Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Department of Physical Chemistry, University of Bucharest, 4-12 Regina Elisabeta Blvd., 030018 Bucharest, Romania
Interests: pressure-sensitive adhesive; polymers; surfactants; polymer rheology; biopolymers
Interests: pressure-sensitive adhesive; polymers; surfactants; polymer rheology; biopolymers
Department of Biochemistry and Molecular Biology, Faculty of Biology, University of Bucharest, Bucharest, Romania
Interests: oxidative stress; biomaterials; nanoparticles; medical devices; photocatalysts
Interests: oxidative stress; biomaterials; nanoparticles; medical devices; photocatalysts
Faculty of Chemical Technology, Institute of Chemical Technology and Engineering, Politechnika Poznanska, Poznan, Poland
Interests: polymers; chemical engineering; nanomaterials; extraction; colloids; recycling; clean technology; water treatment; catalyst; membrane; ion exchange; adsorption; metal recovery; surfactants; separation; chemical technology; surface phenomena
Interests: polymers; chemical engineering; nanomaterials; extraction; colloids; recycling; clean technology; water treatment; catalyst; membrane; ion exchange; adsorption; metal recovery; surfactants; separation; chemical technology; surface phenomena
Department of Foundry Engineering, Silesian University of Technology, Towarowa 7 Str., 44-100 Gliwice, Poland
Interests: ductile cast iron; intermetallic phases; SiMo cast iron; silicon cast iron; continous casting; casting quality control; investment casting; cast iron corrosion; lost wax casting
Interests: ductile cast iron; intermetallic phases; SiMo cast iron; silicon cast iron; continous casting; casting quality control; investment casting; cast iron corrosion; lost wax casting
Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, 19 Armii Krajowej Av., 42-201 Czestochowa, Poland
Interests: new materials; stainless steels and cast steels; duplex steels and cast steels; plastic deformation; cast materials; cracks; wear; sintered materials; bimetallic materials; metallic composite
Interests: new materials; stainless steels and cast steels; duplex steels and cast steels; plastic deformation; cast materials; cracks; wear; sintered materials; bimetallic materials; metallic composite
AGH University of Science and Technology in Krakow, al. Adama Mickiewicza 30, 30-059 Kraków, Poland
Interests: manufacturing; machining; cutting processes; difficult-to-cut materials; superalloys; stainless steel
Interests: manufacturing; machining; cutting processes; difficult-to-cut materials; superalloys; stainless steel
Department of Building Materials and Diagnostics of Structures, Faculty of Civil Engineering, VSB-Technical University of Ostrava, Ludvíka Podéště 1875/17, 70800 Ostrava-Poruba, Czech Republic
Interests: mechanical properties; finite element method; nonlinear analysis; building materials; fiber reinforced concrete; experimental testing; civil engineering; fracture mechanics; reinforced concrete
Interests: mechanical properties; finite element method; nonlinear analysis; building materials; fiber reinforced concrete; experimental testing; civil engineering; fracture mechanics; reinforced concrete
1. Department of Infrastructure and Concrete Structures, RISE Research Institutes of Sweden, 501 15 Borås, Sweden
2. Department of Concrete Structures, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology, Gabriela Narutowicza 11/12, 80-233 Gdańsk, Poland
Interests: civil engineering; construction; building materials; concrete; fracture; numerical modeling; fibres; FRP reinforcement; textile reinforcement; concrete technology; lightweight concrete; micro-computed tomography; non-destructive testing; structural health monitoring; nanoparticles; carbon nanotubes; experimental methods; recycled aggregate; self-compacting concrete; ultra-high performance concrete; photocatalytic surfaces; prefabrication; sandwich panels; durability; maritime structures
2. Department of Concrete Structures, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology, Gabriela Narutowicza 11/12, 80-233 Gdańsk, Poland
Interests: civil engineering; construction; building materials; concrete; fracture; numerical modeling; fibres; FRP reinforcement; textile reinforcement; concrete technology; lightweight concrete; micro-computed tomography; non-destructive testing; structural health monitoring; nanoparticles; carbon nanotubes; experimental methods; recycled aggregate; self-compacting concrete; ultra-high performance concrete; photocatalytic surfaces; prefabrication; sandwich panels; durability; maritime structures
Center for Energy Materials Research, Korea Institute of Science and Technology, Hwarang-ro 14-gil 5, Seongbuk-gu, Seoul 02792, Republic of Korea
Interests: metallic materials for hydrogen energy (solid state hydrogen storage; hydrogen separation membrane; hydrogen embrittlement); high temperature creep behavior of metals (heat-resistant steels and superalloys/their welded part and heat affected zone
Interests: metallic materials for hydrogen energy (solid state hydrogen storage; hydrogen separation membrane; hydrogen embrittlement); high temperature creep behavior of metals (heat-resistant steels and superalloys/their welded part and heat affected zone
Mechanical Engineering, IT Convergence College of Materials and Components Engineering, Dong-Eui University, Busan 614-714, Republic of Korea
Interests: Molecular dynamics simulation; nanofluidics; nanoporous membrane; nanopore; water transport; electrolyte
Interests: Molecular dynamics simulation; nanofluidics; nanoporous membrane; nanopore; water transport; electrolyte
Department of Oral and Maxillofacial Surgery, Kagawa University School of Medicine, Kagawa 761-0701, Japan
Interests: deep learning; maxillofacial surgery; dental
Interests: deep learning; maxillofacial surgery; dental
Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czech Republic
Interests: thermomechanical fatigue; high temperature materials; metal fatigue; nickel-based superalloys; dislocation structures
Interests: thermomechanical fatigue; high temperature materials; metal fatigue; nickel-based superalloys; dislocation structures
Department of Civil, Architectural, and Environmental Engineering, University of Miami, FL, USA
Interests: cement chemistry; concrete technology; concrete durability; supplementary cementitious materials; chemical admixtures; infrastructure sustainability; alternative cementitious materials; novel infrastructure materials
Interests: cement chemistry; concrete technology; concrete durability; supplementary cementitious materials; chemical admixtures; infrastructure sustainability; alternative cementitious materials; novel infrastructure materials
Department of Mechanical and Industrial Engineering, Tallinn University of Technology (TalTech), Ehitajate tee 5, 19086 Tallinn, Estonia
Interests: abrasion; wear resistance; welding; soldering; brazing; friction; PVD; CVD; heat treatment; thermochemical treatment; thermomechanical treatment; thermal spraying
Interests: abrasion; wear resistance; welding; soldering; brazing; friction; PVD; CVD; heat treatment; thermochemical treatment; thermomechanical treatment; thermal spraying
Lublin University of Technology; Mechanical Engineering Faculty; Department of Materials Engineering
36D Nadbystrzycka Street, 20-618 Lublin, Poland
Interests: tribology; composites; erosion; friction; wear; welding; steel; cermets; abrasion; cobalt; additive manufacturing; thin film; fractography; microstructure; cavitation erosion; PVD; shot peening; failure analysis; thermal spraying; Ni; Ti; ion-implantation
Interests: tribology; composites; erosion; friction; wear; welding; steel; cermets; abrasion; cobalt; additive manufacturing; thin film; fractography; microstructure; cavitation erosion; PVD; shot peening; failure analysis; thermal spraying; Ni; Ti; ion-implantation
Faculty of Civil Engineering and Architecture, Lublin University of Technology, Nadbystrzycka 38D, 20-618 Lublin, Poland
Interests: nanotechnology; nanomaterials; mechanical properties; fractals; Image analysis; materials engineering; physical properties; cement; concrete technology; fibers; civil engineering; elevated temperature; structure of materials
Interests: nanotechnology; nanomaterials; mechanical properties; fractals; Image analysis; materials engineering; physical properties; cement; concrete technology; fibers; civil engineering; elevated temperature; structure of materials
Fraunhofer Institute for Nondestructive Testing IZFP, Campus E3.1, 66123 Saarbruecken, Germany
Interests: hysteresis; machine learning; materials characterization; fatigue; nondestructive testing; magnetic properties; residual stress; nondestructive evaluation; embrittlement; hardening; micromagnetics
Interests: hysteresis; machine learning; materials characterization; fatigue; nondestructive testing; magnetic properties; residual stress; nondestructive evaluation; embrittlement; hardening; micromagnetics
Faculty of Mechanical Engineering, Gdańsk University of Technology, Str. Narutowicza 11/12, 80-233 Gdańsk, Poland
Interests: environmental degradation of materials; materials charecterisation; wear of materials; borehole integration; cementing; swelling clays; drilling tools; cavitation phenomenon; cavitation erosion; nanoindentation test
Interests: environmental degradation of materials; materials charecterisation; wear of materials; borehole integration; cementing; swelling clays; drilling tools; cavitation phenomenon; cavitation erosion; nanoindentation test
Department of Photochemistry and Spectroscopy, Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, 01-224 Warsaw, Poland
Interests: cancer; biosensor; sensors; microfluidics; electronics; diagnostics; bacteria; liquid crystals; composites; soft matter; dielectrophoresis; electrocoalescence; SERS; PVD; polymer nanocomposite; microreactor; emulsion; femtosecond; SERS platfrom; SERS substrate
Interests: cancer; biosensor; sensors; microfluidics; electronics; diagnostics; bacteria; liquid crystals; composites; soft matter; dielectrophoresis; electrocoalescence; SERS; PVD; polymer nanocomposite; microreactor; emulsion; femtosecond; SERS platfrom; SERS substrate
Department of Mechanical Engineering, National Central University, Taoyuan 32001, Taiwan
Interests: surface chemistry; solar cells; nanofabrication; numerical analysis; wide band gap semiconductors; plasma; passivation; semiconductor process integration; film characterization; semiconductor thin film process (PVD, CVD, ALD, plating, MOCVD); PVD pulsed DC reactive sputtering AlN film related to residual stress; in-situ OES big data analysis relate to PCA, DOE; machine leaning (artificial intelligence); bonds (chemical); plasma diagnostics (OES, QMS. Langmuir probe); VIII-V semiconductors
Interests: surface chemistry; solar cells; nanofabrication; numerical analysis; wide band gap semiconductors; plasma; passivation; semiconductor process integration; film characterization; semiconductor thin film process (PVD, CVD, ALD, plating, MOCVD); PVD pulsed DC reactive sputtering AlN film related to residual stress; in-situ OES big data analysis relate to PCA, DOE; machine leaning (artificial intelligence); bonds (chemical); plasma diagnostics (OES, QMS. Langmuir probe); VIII-V semiconductors
Department of Mechanical Engineering, University of Canterbury, New Zealand
Interests: metallurgy and materials science; alloys and composites; welding and joining methods; microstructure and microscopy; phase characterization; additive manufacturing
Interests: metallurgy and materials science; alloys and composites; welding and joining methods; microstructure and microscopy; phase characterization; additive manufacturing
Department of Civil Engineering & Geomatics, Cheng Shiu University, Kaohsiung, Taiwan
Interests: concrete materials; lightweight aggregate concrete; neural networks
Interests: concrete materials; lightweight aggregate concrete; neural networks
Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Bologna, Italy
Interests: reclaimed asphalt pavement; alkali-activated materials; aphalt; recycled materials; asphalt Technology; road pavements; recycling of industrial wastes and by-products
Interests: reclaimed asphalt pavement; alkali-activated materials; aphalt; recycled materials; asphalt Technology; road pavements; recycling of industrial wastes and by-products
Department of Civil Engineering, University of Alicante, P.O. Box 99, E-03080 Alicante, Spain
Interests: concrete; waste; mortars; lightweight concrete
Interests: concrete; waste; mortars; lightweight concrete
Laser Research Consortìtium-CALEF C/O ENEA, Rome, Italy
Interests: titanium; aluminium; rolling; extrusion; special steels; additive manufacturing; powder metallurgy; hip; hot forging
Interests: titanium; aluminium; rolling; extrusion; special steels; additive manufacturing; powder metallurgy; hip; hot forging
CICECO-Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
Interests: high-k dielectrics; ferroelectrics; magnetoelectrics; oxide thermoelectrics; electroceramics
Interests: high-k dielectrics; ferroelectrics; magnetoelectrics; oxide thermoelectrics; electroceramics
VSB – Technical University of Ostrava, Ostrava, Czech Republic
Interests: continuous casting of steel; steelmaking; ANSYS fluent; steel ingot casting; secondary metalurgy of steel; tundish metalurgy; numerical modelling in CFD programmes; ProCAST; determination of thermophysical properties (DTA; termodynamic databases)
Interests: continuous casting of steel; steelmaking; ANSYS fluent; steel ingot casting; secondary metalurgy of steel; tundish metalurgy; numerical modelling in CFD programmes; ProCAST; determination of thermophysical properties (DTA; termodynamic databases)
Faculty of Civil Engineering and Building Services, Gheorghe Asachi Technical University of Iasi, 700050 Iași, Romania
Interests: hwangtoh; concrete, concrete structures, strength, earthquake engineering, dynamic identification, sustainability, eco-materials; material properties; mix proportion design; ICR
Interests: hwangtoh; concrete, concrete structures, strength, earthquake engineering, dynamic identification, sustainability, eco-materials; material properties; mix proportion design; ICR
Faculty of Mechanical Engineering, University of Science and Technology, Al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland
Interests: fatigue; failure analysis; experimental testing; mechanical properties; numerical simulations (FEM); machine design
Interests: fatigue; failure analysis; experimental testing; mechanical properties; numerical simulations (FEM); machine design
Mechanical Engineering Department, Escola d’Enginyeria de Barcelona Est, Universitat Politècnica de Catalunya, Avinguda d’Eduard Maristany, 10–14, 08019 Barcelona, Spain
Interests: burnishing; vibration-assisted processes; machining; manufacturing; additive manufacturing; mechanical properties characterization
Interests: burnishing; vibration-assisted processes; machining; manufacturing; additive manufacturing; mechanical properties characterization
