Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
School of Computing, Engineering, and Intelligent Systems, Ulster University, Magee Campus, Northland Road, Derry/Londonderry, Northern Ireland BT48 7JL, UK
Interests: modeling; additive manufacturing; finite element analysis; simulation
Interests: modeling; additive manufacturing; finite element analysis; simulation
Research Center, University of Žilina, Univerzitna 8215/1, 010 26 Žilina, Slovakia
Interests: structural materials; fracture mechanics; welding; steel structures; concrete structures; structural integrity
Interests: structural materials; fracture mechanics; welding; steel structures; concrete structures; structural integrity
Ovidius University of Constanta, Faculty of Mechanical, Industrial and Maritime Engineering, 124 Mamaia Ave, 900527 Constanta, Romania
Interests: materials science and engineering; material characterisation; titanium alloys; bio-nano-materials for hard tissue implants; biodegradable alloys; thermo-mechanical processing of metallic materials
Interests: materials science and engineering; material characterisation; titanium alloys; bio-nano-materials for hard tissue implants; biodegradable alloys; thermo-mechanical processing of metallic materials
Department of Materials Science, Rzeszow University of Technology, Al. Powstanców Warszawy 12, 35-959 Rzeszow, Poland
Interests: thermal barrier coatings; high temperature oxidation; protective coatings; high temperature materials; corrosion resistance; oxide scales
Interests: thermal barrier coatings; high temperature oxidation; protective coatings; high temperature materials; corrosion resistance; oxide scales
Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, Warsaw, Poland
Interests: material characterization; magnetic materials; magnetic properties; magnetoelastic effect; stressimpedance; magnetism; measurement systems; sensors; metrology; thermoelectricity; NDT; gmi; thermography; open source software
Interests: material characterization; magnetic materials; magnetic properties; magnetoelastic effect; stressimpedance; magnetism; measurement systems; sensors; metrology; thermoelectricity; NDT; gmi; thermography; open source software
Faculty of Civil Engineering, Department of Building Materials and Processes Engineering, Silesian University of Technology, Gliwice, Poland
Interests: heat and mass transfer; building acoustics; concrete; building materials; sound absorption; reverberation time; speech transmission index
Interests: heat and mass transfer; building acoustics; concrete; building materials; sound absorption; reverberation time; speech transmission index
LMA Laboratoire de Mécanique et d'Acoustique, Marseille, France
Interests: porous materials; ultrasound; inverse problem; first principles calculations; vibroacoustic; binary fe-ti, ti-al, fe-al and ternary fe-ti-al alloys; resonant ultrasound vibration; elastodynamic model; direct and inverse problems
Interests: porous materials; ultrasound; inverse problem; first principles calculations; vibroacoustic; binary fe-ti, ti-al, fe-al and ternary fe-ti-al alloys; resonant ultrasound vibration; elastodynamic model; direct and inverse problems
Department of Materials Design Innovation Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
Interests: material characterization; materials; mechanical properties; mechanical behavior of materials
Interests: material characterization; materials; mechanical properties; mechanical behavior of materials
Department of Removable Prosthodontics and Occlusion, Osaka Dental University, 1 Chome-4-4 Makinohonmachi, Hirakata 573-1144, Osaka, Japan
Interests: biomaterial; in vitro analysis; titanium; implant; nano materials; zirconia; antibacterial material; in vivo analysis; QCM analysis; denture material; denture cleaner
Interests: biomaterial; in vitro analysis; titanium; implant; nano materials; zirconia; antibacterial material; in vivo analysis; QCM analysis; denture material; denture cleaner
Faculdade de Ciências e Tecnologias, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
Interests: shape memory alloys; welding; X-ray diffraction; additive manufacturing; SEM; characterization techniques; TEM
Interests: shape memory alloys; welding; X-ray diffraction; additive manufacturing; SEM; characterization techniques; TEM
1. Department of Materials Science and Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
2. MTA-BME Lendület Composite Metal Foams Research Group, Műegyetem rkp. 3., H-1111 Budapest, Hungary
Interests: fatigue; metal matrix composites; fracture mechanics; mechanical testing; metallic foams
2. MTA-BME Lendület Composite Metal Foams Research Group, Műegyetem rkp. 3., H-1111 Budapest, Hungary
Interests: fatigue; metal matrix composites; fracture mechanics; mechanical testing; metallic foams
Department of Civil Engineering, University of Alicante, P.O. Box 99, E-03080 Alicante, Spain
Interests: sustainability assessment; mechanical properties; durability; microstructure; non-destructive characterization; sustainable construction and building materials; new supplementary cementitious materials; performance of eco-friendly materials and structures exposed to real hardening environments and non-optimum exposure conditions
Interests: sustainability assessment; mechanical properties; durability; microstructure; non-destructive characterization; sustainable construction and building materials; new supplementary cementitious materials; performance of eco-friendly materials and structures exposed to real hardening environments and non-optimum exposure conditions
Faculty of Mining and Geoengineering, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Cracow, Poland
Interests: morphology; self-compacting concrete; flowability; coarse aggregate; fibre-reinforcement, cfrp
Interests: morphology; self-compacting concrete; flowability; coarse aggregate; fibre-reinforcement, cfrp
Department of Mechanics and Machine Design, Faculty of Mechanical Engineering, Opole University of Technology, Mikołajczyka 5, 45-271 Opole, Poland
Interests: fatigue; simulation; FEM; modelling; stress and strain
Interests: fatigue; simulation; FEM; modelling; stress and strain
Centre of Polymer Systems, Tomas Bata University in Zlin, Zlin, Czech Republic
Interests: biomaterials; tissue engineering; metallic implants; polymeric implants; surface coating; plasma treatment; thin film deposition; titanium alloys; nanomaterials; nanostructured materials; hydrogels; polymeric scaffolds; drug delivery systems; 3D bioprinting
Interests: biomaterials; tissue engineering; metallic implants; polymeric implants; surface coating; plasma treatment; thin film deposition; titanium alloys; nanomaterials; nanostructured materials; hydrogels; polymeric scaffolds; drug delivery systems; 3D bioprinting
Catalysis Lab, National University of Science and Technology MISiS, Leninskiy Avenue 4, 119049 Moscow, Russia
Interests: additive manufacturing; laser powder ped fusion; selective laser melting; composites; metal matrix composites; mechanical properties; fracture; composite structures; fracture toughness; materials characterization
Interests: additive manufacturing; laser powder ped fusion; selective laser melting; composites; metal matrix composites; mechanical properties; fracture; composite structures; fracture toughness; materials characterization
Department of Chemistry, The University of Texas at Austin, Austin, TX, USA
Interests: drug delivery; polymer brush; soft matter; polymer physics; biophysics; disordered protein; computational chemistry; MD simulation; polymer-grafted nanoparticle; binary polymer brush
Interests: drug delivery; polymer brush; soft matter; polymer physics; biophysics; disordered protein; computational chemistry; MD simulation; polymer-grafted nanoparticle; binary polymer brush
Department of Manufacturing Engineering, Technical University of Cluj-Napoca, 400114 Cluj-Napoca, Romania
Interests: additive manufacturing; 3D printing; hybrid manufacturing; cnc manufacturing; CAD / CAM / CAE (computer aided design / computer aided manufacturing / computer aided engineering); non conventional manufacturing technologies
Interests: additive manufacturing; 3D printing; hybrid manufacturing; cnc manufacturing; CAD / CAM / CAE (computer aided design / computer aided manufacturing / computer aided engineering); non conventional manufacturing technologies
Slovak University of Technology
Faculty of Materials Science and Technology
J. Bottu 25
91724 Trnava
Slovakia
Interests: ceramics; corrosion; oxidation; reaction kinetics; metals; diffusion; machining; harvesting; inquiry-based learning
Interests: ceramics; corrosion; oxidation; reaction kinetics; metals; diffusion; machining; harvesting; inquiry-based learning
Department of Chemical Engineering, University of the Basque Country UPV/EHU, Bilbao, Spain
Interests: catalysis; waste management; catalytic cracking; hydroprocessing; fuel production
Interests: catalysis; waste management; catalytic cracking; hydroprocessing; fuel production
Department of Chemistry and Corrosion of Metals, Faculty of Foundry Engineering, AGH University of Science and Technology, 30-059 Krakow, Poland
Interests: erosion-corrosion; corrosion coatings; corrosion inhibition; corrosion Inhibitors; CO2 corrosion; biocorrosion; coatings; high temperature and high pressure corrosion
Interests: erosion-corrosion; corrosion coatings; corrosion inhibition; corrosion Inhibitors; CO2 corrosion; biocorrosion; coatings; high temperature and high pressure corrosion
State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China
Interests: bulk metallic glasses; alloy development; high entropy alloys; Ti alloys; metal plastic forming
Interests: bulk metallic glasses; alloy development; high entropy alloys; Ti alloys; metal plastic forming
School of Chemistry, Chemical Engineering and Biotechnology, Nanyang Technological University, Singapore 637459, Singapore
Interests: biomaterials; polymer synthesis; bioprinting; 3D printing; 4D printing
Interests: biomaterials; polymer synthesis; bioprinting; 3D printing; 4D printing
ELKEME-Hellenic Research Centre for Metals S.A., Athens, Greece
Interests: corrosion; tribology; surface engineering; metallography; fracture mechanics; materials processing; quality assurance; design of experiments; fractography; failure analysis; manufacturing technology; scanning electron microscopy; machinability; fracture analysis; mechanical behaviour of materials
Interests: corrosion; tribology; surface engineering; metallography; fracture mechanics; materials processing; quality assurance; design of experiments; fractography; failure analysis; manufacturing technology; scanning electron microscopy; machinability; fracture analysis; mechanical behaviour of materials
Section of Metallurgy and Materials Technology, School of Mining and Metallurgical Engineering, National Technical University of Athens (NTUA), 9 Iroon Polytechniou Str., GR-157 80 Zografou Campus, Athens, Greece
Interests: copper; metals; aluminium; steel; heat treatment; forming; rolling; microstructure-property relationships; ultra fast annealing
Interests: copper; metals; aluminium; steel; heat treatment; forming; rolling; microstructure-property relationships; ultra fast annealing
National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Japan
Interests: nanomaterial; wastewater treatment; environmental remediation; adsorption; metal removal; nitrogen recycling
Interests: nanomaterial; wastewater treatment; environmental remediation; adsorption; metal removal; nitrogen recycling
Department of Prosthodontics, College of Dentistry, Yonsei University, Seoul 03722, Republic of Korea
Interests: digital dentistry
Interests: digital dentistry
Civil and Environmental Engineering Department, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
Interests: NMR spectroscopy; X-ray diffraction; durability; cementitious materials; characterization; geopolymer; alkali-activated materials; thermodynamic modeling
Interests: NMR spectroscopy; X-ray diffraction; durability; cementitious materials; characterization; geopolymer; alkali-activated materials; thermodynamic modeling
Department of Civil, Environmental and Architectural Engineering,
Università degli Studi di Padova, Padova, Veneto, Italy
Interests: pavement engineering; asphalt materials
Interests: pavement engineering; asphalt materials
Faculty of Manufacturing and Mechanical Engineering Technology, Department of Engineering Technology and Industrial Distribution, Texas A&M University, College Station, TX, USA
Interests: aircraft design; additive manufacturing; design of experiments; fused deposition modeling; modular design; solid-propellant rocket
Interests: aircraft design; additive manufacturing; design of experiments; fused deposition modeling; modular design; solid-propellant rocket
