocompatibility; surface functionalization; magnetron sputtering; titanium alloys; PVD; magnesium alloys; aluminum alloys; corrosion resistance; plasma technique; PA CVD; plasmochemical modifications; thin layers; DLC structure; mechanical and tribological properties; anti-wear coatings
Department of Telecommunication Engineering, Faculty of Electrical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Interests: fixed access networks and technologies; transmission systems modeling; topology modeling; transmission media and topologies modeling; passive optical networks (PON)
Interests: fixed access networks and technologies; transmission systems modeling; topology modeling; transmission media and topologies modeling; passive optical networks (PON)
Department of Chemistry, University of Idaho, Moscow, ID, USA
Interests: organic synthesis; novel organic compounds; methodology; multi-step synthesis; energetic materials; green solid propellants; fuel blends; cage compounds; materials chemistry; dft-based calculations
Interests: organic synthesis; novel organic compounds; methodology; multi-step synthesis; energetic materials; green solid propellants; fuel blends; cage compounds; materials chemistry; dft-based calculations
1. Engineering Structures, Delft University of Technology, Delft, The Netherlands
2. Colegio de Ciencias e Ingenierías, Universidad San Francisco de Quito, Ecuador
Interests: structural engineering; concrete structures; bridge engineering; steel fiber reinforced concrete
2. Colegio de Ciencias e Ingenierías, Universidad San Francisco de Quito, Ecuador
Interests: structural engineering; concrete structures; bridge engineering; steel fiber reinforced concrete
Department of Civil, Chemical and Environmental Engineering, University of Genoa, 1211 Genoa, Italy
Interests: nanotechnology; nano-structured materials; multi-functional compounds; nanoparticles synthesis; crystalline hybrid material; thin film polymer; non-aqueous sol-gel; sem; TEM; fabricated composites
Interests: nanotechnology; nano-structured materials; multi-functional compounds; nanoparticles synthesis; crystalline hybrid material; thin film polymer; non-aqueous sol-gel; sem; TEM; fabricated composites
School of Materials Science and Engineering, The University of New South Wales (UNSW), Syndey, Australia
Interests: heat treatment of non-ferrous and ferrous alloys; modifying the microstructure; phase transformation; tribology; metal matrix composites; metallic glasses; and nanoindentation; cocrmo implant alloys
Interests: heat treatment of non-ferrous and ferrous alloys; modifying the microstructure; phase transformation; tribology; metal matrix composites; metallic glasses; and nanoindentation; cocrmo implant alloys
Department of Architectural Engineering, Keimyung University, Daegu 42601, Republic of Korea
Interests: materials science engineering; physics and astronomy; chemical engineering; computer science
Interests: materials science engineering; physics and astronomy; chemical engineering; computer science
