Nanoporous materials are outstanding platforms due to their unique chemical and physical properties at the nanoscale, which make them suitable candidates to develop advanced materials and systems for a plethora of applications, including catalysis and photocatalysis [1,2,3,4,5,6,7], energy harvesting and storage [8], photonics and optoelectronics [9,10], nanomedicine [11,12,13,14,15], and filtration and separation [16,17,18]. Among different methods, electrochemical fabrication techniques offer many advantages over conventional nanofabrication methods to produce nanoporous materials with precisely engineered properties, such as controllability, reproducibility, high resolution, scalability, high-throughput, cost-competitiveness, and time-efficient processes. Despite numerous advances in this area, electrochemical engineering of nanoporous materials remains a highly dynamic and broad research field that continues to enable excellent opportunities for further trans-disciplinary fundamental and applied research.
In this context, this Special Issue of Nanomaterials collates a series of illustrative examples on several fundamental aspects and inter-disciplinary applications of nanoporous materials produced by different electrochemical and chemical methods, from energy to drug delivery. It is thus expected that the field of electrochemically engineered nanoporous materials will continue to grow and spread towards more sophisticated applications. Metallic and semiconductor nanoporous materials can enable the precise control of light–matter interactions, such as surface plasmon resonance, photonic crystal and slow photon effect at the nanoscale for optical sensing and biosensing, energy harvesting, and environmental remediation applications. Nanoporous materials with well-defined nanostructures enable new opportunities to study molecular interactions to develop advanced materials with unique chemical and physical properties for ultra-efficient separation and filtration processes, such as water desalination. Nanoporous materials based on inert and non-cytotoxic materials provide an excellent matrix to load and accommodate therapeutics, which can be passively or actively released by local or remote triggers in a timely fashion for personalised medical therapies. These structures also provide unique template platforms for the synthesis of other nanostructures with controlled geometric features.
Finally, I would like to thank all authors of this Special Issue of Nanomaterials for their contributions and all referees for their valuable comments, suggestions and time, as well as the editorial office for their constant and swift support throughout.
Funding
The author thanks the support provided by the Australian Research Council (ARC) through the grant number CE140100003, the School of Chemical Engineering, the University of Adelaide (DVCR ‘Research for Impact’ initiative), the Institute for Photonics and Advanced Sensing (IPAS), and the ARC Centre of Excellence for Nanoscale BioPhotonics (CNBP).
Conflicts of Interest
The author declares no conflict of interest.
References
- Hu, Y.S.; Guo, Y.G.; Single, W.; Hore, S.; Balaya, P.; Maier, J. Electrochemical lithiation synthesis of nanoporous materials with superior catalytic and capacitive activity. Nat. Mater. 2006, 5, 713–717. [Google Scholar] [CrossRef] [PubMed]
- Xu, W.; Zhu, S.; Lian, Y.; Li, Z.; Cui, Z.; Yang, X.; Inoue, A. Nanoporous CuS with excellent photocatalytic property. Sci. Rep. 2015, 5, 18125. [Google Scholar] [CrossRef] [PubMed]
- An, H.R.; Park, S.Y.; Kim, H.; Lee, C.Y.; Choi, S.; Lee, S.C.; Seo, S.; Park, E.C.; Oh, Y.K.; Song, C.G.; et al. Advanced nanoporous TiO2 photocatalysts by hydrogen plasma for efficient solar-light photocatalytic application. Sci. Rep. 2016, 6, 29683. [Google Scholar] [CrossRef] [PubMed]
- Geng, Z.; Zhang, Y.; Yuan, X.; Huo, M.; Zhao, Y.; Lu, Y.; Qiu, Y. Incorporation of Cu2O nanocrystals into TiO2 photonic crystal for enhanced UV-visible light driven photocatalysis. J. Alloys Compd. 2015, 644, 734–741. [Google Scholar] [CrossRef]
- Lu, Y.; Yu, H.; Chen, S.; Quan, X.; Zhao, H. Integrating plasmonic nanoparticles with TiO2 photonic crystal for enhancement of visible-light driven photocatalysis. Environ. Sci. Technol. 2012, 46, 1724–1730. [Google Scholar] [CrossRef] [PubMed]
- Sheng, X.; Liu, J.; Coronel, N.; Agarwal, A.M.; Michel, J.; Kimerling, L.C. Integration of self-assembled porous alumina and distributed Bragg reflector for light trapping in Si photovoltaic devices. IEEE Photonics Technol. Lett. 2010, 22, 1394–1396. [Google Scholar] [CrossRef]
- Guo, M.; Xie, K.; Wang, Y.; Zhou, L.; Huang, H. Aperiodic TiO2 nanotube photonic crystal: Full-visible-spectrum solar light harvesting in photovoltaic devices. Sci. Rep. 2014, 4, 6442. [Google Scholar] [CrossRef] [PubMed]
- Li, Y.; Fu, Z.Y.; Su, B.L. Hierarchically structured porous materials for energy conversion and storage. Adv. Funct. Mater. 2012, 22, 4634–4667. [Google Scholar] [CrossRef]
- Zheng, X.; Meng, S.; Chen, J.; Wang, J.; Xian, J.; Shao, Y.; Fu, X.; Li, D. Titanium dioxide photonic crystals with enhanced photocatalytic activity: Matching photonic band gaps of TiO2 to the absorption peaks of dyes. J. Phys. Chem. C 2013, 117, 21263–21273. [Google Scholar] [CrossRef]
- Santos, A.; Balderrama, V.S.; Alba, M.; Formentín, P.; Ferré-Borrull, J.; Pallarès, J.; Marsal, L.F. Nanoporous anodic alumina barcodes: Toward smart optical biosensors. Adv. Mater. 2012, 24, 1050–1054. [Google Scholar] [CrossRef] [PubMed]
- Jeon, G.; Yang, S.Y.; Byun, J.; Kim, J.K. Electrically actuatable smart nanoporous membrane for pulsatile drug release. Nano Lett. 2011, 11, 1284–1288. [Google Scholar] [CrossRef] [PubMed]
- Santos, A.; Aw, M.S.; Bariana, M.; Kumeria, T.; Wang, Y.; Losic, D. Drug-releasing implants: Current progress, challenges and perspective. J. Mater. Chem. B 2014, 2, 6157–6182. [Google Scholar] [CrossRef]
- Anglin, E.J.; Schwartz, M.P.; Ng, V.P.; Perelman, L.A.; Sailor, M.J. Engineering the chemistry and nanostructure of porous silicon Fabry-Pérot films for loading and release of a steroid. Langmuir 2004, 20, 11264–11269. [Google Scholar] [CrossRef] [PubMed]
- Wu, E.C.; Andrew, J.S.; Cheng, L.; Freeman, W.R.; Pearson, L.; Sailor, M.J. Real-time monitoring of sustained drug release using the optical properties of porous silicon photonic crystal particles. Biomaterials 2011, 32, 1957–1966. [Google Scholar] [CrossRef] [PubMed]
- Low, S.P.; Williams, K.A.; Canham, L.T.; Voelcker, N.H. Evaluation of mammalian cell adhesion on surface-modified porous silicon. Biomaterials 2006, 27, 4538–4546. [Google Scholar] [CrossRef] [PubMed]
- Burham, N.; Hamzah, A.A.; Yunas, J.; Majlis, B.Y. Electrochemically etched nanoporous silicon membrane for separation of biological molecules in mixture. J. Micromech. Microeng. 2017, 27, 075021. [Google Scholar] [CrossRef]
- Alsawat, M.; Altalhi, T.; Santos, A.; Losic, D. Carbon nanotubes-nanoporous anodic alumina composite membranes: Influence of template on structural, chemical and transport properties. J. Phys. Chem. C 2018, 121, 13634–13644. [Google Scholar] [CrossRef]
- Altalhi, T.; Kumeria, T.; Santos, A.; Losic, D. Synthesis of well-organised carbon nanotube membranes for tuneable ionic transport from non-degradable commercial plastic bags: Towards nanotechnological recycling. Carbon 2013, 63, 423–433. [Google Scholar] [CrossRef]
© 2018 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).