Next Article in Journal
Weldability of 316L Parts Produced by Metal Additive Manufacturing
Next Article in Special Issue
Theoretical Analysis of Rolling Force during Cold Rolling with Roll Crossing and Shifting System
Previous Article in Journal
Experimental Investigation on the Cutting of Additively Manufactured Ti6Al4V with Wire-EDM and the Analytical Modelling of Cutting Speed and Surface Roughness
Previous Article in Special Issue
An Experimental and Numerical Study on Aluminum Alloy Tailor Heat Treated Blanks
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2023, 7(2), 70; https://doi.org/10.3390/jmmp7020070
Action Date Notes Link
article pdf uploaded. 19 March 2023 08:17 CET Version of Record https://www.mdpi.com/2504-4494/7/2/70/pdf-vor
article xml uploaded. 20 March 2023 03:55 CET Original file https://www.mdpi.com/2504-4494/7/2/70/xml
article pdf uploaded. 20 March 2023 03:55 CET Updated version of record https://www.mdpi.com/2504-4494/7/2/70/pdf
article html file updated 20 March 2023 03:56 CET Original file -
article html file updated 6 April 2023 20:49 CEST Update https://www.mdpi.com/2504-4494/7/2/70/html
Back to TopTop