Skip Content
You are currently on the new version of our website. Access the old version .
  • This is an early access version, the complete PDF, HTML, and XML versions will be available soon.
  • Article
  • Open Access

6 February 2026

Site-Specific Hydrocarbon-Degrading Bacteria Consortium Developed Using Functional and Genomic Analyses

,
,
,
,
and
Department for Innovation in Biological, Agro-Food and Forest Systems (DIBAF), University of Tuscia, Via S. Camillo De Lellis, 01100 Viterbo, Italy
*
Author to whom correspondence should be addressed.
Appl. Sci.2026, 16(3), 1671;https://doi.org/10.3390/app16031671 
(registering DOI)
This article belongs to the Special Issue Human Impacts on Environmental Microbial Communities

Abstract

Bioaugmentation, defined as the strategic incorporation of specifically selected microbial biomass into contaminated environments, can significantly enhance the biodegradation of pollutants and is extensively employed in soil bioremediation efforts. A multistep screening process was applied to develop an autochthonous microbial consortium, including (i) hydrocarbonoclastic strain isolation from soil chronically contaminated with petroleum hydrocarbons, (ii) bacterial selection according to genomic and functional traits, and (iii) consortium validation in the native contaminated soil through microcosm experiments. The selection of strains with the ability to degrade alkanes and aromatic hydrocarbons on synthetic media was further supported by genomic analysis, delivering a consortium with complementary degradative properties. The outcomes of the microcosm experiments corroborated the efficacy of the selected indigenous consortium, demonstrating that the combination of Acinetobacter guillouiae, A. radioresistens, and Pseudomonas zarinae as an inoculum in the bioaugmentation strategy was successful in achieving the removal of up to 26% and 76% of linear and polycyclic aromatic hydrocarbons, respectively, thereby effectively addressing areas where natural attenuation was insufficient.

Article Metrics

Citations

Article Access Statistics

Article metric data becomes available approximately 24 hours after publication online.