Next Article in Journal
Machining Ti-6Al-4V Alloy Using Nano-Cutting Fluids: Investigation and Analysis
Next Article in Special Issue
Influence of a Discontinuous Process Strategy on Microstructure and Microhardness in Drilling Inconel 718
Previous Article in Journal
Work Envelope Expansion and Parametric Optimization in WAAM with Relative Density and Surface Aspect as Quality Constraints: The Case of Al5Mg Thin Walls with Active Cooling
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2021, 5(2), 41; https://doi.org/10.3390/jmmp5020041
Action Date Notes Link
article xml file uploaded 26 April 2021 12:08 CEST Original file -
article xml uploaded. 26 April 2021 12:08 CEST Update https://www.mdpi.com/2504-4494/5/2/41/xml
article pdf uploaded. 26 April 2021 12:08 CEST Version of Record https://www.mdpi.com/2504-4494/5/2/41/pdf
article html file updated 26 April 2021 12:09 CEST Original file -
article html file updated 26 July 2022 16:52 CEST Update https://www.mdpi.com/2504-4494/5/2/41/html
Back to TopTop