Next Article in Journal
Balancing WAAM Production Costs and Wall Surface Quality through Parameter Selection: A Case Study of an Al-Mg5 Alloy Multilayer-Non-Oscillated Single Pass Wall
Previous Article in Journal
Experimental and Numerical Investigation of the Influence of Process Parameters in Incremental Sheet Metal Forming on Residual Stresses
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2019, 3(2), 33; https://doi.org/10.3390/jmmp3020033
Action Date Notes Link
article xml file uploaded 16 April 2019 09:53 CEST Original file -
article xml uploaded. 16 April 2019 09:53 CEST Update https://www.mdpi.com/2504-4494/3/2/33/xml
article pdf uploaded. 16 April 2019 09:53 CEST Version of Record https://www.mdpi.com/2504-4494/3/2/33/pdf
article html file updated 16 April 2019 09:54 CEST Original file -
article html file updated 25 April 2019 11:08 CEST Update -
article html file updated 18 October 2019 10:03 CEST Update -
article html file updated 12 February 2020 05:36 CET Update -
article html file updated 19 July 2022 17:35 CEST Update https://www.mdpi.com/2504-4494/3/2/33/html
Back to TopTop