Erratum: Labelle, A., et al. Agent-Based Model for End-of-Life Product Flow Analysis, Resources 2018, 7, 42

Alexandre Labelle; Jean-Marc Frayret

doi:10.3390/resources8010023

and

Département de Mathématiques et Génie Industriel, École Polytechnique de Montréal, 2900 Boulevard Edouard-Montpetit, Montréal, QC H3T 1J4, Canada

^*

Author to whom correspondence should be addressed.

Resources2019, 8(1), 23;https://doi.org/10.3390/resources8010023

Version Notes

Order Reprints

The authors wish to make the following corrections to this paper [1]: On page 11, there are six “(%)” in the table headers that should be deleted.

The authors would like to apologize for any inconvenience caused to the readers by this change. The change does not affect the scientific results. The manuscript will be updated and the original will remain online on the article’s webpage.

Reference

Labelle, A.; Frayret, J.-M. Agent-Based Model for End-of-Life Product Flow Analysis. Resources 2018, 7, 42. [Google Scholar] [CrossRef]

© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Erratum: Labelle, A., et al. Agent-Based Model for End-of-Life Product Flow Analysis, Resources 2018, 7, 42

Reference

Article Metrics

Citations

Article Access Statistics