applsci-logo

Journal Browser

Journal Browser

Novel Methods and Technologies for Intelligent Vehicles: 2nd Edition

A special issue of Applied Sciences (ISSN 2076-3417). This special issue belongs to the section "Transportation and Future Mobility".

Deadline for manuscript submissions: 20 December 2024 | Viewed by 7435

Special Issue Editors


E-Mail Website
Guest Editor
Intelligent Transportation Systems Research Center, Wuhan University of Technology, Wuhan 430070, China
Interests: intelligent vehicle; artificial intelligence; traffic safety; vehicle behavior recognition; machine learning; intelligent transportation systems
Special Issues, Collections and Topics in MDPI journals

E-Mail Website
Guest Editor
School of Management, Wuhan University of Technology, Wuhan 430070, China
Interests: big data analytics in sustainable operations management; socially-responsible AI; green technological innovation; eco-friendly transportation
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Intelligent vehicle (IV) is a comprehensive system that integrates functions such as environment perception, planning, and decision making, and multi-level assisted driving. It concentrates on the technologies of computer, modern sensing, information fusion, communication, artificial intelligence, and automatic control, etc.

The improvement of the intelligence level of IV can enhance traffic safety and efficiency effectively. In recent years, with the development of hardware and software, the technology of Intelligent Connected Vehicle (ICV) has achieved rapid progress. However, there are many critical and difficult issues that remain to be addressed.

This special issue is dedicated to papers focusing on novel methods and technologies for intelligent vehicles. Researchers from both academia and industry are welcomed to submit unpublished research work related to the perception, decision-making and control, and other key technologies of IV. This includes but is not limited to the following: Intelligent Connected Vehicles; Artificial Intelligence; Navigation and Localization; Environmental Perception; Cooperative Vehicle Infrastructure Systems; Data Fusion; Driver-autonomous Integration Cooperative Driving; Decision-making and Planning; Vehicle Dynamics Control.

Dr. Zhijun Chen
Dr. Yishi Zhang
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Applied Sciences is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • intelligent connected vehicles
  • artificial intelligence
  • navigation and localization
  • environmental perception
  • cooperative vehicle infrastructure systems
  • data fusion
  • driver-autonomous integration cooperative driving
  • decision-making and planning
  • vehicle dynamics control

Benefits of Publishing in a Special Issue

  • Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
  • Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
  • Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
  • External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
  • e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (5 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

15 pages, 3650 KiB  
Article
A New Hybrid Hierarchical Roadside Unit Deployment Scheme Combined with Parking Cars
by Hongming Li, Yuqing Ji and Ziwei Wang
Appl. Sci. 2024, 14(16), 7032; https://doi.org/10.3390/app14167032 - 10 Aug 2024
Viewed by 788
Abstract
This paper proposes a new hybrid hierarchical roadside unit (RSU) deployment algorithm that combines traditional RSU deployment strategies with temporary RSUs (t-RSUs) selected from many parked vehicles. The driving vehicles in the corresponding RSU coverage section are divided into clusters and the demand [...] Read more.
This paper proposes a new hybrid hierarchical roadside unit (RSU) deployment algorithm that combines traditional RSU deployment strategies with temporary RSUs (t-RSUs) selected from many parked vehicles. The driving vehicles in the corresponding RSU coverage section are divided into clusters and the demand is thus summarized. We first solve the problem of how to choose the appropriate cars serving as t-RSUs and then optimize the RSU deployment with the dynamic existing t-RSUs. We simulate the deployment application in a downtown area of Shanghai, China, using the simulation of urban mobility (SUMO), version 1.11.0, an open-source traffic simulation package, and its traffic-control interface (TraCI) with Python. The simulation results show that, within a given economic cost, the proposed hybrid hierarchical RSU deployment algorithm outperforms the maximum vehicle coverage deployment algorithm (MVCD) and the random deployment algorithm (RandDeploy) in terms of overall vehicle coverage and point-to-point vehicle connectivity ratio. Our scheme provides new solutions and ideas for the deployment of RSUs in future urban traffic environments. Full article
(This article belongs to the Special Issue Novel Methods and Technologies for Intelligent Vehicles: 2nd Edition)
Show Figures

Figure 1

21 pages, 7039 KiB  
Article
Simple Ultrasonic-Based Localization System for Mobile Robots
by Marek Sukop, Maksym Grytsiv, Rudolf Jánoš and Ján Semjon
Appl. Sci. 2024, 14(9), 3625; https://doi.org/10.3390/app14093625 - 25 Apr 2024
Cited by 1 | Viewed by 609
Abstract
This paper presents the development and validation of a cost-efficient and uncomplicated real-time localization system (RTLS) for use in mobile robotics, specifically within indoor and storage environments. By harnessing ultrasonic waves to measure distances from three beacons, the system provides stable and reliable [...] Read more.
This paper presents the development and validation of a cost-efficient and uncomplicated real-time localization system (RTLS) for use in mobile robotics, specifically within indoor and storage environments. By harnessing ultrasonic waves to measure distances from three beacons, the system provides stable and reliable localization. This method utilizes the time-of-flight (TOF) principle, allowing for accurate distance calculations with simple microcontrollers. The system is designed to update the robot’s position at a frequency of at least 10 times per second, ensuring smooth navigation. Our trilateration-based approach allows for the precise determination of the robot’s position with a notable standard deviation accuracy of up to 15 mm. The aim was to design a simple yet sufficiently accurate system and verify its precision through experimental measurements. The experimental results demonstrate the system’s efficacy and lay a solid foundation for advancing this technology. Furthermore, the cost for the components required to build this indoor localization system (ILS) with three beacons and one tag is remarkably low, under EUR 80. Full article
(This article belongs to the Special Issue Novel Methods and Technologies for Intelligent Vehicles: 2nd Edition)
Show Figures

Figure 1

16 pages, 1669 KiB  
Article
Spatio-Temporal-Attention-Based Vehicle Trajectory Prediction Considering Multi-Vehicle Interaction in Mixed Traffic Flow
by Jie Zeng, Yue Ren, Kan Wang, Xiong Hu and Jiufa Li
Appl. Sci. 2024, 14(1), 161; https://doi.org/10.3390/app14010161 - 24 Dec 2023
Cited by 3 | Viewed by 1183
Abstract
As a link connecting the environmental perception system and the decision-making system, accurate obstacle trajectory prediction provides a reliable guarantee of correct decision-making by autonomous vehicles. Oriented toward a mixed human-driven and machine-driven traffic environment, a vehicle trajectory prediction algorithm based on an [...] Read more.
As a link connecting the environmental perception system and the decision-making system, accurate obstacle trajectory prediction provides a reliable guarantee of correct decision-making by autonomous vehicles. Oriented toward a mixed human-driven and machine-driven traffic environment, a vehicle trajectory prediction algorithm based on an encoding–decoding framework composed of a multiple-attention mechanism is proposed. Firstly, a directed graph is used to describe vehicle–vehicle motion dependencies. Then, by calculating the repulsive force between vehicles using a priori edge information based on the artificial potential field theory, vehicle–vehicle interaction coefficients are extracted via a graph attention mechanism (GAT). Subsequently, after concatenating the vehicle–vehicle interaction feature with the encoded vehicle trajectory vectors, a spatio-temporal attention mechanism is applied to determine the coupling relationship of hidden vectors. Finally, the predicted trajectory is generated by a gated recurrent unit (GRU) decoder. The training and evaluation of the proposed model were conducted on the NGSIM public dataset. The test results demonstrated that compared with existing baseline models, our approach has fewer prediction errors and better robustness. In addition, introducing artificial potential fields into the attention mechanism causes the model to have better interpretability. Full article
(This article belongs to the Special Issue Novel Methods and Technologies for Intelligent Vehicles: 2nd Edition)
Show Figures

Figure 1

26 pages, 4128 KiB  
Article
Blockchain-Based Multistage Continuous Authentication for Smart Devices
by Yue Yao, Xiaomei Zhang, Haomin Hu, Huibin Liu, Rong Huang and Zejie Wang
Appl. Sci. 2023, 13(23), 12641; https://doi.org/10.3390/app132312641 - 24 Nov 2023
Viewed by 1130
Abstract
With the increasing connectivity between multiple smart devices in the Internet of Vehicles, privacy and security have become stringent threats due to unauthorized access. To overcome this issue, designing continuous authentication systems has become an important research topic because of the advantages of [...] Read more.
With the increasing connectivity between multiple smart devices in the Internet of Vehicles, privacy and security have become stringent threats due to unauthorized access. To overcome this issue, designing continuous authentication systems has become an important research topic because of the advantages of continuous monitoring of users after the initial access to the smart devices. Unfortunately, the existing systems are based on a third-party centralized structure, and most of them suffer storage pressure on equipment, thus resulting in significant security hazards and limited performance. In this paper, we propose a multistage continuous authentication system based on blockchain technology and the IPFS, which achieves decentralization and reduces storage pressure. In the first stage of authentication, we adopt Hyperledger Fabric to implement the underlying technical architecture of the blockchain to enhance the security and reliability of identity parameters. The preoutputs of the first-stage authentication are compared against behavioral biometric characteristics stored in the IPFS that aim to accomplish the final authentication. In particular, we use fuzzy extractors to deal with behavioral biometric feature templates, thus solving the privacy problem caused by user information leakage. To evaluate the security of our system, we prove the correctness of the communication protocol and two-way authentication of the scheme using BAN Logic. Furthermore, we use Hyperledger Caliper to analyze the impact of the sending rate of authentication requests on various performance parameters such as throughput, memory, and CPU utilization of the authentication system. Security and experimental results show that: (i) We solve the problem of centralized authentication and can resist replay attacks. (ii) Our scheme can maintain high throughput and effectively reach consensus. Compared to related works, the throughput is improved by 8.6%. Full article
(This article belongs to the Special Issue Novel Methods and Technologies for Intelligent Vehicles: 2nd Edition)
Show Figures

Figure 1

19 pages, 2288 KiB  
Article
Anomaly Detection for Automated Vehicles Integrating Continuous Wavelet Transform and Convolutional Neural Network
by Liyuan Wang and Xiaomei Zhang
Appl. Sci. 2023, 13(9), 5525; https://doi.org/10.3390/app13095525 - 28 Apr 2023
Cited by 5 | Viewed by 1866
Abstract
Connected and automated vehicles (CAVs) involving massive advanced sensors and electronic control units (ECUs) bring intelligentization to the transportation system and conveniences to human mobility. Unfortunately, these automated vehicles face security threats due to complexity and connectivity. Especially, the existing in-vehicle network protocols [...] Read more.
Connected and automated vehicles (CAVs) involving massive advanced sensors and electronic control units (ECUs) bring intelligentization to the transportation system and conveniences to human mobility. Unfortunately, these automated vehicles face security threats due to complexity and connectivity. Especially, the existing in-vehicle network protocols (e.g., controller area network) lack security consideration, which is vulnerable to malicious attacks and puts people at large-scale severe risks. In this paper, we propose a novel anomaly detection model that integrates a continuous wavelet transform (CWT) and convolutional neural network (CNN) for an in-vehicle network. By transforming in-vehicle sensor signals in different segments, we adopt CWT to calculate wavelet coefficients for vehicle state image construction so that the model exploits both the time and frequency domain characteristics of the raw data, which can demonstrate more hidden patterns of vehicle events and improve the accuracy of the follow-up detection process. Our model constructs a two-dimensional continuous wavelet transform scalogram (CWTS) and utilizes it as an input into our optimized CNN. The proposed model is able to provide local transient characteristics of the signals so that it can detect anomaly deviations caused by malicious behaviors, and the model is effective for coping with various vehicle anomalies. The experiments show the superior performance of our proposed model under different anomaly scenarios. Compared with related works, the average accuracy and F1 score are improved by 2.51% and 2.46%. Full article
(This article belongs to the Special Issue Novel Methods and Technologies for Intelligent Vehicles: 2nd Edition)
Show Figures

Figure 1

Back to TopTop